Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. 2013
  2. Published

    Early design verification of ITER remote handling systems using Digital Mock-Ups within simulation lifecycle environment

    Sibois, R., Määttä, T., Siuko, M. & Mattila, J., 2013, 2013 IEEE 25th Symposium on Fusion Engineering, SOFE 2013, San Francisco, CA, USA, 10.-14.6.2013. Institute of Electrical and Electronics Engineers IEEE, p. 1-6 6 p. (IEEE Symposium on Fusion Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Effects of strain and strain rate on the abrasive wear behavior of high manganese austenitic steel

    Lindroos, M., Kuokkala, V-T., Lehtovaara, A. & Kivikytö-Reponen, P., 2013, In : Key Engineering Materials. 527, p. 211-216 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Energy Efficiency of Digital Hydraulic Valve Control Systems

    Huova, M., Linjama, M. & Huhtala, K., 2013, SAE 2013 Commercial Vehicle Engineering Congress (COMVEC), October 1-3, 2013, Rosemont, Illinois, USA. 13 p. (SAE Technical Papers).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Engineering intelligence - Product-service concepts and requirements in industry

    Lanz, M., Nykänen, O., Aaltonen, J., Ranta, P. A., Koskinen, K. T. & Andersson, P. H., 2013, 2013 IEEE International Symposium on Assembly and Manufacturing (ISAM), July 30th – Aug 2nd 2013, Xi’an, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 138-141 4 p. (International Symposium on Assembly and Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Enhancement of industrial monitoring systems by utilizing context awareness

    Nieto Lee, A. & Martinez Lastra, J. L., 2013, 3rd IEEE International Multi-Disciplinary Conference on Cognitive Methods in Situation Awareness and Decision Support (CogSIMA), February 26-28, 2013, San Diego, CA, USA. Piscataway: Institute of Electrical and Electronics Engineers, IEEE, p. 277-284 8 p. (IEEE International Multi-Disciplinary Conference on Cognitive Methods in Situation Awareness and Decision Support).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Enhancement of the use of digital mock-ups in the verification and validation process for ITER remote handling systems

    Sibois, R., Salminen, K., Siuko, M., Mattila, J. & Määttä, T., 2013, In : Fusion Engineering and Design. 88, 9-10, p. 2190-2193 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    Epäsuoran jäähdytyksen väliaineet - ominaisuudet ja niiden merkitys

    Ahlstedt, H., 2013, Kylmätekniikan koulutuspäivät, 24.1.-25.1.2013, Suomen kylmäyhdistys ry Julkaisu. Suomen kylmäyhdistys, p. 1-22 22 p. (Kylmätekniikan koulutuspäivät; no. 73).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  9. Published

    Erratum: 3D numerical modelling of bit-rock fracture mechanisms in percussive drilling with a multiple-button bit (vol 37, pg 309, 2013)

    Saksala, T., 2013, In : International Journal for Numerical and Analytical Methods in Geomechanics. 37, 3, p. 325-330 6 p.

    Research output: Contribution to journalArticleScientific

  10. Published

    Evidence against a correlation between ease of use and actual use of a device in a walk-in virtual environment

    Tiainen, T., Ellman, A. & Kaapu, T., 2013, In : Human Technology: An Interdisciplinary Journal on Humans in ICT Environments Human Technology. 9, 1, p. 56-71 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Examples of technical cleanliness of fluid power components

    Kuosku, M., Pekkonen, J. & Rinkinen, J., 2013, The Tenth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM2013/MFPT2013, 18-20 June 2013, Krakow, Poland. Coxmoor Publishing, p. 1-12 12 p. (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Experiences of Online Measurements in Technical Cleanliness of Fluid Power System

    Elo, L., Pekkonen, J. & Rinkinen, J., 2013, The Tenth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM2013/MFPT2013, 18-20 June 2013, Krakow, Poland. Coxmoor Publishing, p. 1-9 9 p. (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Experimental results in Component Cleanliness of Fluid Power

    Rinkinen, J., Elo, L., Kuosku, M. & Pekkonen, J., 2013, The 26th International Congress of Condition Monitoring and Diagnostic Engineering Management, COMADEM 2013, 11-13 June, Helsinki. 8 p. (International Congress of Condition Monitoring and Diagnostic Engineering Management).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Failure Simulations with a Strain Rate Dependent Ductile-to-Brittle Transition Model

    Hartikainen, J., Kolari, K. & Kouhia, R., 2013, Numerical Methods for Differential Equations, Optimization, and Technological Problems. Repin, S., Tiihonen, T. & Tuovinen, T. (eds.). Springer, p. 431-444 14 p. (Computational Methods in Applied Sciences; vol. 27).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  15. Published

    Fatigue properties of laser clad round steel bars

    Tuominen, J., Näkki, J., Poutala, J., Miettinen, J., Peltola, T., Vuoristo, P., Rasehorn, I., Alam, M. & Kaplan, A., 2013, Proceedings of 32nd International Congress on Applications of Lasers & Electro-Optics ICALEO, October 6-10, 2013, Miami, FL, USA. Laser Institute of America, p. 998-1007 10 p. P140. (International Congress on Applications of Lasers and Electro-Optics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Fault-tolerant scheduling of stateful tasks in uniprocessor real-time systems

    Alexeev, P., Boström, P., Walden, M., Huova, M., Linjama, M. & Sere, K., 2013, 3rd International Conference on Pervasive Embedded Computing and Communication Systems, PECCS 2013, Barcelona, Spain, 19.-21.2.2013. Benavente-Peces, C. & Filipe, J. (eds.). SCITEPRESS, p. 189-194 6 p. (International Conference on Pervasive Embedded Computing and Communication Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Fretting fatigue and friction of quenched and tempered steel in dry contact with aluminum bronze

    Hintikka, J., Lehtovaara, A. & Mäntylä, A., 2013, In : Wear. 308, 1-2, p. 155-165 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Generic Microcontroller Board for Automated Heavy Machinery with Modular Control System

    Karhu, O. & Huhtala, K., 2013, SAE 2013 Commercial Vehicle Engineering Congress (COMVEC), October 1-3, 2013, Rosemont, Illinois, USA. SAE, p. 1-7 7 p. 2013-01-2386. (SAE Technical Papers).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Geometry-Aided Angular Acceleration Sensing of Rigid Multi-Body Manipulator Using MEMS Rate Gyros and Linear Accelerometers

    Vihonen, J., Honkakorpi, J., Mattila, J. & Visa, A., 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) November 3-7, 2013, Tokyo, Japan. Institute of Electrical and Electronics Engineers IEEE, p. 2514-2520 7 p. (IEEE/RSJ International Conference on Intelligent Robots and Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Geometry-Aided MEMS Motion State Estimation for Multi-Body Manipulators

    Vihonen, J., Honkakorpi, J., Mattila, J. & Visa, A., 2013, 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2013, Mechatronics for Human Wellbeing, July 9-12, 2013, Wollongong, Australia. Institute of Electrical and Electronics Engineers IEEE, p. 341-347 7 p. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Grid Resolution and Time Step Studies in the Case of URANS Simulation of a Cyclone Separator

    Karvinen, A. & Ahlstedt, H., 2013, The 7th Open Source CFD International Conference 2013, 24-25 October, Hamburg, Germany. p. 1-10 10 p. (Open Source CFD International Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Heat transfer phenomena and theories governing residual stress formation in glass tempering

    Karvinen, R., 2013, COST Action TU0905 Mid-term Conference on Structural Glass, Proceedings of Cost Action TU0905 Mid-term Conference on Structural Glass, Porec, Croatia, 18-19 April, 2013. Belis, J., Louter, C. & Mocibob, D. (eds.). London: CRC Press Taylor & Francis Group, p. 573-580 8 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  23. Published

    Hydraulic Cylinders

    Koskinen, K. T. & Aaltonen, J., 2013, Encyclopedia of Tribology. Wang, Q. J. & Chung, Y-W. (eds.). Springer US, p. 1709-1718 10 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  24. Published

    Hydraulic Energy Recovery in Displacement Controlled Digital Hydraulic System

    Heikkilä, M. & Linjama, M., 2013, Proceedings of the 13th Scandinavian International Conference on Fluid Power, 3-5 June, Linköping, Sweden. Scandinavian International Conference on Fluid Power, p. 1-7 7 p. (Scandinavian International Conference on Fluid Power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Hydraulics for High Inertia, Heavy Load Lifting Application - Comparing Different Options

    Kukkonen, S. & Mäkinen, E., 2013, The 8th International Conference on Fluid Power Transmission and Control, ICFP 2013, April 9-11, 2013, Zhejiang University, Hangzhou, China. Yongxiang, L., Qingfeng, W., Bingfeng, J. & Jun, Z. (eds.). p. 176-180 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Image Grey Scale Based Volume Fraction Measurements of Solid Granular Particles

    Kolehmainen, J., Elfvengren, J. & Saarenrinne, P., 2013, The 10th International Symposium on Particle Image Velocimetry - PIV13, Delft, The Netherlands, July 1-3, 2013. 8 p. (International Symposium on Particle Image Velocimetry).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  27. Published

    Impacts of Product Lifecycle and Production System Design on Competitive and Sustainable Production

    Nylund, H., Tapaninaho, M., Torvinen, S. & Andersson, P. H., 2013, 23rd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 13, The challenge of sustaining global competitive manufacturing systems, 26-28 June 2013 Porto Portugal, Advances in Sustainable and Competitive Manufacturing Systems. Azevedo, A. (ed.). Switzerland: Springer International Publishing, p. 3-13 11 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Improved energy efficiency and controllability of mobile work machines by reduced engine rotational speed

    Ahopelto, M., Backas, J., Ghabcheloo, R. & Huhtala, K., 2013, Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition, IMECE2013, November 15-21, 2013, San Diego, California, USA. ASME, p. 1-8 8 p. 64239. (ASME International Mechanical Engineerig Congress and Exposition).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Industrial applications of holonic and multi-agent systems, 6th International Conference HoloMAS 2013 , Prague, Czech Republic, August 26-28, 2013 Proceedings

    Marik, V. (ed.), Martinez Lastra, J. L. (ed.) & Skobelev, P. (ed.), 2013, Heidelberg: Springer. 2 p. (Lecture Notes in Computer Science; vol. 8062)

    Research output: Book/ReportAnthologyScientificpeer-review

  30. Published

    Information Flows and Design Intent in the Core of Future Product-Services in the Field of Manufacturing Industry

    Lanz, M., Järvenpää, E. & Andersson, P., 2013, 5th International conference on advanced design and manufacture, 25-28 September 2013, Valencia, Spain. Su, D. & Zhu, S. (eds.). Trans Tech Publications, p. 103-106 4 p. (Key Engineering Materials; vol. 572).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Information flows in future advanced manufacturing ecosystems

    Lanz, M., Majuri, M. & Tuokko, R., 2013, IFIP WG 5.7 International conference, APMS 2013, State College, PA, USA, September 9-12, 2013, Advances in Production Management Systems. Sustainable Production and Service Supply Chains. Prabhu, V., Taisch, M. & Kiritsis, D. (eds.). Springer Berlin Heidelberg, p. 70-77 8 p. (IFIP Advances in Information and Communication Technology; vol. 414).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Internal leakage fault detection for variable displacement axial piston pump

    Kivelä, T. & Mattila, J., 2013, Proceedings of ASME/BATH 2013 Symposium on Fluid Power and Motion Control, FPMC2013, October 6-9, 2013, Sarasota, Florida. p. 1-9 9 p. (Symposium on Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Interoperability of remote handling control system software modules at Divertor Test Platform 2 using middleware

    Tuominen, J., Rasi, T., Mattila, J., Siuko, M., Esque, S. & Hamilton, D., 2013, In : Fusion Engineering and Design. 88, 9-10, p. 2177-2180 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    Inverse Monitoring of Loading State with Output Measurements

    Dospel, V., Prokop, A., Ojala, P. & Miettinen, J., 2013, The 26th International Congress of Condition Monitoring and Diagnostic Engineering Management, COMADEM 2013, 11-13 June, Helsinki. p. 1-8 8 p. (International Congress of Condition Monitoring and Diagnostic Engineering Management).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    ISO 11783 compliant forest crane as a platform for automatic control

    Kalmari, J., Pihlajamäki, T., Hyyti, H., Luomaranta, M. & Visala, A., 2013, The 4th IFAC Conference on Modelling and Control in Agriculture, Horticulture and Post Harvest Industry, 28-30 August, 2013, Espoo, Finland. p. 164-169 6 p. (Elsevier IFAC Publications / IFAC Proceedings series).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Kantavuutta maaperään massastabiloinnilla

    Seppälä, J. & Rinkinen, J., 2013, In : Promaint. 27, 3, p. 42-44 3 p.

    Research output: Contribution to journalArticleProfessional

  37. Published

    Katsaus mikropolaariseen kontinuumimalliin

    Kouhia, R., 2013, In : Rakenteiden mekaniikka. 46, 3, p. 70-90 21 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    Lean, scalable and extendable ICT concept in a dynamically changing environment

    Lanz, M. & Tuokko, R., 2013, Proceedings of the PDM2013 conference, The 1st PDM Forum for Finland-Russia Collaboration, 24.-25.4.2013, Lappeenranta. Huhtala, M. & Eskelinen, H. (eds.). Lappeenranta: Lappeenranta University of Technology, p. 61-68 8 p. (LUT Scientific and Expertise Publication. Tutkimusraportit; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  39. Published

    Liikenteen kiitollisuudenvelka

    Montonen, J., 2013, In : Pikajalka. 13, 27, p. 3-3 1 p.

    Research output: Contribution to journalArticleGeneral public

  40. Published

    Local compression behaviour of moist wood at quasi static state

    Björkqvist, T., Moilanen, C., Saarenrinne, P., Koivisto, J., Miksic, A., Alava, M., Salminen, L. & Engberg, B. A., 2013, 8th International Fundamental Mechanical Pulp Research Seminar, 29 - 31 January, 2013, Åre, Sweden. p. 47-48 2 p. (International Fundamental Mechanical Pulp Research Seminar).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  41. Published

    Magnetomechanical coupled FE simulations of rotating electrical machines

    Belahcen, A., Fonteyn, K., Kouhia, R., Rasilo, P. & Arkkio, A., 2013, In : COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 32, 5, p. 1484-1499 16 p., 17095978.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Maintaining a dynamic view of semantic web services representing factory automation systems

    Puttonen, J., Lobov, A. & Martinez Lastra, J. L., 2013, IEEE 20th International Conference on Web Services June 27-July 2, 2013, Santa Clara Marriott, CA, USA. O´Connor, L. (ed.). Los Alamitos, CA: Institute of Electrical and Electronics Engineers, p. 419-426 8 p. (IEEE international conference on web services).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Mechatronic design of a four wheel steering mobile robot with fault-tolerant odometry feedback

    Oftadeh, R., Aref, M. M., Ghabcheloo, R. & Mattila, J., 2013, The 6th IFAC Symposium on Mechatronic Systems, IFAC MECH2013, April 10-12, 2013, Zhejiang University, Hangzhou, China. p. 663-669 7 p. (Elsevier IFAC Publications / IFAC Proceedings series).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    MEMS-based State Feedback Control of Multi-Body Hydraulic Manipulator

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), November 3-7, 2013, Tokyo, Japan. Institute of Electrical and Electronics Engineers IEEE, p. 4419-4425 7 p. (IEEE/RSJ International Conference on Intelligent Robots and Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Mems sensor network based anti-sway control system for articulated hydraulic crane

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2013, Proceedings of ASME/BATH 2013 Symposium on Fluid Power and Motion Control, FPMC2013, October 6-9, 2013, Sarasota, Florida. p. 1-9 9 p. (Symposium on Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Methods to reduce the CO2 concentration of educational buildings utilizing internal ventilation by transferred air

    Kalema, T. & Viot, M., 2013, In : Indoor Air. p. 1-10 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Micro and desktop factories for micro/meso-scale manufacturing applications and future visions

    Tuokko, R., Järvenpää, E., Heikkilä, R. & Nurmi, A., 2013, In : Applied Mechanics and Materials. 289, 2, p. 1-12 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    Micro-electromechanical System Sensors in Unscented Kalman Filter-based Condition Monitoring of Hydraulic Systems

    Nurmi, J., Honkakorpi, J., Vihonen, J. & Mattila, J., 2013, 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, July 9-12, 2013, Wollongong, Australia, AIM 2013 Conference Digest, Mechatronics for Human Wellbeing. IEEE; ASME, p. 354-361 (IEEE/ASME International Conference on Advanced Intelligent Mechatronics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Mixed Variable Formulations for Truss Topology Optimization

    Mela, K., 2013, Tampere: Tampere University of Technology. 132 p. (Tampere University of Technology. Publication; no. 1134)

    Research output: Book/ReportDoctoral thesisMonograph

  50. Published

    Modeling and Optimization of Plate Fins and Plate Fin Heat Sinks

    Lindstedt, M., 2013, Tampere: Tampere University of Technology. 70 p. (Tampere University of Technology. Publication)

    Research output: Book/ReportDoctoral thesisMonograph

  51. Published

    Modeling of Long-Term Behavior of Glassy Polymers

    Holopainen, S. & Wallin, M., 2013, In : Journal of Engineering Materials and Technology: Transactions of the ASME. 135, 1, 11 p., 011001.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1...8 9 10 11 12 13 14 15 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.