Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. 2012
  2. Published

    Discussion: Is the future of fluid power digital? Response

    Linjama, M., Scheidl, R. & Schmidt, S., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 226, I6, p. 726-727

    Research output: Contribution to journalArticleScientific

  3. Published

    Disrupted flow sensing impairs hydrodynamic performance and increases the metabolic cost of swimming in the yellowtail kingfish, Seriola Lalandi

    Yanase, K., Herbert, N. A. & Montgomery, J. C., 2012, In : Journal of Experimental Biology. 215, 22, p. 3944-3954

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Divertor RH design updates and DTP2 Phase 2 testing

    Siuko, M., Järvenpää, J. & Mattila, J., 2012, VALTION TEKNILLINEN TUTKIMUSKESKUS. 8 p. (VTT Science; vol. 7)

    Research output: Book/ReportCommissioned reportProfessional

  5. Published

    DSM made easy

    Halonen, N., Juuti, T. & Luostarinen, P., 2012, The 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Dorian, M., Mario, S., Neven, P. & Nenad, B. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, p. 1445-1454 (International Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Ecosystem oriented energy management: an implementation

    Florea, A., Postelnicu, C., Zhang, B. & Martinez Lastra, J. L., 2012, Proceedings of 2012 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2012, October 14-17 2012, COEX, Seoul, Korea. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 912-918 (IEEE International Conference on Systems, Man, and Cybernetics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    EFDA goal oriented training in remote handling - GOTRH

    Mattila, J., Alho, P., Väyrynen, J., Sibois, R. & Salminen, K., 2012, VALTION TEKNILLINEN TUTKIMUSKESKUS. 3 p. (VTT Science; vol. 7)

    Research output: Book/ReportCommissioned reportProfessional

  8. Published

    Effect of oil viscosity on filter performance in lubrication oil system

    Heiskanen, V., Mäkelä, T., Kapanen, P. & Rinkinen, J., 2012, Proceedings of the 11th World Filtration Congress & Exhibition, WFC11, April 16-20, 2012, Graz, Austria. Vienna, Austria: Gesellschaft Österreichischer Chemiker GÖCH, p. 1-15 15 p. (World Filtration Congress).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Elintarviketeollisuuden koneautomaation kehitys kaipaa tiivistämistä

    Sairiala, H. & Koskinen, K. T., 2012, In : Kehittyvä elintarvike. 23, 4, p. 12-13

    Research output: Contribution to journalArticleProfessional

  10. Published

    Embedded service oriented diagnostics based on energy consumption

    Postelnicu, C., Khajehzadeh, N. & Martinez Lastra, J. L., 2012, Proceedings of 2012 IEEE 6th International Conference on Information and Automation for Sustainability, ICIAFS 2012, 27-29 September, 2012, Beijing, China. Piscataway, NJ: IEEE, p. 42-46 (International Conference on Information and Automation for Sustainability).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Embedded service oriented monitoring for the energy aware factory

    Postelnicu, C., Zhang, B. & Martinez Lastra, J. L., 2012, Proceedings of 2012 IEEE 6th International Conference on Information and Automation for Sustainability, ICIAFS 2012, 27-29 September, 2012, Beijing, China. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 36-41 (International Conference on Information and Automation for Sustainability).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Energy efficient digital hydraulic valve control utilizing pressurized tank line

    Huova, M. & Linjama, M., 2012, Proceedings of the 8th International Fluid Power Conference Dresden, March 26-28, 2012. Dresden: Technische Universutät Dresden, Dresdner Verein zur Förderung der Fluidtechnik, p. 111-122 12 p. (International Fluid Power Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Energy Saving with Pump Control in Working Hydraulics

    Tikkanen, R., Ahola, V. & Uusi-Heikkilä, J., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 77-81 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Enhancement of security in the hierarchy model of control and automation by applying single sign-on approach for web services

    Jafary, P., Lobov, A. & Martinez Lastra, J. L., 2012, Proceedings of 10th International Conference on ICT and Knowledge Engineering, 21-23 November, 2012, Siam University, Bangkok, Thailand. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 252-259 (International Conference on ICT and Knowledge Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Evaluating the confidence level of prognostic predictions

    Lumme, V. & Pylvänen, M., 2012, 2012 IEEE Conference on Prognostics and Health Management PHM, 18-21 June 2012, Denver, CO, USA. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 1-6 6 p. (IEEE International Conference on Prognostics and Health Management).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Evaluating the structural complexity of a product family

    Rissanen, N., Malmqvist, J. & Pulkkinen, A., 2012, The 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Dorian, M., Mario, S., Neven, P. & Nenad, B. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, p. 1597-1604 (International Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Evaluation of the teaching of a simple theory through different teaching disciplines

    Saarenrinne, P., 2012, ICERI2012 Proceedings, 5th International Conference of Education, Research and Innovation 19.-21.11.2012, Madrid, Spain. Barcelona: International Association of Technology, Education and Development IATED, p. 939-942 (International Conference of Education, Research and Innovation).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Extrusion-coated sealing layers on ALD-Al2O3 coated polymer substrate: Interfacial and Adhesion properties

    Lahtinen, K., Johansson, P., Kääriäinen, T., Cameron, D. C. & Kuusipalo, J., 2012, TAPPI PLACE Conference 2012: Helping Me Do My Job Better, 6-9 May 2012, Seattle, WA, United States. p. 543-562 20 p. (TAPPI European PLACE Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Factors affecting to exploitation of modularity

    Lehtinen, J., Lehtonen, T., Juuti, T. & Riitahuhta, A., 2012, Proceedings of The Ninth Norddesign Conference 2012, 22-24 August, 2012, Aalborg, Denmark. Poul, K. H. J. R., Kaj, J. & Christian, T. (eds.). Aalborg, Denmark: Aalborg university, p. 1-10 10 p. (Norddesign conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Flexible gripper system for small optical assemblies - final tests and findings

    Prusi, T., Heikkilä, R., Ha, T. H., Song, J. Y., Lee, C. W. & Tuokko, R., 2012, Precision assembly technologies and systems. Proceedings of the 6th IFIP WG 5.5 International precision assembly seminar, IPAS 2012, 12-14 February, 2012, Chamonix, France. Svetan, R. (ed.). Heidelberg: Springer, p. 55-64 (IFIP Advances in Information and Communication Technology; vol. 371).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Formal modelling of complex event processing: a generic algorithm and its application to a manufacturing line

    Ahmad, W., Lobov, A. & Martinez Lastra, J. L., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway, NJ: IEEE, p. 380-385 (IEEE International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Free shape paths in industrial robots

    Gonzalez Moctezuma, L. E., Lobov, A. & Martinez Lastra, J. L., 2012, Proceedings of the 38th Annual Conference of the IEEE Industrial Electronics Society, IECON 2012, 25-28 October, 2012, Montreal, Quebec, Canada. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 3739-3743 (Annual Conference of the IEEE Industrial Electronics Society).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Fretting fatigue of quenched and tempered steel in contact with bronze

    Hintikka, J., Lehtovaara, A. & Mäntylä, A., 2012, 15th Nordic Symposium on Tribology, NordTrib 2012, 12-15 June 2012, Trondheim, Norway. Trondheim: NTNU Norwegian University of Science and Technology, p. 1-6 6 p. (Nordic Symposium on Tribology).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    From measurements data to information

    Krogerus, T., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop , November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 51-62 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Full-Field-menetelmä käänteisessä monitoroinnissa

    Miettinen, J. & Ojala, P., 2012, In : Promaint. 26, 5, p. 34-38

    Research output: Contribution to journalArticleProfessional

  26. Published

    Fundamentals of Digital Microhydraulic

    Linjama, M., 2012, Proceedings of the 8th International Fluid Power Conference, Dresden, March 26-28, 2012. Dresden: Technische Universität Dresden, Institute of Fluid Power, p. 385-396 (International Fluid Power Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Glass tempering modeling

    Schneider, J., Karvinen, R. & Nielsen, J., 2012, COST Training School "Structural Glass", Presentation Handouts, Ghent University, Ghent, Belgium, April 2-6, 2012. University Press BVBA, p. 281-309 (COST Action TU0905 "Structural Glass - Novel Design Methods and Next Generation Products").

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  28. Published

    Hydrauliikan aika ei ole ohi - The time of hydraulics is not over

    Linjama, M., 2012, In : Fluid Finland. 11, 2, p. 10-12

    Research output: Contribution to journalArticleProfessional

  29. Published

    IHA:n KompuNW-testipenkillä tehtyjä mittauksia

    Pekkonen, J., Elo, L., Kuosku, M. & Rinkinen, J., 2012, KompuNW -verkostoseminaari TTY:ssa 9.10.2012. Tampere: Tampere University of Technology, IHA - Department of Intelligent Hydraulics and Automation, p. 1-16 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  30. Published

    Implementation of a digital hydraulic valve system with Bosch Rexroth sec valves

    Ketonen, M., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 161-174 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Improvement of Quality of tempered Glass with Numerical Modeling

    Aronen, A. & Karvinen, R., 2012, Challenging Glass 3, Conference on Architectural and Structural Applications of Glass, 28-29 June 2012, Delft, The Netherlands. Bos, F., Louter, C., Nijsse, R. & Veer, F. (eds.). Amsterdam, The Netherlands: IOS Press, p. 363-372 (Conference on Architectural and Structural Applications of Glass).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Improving damping characteristics of displacement controlled digital hydraulic system

    Heikkilä, M. & Linjama, M., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intellidgent Hydraulics and Automation, p. 75-88 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Improving energy efficiency and productivity of existing hydraulic systems by retrofittable digital hydraulics

    Ketonen, M., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 63-66 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Improving manufacturing process sustainability and performance with technology change

    Koho, M., Kirman, B., Tapaninaho, M., Nylund, H. & Torvinen, S., 2012, The 10th Global Conference on Sustainable Manufacturing, GCSM 2012, 31 October - 2 November, 2012, Istanbul, Turkey. Seliger, G. & Kylyc, S. E. (eds.). GCSM, p. 754-758 (Global Conference on Sustainable Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Is the future of fluid power digital?

    Scheidl, R., Linjama, M. & Schmidt, S., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 226, 6, p. 721-723

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    Käyttövarmuuden hallinta - standardista käytäntöön

    Ahonen, T., Jännes, J., Kunttu, S., Valkokari, P., Venho-Ahonen, O., Välisalo, T., Ellman, A., Hietala, J-P., Multanen, P., Mäkiranta, A., Saarinen, H. & Franssila, H., 2012, Espoo: VALTION TEKNILLINEN TUTKIMUSKESKUS. 73 p. (VTT Technology; vol. 69)

    Research output: Book/ReportCommissioned reportProfessional

  37. Published

    Käyttövarmuussuunnittelun kehittämistarpeet

    Valkokari, P., Ahonen, T., Franssila, H., Itäsalo, A., Jännes, J., Välisalo, T. & Ellman, A., 2012, Espoo: VALTION TEKNILLINEN TUTKIMUSKESKUS. 52 p. (VTT Working Papers; vol. 180)

    Research output: Book/ReportCommissioned reportProfessional

  38. Published

    Käyttövarmuustiedon hallinta ja hyödyntäminen suunnittelussa

    Franssila, H., Kunttu, S., Saarinen, H. & Valkokari, P., 2012, Espoo: VALTION TEKNILLINEN TUTKIMUSKESKUS. 47 p. (VTT Technology; vol. 48)

    Research output: Book/ReportCommissioned reportProfessional

  39. Published

    Key performance indicators for energy efficient asset management in a factory automation testbed

    Zhang, B., Postelnicu, C. & Martinez Lastra, J. L., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 391-396 (International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Kitkaväsymisen tuomat haasteet

    Juoksukangas, J. & Lehtovaara, A., 2012, In : Materia. 70, 5, p. 56-57

    Research output: Contribution to journalArticleProfessional

  41. Published

    Kokemuksia inline- ja online-mittauksista - ISO/SAE -standardit

    Elo, L., Pekkonen, J. & Rinkinen, J., 2012, KompuNW -verkostoseminaari TTY:ssa 9.10.2012. Tampere: Tampere University of Technology, IHA - Department of Intelligent Hydraulics and Automation, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  42. Published

    Komponentin ja järjestelmän elinkaaren mallintaminen analyyttisillä menetelmillä

    Aaltonen, J., 2012, Hydraulijärjestelmien modernisointi, 21.-22.3.2012, Suomen ilmailumuseo, Vantaa, Kunnossapitoyhdistys. Helsinki: Kunnossapitoyhdistys ProMaint, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  43. Published

    Laminated manifold for digital hydraulics - principles, challenges and benefits

    Paloniitty, M., Karvonen, M., Linjama, M. & Tiainen, T., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intellidgent Hydraulics and Automation, p. 27-42 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Learning experience of a simple theory through different learning styles

    Saarenrinne, P., 2012, EDULEARN12 Proceedings, 4th International Conference on Education and New Learning Technologies, 2-4 July, 2012, Barcelona, Spain. Gomez Chova, L., Candel Torres, I. & Lopez Martinez, A. (eds.). International Association of Technology, Education andDevelopment IATED, p. 7653-7656 (International Conference on Education and New Learning Technologies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Magnetomechanical Coupled FE Simulations of Rotating Electrical Machines

    Belahceen, A., Fonteyn, K., Kouhia, R., Rasilo, P. & Arkkio, A., 2012, 15th International IGTE Symposium on Numerical Field Calculations in Electrical Engineering, 16-19.2012, Graz, Austria. Institut für Grundlagen und Theorie der Elektrotechnik - IGTE, Technische Universität Graz, Austria, p. 1-6 6 p. (International IGTE Symposium on Numerical Field Calculations in Electrical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  46. Published

    Manufacturing sustainability: a comparison of Indian and Finnish manufacturers' vision and current state

    Shankar, K., Koho, M., Wan, H., Torvinen, S. & Chen, F. F., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Production Engineering, p. 491-498 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    MDM for assessing product variety and production concepts

    Pulkkinen, A., Kuusela, J., Huhtala, P. & Riitahuhta, A., 2012, Proceedings of the 9th International Symposium on Tools and Methods of Competitive Engineering, TMCE 2012, 7-11 May, 2012, Karlsruhe, Germany. Imre, H., Zoltan, R., Albert, A. & Mathias, B. (eds.). Delft, Netherlands: Delft University of Technology, p. 553-562 (International Symposium on Tools and Methods of Competitive Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Measuring and Modelling Hydraulic Fluid Dynamics at High Pressure - Accurate and Simple Approach

    Karjalainen, J-P., Karjalainen, R. & Huhtala, K., 2012, In : International Journal of Fluid Power. 13, 2, p. 51-59

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Micro and Desktop Factory Roadmap

    Tuokko, R., Heikkilä, R., Järvenpää, E., Nurmi, A., Prusi, T., Siltala, N. & Vuola, A., 2012, Tampere: Tampere University of Technology. Department of Production Engineering. 112 p.

    Research output: Book/ReportCommissioned reportProfessional

  50. Published

    Mittaustuloksia kaupallisilla puhtaustestikaapeilla

    Kuosku, M., Pekkonen, J. & Rinkinen, J., 2012, KompuNW -verkostoseminaari TTY:ssa 9.10.2012. Tampere: Tampere University of Technology, IHA - Department of Intelligent Hydraulics and Automation, p. 1-15 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  51. Published

    Modelling and Robust Control of Hydraulic Manipulators

    Zhai, L., 2012, Tampere: Tampere University of Technology. 98 p. (Tampere University of Technology. Publication; no. 1069)

    Research output: Book/ReportDoctoral thesisMonograph

Download list To download, please limit the number of search results to 1,000 or less.