Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. 2014
  2. Published

    Delay excited vibrations in grinding wheel rotor system

    Järvenpää, V-M. & Yuan, L., 2014, Proceedings of the 21st International Congress on Sound and Vibration, In Depth Sound and Vibration Research 2014, ICSV21, 13-17 July, 2014, Beijing, China. Crocker, M. J., Pawelczyk, M. & Tian, J. (eds.). International Institute of Acoustics and Vibration (IIAV), p. 2437-2444 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Deriving Efficient and Dependable Parallel Programs from Simulink Models

    Ostroumov, S., Boström, P., Waldén, M. & Huova, M., 2014, Turku: TURKU CENTRE FOR COMPUTER SCIENCE. 38 p. (TUCS Technical Report; no. 1111)

    Research output: Book/ReportCommissioned reportProfessional

  4. Published

    Design driven world of cellulose-from bulk to luxury?

    Qvintus, P., Kataja, K., Heikkilä, P., Salmela, J., Lehmonen, J., Ketoja, J., Hänninen, T., Harlin, A., Härkäsalmi, T., Vuorinen, J. & Vuorinen, T., 2014, Fibre Value Chain Conference and Expo 2014: Pulp and Paper Bioenergy Bioproducts. Appita Inc., p. 67-74 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Design reasoning patterns in NPD education design

    Juuti, T., Lehtonen, T., Rättyä, K., Halonen, N., Vanhatalo, M. & Kujansuu, P., 2014, Proceedings of 16th International Conference on Engineering and Product Design Education, University of Twente, Enschede, The Netherlands 4th-5th September 2014. Bohemia, E., Eger, A., Eggink, W., Kovacevic, A., Parkinson, B. & Wits, W. (eds.). The Design Society, p. 682-687 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Design synthesis: integrated product and manufacturing system design

    Britton, G. & Torvinen, S., 2014, CRC Press. 358 p.

    Research output: Book/ReportBookScientificpeer-review

  7. Published

    Developed measuring methods for hydraulic fluid dynamics and viscosity at extreme pressures and temperatures

    Karjalainen, J-P., Karjalainen, R. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Digital Hydraulics Applied Research - Marine Hydraulics

    Mäkinen, E., Kukkonen, S. & Perukangas, M., 2014, Tampere: FIMECC Oy. 3 p. (FIMECC Publications Series; no. 2)

    Research output: Book/ReportCommissioned reportProfessional

  9. Published

    Digital Hydraulic System

    Sipola, A., Vihtanen, H-P., Linjama, M. & Laamanen, A., 2014, Patent No. Australian Patent Office, AU 2009300985 B2, Priority date 8 May 2014, Priority No. (31) 20085958 : (21) 2009300985

    Research output: PatentScientific

  10. Published

    Digital Microhydraulics

    Laamanen, A. & Linjama, M., 2014, Tampere: FIMECC Oy. 4 p. (FIMECC Publications Series; no. 2)

    Research output: Book/ReportCommissioned reportProfessional

  11. Published

    Dynamics of ice milling and breaking during arctic ship steering operations

    Keskinen, E., Montonen, J., Sharma, N. & Cotsaftis, M., 2014, Proceedings of the ASME 2014, 12th Biennial Conference on Engineering Systems Design and Analysis, ESDA2014, June 25-27, 2014, Copenhagen, Denmark. The American Society of Mechanical Engineers ASME, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Easurement of solids velocity and concentration in a large cold CFB model

    Peltola, J., Karvonen, L., Elfvengren, J., Kolehmainen, J., Kallio, S., Pallares, D. & Johnsson, F., 2014, CFB-11: Proceedings of the 11th International Conference on Fluidized Bed Technology, Beijing, China, 14-17 May 2014. p. 589-594

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Editorial of special issue Telerobotics and systems engineering for scientific facilities

    Ferre, M. (ed.), Mattila, J. (ed.), Siciliano, B. (ed.) & Bonnal, P. (ed.), 2014, InTech Open Access Publisher. 1 p. (International journal of advanced robotic systems; vol. 11)

    Research output: Book/ReportAnthologyScientificpeer-review

  14. Published

    Effect of Temperature on Fume Formation and Deposition in Kraft Recovery Boilers - a Modeling Approach

    Leppänen, A., Tran, H., Välimäki, E. & Oksanen, A., 2014, 2014 International Chemical Recovery Conference, Proceedings - Volume 2. Nieminen, M. & Lampinen, P. (eds.). Suomen Soodakattilayhdistys, The Finnish Recovery Boiler Committee; TAPPI, p. 38-47 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Electro hydraulic gas exchange valve actuation of 4-stroke large bore diesel engine

    Herranen, M. & Huhtala, K., 2014, 8th FPNI Ph.D Symposium on Fluid Power, FPNI2014, June 11-13, 2014, Lappeenranta, Finland. The American Society of Mechanical Engineers ASME, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Energy efficient outdoor lighting: an implementation

    Farahat, A., Florea, A., Martinez Lastra, J. L., Branas Reyes, C. & Azcondo, F. J., 2014, 2014 IEEE 15th Workshop on Control and Modeling for Power Electronics (COMPEL), 22-25 June 2014, University of Cantabria, Santander, Spain. Piscataway: The Institute of Electrical and Electronics Engineers, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Equal coded digital hydraulic valve system - improving tracking control with pulse frequency modulation

    Paloniitty, M., Linjama, M. & Huhtala, K., 2014, The Second International Conference on Dynamics and Vibroacoustics of Machines, September 15-17, 2014, Samara, Russia. p. 618-626 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Experimental Comparisons of Sliding Mode Controlled Pneumatic Muscle and Cylinder Actuators

    Jouppila, V., Gadsden, A. S. & Ellman, A., 2014, In : Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME. 136, 4, 10 p., 044503.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Fatigue behavior of laser clad round steel bars

    Tuominen, J., Näkki, J., Poutala, J., Miettinen, J., Peltola, T., Vuoristo, P., Rasehorn, I., Alam, M. M. & Kaplan, A. F. H., 2014, In : Journal of Laser Applications. p. 1-10 10 p., 012006.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Fuel optimal controller for hydrostatic drives: A simulation study and model validation

    Backas, J., Ghabcheloo, R., Hyvönen, M. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Functional failure modes cause-consequence logic suited for mobile robots used at scientific facilities

    Douzi, I. K., Virtanen, S., Bonnal, P. & Verma, A. K., 2014, In : Reliability Engineering and System Safety. 129, p. 10-18 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Geometry-Aided Inversion of Manipulator Telescopic Link Length from MEMS Accelerometer and Rate Gyro Readings

    Vihonen, J., Honkakorpi, J., Mattila, J. & Visa, A., 2014, 2014 IEEE International Conference on Robotics & Automation (ICRA) Hong Kong Convention and Exhibition Center, May 31 - June 7, 2014. Hong Kong, China. Institute of Electrical and Electronics Engineers IEEE, p. 181-186 6 p. (IEEE International Conference on Robotics & Automation (ICRA)).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Geometry-Aided Low-Noise Angular Velocity Sensing of Rigid-Body Manipulator Using MEMS Rate Gyros and Linear Accelerometers

    Vihonen, J., Honkakorpi, J., Koivumäki, J., Mattila, J. & Visa, A., 2014, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Besancon, France, July 8-11, 2014. Piscataway, NJ: IEEE, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Global Path Planning with Obstacle Avoidance for Omnidirectional Mobile Robot Using Overhead Camera

    Ziaei, Z., Oftadeh, R. & Mattila, J., 2014, 2014 IEEE International Conference on Mechatronics and Automation, ICMA 2014, Tianjin, China, August 3-6, 2014. Piscataway, NJ: IEEE, p. 697-704 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Hermetic room temperature glass welding technology

    Lundén, H., Kumpulainen, T., Määttänen, A. & Vihinen, J., 2014, 2014 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2014 June 15-18, 2014, Washington, DC, USA. Nano Science and Technology Institute, p. 13-16 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    High Performance Particle Tracking Velocimetry for Fluidized Beds

    Elfvengren, J., Kolehmainen, J. & Saarenrinne, P., 2014, VISAPP 2014, Proceedings of the 9th International Conference on Computer Vision Theory and Applications , Volume 3, Lisbon, Portugal, 5-8 January, 2014. Battiato, S. & Braz, J. (eds.). SCITEPRESS, p. 441-449 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Hopf bifurcation of nonlinear contact force in grinding system

    Yuan, L., Järvenpää, V-M. & Virtanen, S., 2014, Proceedings of the 21st International Congress on Sound and Vibration, In Depth Sound and Vibration Research, 2014, ICSV21, 13-17 July, 2014, Beijing, China. Crocker, M. J., Pawelczyk, M. & Tian, J. (eds.). International Institute of Acoustics and Vibration (IIAV), p. 2445-2452 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Hydraulic Manipulator Virtual Decomposition Control with Performance Analysis Using Low-Cost MEMS Sensors

    Koivumäki, J., Honkakorpi, J., Vihonen, J. & Mattila, J., 2014, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Besancon, France, July 8-11, 2014. Piscataway, NJ: IEEE, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Hydraulijärjestelmien suunnitteluperusteet

    Huhtala, K. & Rinkinen, J., 2014, Koneenosien suunnittelu. Björk, T., Hautala, P., Huhtala, K., Kivioja, S., Kleimola, M., Lavi, M., Martikka, H., Miettinen, J., Ranta, A., Rinkinen, J. & Salonen, P. (eds.). Helsinki: Sanoma Pro Oy, p. 436-463 28 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  30. Published

    Hydraulikomponenttien puhtausvalvontastandardien tilanne 2014

    Rinkinen, J., 2014, PAMAS 2014 Käyttäjäpäivä, 4.2.2014, Tampereen teknillinen yliopisto, Tampere. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). Tampere: Tampereen teknillinen yliopisto, p. 157-182 26 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  31. Published

    Hydraulikomponenttien testipenkkistandardi ja mittaustuloksia

    Pekkonen, J., Elo, L., Kuosku, M. & Rinkinen, J., 2014, PAMAS 2014 Käyttäjäpäivä, 4.2.2014, Tampereen teknillinen yliopisto, Tampere. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). Tampere: Tampereen teknillinen yliopisto, p. 199-210 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  32. Published

    Image Based Local Strain Measurement of Wood

    Moilanen, C. S., Saarenrinne, P., Engberg, B. A. & Björkqvist, T., 2014, Advancement of Optical Methods in Experimental Mechanics Volume 3, Conference Proceedings of the Society for Experimental Mechanics Series. Jin, H., Sciammarella, C., Yoshida, S. & Lamberti, L. (eds.). Berlin: Springer, p. 339-345 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Image based measurement techniques for partuculate flows

    Kolehmainen, J., 2014, Tampere: Tampere University of Technology. 98 p. (Tampere University of Technology, Publication; vol. 1258)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  34. Published

    Image Stitching Based Measurements of Medical Screws

    Cenev, Z., Prusi, T. & Tuokko, R., 2014, Precision Assembly Technologies and Systems. 7th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2014, Chamonix, France, February 16-18, 2014, Revised Selected Papers. Ratchev, S. (ed.). Springer Berlin Heidelberg, p. 69-78 10 p. (IFIP Advances in Information and Communication Technology; vol. 435).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Impacts of making design decision sequence explicit on NPD project in forest machinery company

    Halonen, N., Lehtonen, T. & Juuti, T., 2014, Proceedings of 10th NordDesign 2014 Conference, Espoo, August 27-29, Aalto University. Laakso, M. & Ekman, K. (eds.). Espoo: Aalto Desingn Factory, p. 702-711 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Implementing circulating oil lubrication systems based on the IMC-AESOP architecture

    Camp, R. & Lobov, A., 2014, Industrial cloud-based cyber-physical systems. The IMC-AESOP approach. Colombo, A. W., Bangemann, T., Karnouskos, S., Delsing, J., Stluka, P., Harrison, R., Jammes, F. & Martinez Lastra, J. L. (eds.). Springer, p. 183-202 20 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  37. Published

    Implementing KPIs for energy performance assessment in brownfield districts

    Florea, A., Martinez Lastra, J. L., Marquez, J. A., Colino, A., Presser, M. & Larranaga, M., 2014, Sustainable Places, October 1-3, 2014, Nice, France. 21 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  38. Published

    Improving concept design of divertor support system for FAST tokamak using TRIZ theory and AHP approach

    Di Ginorimo, G., Carfora, D., Esposito, G., Labate, C., Mozzillo, R., Renno, F., Lanzotti, A. & Siuko, M., 2014, In : Fusion Engineering and Design. 88, 11, p. 3014-3020 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    Improving the performance of DTP2 bilateral teleoperation control system with haptic augmentation

    Viinikainen, M., Tuominen, J., Alho, P. & Mattila, J., 2014, In : Fusion Engineering and Design. 89, 9-10, p. 2278-2282 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    Industrial cloud-based cyber-physical systems, The IMC-AESOP approach

    Colombo, A. W. (ed.), Bangemann, T. (ed.), Karnouskos, S. (ed.), Delsing, J. (ed.), Stluka, P. (ed.), Harrison, R. (ed.), Jammes, F. (ed.) & Martinez Lastra, J. L. (ed.), 2014, Cham: Springer. 245 p.

    Research output: Book/ReportAnthologyScientificpeer-review

  41. Published

    Influence of damage on inhomogeneous deformation behavior of amorphous glassy polymers. Modeling and algorithmic implementation in a finite element setting

    Holopainen, S., 2014, In : Engineering Fracture Mechanics. 114, p. 28-50 23 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Influence of laser hardening to the sliding wear resistance of the PVD (Al,Ti) N-G and nACo(Registered trademark) coatings

    Surzhenkov, A., Adoberg, E., Antonov, M., Sergejev, F., Mikli, V., Viljus, M., Latokartano, J. & Kulu, P., 2014, 22nd International Baltic Conference on Engineering Materials and Tribology, BALTMATTRIB 2013; Riga Latvia; 14 November 2013 through 15 November 2013. Trans Tech Publications Ltd, p. 28-31 4 p. (Key Engineering Materials; vol. 604).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Inkjet printed nano-particle Cu process for fabrication of re-distribution layers on silicon wafer

    Soltani, A., Kumpulainen, T. & Mäntysalo, M., 2014, 2014 IEEE 64th Electronic Components and Technology Conference (ECTC), 27-30 May 2014, Orlando, FL. Institute of Electrical and Electronics Engineers IEEE, p. 1685-1689 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Innovative tool for specifying customer requirements

    Ellman, A., Wendrich, R. & Tiainen, T., 2014, Proceedings of the ASME 2014 International Design and Engineering Technical Conferences & Computers and Information in Engineering Conference IDECT/CIE 2014, August 17-20, 2014, Buffalo, New York, USA. p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Interference-based overlapping particle tracking velocimetry for fluidized beds

    Kolehmainen, J., Elfvengren, J. & Saarenrinne, P., 2014, In : Experiments in Fluids. 55, 1825, p. 1-15 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Issue of using students as test users - some findings in VE testing

    Tiainen, T. & Ellman, A., 2014, Proceedings of the DESIGN 2014 13th International design conference, May 19-22, 2014, Dubrovnik - Croatia. Majanovic, D., Storga, M., Pavkovic, N. & Bojcetic, N. (eds.). Croatia: Facalty of Mechanical Engineering and Naval Architecture, University of Zagreb; The Design Society, Glasgow, p. 615-622 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Jet pump performance in liquid and gas pumping

    Mikkonen, A. & Karvinen, R., 2014, MFIP13, 13th International conference on multiphase flow in industrial plants, Mediterrean Foundation, Sestri Levante (Genova), Italy, 17-19 September 2014. Genova: Italian association of industrial plant enginnering; University of Genova Polytechnic school; Iltalian association of chemical engineering, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Kinodynamic Motion Planning for Autonomous Vehicles

    Choi, J., 2014, In : international Journal of Advanced Robotic Systems. 11, 90, p. 1-14 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Knowledge-based web service integration for industrial automation

    Ramis Ferrer, F. D. B., Gonzalez Moctezuma, L. E., Iarovyi, S., Lobov, A., Martinez Lastra, J. L., Vyatkin, V. & Dai, W., 2014, Proceedings 2014 12th IEEE International Conference on Industrial Informatics (INDIN), Porto Alegre, RS, Brazil, 27-30 July, 2014. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 733 - 739 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Local compression behaviour of pre-fatigued and chemically pre-treated wood at high strain rate and high temperature

    Moilanen, C., Engberg, B. A. K., Björkqvist, T., Salminen, L. & Saarenrinne, P., 2014, International Mechanical Pulping Conference, IMPC 2014, 2-5 June 2014, Helsinki, Finland, PULPAPER 2014, 3-5 June, 2014, Helsinki, Finland. AEL, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    Mapping of stress raising in laser clad components depending on geometry and defects

    Kaplan, F. H., Alam, M. M., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkala, T., Peltola, T. & Barsoum, Z., 2014, 67the IIW Annual Assembly & International Conference, 13th-18th July, 2014 Sheraton Grande Walkerhill & W Seoul Walkerhill, Seoul, Korea. Doc.IV-1174-14. p. 1-14

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

Previous 1...5 6 7 8 9 10 11 12 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.