Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. 2013
  2. Published

    Mixed Variable Formulations for Truss Topology Optimization

    Mela, K., 2013, Tampere: Tampere University of Technology. 132 p. (Tampere University of Technology. Publication; no. 1134)

    Research output: Book/ReportDoctoral thesisMonograph

  3. Published

    Modeling and Optimization of Plate Fins and Plate Fin Heat Sinks

    Lindstedt, M., 2013, Tampere: Tampere University of Technology. 70 p. (Tampere University of Technology. Publication)

    Research output: Book/ReportDoctoral thesisMonograph

  4. Published

    Modeling of Long-Term Behavior of Glassy Polymers

    Holopainen, S. & Wallin, M., 2013, In : Journal of Engineering Materials and Technology: Transactions of the ASME. 135, 1, 11 p., 011001.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Modeling of Tangential Vibrations in Cylindrical Grinding Contact with Regenerative Chatter

    Järvenpää, V-M., Yuan, L., Kalbasi Shirvani, H. & Mehmood, F., 2013, Surveillance 7 - International conference, Institute of Technology of Chartres, France, October 29-30, 2013. 10 p. (International Conference Surveillance).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Modeling of the mechanical behavior of amorphous glassy polymers under variable loadings and comparison with state-of-the-art model predictions

    Holopainen, S., 2013, In : Mechanics of Materials. 66, p. 35-58 24 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Mopoiluni on manifesti

    Montonen, J., 2013, In : Pikajalka. 13, 26, p. 3-3 1 p.

    Research output: Contribution to journalArticleGeneral public

  8. Published

    Multi-objective optimization of electronics heat sink geometries

    Karvinen, R. & Lampio, K., 2013, Proceedings of IWHT2013, 2nd International Workshop on Heat Transfer Advances for Energy Conservation and Pollution Control, October 18-21, 2013, Xi'an, China. p. 1-8 8 p. (International Workshop on Heat Transfer Advances for Energy Conservation and Pollution Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    New energy efficient solutions to mobile machines

    Huhtala, K., Ahopelto, M., Heikkilä, M., Backas, J., Tammisto, J., Huova, M. & Linjama, M., 2013, The 8th International Conference on Fluid Power Transmission and Control, ICFP 2013, April 9-11, 2013, Zhejiang University, Hangzhou, China. Yongxiang, L., Qingfeng, W., Bingfeng, J. & Jun, Z. (eds.). p. 38-52 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Numerical modeling and experimentation of dynamic Brazilian disc test on Kuru granite

    Saksala, T., Hokka, M., Kuokkala, V-T. & Mäkinen, J., 2013, In : International Journal of Rock Mechanics and Mining Sciences. 59, April, p. 128-138 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Numerical modeling and experimentation of dynamic indentation with single and triple indenters on Kuru granite

    Saksala, T., Gomon, D., Hokka, M. & Kuokkala, V-T., 2013, Rock Dynamics and Applications - State of the Art, Proceedings of the first international conference on rock dynamics and applications, RocDyn-1, Lausanne, Switzerland, 6-8 June 2013. Zhao, J. & Li, J. (eds.). Boca Raton: CRC Press Taylor & Francis Group : A Belkema Book, p. 415-421 7 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  12. Published

    On the numerical solution of a micropolar continuum model

    Kouhia, R. & Niemi, A. H., 2013, Proceedings of the 26th Nordic Seminar on Computational Mechanics, Oslo, 23 - 25 October, 2013. Logg, A., Mardal, K. A. & Massing, A. (eds.). Center for Biomedical Computing, Simula Research Laboratory, p. 128-131 4 p. (Nordic Seminar on Computational Mechanics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  13. Published

    On the solution of non-linear diffusion equation

    Kouhia, R., 2013, In : Rakenteiden mekaniikka. 46, 4, p. 116-130 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Open Automation of Manufacturing Systems through Integration of Ontology and Web Services

    Garetti, M., Fumagalli, L., Lobov, A. & Martinez Lastra, J. L., 2013, 7th IFAC Conference on manufacturing modelling, management and control, June 19-21, 2013. Saint Petersburg, Russia. Bakhtadze, N., Chernyshov, K., Dolgui, A. & Lototsky, V. (eds.). International Federation of Automatic Control, p. 198-203 6 p. (Elsevier IFAC Publications / IFAC Proceedings series; vol. 7).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Optimal geometry of single fins and fin arrays

    Lindstedt, M. & Karvinen, R., 2013, Eurotherm Seminar No 96, Convective Heat Transfer Enhancement 17-18 September 2013, Royal Military Academy, Brussels, Belgium. Ecole Royale Militaire; von Karman Insitute for fluid dynamics; Universite de Valenciennes et du Hainaut-Cambresis, p. 1-6 6 p. 33

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Out-of-plane elastic buckling of truss beams

    Kouhia, R. & Fedoroff, A., 2013, In : Structural Engineering and Mechanics. 45, 5, p. 613-629 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Pääkirjoitus: Tehokkuutta sitähän se kaikki on

    Huhtala, K., 2013, In : Fluid Finland. 12, 1, p. 5-5 1 p.

    Research output: Contribution to journalArticleProfessional

  18. Published

    Palkin teknisen taivutusteorian historiasta

    Saksala, T., 2013, In : Rakenteiden mekaniikka. 46, 3, p. 55-69 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    PLM state of the practice and future challenges in globally networked manufacturing companies

    Pulkkinen, A., Rissanen, N. & Vainio, V., 2013, Proceedings of the PDM2013 conference, The 1st PDM Forum for Finland-Russia Collaboration, 24.-25.4.2013, Lappeenranta. Huhtala, M. & Eskelinen, H. (eds.). Lappeenranta: Lappeenranta University of Technology, p. 69-75 7 p. (LUT Scientific and Expertise Publication. Tutkimusraportit; no. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  20. Published

    Polkupyörä on rock!

    Montonen, J., 2013, In : Pikajalka. 13, 24, p. 3-3 1 p.

    Research output: Contribution to journalArticleGeneral public

  21. Published

    Polttoainekulut kuriin

    Huhtala, K., 2013, In : Fluid Finland. 12, 2, p. 14-16 3 p.

    Research output: Contribution to journalArticleProfessional

  22. Published

    Principles of Classification

    Lumme, V., 2013, Diagnostics and Prognostics of Engineering Systems: Methods and Techniques. Seifedine, K. (ed.). IGI Global, p. 55-73 19 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  23. Published

    Pro-active content managing system for efficient human machine interaction in data intensive environments

    Nieto Lee, A. N., Evchina, Y., Dvoryanchikova, A. & Martinez Lastra, J. L., 2013, Proceedings 2013 11th IEEE international conference on industrial informatics INDIN, Bochum, Germany, July 29-31, 2013. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 790-796 6 p. (IEEE international conference on industrial informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Process for Evaluation and Validation of Non-Original Components for Aircraft Hydraulic Systems

    Aaltonen, J., Alarotu, V., Koskinen, K. T. & Siitonen, M., 2013, Proceedings of the 4th CEAS Conference in Linköping, 2013. Melin, T., Krus, P., Vinterhav, E. & Övrebö, K. (eds.). Linköping: Linköping University Electronic Press, p. 693-699 7 p. (International Conference of the European Aerospace Societies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Product strategies in merchant ship and airliner industries

    Lehtinen, J., Lehtonen, T., Pakkanen, J. & Riitahuhta, A., 2013, Proceedings of the 19th International Conference on Engineering Design, ICED 13, Design for Harmonies, Vol 3: Design Organisation and Management, 19th-22nd August 2013, Sungkyunkwan University, Seoul, Korea. Lindemann, U., Venkataraman, S., Kim, Y. S., Lee, S. W., de Weck, O. & Hong, Y. S. (eds.). Scotland: The Design Society, p. 201-210 10 p. (International Conference on Engineering Design).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Puhtaus on puoli hydrauliikkaa

    Kuosku, M. & Rinkinen, J., 2013, In : Promaint. 27, 5, p. 34-36 3 p.

    Research output: Contribution to journalArticleProfessional

  27. Published

    Pyörät ja pyssyt

    Kylliäinen, M., Partanen, S., Ojanen, O. J., Tikander, V., Katjamäki, T., Kortti, J., Piltz, M., Lempinen, O., Lehtonen, T., Lehtomäki, K. & Lilja, E., 2013, Kahdella pyörällä. Kirsi, L. (ed.). 246: Mobilia säätiö, p. 71-77

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  28. Published

    Radial compression behavior of Norway spruce at high strain-rate

    Moilanen, C., Björkqvist, T., Saarenrinne, P., Engberg, B. A. & Salminen, L., 2013, 8th International Fundamental Mechanical Pulp Research Seminar, 29 - 31 January, 2013, Åre, Sweden. p. 10-11 2 p. (International Fundamental Mechanical Pulp Research Seminar).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  29. Published

    Real-Time Service-Oriented Architectures: A Data-Centric Implementation for Distributed and Heterogeneous Robotic System

    Alho, P. & Mattila, J., 2013, Proceedings of the 4th IFIP TC 10 International Embedded Systems Symposium, IESS 2013, Paderborn, Germany, June 2013.. Schirner, G., Götz, M., Rettberg, A., Zanella, M. C. & Rammig, F. J. (eds.). Springer, p. 262-271 10 p. (IFIP Advances in Information and Communication Technology; vol. 403).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Recognition of Operating States of a Medium-Sized Mobile Machine

    Krogerus, T., Hyvönen, M., Raivio, K. & Huhtala, K., 2013, Proceedings of the 13th Scandinavian International Conference on Fluid Power, 3-5 June, Linköping, Sweden. p. 1-10 10 p. (Scandinavian International Conference on Fluid Power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Recognition of Operating States of a Wheel Loader for Diagnostics Purposes

    Krogerus, T., Hyvönen, M. & Huhtala, K., 2013, In : SAE International Journal of Commercial Vehicles. 6, 2, p. 1-7 7 p., 2013-01-2409.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    Reliability requirements management for ITER Remote Handling maintenance systems

    Väyrynen, J. & Mattila, J., 2013, In : Fusion Engineering and Design. 88, 9-10, p. 1920-1923 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    Remote Handling Control System for Water Hydraulic Mover

    Tuominen, J. & Mattila, J., 2013, The 8th International Conference on Fluid Power Transmission and Control, ICFP 2013, April 9-11, 2013, Zhejiang University, Hangzhou, China. Yongxiang, L., Qingfeng, W., Bingfeng, J. & Jun, Z. (eds.). p. 387-391 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Retrospective study on teaching engineering design and product development

    Lehtonen, T., Juuti, T., Rättyä, K. & Vanhatalo, M., 2013, E&PDE 2013, the 15th international conference on engineering and product design education, Design education - Growing our future, Dublin, Ireland, 5-6 September, 2013. Bohemia, E., Ion, W., Kovacevic, A., Lawlor, J., McGrath, M., McMahon, C., Parkinson, B., Reilly, G., Ring, M., Simpson, R. & Tormey, D. (eds.). Glasgow: The Design Society, Institution of Engineering Designers, p. 414-419 6 p. (International Conference on Engineering and Product Design Education).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Semantic information management for user and context aware smart home with social services

    Evchina, Y., Dvoryanchikova, A. & Martinez Lastra, J. L., 2013, 3rd IEEE International Multi-Disciplinary Conference on Cognitive Methods in Situation Awareness and Decision Support (CogSIMA), February 26-28, 2013, San Diego, CA, USA. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 262-268 7 p. (International Multi-Disciplinary Conference on Cognitive Methods in Situation Awareness and Decision Support).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Semantics-Based Composition of Factory Automation Processes Encapsulated by Web Services

    Puttonen, J., Lobov, A. & Martinez Lastra, J. L., 2013, In : IEEE Transactions on Industrial Informatics. 9, 4, p. 2349-2359 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    Simulation of residual stresses and deformations in electron beam-welded copper canisters

    Aronen, A., Leikko, J., Taskinen, P. & Karvinen, R., 2013, Olkiluoto: Posiva. 68 p. (Posiva Working Report; no. 20)

    Research output: Book/ReportCommissioned reportProfessional

  38. Published

    Sliding wear of HVOF sprayed self-fluxing alloy matrix cermet particles reinforced composite coatings

    Surzhenkov, A., Antonov, M., Mikli, V., Latokartano, J., Vilgo, T. & Kulu, P., 2013, BALTTRIB´2013, VII International scientific conference, Aleksandras Stulginskis University, Kaunas, Lithuania, 14-15 November 2013. Padgurskas, J., Rukuiza, R., Kreivaitis, R. & Jankauskas, V. (eds.). p. 62-66 5 p. (Proceedings of the international conference BALTTRIB).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Sliding wear of TiC-NiMo and Cr3C2-Ni cermet particles reinforced FeCrSiB matrix HVOF sprayed coatings

    Surzhenkov, A., Antonov, M., Goljandin, D., Vilgo, T., Mikli, V., Viljus, M., Latokartano, J. & Kulu, P., 2013, In : Estonian Journal of Engineering. 19, 3, p. 203-211 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    Smart lighting in multipurpose outdoor environments: energy efficient solution using network of cooperating objects

    Florea, A., Farahat, A., Postelnicu, C., Martinez Lastra, J. L. & Azcondo Sanchez, F. J., 2013, Proceedings of 4th international workshop on networks of cooperating objects for smart cities 2013 (CONET/UBICITEC 2013), Philadelphia, USA, April 8, 2013. Fortino, G., Karnouskos, S., Marron, P. J. & Martinez Lastra, J. L. (eds.). CEUR-WS.org, p. 1-13 13 p. (CEUR Workshop Proceedings; vol. 1002).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Social Media in Manufacturing: Just Hype or Concrete Benefits?

    Lanz, M. & Torvinen, S., 2013, 23rd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 13, The challenge of sustaining global competitive manufacturing system, 26-28 June 2013 Porto Portugal, Advances in Sustainable and Competitive Manufacturing Systems. Azevedo, A. (ed.). Switzerland: Springer International Publishing, p. 1023-1034 (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Stability Analysis of Two Time Delays in Cylindrical Grinding Machine by D-subdivion Method

    Mehmood, F., Yuan, L., Järvenpää, V-M. & Heshmatimanesh, F., 2013, Proceedings in Research Conference in Technical Disciplines, RCITD 2013, 18.-22. November 2013, Slovak Republic. Mokrys, M., Badura, S. & Lieskovsky, A. (eds.). Zilina: EDIS, p. 53-57 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Stable and high performance energy-efficient motion control of electric load sensing controlled hydraulic manipulators

    Koivumäki, J. & Mattila, J., 2013, Proceedings of ASME/BATH 2013 Symposium on Fluid Power and Motion Control, FPMC2013, October 6-9, 2013, Sarasota, Florida. Sarasota, Florida, USA: ASME, p. 1-10 10 p. (Symposium on Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Stress raising in laser clad components depending on geometry and defects

    Kaplan, A. F. H., Alam, M. M., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkula, J., Peltola, T. & Barsoum, Z., 2013, The 14th Nordic Laser Materials Processing Conference, NOLAMP 14, August 26th - 28th 2013, Gothenburg, Sweden. Kaplan, A. & Engström, H. (eds.). Luleå: Luleå University of Technology, Department of Engineering Sciences and Mathematics, p. 281-292 12 p. (Nordic Laser Materials Processing Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  45. Published

    Super-FRS target area remote handling: Scenario and development

    Orona, L. M., Weick, H., Mattila, J., Amjad, F., Kozlova, E., Karagiannis, C., Behr, K-H. & Winkler, M., 2013, In : international Journal of Advanced Robotic Systems. 10, p. 1-9 9 p., 386.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Surface pore initiated fatigue failure in laser clad components

    Alam, M. M., Powell, J., Kaplan, A. F. H., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkala, J. & Peltola, T., 2013, In : Journal of Laser Applications. 25, 3, p. 032004/1-6 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Survey on Remote Handling Logistics for Super-FRS Regular Paper

    Amjad, F., Weick, H., Mattila, J., Orona, L. M., Kozlova, E., Winkler, M., Behr, K-H. & Karagiannis, C., 2013, In : international Journal of Advanced Robotic Systems. 10, p. 1-14 14 p., 348.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    Sustainability performance indicators for supporting the realization of sustainable and energy-efficient manufacturing

    Tapaninaho, M., Koho, M., Nylund, H., Heilala, J. & Torvinen, S., 2013, 23rd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 13, The challenge of sustaining global competitive manufacturing system, 26-28 June 2013 Porto Portugal, Advances in Sustainable and Competitive Manufacturing Systems. Azevedo, A. (ed.). Springer International Publishing, p. 1677-1688 12 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Täältä pesee - Hydraulikomponenttien pesukoneet ja nesteet kuntoon

    Elo, L., Kuosku, M. & Rinkinen, J., 2013, In : Promaint. 27, 5, p. 42-45 4 p.

    Research output: Contribution to journalArticleProfessional

  50. Published

    Talotekniikka

    Kalema, T. & Joutsi, J., 2013, Tampere: Tampereen teknillinen yliopisto. 6 p. (Tampereen teknillinen yliopisto. Rakennustekniikan laitos. Rakennustuotanto ja -talous. Raportti; vol. 14)

    Research output: Book/ReportCommissioned reportProfessional

  51. Published

    Test bench for measuring technical cleanliness of assembled fluid power components

    Pekkonen, J., Elo, L., Kuosku, M. & Rinkinen, J., 2013, The Tenth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM2013/MFPT2013, 18-20 June 2013, Krakow, Poland. Coxmoor Publishing, p. 1-13 13 p. (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1...9 10 11 12 13 14 15 16 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.