Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. 2014
  2. Published

    User Interpretations of Virtual Prototypes: Physical Place Matters

    Kaapu, T., Tiainen, T. & Ellman, A., 2014, In : Scandinavian Journal of Information Systems. 25, 2, p. 1-22 22 p., 4.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    Using a data-centric event-driven architecture approach in the integration of real-time systems at DTP2

    Tuominen, J., Viinikainen, M., Alho, P. & Mattila, J., 2014, In : Fusion Engineering and Design. 89, 9-10, p. 2289-2293 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Verification and Validation of a Pressure Control Unit for Hydraulic Systems

    Boström, P., Heikkilä, M., Huova, M., Waldén, M. & Linjama, M., 2014, 6th International Workshop, SERENE 2014, Budapest, Hungary, October 15-16, 2014. Springer International Publishing, p. 101-115 15 p. (Lecture Notes in Computer Science; vol. 8785).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Vibration analysis and robust control of highly deformable beams in a heavy pinched loop configuration

    Sharma, N., Kern, D. & Seemann, W., 2014, In : Zeitschrift fur Angewandte Mathematik und Physik. p. 1-14 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    Virtual prototypes reveal more development ideas: comparison between customers' evaluation of virtual and physical prototypes

    Tiainen, T., Ellman, A. & Kaapu, T., 2014, In : Virtual and Physical Prototyping. 9, 3, p. 169-180 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    VTT Technical Research Centre of Finland and Tampere University of Technoloy

    Ventä, O. & Huhtala, K., 2014, Tampere: FIMECC Oy. 3 p. (FIMECC Publications Series; no. 2)

    Research output: Book/ReportCommissioned reportProfessional

  8. Published

    Water Hydraulics Pushes Into High-Pressure Systems

    Koskinen, K. T. & Aaltonen, J., 2014, In : Hydraulics & Pneumatics. 67, 2, p. 84-89 4 p.

    Research output: Contribution to journalArticleProfessional

  9. 2013
  10. Published

    3D numerical modelling of bit-rock fracture mechanisms in percussive drilling with a multiple-button bit

    Saksala, T., 2013, In : International Journal for Numerical and Analytical Methods in Geomechanics. 37, 3, p. 309-324

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    A builder for adaptable human machine interfaces for mobile devices

    Neira, O., Nieto Lee, A., Martinez Lastra, J. L. & Camp, R. S., 2013, Proceedings 2013 11the IEEE international conference on industrial informatics INDIN, Bochum, Germany, July 29-31, 2013. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 750-755 6 p. (IEEE international conference on industrial informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Advanced analysis of complex signals

    Saramäki, T., 2013, In : Public Service Review. 25, p. 314-315 2 p.

    Research output: Contribution to journalArticleGeneral public

  13. Published

    Advanced concepts for flexible data integration in heterogeneous production environments

    Dennert, A., Garcia Izaguirre Montemayor, J., Krause, J., Hesse, S., Martinez Lastra, J. L. & Wollschlaeger, M., 2013, 11th IFAC Workshop on intelligent manufacturing systems, The international federation of automatic control, May 22-24, 2013. São Paulo, Brazil. Tsuzuki, M. D. S. G. & José, R. (eds.). International Federation of Automatic Control IFAC, p. 348-353 6 p. (Elsevier IFAC Publications / IFAC Proceedings series; vol. 11).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    A genetic algorithm for optimizing vector-based paths of industrial manipulators

    Gonzalez Moctezuma, L. E., Nieto Lee, A. & Martinez Lastra, J. L., 2013, INDIN 2013, IEEE international conference on industrial informatics, Bochum, Germany, July 29-31, 2013. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 286-292 8 p. (IEEE international conference on industrial informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Agent-based control of operational conditions for smart factories: the peak load management scenario

    Florea, A., Lauttamus, J., Postelnicu, C. & Martinez Lastra, J. L., 2013, Industrial applications of holonic and multi-agent systems, Proceedings of 6th international conference, HoloMAS 2013, Prague, Czech Repulic, August 26-28, 2013. Marik, V., Martinez Lastra, J. L. & Skobelev, P. (eds.). Berlin: Springer, p. 83-94 (Lecture Notes in Computer Science; vol. 8062).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Aircraft Hydraulic Fluid On-Line Condition Monitoring System for Maintenance and Troubleshooting Purposes

    Alarotu, V., Aaltonen, J., Koskinen, K. T. & Siitonen, M., 2013, Proceedings of the 4th CEAS Conference in Linköping, 2013. Melin, T., Krus, P., Vinterhav, E. & Övrebö, K. (eds.). Linköping: Linköping University Electronic Press, p. 188-195 8 p. (International Conference of the European Aerospace Societies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Aligning product design methods and tools for sustainability

    Nahkala, S., 2013, Proceedings of the 20th CIRP, International Conference on life cycle engineering, Singapore, 17-19 April, 2013. Nee, A. Y. C., Song, B. & Ong, S-K. (eds.). Springer Singapore, p. 53-58 6 p. (Re-engineering manufacturing for sustainability).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    A measurement-integrated solution for particle image velocimetry and volume fraction measurements in a fluidized bed

    Kolehmainen, J., Elfvengren, J. & Saarenrinne, P., 2013, In : International Journal of Multiphase Flow. 56, p. 72-80 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Analysis of the stress raising action of flaws in laser clad deposits

    Alam, M. M., Kaplan, A. F. H., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkala, J., Peltola, T. & Barsoum, Z., 2013, In : Materials and Design. 46, April, p. 328-337 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    An approach for OSGi and DPWS interoperability: bridning enterprise application with shop-floor

    Iarovyi, S., Garcia, J. & Martinez Lastra, J. L., 2013, Proceedings 2013 11the IEEE international conference on industrial informatics INDIN, Bochum, Germany, July 29-31, 2013. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 200-205 6 p. (IEEE international conference on industrial informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    An Energy-Efficient High Performance Motion Control of a Hydraulic Crane Applying Virtual Decomposition Control

    Koivumäki, J. & Mattila, J., 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) November 3-7, 2013, Tokyo, Japan. Institute of Electrical and Electronics Engineers IEEE, p. 4426-4433 8 p. (IEEE/RSJ International Conference on Intelligent Robots and Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    A New Hybrid Approach for Augmented Reality Maintenance in Scientific Facilities

    Martinez, H., Laukkanen, S. & Mattila, J., 2013, In : international Journal of Advanced Robotic Systems. 10, p. 1-10 10 p., 321.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    A New technique for torsional vibration measurements with digital image correlation

    Hasanen, M., Saarenrinne, P. & Kokko, V., 2013, The 26th International Congress of Condition Monitoring and Diagnostic Engineering Management, COMADEM 2013, 11-13 June, Helsinki. 6 p. (International Congress of Condition Monitoring and Diagnostic Engineering Management).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    An extended second order polynomial model for hydraulic fluid density

    Karjalainen, J. P., Karjalainen, R. & Huhtala, K., 2013, Proceedings of the ASME/BATH 2013 Symposium on Fluid Power and Motion Control, FPMC2013, October 6-9, 2013, Sarasota, Florida. Sarasota, Florida, USA: ASME, p. 1-8 8 p. (Symposium on Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    A Novel Time Optimal Path Following Controller with Bounded Velocities for Mobile Robots with Independently Steerable Wheels

    Oftadeh, R., Ghabcheloo, R. & Mattila, J., 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) November 3-7, 2013, Tokyo, Japan. Institute of Electrical and Electronics Engineers IEEE, p. 4845-4851 7 p. (IEEE/RSJ International Conference on Intelligent Robots and Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    A perfect fit

    Lehtinen, J., Pajunen, S. & Heinonen, O., 2013, In : Ansys Advantage. 7, 2, p. 26-29 4 p.

    Research output: Contribution to journalArticleProfessional

  27. Published

    A positive tensions PID controller for a planar cable robot: An experimental study

    Khosravi, M. A., Taghirad, H. D. & Oftadeh, R., 2013, 2013 1st RSI/ISM International Conference on Robotics and Mechatronics, ICRoM 2013, Tehran, Iran, 13.-15.2.2013. p. 325-330 6 p. (International Conference on Robotics and Mechatronics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    ARC - Arktinen ajoneuvo- ja työkonetestaustoiminta

    Aaltonen, K., Haataja, M., Hietala, J-P., Leinonen, O., Moilanen, M., Multanen, P., Mäkinen, E., Petursdottir, J., Popov, M. & Väisänen, I., 2013, Oulun yliopisto. 122 p. (Oulun Yliopisto. Konetekniikan osasto. Raportti; vol. 133)

    Research output: Book/ReportCommissioned reportProfessional

  29. Published

    Assessment of IEC-61499 and CDL for function block composition in factory-wide system integration

    Ramis, B., Garcia, J. & Martinez Lastra, J. L., 2013, Proceedings 2013 IEEE international conference on industrial informatics INDIN, Bochum, Germany, July 29-31, 2013. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 212-217 6 p. (IEEE international conference on industrial informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Automatic design of marine structures by using successive response surface method

    Pajunen, S. & Heinonen, O., 2013, In : Structural and Multidisciplinary Optimization. p. 1-9 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Betonin ajasta riippumattomat materiaalimallit

    Kouhia, R., 2013, Unknown Publisher. 83 p. (Liikenneviraston tutkimuksia ja selvityksiä; no. 38)

    Research output: Book/ReportCommissioned reportProfessional

  32. Published

    Bounded-Velocity Motion Control of Four Wheel Steered Mobile Robots

    Oftadeh, R., Aref, M. M., Ghabcheloo, R. & Mattila, J., 2013, 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2013, Mechatronics for Human Wellbeing, July 9-12, 2013, Wollongong, Australia. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 255-260 6 p. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Breaking down the requirements: Reliability in remote handling software

    Alho, P. & Mattila, J., 2013, In : Fusion Engineering and Design. 88, 9-10, p. 1912-1915 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    Capability-Based Adaptation of Production Systems - Practical Case Study in TUT-Microfactory Environment

    Järvenpää, E., Lanz, M. & Tuokko, R., 2013, 5th International conference on advanced design and manufacture, 25-28 September 2013, Valencia, Spain. Su, D. & Zhu, S. (eds.). Trans Tech Publications, p. 245-248 4 p. (Key Engineering Materials; vol. 572).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Capability-Based Approach for Evaluating the Impact of Product Requirement Changes on the Production System

    Järvenpää, E. & Torvinen, S., 2013, 23rd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 13, The challenge of sustaining global competitive manufacturing system, 26-28 June 2013 Porto Portugal, Advances in Sustainable and Competitive Manufacturing Systems. Azevedo, A. (ed.). Switzerland: Springer International Publishing, p. 173-185 13 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Capability-based ontological resource model and rules for describing and assigning resources in sheet metal manufacturing

    Järvenpää, E., Lohtander, M. & Tuokko, R., 2013, 2013 IEEE International Symposium of Assembly and Manufacturing (ISAM), July 30th – Aug 2nd 2013, Xi’an, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 105-108 3 p. (International Symposium on Assembly and Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Capability of the turret punch press process: Intelligence between design and manufacturing

    Lohtander, M., Järvenpää, E. & Varis, J., 2013, 2013 IEEE International Symposium of Assembly and Manufacturing (ISAM), July 30th – Aug 2nd 2013, Xi’an, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 180-182 3 p. (International Symposium on Assembly and Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Case study on the relation of PLM maturity, architecture and business processes

    Pulkkinen, A., Vainio, V. & Rissanen, N., 2013, Product Lifecycle Management for Society, Proceedings of 10th IFIP WG 5.1 International conference, PLM 2013, Nantes, France, July 6-10, 2013,. Bernard, A., Rivest, L. & Dutta, D. (eds.). Berlin: Springer, p. 432-438 7 p. (IFIP Advances in Information and Communication Technology; vol. 409).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Combined Virtual Iron Bird and Hardware-in-the-Loop Simulation Research Environment for Jet Fighter Hydraulic Systems

    Alarotu, V., Aaltonen, J., Koskinen, K. T. & Siitonen, M., 2013, Proceedings of the 4th CEAS Conference in Linköping, 2013. Melin, T., Krus, P., Vinterhav, E. & Övrebö, K. (eds.). Linköping: Linköping University Electronic Press, p. 196-202 7 p. (International Conference of the European Aerospace Societies; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Comparison of low-and high-fidelity approach in model based design in the case of a portable motion platform

    Ellman, A. U., Krus, P. & Jouppila, V., 2013, Proceedings of the 19th International Conference on Engineering Design, ICED13, Design for Harmonies, Vol 9: Design Methods and Tools, 19th-22nd August 2013, Sungkyunkwan University, Seoul, Korea. Lindemann, U., Venkataraman, S., Kim, Y. S., Lee, S. W., Papalambros, P. & Chen, W. (eds.). Scotland: The Design Society, p. 227-236 10 p. (International Conference on Engineering Design).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Computer-Assisted Bilateral Teleoperation System for Water Hydraulic Manipulator

    Viinikainen, M., Mattila, J. & Tuominen, J., 2013, The 8th International Conference on Fluid Power Transmission and Control, ICFP 2013, April 9-11, 2013, Zhejiang University, Hangzhou, China. Yongxiang, L., Qingfeng, W., Bingfeng, J. & Jun, Z. (eds.). p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Concept of product development simulator for an excavator using a haptic device

    El Dirdiry, O. & Ellman, A., 2013, Proceedings of the 19th International Conference on Engineering Design, ICED13, Design for Harmonies, Vol 9: Design Methods and Tools, 19th-22nd August 2013, Sungkyunkwan University, Seoul, Korea. Lindemann, U., Venkataraman, S., Yong, S., Lee, S. W., Papalambros, P. & Chen, W. (eds.). Scotland: The Design Society, p. 031-038 8 p. (International Conference on Engineering Design).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Conjugate heat transfer in a plate - One surface at constant temperature and the other cooled by forced or natural convection

    Lindstedt, M. & Karvinen, R., 2013, In : International Journal of Heat and Mass Transfer. 66, p. 489-495 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    Considering product related aspects on design and development of production systems

    Nylund, H., Järvenpää, E. & Andersson, P. H., 2013, Proceedings of the PDM2013 conference, The 1st PDM Forum for Finland-Russia Collaboration, 24.-25.4.2013, Lappeenranta. Huhtala, M. & Eskelinen, H. (eds.). Lappeenranta: Lappeenranta University of Technology, p. 23-28 6 p. (LUT Scientific and Expertise Publication. Tutkimusraportit; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  45. Published

    Control arrangement of an electro-hydraulic gas exchange valve actuation system

    Herranen, M., Huhtala, K. & Virvalo, T., 2013, Patent No. Pat. EP 2 529 090 B1, Priority date 3 Jul 2013, Priority No. (30) FI 20105082

    Research output: PatentScientific

  46. Published

    Current research in component cleanliness of fluid power

    Rinkinen, J., Elo, L., Kuosku, M. & Pekkonen, J., 2013, The Tenth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM2013/MFPT2013, 18-20 June 2013, Krakow, Poland. Coxmoor Publishing, 17 p. (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Decision support tool for retrofitting a district towards district as a service

    Florea, A., Postelnicu, C., Martinez Lastra, J. L., Larranaga, M., Marquez Contreras, J. A., Presser, M., Plambech, T., Colino, A. & Bayona Pons, V. M., 2013, Conference booklet, IECON 2013, 39th Annual Conference of the IEEE Industrial Electronics Society in conjunction with IWIES 2013: 1st International workshop on intelligent energy systems, Austria Center, Vienna, Austria, 10-14 November 2013. Piscataway, NJ: Institute of Electrical and Electronics Engineers, IEEE, p. 70-75 6 p. (Annual Conference of the IEEE Industrial Electronics Society).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Detection and isolation of faults in mobile hydraulic valves based on a reduced-order model and adaptive thresholds

    Nurmi, J. & Mattila, J., 2013, Proceedings of ASME/BATH 2013 Symposium on Fluid Power and Motion Control, FPMC2013, October 6-9, 2013, Sarasota, Florida. Sarasota, Florida, USA: ASME, p. 1-10 10 p. (Symposium on Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Development of a complete contact fretting test device

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 2013, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 227, 6, p. 570-578

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    Digitaalihydrauliikan seminaarin satoa Tampereella

    Linjama, M., 2013, In : Fluid Finland. 12, 1, p. 8-8 1 p.

    Research output: Contribution to journalArticleProfessional

  51. Published

    Displacement control of a mobile crane using a digital hydraulic power management system

    Heikkilä, M. & Linjama, M., 2013, In : Mechatronics. 23, 4, p. 452-461 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  52. Published

    Divertor cassette locking system remote handling trials with WHMAN at DTP2

    Lyytikäinen, V., Kinnunen, P., Koivumäki, J., Mattila, J., Siuko, M., Esque, S. & Palmer, J., 2013, In : Fusion Engineering and Design. 88, 9-10, p. 2181-2185 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1...7 8 9 10 11 12 13 14 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.