Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. 2015
  2. Published

    Gain Scheduling Full State Feedback with D-Implementation for Velocity Tracking of Hydrostatic Drive Transmission

    Backas, J., Ghabcheloo, R. & Huhtala, K., 2015, Proceedings of the Fourteenth Scandinavian International Conference on Fluid Power, SICFP15. May 20-22, 2015. Tampere, Finland. Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 64-75 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Guidelines for Designing Human-friendly User Interfaces for Factory Floor Manufacturing Operators

    Järvenpää, E. & Lanz, M., 2015, Advances in Production Management Systems: Innovative Production Management Towards Sustainable Growth: IFIP WG 5.7 International Conference, APMS 2015, Tokyo, Japan, September 7-9, 2015, Proceedings, Part II. Springer International Publishing, p. 531-538 8 p. (IFIP Advances in Information and Communication Technology).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Hydraulic Cylinder Models for Flexible Multibody System Simulation

    Ylinen, A., 2015, Tampere: Tampere University of Technology. 136 p. (Tampere University of Technology. Publication; vol. 1302)

    Research output: Book/ReportDoctoral thesisMonograph

  5. Published

    Image-Based Stress and Strain Measurement of Wood in the Split-Hopkinson Pressure Bar

    Moilanen, C. S., Saarenrinne, P., Engberg, B. A. & Björkqvist, T., 2015, In : Measurement Science and Technology. 26, 8, 085206.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    Improving Recovery Boiler Availability through Understanding Fume Behavior

    Leppänen, A. & Välimäki, E., 2015, TAPPI PEERS Conference Proceedings, October 25-28, 2015. Atlanta, Georgia: TAPPI, 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  7. Published

    Increasing Employee Involvement in Socially Sustainable Manufacturing: Two Methods for Capturing Employees’ Tacit Knowledge to Improve Manufacturing Processes

    Kopra, M-J., Halonen, N., Järvenpää, E. & Lanz, M., 2015, Advances in Production Management Systems: Innovative Production Management Towards Sustainable Growth: IFIP WG 5.7 International Conference, APMS 2015, Tokyo, Japan, September 7-9, 2015, Proceedings, Part II. Springer International Publishing, p. 539-546 8 p. (IFIP Advances in Information and Communication Technology).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Keskipakopumppujen mitoituksen ja käytön haasteet

    Lehtonen, E. & Rinkinen, J., 2015, In : Promaint. 29, 4, p. 37-39 3 p.

    Research output: Contribution to journalArticleProfessional

  9. Published

    Method for Modelling Strategic Capabilities in Small and Medium Sized Enterprises

    Halme, J., Majuri, M., Nylund, H., Kopra, M-J. & Tuokko, R., 2015, Proceedings of the 25th international conference on flexible automation and intelligent manufacturing : FAIM2015, 23rd-26th June, 2015 Wolverhampton, UK. Vol. Vol. 2. p. 132-139 8 p. 130

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Micro-factories

    Järvenpää, E., Heikkilä, R., Siltala, N., Prusi, T. & Tuokko, R., 2015, Micromanufacturing Engineering and Technology. 2 ed. Elsevier, p. 549-579

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  11. Published

    Numerical modelling of rock fracture with the embedded discontinuity approach incorporating heterogeneity

    Saksala, T., 2015, ISRM Congress 2015 Proceedings: Innovations in Applied and Theoretical Rock Mechanics. International Society for Rock Mechanics ISRM, 11 p. 177

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    On the effect of damping on stability of non-conservative systems

    Jeronen, J. & Kouhia, R., 2015, Proceedings of the XII Finnish Mechanics Days: Suomen XII mekaniikkapäivien esitelmät. Kouhia, R., Mäkinen, J., Pajunen, S. & Saksala, T. (eds.). Rakenteiden Mekaniikan Seura ry, p. 77 82 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  13. Published

    Production planning and control in Finnish manufacturing companies – Current state and challenges

    Järvenpää, E., Lanz, M., Tokola, H., Salonen, T. & Koho, M., 2015, Proceedings of the 25th International Conference on Flexible Automation and Intelligent Manufacturing. 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Rate dependent embedded discontinuity approach incorporating heterogeneity for numerical modelling of rock fracture

    Saksala, T., 2015, In : Rock Mechanics and Rock Engineering. 48, 4, p. 1605-1622 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Roll-to-roll coating by liquid flame spray nanoparticle deposition

    Mäkelä, J. M., Haapanen, J., Aromaa, M., Teisala, H., Tuominen, M., Stepien, M., Saarinen, J. J., Toivakka, M. & Kuusipalo, J., 2015, Materials Research Society Symposium Proceedings. MATERIALS RESEARCH SOCIETY, Vol. 1747. p. 37-42 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Simulation of ash-forming compounds in the kraft recovery boiler

    Leppänen, A., Välimäki, E. & Oksanen, A., 2015, 10th European Conference on Industrial Furnaces and Boilers. Porto, Portugal, 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Some aspects on efficient solution of creep problems

    Kouhia, R., Marjamäki, P. & Kivilahti, J., 2015, In : Rakenteiden mekaniikka. 48, 4, p. 199-210 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Soodakattilan käyttövarmuuden parantaminen tuhkayhdisteiden käyttäytymistä mallintamalla

    Leppänen, A. & Haaga, K., 2015, In : Promaint. 3/2015, p. 25-27 3 p.

    Research output: Contribution to journalArticleProfessional

  19. Published

    Sustainability Performance Measurement and Management Model

    Koho, M., Tapaninaho, M., Järvenpää, E., Heilala, J. & Lanz, M., 2015, . Proceedings of the 25th International Conference on Flexible Automation and Intelligent Manufacturing. 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Systematic Search and Ranking of Physical Contradictions Using Graph Theory Principles: Toward a Systematic Analysis of Design Strategies and their Impacts: TRIZ and Knowledge-Based Innovation in Science and Industry

    Coatanéa, E., Ryynänen, L., Calonius, O., Mokammel, F. & Riitahuhta, A., 2015, In : Procedia Engineering. 131, p. 1165-1182 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    Teollinen internet täydentää pk-yritysten palveluita

    Väliaho, V., Martinsuo, M., Koskinen, K. & Aaltonen, J., 2015, In : Promaint. 29, 5, p. 36-38 3 p.

    Research output: Contribution to journalArticleProfessional

  22. Published

    The Fourteenth Scandinavian International Conference on Fluid Power, SICFP15: Proceedings

    Laamanen, A. (ed.) & Huhtala, K. (ed.), 2015, Tampere University of Technology. Department of Intelligent Hydraulics and Automation. 835 p. (Scandinavian International Conference on Fluid Power (SICFP))

    Research output: Book/ReportAnthologyScientificpeer-review

  23. Published

    Two models for hydraulic cylinder

    Ylinen, A., Kouhia, R. & Mäkinen, J., 2015, 2nd International Conference on Multi-Scale Computational Methods for Solids and Fluids: ECCOMAS MSF 2015. Ibrahimbegović, A., Ademović, N., Ilić-Georgijević, E., Serdarević, A., Hrasnica, M. & Dolarević, S. (eds.). Sarajevo, p. 115-116 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  24. Published

    Unexpectedly low angular extent of journal bearing pressures: experiment and theory

    Sharma, N., Vimal, T. & Chatterjee, A., 2015, In : Zeitschrift fur Angewandte Mathematik und Physik. 66, 2, p. 455-471 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Unsteady turbulent boundary layers in swimming rainbow trout

    Yanase, K. & Saarenrinne, P., 2015, In : Journal of Experimental Biology. 218, 9, p. 1373-1385

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Using maintenance data for extended warranty simulation

    Mahlamäki, K., Jokinen, J., Borgman, J., Niemi, A. & Rämänen, J., 2015, COMADEM 2014, Implications of life cycle analysis in asset and maintenance management, 16-18 September 2014, Brisbane Convention and Exhibition Centre, Australia. 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  27. Published

    Vision-based trajectories planning for four wheels independently steered mobile robots with maximum allowable velocities

    Ziaei, Z., Oftadeh, R. & Mattila, J., 2015, Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). Springer Verlag, Vol. 9287. p. 303-309 7 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 9287).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Wood compression model for radial compression of earlywood and latewood

    Moilanen, C., Björkqvist, T. & Saarenrinne, P., 2015, Proceedings of the XII Finnish Mechanics Days. Rakenteiden Mekaniikan Seura ry, p. 261-266 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  29. 2014
  30. Published

    Method and apparatus for cooling material by atomised spray

    Ahonen, S., Karvinen, R. & Vainio, T., 31 Dec 2014, IPC No. C03B 27/ 02 A I, Patent No. CN102803520, Priority date 15 Jun 2010, Priority No. WO2010FI50499

    Research output: PatentScientific

  31. Published

    Versatile erosion wear testing with the high speed slurry-pot

    Ojala, N., Heino, V., Valtonen, K. & Kuokkala, V-T., Nov 2014.

    Research output: Other conference contributionPaper, poster or abstractScientific

  32. Published

    Competence needs and a model for the teaching strategy development of mechanical designers in product development

    Nevaranta, J., 31 Oct 2014, Tampere: Tampere University of Technology. 141 p. (Tampere University of Technology, Publication; vol. 1245)

    Research output: Book/ReportDoctoral thesisMonograph

  33. Published

    From plain visualisation to vibration sensing: using a camera to control the flexibilities in the ITER remote handling equipment

    Dubus, G. D., 10 Oct 2014, Tampere: Tampere University of Technology. 193 p. (Tampere University of Techology. Publication; vol. 1250)

    Research output: Book/ReportDoctoral thesisMonograph

  34. Published

    Fully variable valve actuation in large bore diesel engines

    Herranen, M., 3 Oct 2014, Tampere: Tampere University of Technology. 115 p. (Tampere University of Techology. Publication; vol. 1239)

    Research output: Book/ReportDoctoral thesisMonograph

  35. Published

    A Semantically Enhanced Approach for Orchestration of Web Services in Factory Automation Systems

    Puttonen, J., 15 Aug 2014, Tampere: Tampere University of Technology. 157 p. (Tampere University of Technology. Publication; no. 1224)

    Research output: Book/ReportDoctoral thesisMonograph

  36. Published

    Numerical modeling of fine particle and deposit formation in a recovery boiler

    Leppänen, A., Tran, H., Taipale, R., Välimäki, E. & Oksanen, A., 1 Aug 2014, In : Fuel. 129, p. 45-53 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    MEMS-based motion state estimation and control of hydraulic manipulators

    Honkakorpi, J., 27 Jun 2014, Tampere: Tampere University of Technology. 91 p. (Tampere University of Techology. Publication; vol. 1219)

    Research output: Book/ReportDoctoral thesisMonograph

  38. Published

    Modeling and control of a pneumatic muscle actuator

    Jouppila, V., 4 Apr 2014, Tampere: Tampere University of Technology. 95 p. (Tampere University of Technology. Publication; vol. 1199)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  39. Published

    Retrofitting digital hydraulics – An analytical study

    Ketonen, M., Linjama, M. & Huhtala, K., 24 Mar 2014, Conference proceedings, 9th International Fluid Power Conference Aachen: Modern Fluid Power - Challenges, Responsibilities, Markets, Vol. 1. Aachen Germany, p. 163 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    A case study of share of ICT infrastructure in energy consumption of discrete manufacturing facility

    Sohail, M., Florea, A. & Martinez Lastra, J. L., 2014, 2014 IEEE 15th Workshop on Control and Modeling for Power Electronics (COMPEL), 22-25 Junen 2014, University of Cantabria, Santander, Spain. Piscataway: The Institute of Electrical and Electronics Engineers IEEE, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    A Continuum damage model based on Ottosen's four parameter failure criterion for concrete

    Tahaei Yaghoubi, S., Kouhia, R., Hartikainen, J. & Kolari, K., 2014, In : Rakenteiden mekaniikka. 47, 2, p. 50-66 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    A Continuum damage model for quasi-brittle materials

    Yaghoubi, S. T., Kouhia, R., Hartikainen, J. & Kolari, K., 2014, Proceedings of NSCM-27: the 27th Mechanics Nordic Seminar on Computational Mechanics. Eriksson, A., Kulachenko, A., Mihaescu, M. & Tibert, G. (eds.). Stockholm: KTH Mechanics, p. 160-163 4 p. (TRITA-MEK Technical report; no. 24).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Activity report of COST Action TU0905 Working Group 2 – Material characterization and material improvement

    Schneider, J., Karvinen, R., Vandebroek, M. & Savineau, G., 2014, Proceedings volume of the Challenging Glass 4 & COST Action TU0905 Final Conference, 6-7 February 2014 at the EPFL in Lausanne, Switzerland. Louter, C., Bos, F., Belis, J. & Lebet, J-P. (eds.). CRC Press, p. 21-24 4 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  44. Published

    A hydraulic cylinder model for multibody simulations

    Ylinen, A., Marjamäki, H. & Mäkinen, J., 2014, In : Computers & Structures. 138, p. 62-72 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Published

    A Macro-Micro Controller for Pallet Picking by an Articulated-frame-steering Hydraulic Mobile Machine

    M. Aref, M., Ghabcheloo, R. & Mattila, J., 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA), May 31 - June 7, 2014, Hong Kong, China. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 6816-6822 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    A model for scheduling of employees using supplier selection

    Holopainen, S., 2014, Engineering optimization IV, Proceedings of the International Conference on Engineering Optimiztion (ENGOPT 2014), Lisbon, Portugal, 8-11 September 2014. Rodrigues, H. C., Herskovits, J., Mota Soares, C. M., Guedes, J. M., Araújo, A. L., Folgado, J. O., Moleiro, F. & Madeira, J. F. A. (eds.). The Netherlands: CRC Press/Balkema, p. 533-538 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  47. Published

    Analysis of Real-Time Properties of a Digital Hydraulic Power Management System

    Boström, P., Alexeev, P., Heikkilä, M., Huova, M., Waldén, M. & Linjama, M., 2014, 19th International Conference, FMICS 2014, Florence, Italy, September 11-12, 2014.. Springer International Publishing, p. 33-47 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Analysis of signals and power flow in a digital hydraulic multi actuator application

    Karvonen, M., Heikkilä, M., Linjama, M. & Huhtala, K., 2014, 8th FPNI Ph.D Symposium on Fluid Power, FPNI2014, June 11-13, 2014, Lappeenranta, Finland. The American Society of Mechanical Engineers ASME, p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Anisotropic viscodamage-viscoplastic consistency constitutive model with a parabolic cap for rocks with brittle and ductile behavior

    Saksala, T. & Ibrahimbegovic, A., 2014, In : International Journal of Rock Mechanics and Mining Sciences. 70, p. 460-473 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    A packet scheduler for real-time 6LoWPAN wireless networks in manufacturing systems

    Santillan Martinez, G., Delamer, I. M. & Martinez Lastra, J. L., 2014, In : Journal of Intelligent Manufacturing. 10845, 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  51. Published

    Application of Design Review to Probabilistic Risk Assessment in a Large Investment Project

    Virtanen, S., Penttinen, J-P., Kiiski, M. & Jokinen, J., 2014, Proceedings of the Probabilistic Safety Assessment and Management PSAM12, June 2014, Honolulu, Hawaii. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  52. Published

    A Semi-Fidelity Training Simulator: Promising Opportunities for Student-Centered Learning

    Kaapu, T., Tiainen, T. & Ellman, A., 2014, Proceedings of the 22nd European Conference on Information Systems, ECIS 2014, June 9-11, 2014,Tel Aviv. 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1...4 5 6 7 8 9 10 11 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.