Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. 2010
  2. Published

    GVT-Getriebe mit hydrostatischer Verstelleinheit

    Erkkilä, M. & Viitasalo, V., 2010, In : Mobile Maschinen. 1/2010, p. 32-33

    Research output: Contribution to journalArticleScientific

  3. Published

    Hydrauliikan komponenttipuhtausstandardien hyödyntäminen suomalaisessa konepajateollisuudessa

    Rinkinen, J., 2010, In : Fluid Finland. 1/2010, p. 18-23

    Research output: Contribution to journalArticleScientific

  4. Published

    Hydraulikomponenttien käyttöikä

    Rinkinen, J. & Immonen, A., 2010, In : Fluid Finland. 1/2010, p. 8-11

    Research output: Contribution to journalArticleScientific

  5. Published

    Impact of energy measurements in machining operations

    Lanz, M., Mani, M., Leong, S., Lyons, K., Ranta, A., Ikkala, K. & Bengtsson, N., 2010, Proceeding of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2010, August 15-18, 2010, Montreal, Quebec, Canada. p. 7 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Impedance control of redundant manipulators

    Muhammad, A. & Vilenius, M., 2010, Proceedings of the 6th FPNI - PhD Symposium West Lafayette 2010, June 15-19 2010, Indiana, USA. Ivantysynova, M. (ed.). p. 153-163

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Implementation of a direct procedure for critical point computations

    Mäkinen, J., Kouhia, R., Fedoroff, A. & Marjamäki, H., 2010, Proceedings of The Tenth International Conference on Computational Structures Technology, 14-17 September, 2010, Valencia, Spain. Topping, B. H. V., Adam, J. M., Pallares, F. J., Bru, R. & Romero, M. L. (eds.). p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Improvements to refiner performance with flow modeling and optimization

    Lindstedt, M., Huhtanen, J-P. & Karvinen, R., 2010, 7th International Seminar on Fundamental Mechanical Pulp Research (IFMPRS 2010), June 21-23, 2010, Nanjing, China. p. 202-210

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  9. Published

    Improving resolution of digital hydraulic valve system by utilizing fast switching valves

    Huova, M. & Plöckinger, A., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 79-92

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Information management challenges and enabling factors for utilizing virtual product builds

    Mela, J., Järvenpää, E., Velez, R., Lehtonen, T. & Riitahuhta, A., 2010, The 7th International Conference on Product Lifecycle Management, PLM 10, 12-14 July, 2010, BIBA University of Bremen, Germany. Bremen: BIBA-Bremen Institut Für Produktion und Logistik GmbH, p. 15 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  11. Published

    Intelligent Machines and Transport Systems, Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, Cern, Switzerland

    Karvinen, T. (ed.) & Keskinen, E. (ed.), 2010, Unknown Publisher.

    Research output: Book/ReportAnthologyScientificpeer-review

  12. Published

    Introduction to contact modelling - Part 1

    Lehtovaara, A., 2010, Striking Surfaces, International Seminar on Wear Control, Tampere University of Technology, Tampere Wear Center, 20.10.2010. p. 14 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  13. Published

    Inverse Methods for Continuous Balancing of Flexible Rolls

    Jokinen, K., 2010, Tampere: Tampere University of Technology. 107 p. (Tampereen teknillinen yliopisto. Julkaisu; vol. 944)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  14. Published

    Kehittyneet kelausteknologiat automatisoituna 3D-komposiittikappaleiden valmistusmenetelmänä - 3D FiWi

    Vuorinen, J. & Ellman, A., 2010, SISU 2010 - uusi tuotantoajattelu: loppuraportti. Tekesin ohjelmaraportti. p. 94-98

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  15. Published

    Kehitystä putkistopassin koulutusmateriaaliin

    Rinkinen, J. & Virta, S., 2010, In : Fluid Finland. 1/2010, p. 28-30

    Research output: Contribution to journalArticleScientific

  16. Published

    Koneenosien suunnittelu

    Airila, M., Ekman, K., Hautala, P., Kivioja, S., Kleimola, M., Martikka, H., Miettinen, J., Niemi, E., Ranta, A., Rinkinen, J., Salonen, P., Verho, A., Vilenius, M. & Välimaa, V., 2010, Unknown Publisher. 796 p.

    Research output: Book/ReportBookProfessional

  17. Published

    Koulutuksesta ja tutkimuksesta

    Huhtala, K., 2010, In : Fluid Finland. 9, 3-4, p. 6-6

    Research output: Contribution to journalArticleScientific

  18. Published

    Laitteisto, ohjauspiiri ja menetelmä paineen ja tilavuusvirran tuottamiseksi

    Linjama, M., Tammisto, J., Huhtala, K. & Vilenius, M., 2010, Patent No. Pat. FI 121090 B, Priority date 30 Jun 2010, Priority No. (21) FI 20085242

    Research output: PatentScientific

  19. Published

    Laser produced grinding burns for Barkhausen noise measurement result validation

    Santa-Aho, S., Sorsa, A., Vippola, M., Latokartano, J., Lindgren, M. & Lepistö, T., 2010, The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies CM2010 / MFPT 2010, 22-24 June 2010, Ettington Chase, Stratford-upon-Avon, England. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  20. Published

    Logical and semantical foundations for knowledge representation for assembly and manufacturing processes

    Lanz, M. & Tuokko, R., 2010, Proceeding of Post-Graduate Workshop on Intelligent Machines and Transport Systems, 3-7 May 2010, CERN, Switzerland. p. 98-109 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  21. Published

    M1-teknologialla voidaan rakentaa virtuaalisia oppimisympäristöjä ja konelaboratorioita

    Koskinen, K. T., Leino, T., Palonen, T. & Ranta, P., 2010, In : Fluid Finland. 2/2010, p. 18-20

    Research output: Contribution to journalArticleScientific

  22. Published

    Managing high variety products in global value systems

    Pulkkinen, A., Riitahuhta, A., Leino, S-P., Lappeteläinen, I., Heikkilä, M. & Kohtamäki, M., 2010, The 7th International Conference on Product Lifecycle Management, PLM 10, 12-14 July, 2010, BIBA University of Bremen, Germany. Bremen: BIBA-Bremen Institut Für Produktion und Logistik GmbH, p. 13 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  23. Published

    Matkaraportti: Digitaalihydrauliikan seminaari marraskuisessa Linzissä

    Linjama, M., 2010, In : Fluid Finland. 1/2010, p. 12-14

    Research output: Contribution to journalArticleScientific

  24. Published

    Matrix-based conflict resolution algorithm: applicaton to path selection in PN-based scheduling search

    Popescu, C. & Martinez Lastra, J. L., 2010, 15th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2010, September 13-16, 2010, Bilbao, Spain. p. 4 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Measured characteristics of an in-line pump with independently controlled pistons

    Tammisto, J., Huova, M., Heikkilä, M., Linjama, M. & Huhtala, K., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Microfactory concept for highly flexible volume assembly of watch mechanisms

    Järvenpää, E., Heikkilä, R. & Tuokko, R., 2010, Proceedings of the 7th International Workshop on Microfactories, IWMF 2010, 24-27 October, 2010, Daejeon, Korea. p. 9-14

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  27. Published

    Micro H-scara robot: findings and results

    Vuola, A., Siltala, N., Heikkilä, R. & Tuokko, R., 2010, Proceedings of the 7th International Workshop on Microfactories, IWMF 2010, 24-27 October, 2010, Daejeon, Korea. p. 20-24

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  28. Published

    Microstructure and wear resistance of the laser hardened PM tool steel vanadis 6

    Surzhenkov, A., Kulu, P., Viljus, M., Vallikivi, A. & Latokartano, J., 2010, Proceedings of the 7th International Conference of DAAAM Baltic Industrial Engineering, 22-24 April, 2010, Tallinn, Estonia. Kyttner, R. (ed.). Tallinn University of Technology, p. 486-491

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  29. Published

    Miniaturization of flexible screwing cell

    Vuola, A., Heikkilä, R., Prusi, T., Remes, M., Rokka, P., Siltala, N. & Tuokko, R., 2010, Proceedings of 5th IFIP WG 5.5, International Precision Assembly Seminar, IPAS 2010, 14-17 February, 2010, Chamonix, France. Ratchev, S. (ed.). p. 309-316

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Miniaturized camera systems for microfactories

    Prusi, T., Rokka, P. & Tuokko, R., 2010, Proceedings of 5th IFIP WG 5.5, International Precision Assembly Seminar, IPAS 2010, 14-17 February, 2010, Chamonix, France. Ratchev, S. (ed.). p. 115-122

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Modeling and identification of a pneumatic muscle actuator system controlled by on/off solenoid valve

    Jouppila, V., Gadsden, A. & Ellman, A., 2010, Proceedings of the 7th International Fluid Power Conference IFK, Aachen, Germany, 22 - 24 March, 2010. p. 1-34 34 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  32. Published

    Modeling coupled hydraulic-driven multibody systems using finite element method

    Mäkinen, J. M. A., Pertola, P. S. & Marjamäki, H. U., 2010, The 1st Joint International Conference on Multibody System Dynamics, May 25-27, 2010, Lappeenranta, Finland. p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Modeling of closed spare part circulation for better availability of aircraft

    Laitinen, J. & Hagmark, P-E., 2010, Proceedings of the 4th Asia-Pacific International Symposium on Advanced Reliability and Maintenance Modeling APARM 2010, Wellington, New Zealand, 2 - 4 December, 2010. Chukova, S., Haywood, J. & Dohi, T. (eds.). p. 409-416

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  34. Published

    Modelling and robust control of a hydraulic servo system

    Zhai, L., Mattila, J. & Virvalo, T., 2010, Proceedings of the Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, CERN, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 156-167

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Modelling of fretting fatigue cracking risk in shrink fit with wavy surfaces

    Immonen, J., Lehtovaara, A. & Lönnqvist, C., 2010, 14th Nordic Symposium on Tribology, Nordtrib 2010, Storforsen, Sweden, Luleå University of Technology. p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Multi-agent control of reconfigurable pallet transport systems

    Jokinen, J., 2010, Tampere: Tampere University of Technology. (Tampereen teknillinen yliopisto. Julkaisu; vol. 869)

    Research output: Book/ReportDoctoral thesisMonograph

  37. Published

    Multicriterion approach to minimum compliance topology optimization of trusses with comparison to stress-constrained minimum weight design

    Mela, K. & Koski, J., 2010, Advances and Trends in Structural Engineering, Mechanics and Computation. Zingoni, A. (ed.). p. 1081-1084

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  38. Published

    Multiple marine vehicle deconflicted path planning with currents and communication constraints

    Häusler, A., Ghabcheloo, R., Pascoal, M. A. & Aguiar, A. P., 2010, The 7th IFAC Symposium on Intelligent Autonomous Vehicles IAV'10, Lecce, Italy, September 2010. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Negative load sensing

    Erkkilä, M., Jalkanen, T., Lehto, E. & Virvalo, T., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Neutral interface for assembly and manufacturing related knowledge exchange in heterogeneous design environment

    Lanz, M., Rodriguez, R., Luostarinen, P. & Tuokko, R., 2010, Precision assembly technologies and systems, proceedings of 5th International Precision Assembly Seminar, IPAS 2010, 14-17 February 2010, Chamonix, France. Ratchev, S. (ed.). Springer, p. 21-29

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Newcomer eSONIA

    Popescu, C. & Thorburn, K., 2010, In : ARTEMIS Magazine. 8, p. 16-17

    Research output: Contribution to journalArticleProfessional

  42. Published

    New digital electrohydraulic valve package

    Uusitalo, J-P., Ahola, V., Söderlund, L. & Kettunen, L., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14, 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 39-59

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Non-linear finite element modelling of a test system for a maintenance robot

    Marjamäki, H., Mäkinen, J. & Pertola, P., 2010, Proceedings of The Tenth International Conference on Computational Structures Technology, 14-17 September, 2010, Valencia, Spain. Topping, B. H. V., Adam, J. M., Pallares, F. J., Bru, R. & Romero, M. L. (eds.). p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Novel approach on application manufacturing using inkjet printing, laser ablation and new polymer substrate

    Kunnari, E., Karttunen, M., Kumpulainen, T., Kortet, S., Laine-Ma, T., Mäntysalo, M., Smalen, M. & Ruuskanen, P., 2010, ICEP2010. International Conference on Electronics Packaging, May 12-14, 2010, Hokkaido, Japan. p. 249-254

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  45. Published

    Novel bistable hammer valve for digital hydraulics

    Uusitalo, J-P., Ahola, V., Söderlund, L., Linjama, M., Juhola, M. & Kettunen, L., 2010, In : International Journal of Fluid Power. 11, 3, p. 35-44

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Numerical modelling of bit-rock interaction in percussive drilling

    Saksala, T., 2010, ECCM 2010, IV European Conference on Computational Mechanics, May 16-21, 2010, Paris, France. p. 1-2 2 p. 2078

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  47. Published

    Numerical modelling of bit-rock interaction in percussive drilling by manifold approach

    Saksala, T. J. & Mäkinen, J. M., 2010, Proceedings of NSCM-23: the 23rd Nordic Seminar on Computational Mechanics NSCM-23, 21-22 October 2010, Stockholm, Sweden. Eriksson, A. & Tibert, G. (eds.). p. 247-250

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Numerical modelling of rock fracture in percussive drilling

    Saksala, T., 2010, Tampere: Tampere University of Technology. 103 p. (Tampereen teknillinen yliopisto. Julkaisu; vol. 886)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  49. Published

    ON3 - Biohybrid nanocomposite coatings from sonicated chitosan and nanoclay

    Vartiainen, J., Tuominen, M. & Nättinen, K., 2010, 4th Shelf Life International Meeting (SLIM), June 23-25, 2010, Zaragoza, Spain. p. 24-24

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  50. Published

    On computing critical equilibrium points by direct method

    Mäkinen, J., Kouhia, R. & Ylinen, A., 2010, Proceedings of NSCM-23: the 23td Nordic Seminar on Computational Mechanics, NSCM-23, 21-22 October 2010, Stockholm, Sweden. Eriksson, A. & Tibert, G. (eds.). p. 271-274

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    On the flocculation in fiber suspensions

    Putkiranta, M., Marjanen, K., Eloranta, H., Pärssinen, T. & Saarenrinne, P., 2010, 7th International Conference on Multiphase Flow ICMF-2010, May 30 - June 4, 2010 Tampa, Florida. p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Download list To download, please limit the number of search results to 1,000 or less.