Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    A New Hybrid Approach for Augmented Reality Maintenance in Scientific Facilities

    Martinez, H., Laukkanen, S. & Mattila, J., 2013, In : international Journal of Advanced Robotic Systems. 10, p. 1-10 10 p., 321.

    Research output: Contribution to journalArticleScientificpeer-review

  2. Published

    A New Method and Format for Describing CANopen System Topology

    Helminen, M., Salonen, J., Saha, H., Nykänen, O., Koskinen, K. T., Ranta, P. & Pohjolainen, S., 2012, Proceedings of the 13th International CAN Conference, iCC 2012 in Hambach Castle, March 5 to March 6, Germany. CAN in Automation e.V., p. 1-8 8 p. (International CAN Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  3. Published

    A new method to calculate natural convection heat transfer from a non-isothermal fin array

    Lampio, K. & Karvinen, R., 2015, Proceedings of the 7th Baltic Heat Transfer Conference, August 24-26 2015, Tallinn Estonia. Neshumayev, D. & Sunden, B. (eds.). Tallinn: Tallinn University of Technology, (Baltic Heat Transfer Conference BHTC).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    A new method to optimize natural convection heat sinks

    Lampio, K. & Karvinen, R., Aug 2018, In : Heat and Mass Transfer/Waerme- und Stoffuebertragung. 54, 8, p. 2571-2580

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    A New technique for torsional vibration measurements with digital image correlation

    Hasanen, M., Saarenrinne, P. & Kokko, V., 2013, The 26th International Congress of Condition Monitoring and Diagnostic Engineering Management, COMADEM 2013, 11-13 June, Helsinki. 6 p. (International Congress of Condition Monitoring and Diagnostic Engineering Management).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    An Exceptional Generalization of the Poisson Distribution

    Hagmark, P-E., 2012, In : Open Journal of Statistics. 2, p. 313-318

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    An executable capability concept in formal resource descriptions

    Siltala, N., Järvenpää, E. & Lanz, M., Sep 2018, In : IFAC-PapersOnLine. 51, 11, p. 102-107 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    An experimental and numerical study of the dynamic Brazilian disc test on Kuru granite

    Mardoukhi, A., Saksala, T., Hokka, M. & Kuokkala, V-T., 2015, Proceedings of the XII Finnish Mechanics Day. p. 210-215 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  9. Published

    An experimental investigation of scuffing initiation due to axial displacement in a rolling/sliding contact

    Savolainen, M. & Lehtovaara, A., Mar 2018, In : Tribology International. 119, p. 688-697

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    An extended second order polynomial model for hydraulic fluid density

    Karjalainen, J. P., Karjalainen, R. & Huhtala, K., 2013, Proceedings of the ASME/BATH 2013 Symposium on Fluid Power and Motion Control, FPMC2013, October 6-9, 2013, Sarasota, Florida. Sarasota, Florida, USA: ASME, p. 1-8 8 p. (Symposium on Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Angle Estimation for Robotic Arms on Floating Base Using Low-Cost IMUS

    Zhang, X., Peltola, E. & Mattila, J., May 2018, 2018 IEEE International Conference on Robotics and Automation (ICRA). IEEE, p. 1458-1465 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    An implementation of a semantic, web-based virtual machine laboratory prototyping environment

    Salonen, J., Nykänen, O., Ranta, P., Nurmi, J., Helminen, M., Rokala, M., Palonen, T., Alarotu, V., Koskinen, K. & Pohjolainen, S., 2011, In : Lecture Notes in Computer Science. 7032, p. 221-236

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    An incremental Petri Net-derived approach to modeling of flow and resources in service-oriented manufacturing systems

    Popescu, C. & Martinez Lastra, J. L., 2010, 8th IEEE International Conference on Industrial Informatics, INDIN 2010, 13-16 July, 2010, Osaka, Japan. p. 253-259

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    An information framework for estimation of instrument transformer cost

    Pavlic, D. & Vanhatalo, M., 2010, Proceeding of 11th International Design Conference DESIGN 2010, 17-20 May, 2010, Dubrovnik, Croatia. p. 1713-1720

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  15. Published

    An integrated approach to mixed-model assembly line balancing and sequencing

    Uddin, M. K., Cavia Soto, M. & Martinez Lastra, J. L., 2010, In : Assembly Automation. 30, 2, p. 164-172

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    An Investigation into Scuffing and Subsurface Fatigue in a Lubricated Rolling/Sliding Contact

    Savolainen, M., 28 Jun 2019, Tampere University. 81 p. (Tampere University Dissertations; vol. 57)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  17. Published

    Anisotropic viscodamage-viscoplastic consistency constitutive model with a parabolic cap for rocks with brittle and ductile behavior

    Saksala, T. & Ibrahimbegovic, A., 2014, In : International Journal of Rock Mechanics and Mining Sciences. 70, p. 460-473 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Anomaly Detection and Diagnostics of a Wheel Loader Using Dynamic Mathematical Model and Joint Probability Distributions

    Krogerus, T., Hyvönen, M., Backas, J. & Huhtala, K., 2015, Proceedings of the Fourteenth Scandinavian International Conference on Fluid Power, SICFP15. May 20-22, 2015. Tampere, Finland. Tampere University of Technology. Department of Intelligent Hydraulics and Automation, 14 p. (The Scandinavian International Conference on Fluid Power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    An ontology-based semantic foundation for flexible manufacturing systems

    Uddin, K. M., Dvoryanchikova, A., Lobov, A. & Martinez Lastra, J. L., 2011, Proceedings of the 37th IEEE International Conference on Industrial Electronics, IECON 2011, 7-10 November, 2011, Melbourne, Australia. Piscataway, NJ: IEEE, p. 293-311 (IEEE International Conference on Industrial Electronics IECON).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    An open energy consumption-relevant factory automation dataset in the cloud

    Zhang, B., Postelnicu, C., Jokinen, J. & Martinez Lastra, J. L., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 792-797 (IEEE International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    An open modelling approach for availability and reliability of systems

    Penttinen, J-P., Niemi, A., Gutleber, J., Koskinen, K., Coatanea, E. & Laitinen, J., Mar 2019, In : Reliability Engineering and System Safety. 183, p. 387-399 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    An open modelling approach for availability and reliability of systems - OpenMARS

    Penttinen, J-P., Niemi, A. & Gutleber, J., 30 Jan 2018, 47 p. EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH, CERN.

    Research output: Other contributionScientific

  23. Published

    An Optimal Controller for Hydrostatic Drives

    Backas, J., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 83-88 (Generic Intelligent Machines Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    A Novel Coaxially Laser-Assisted (COLA) Cold Spray System

    Allen, C., Marrocco, T., McNutt, P., Koivuluoto, H., Latokartano, J., Vuoristo, P. & Olsson, R., 2015, ITSC2015: International Thermal Spray Conference, May 11-14, 2015, Long Beach, California, USA. p. 210-216 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    A novel method of vibration modes selection for improving accuracy of frequency-based damage detection

    Pan, J., Zhang, Z., Wu, J., Ramakrishnan, K. & Singh, H. K., 15 Feb 2019, In : Composites Part B : Engineering. 159, p. 437-446 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    A Novel Time Optimal Path Following Controller with Bounded Velocities for Mobile Robots with Independently Steerable Wheels

    Oftadeh, R., Ghabcheloo, R. & Mattila, J., 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) November 3-7, 2013, Tokyo, Japan. Institute of Electrical and Electronics Engineers IEEE, p. 4845-4851 7 p. (IEEE/RSJ International Conference on Intelligent Robots and Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    A novel tool for assessing and improving make-to-order and assemble-to-order production systems

    Koho, M. & Torvinen, S., 2011, Enabling Manufacturing Competitiveness and Economic Sustainability, Proceedings of the 4th International Conference on Changeable, Agile, Reconfigurable and Virtual production CARV2011, Montreal, Canada, 2-5 October 2011. ElMaraghy, H. (ed.). Berlin: Springer, p. 533-538 (International Conference on Changeable, Agile, Reconfigurable and Virtual production CARV).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    A numerical model for the calculation of fretting fatique crack initiation for a smooth line contact

    Lehtovaara, A., Lönnqvist, C. & Mäntylä, A., 2010, In : Tribologia - Finnish Journal of Tribology. 29, 1, p. 7-16

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    A packet scheduler for real-time 6LoWPAN wireless networks in manufacturing systems

    Santillan Martinez, G., Delamer, I. M. & Martinez Lastra, J. L., 2014, In : Journal of Intelligent Manufacturing. 10845, 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    A parameter study of a digital pump

    Jaurola, M. & Huhtala, K., 2010, Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK. Johnston, D. N. & Plummer, A. (eds.). p. 203-215

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    A perfect fit

    Lehtinen, J., Pajunen, S. & Heinonen, O., 2013, In : Ansys Advantage. 7, 2, p. 26-29 4 p.

    Research output: Contribution to journalArticleProfessional

  32. Published

    A performance evaluation concept for production systems in an SME network

    Mahmood, K., Lanz, M., Toivonen, V. & Otto, T., 27 Jun 2018, In : Procedia CIRP. 72, p. 603-608 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    A Petri net-based approach to incremental modelling of flow and resources in service-oriented manufacturing systems

    Popescu, C., Cavia Soto, M. & Martinez Lastra, J. L., 2012, In : International Journal of Production Research. 50, 2, p. 325-343

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    A positive tensions PID controller for a planar cable robot: An experimental study

    Khosravi, M. A., Taghirad, H. D. & Oftadeh, R., 2013, 2013 1st RSI/ISM International Conference on Robotics and Mechatronics, ICRoM 2013, Tehran, Iran, 13.-15.2.2013. p. 325-330 6 p. (International Conference on Robotics and Mechatronics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    A Potential Field and Bug Compound Navigation Algorithm for Nonholonomic Wheeled Robots

    Choi, J-W., 2012, ICIES2012, The 1st International Conference on Innovative Engineering, 7-9 December 2012, Alexandria, Egypt,. Institute of Electrical and Electronics Engineers IEEE, p. 166-171 6 p. (International Conference on Innovative Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    A Potential Field and Bug Compound Navigation Algorithm for Nonholonomic Wheeled Robots

    Choi, J., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 62-70 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Applicability of market-based competition models for energy efficient factory automation systems

    Postelnicu, C. & Martinez Lastra, J. L., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 326-330 (IEEE International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Application of a Capability-based Adaptation Methodology to a Small-size Production System

    Järvenpää, E., Lanz, M. & Tuokko, R., 2016, In : International Journal of Manufacturing Technology and Management. 30, 1/2, p. 67-86 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    Application of Design Review to Probabilistic Risk Assessment in a Large Investment Project

    Virtanen, S., Penttinen, J-P., Kiiski, M. & Jokinen, J., 2014, Proceedings of the Probabilistic Safety Assessment and Management PSAM12, June 2014, Honolulu, Hawaii. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Application of mems sensor fusion in hydraulic boom control

    Honkakorpi, J. & Mattila, J., 2010, Proceedings of the Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, CERN, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Accepted/In press

    Application of simultaneous localization and mapping for large-scale manipulators in unknown environments

    Mäkinen, P., M. Aref, M., Mattila, J. & Launis, S., Nov 2019, (Accepted/In press) The 9th IEEE International Conference on Cybernetics and Intelligent Systems (CIS) and the 9th IEEE International Conference on Robotics, Automation and Mechatronics (RAM): 18-20 November, 2019, Bangkok, Thailand. IEEE, 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Application of the generic modelling method fo system of systems to manufacturing domain

    Zhou, B., Dvoryanchikova, A., Lobov, A., Minor, J. & Martinez Lastra, J. L., 2011, Proceedings of the 37th IEEE International Conference on Industrial Electronics, IECON 2011, 7-10 November, 2011, Melbourne, Australia. Piscataway, NJ: IEEE, p. 305-311 (IEEE International Conference on Industrial Electronics IECON).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Applications and business models for micro and desktop production systems

    Nurmi, A., Heikkilä, R. & Tuokko, R., 2012, Proceedings of the 8th International Workshop on Microfactories, IWMF 2012, 18-20 June, 2012, Tampere Hall, Tampere, Finland. Reijo, T., Minna, L. & Pasi, L. (eds.). Tampere: Tampere University of Technology, p. 1-10 10 p. (International Workshop on MicroFactories).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Applying self-organizing maps to condition monitoring of hydraulic systems

    Krogerus, T., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    ARC - Arktinen ajoneuvo- ja työkonetestaustoiminta

    Aaltonen, K., Haataja, M., Hietala, J-P., Leinonen, O., Moilanen, M., Multanen, P., Mäkinen, E., Petursdottir, J., Popov, M. & Väisänen, I., 2013, Oulun yliopisto. 122 p. (Oulun Yliopisto. Konetekniikan osasto. Raportti; vol. 133)

    Research output: Book/ReportCommissioned reportProfessional

  46. Published

    Architectures and interfaces for a micro factory concept

    Siltala, N., Heikkilä, R., Vuola, A. & Tuokko, R., 2010, Proceedings of 5th IFIP WG 5.5, International Precision Assembly Seminar, IPAS 2010, 14-17 February, 2010, Chamonix, France. Ratchev, S. (ed.). p. 293-300

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    A reduced-order unscented kalman filter independent of loading conditions for leakage fault detection and isolation in hydraulic systems

    Nurmi, J. & Mattila, J., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 57-74 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. A refining surface for a refiner for defibering material containing lignocellulose

    Huhtanen, J-P. & Karvinen, R., 2011, Patent No. Pat. CA 2490717, Priority No. (30) 2002/07/02(30) FI20021310

    Research output: PatentScientific

  49. Published

    A Semantically Enhanced Approach for Orchestration of Web Services in Factory Automation Systems

    Puttonen, J., 15 Aug 2014, Tampere: Tampere University of Technology. 157 p. (Tampere University of Technology. Publication; no. 1224)

    Research output: Book/ReportDoctoral thesisMonograph

  50. Published

    A Semantic web services-based approach for production systems control

    Puttonen, J., Lobov, A., Cavia Soto, M. A. & Martinez Lastra, J. L., 2010, In : Advanced Engineering Informatics. 24, 3, p. 285-299

    Research output: Contribution to journalArticleScientificpeer-review

  51. Published

    A Semi-Fidelity Training Simulator: Promising Opportunities for Student-Centered Learning

    Kaapu, T., Tiainen, T. & Ellman, A., 2014, Proceedings of the 22nd European Conference on Information Systems, ECIS 2014, June 9-11, 2014,Tel Aviv. 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  52. Published

    A service-oriented monitoring system of pressurized air in industrial systems for energy awareness

    Rabeko, P., Lobov, A. & Martinez Lastra, J. L., 2011, GlobeNet 2011, The Sixth International Conference on Systems, ICONS 2011, 23-28 January, 2011, St. Maarten, The Netherlands Antilles. St. Maarten: IARIA, p. 150-156 (International Conference on Systems ICONS GlobeNet).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  53. Published

    A simplified model of CO2-gas cooler

    Aittomäki, E. A., 2010, IIR/ Eurotherm, Sustainable Refrigeration and Heat Pump Technology Conference and 2nd IIR Workshop on Refrigerant Charge Reduction in Refrigeration Systems, Royal Institute of Technology (KTH), Stockholm, Sweden, on June 13-17, 2010. p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  54. Published

    Aspects of the energy consumption of a digital hydraulic power management system supplying a digital and proportional valve controlled multi actuator system

    Karvonen, M., Heikkilä, M., Tikkanen, S., Linjama, M. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  55. Published

    Assembly line balancing and sequencing

    Uddin, K. M. & Martinez Lastra, J. L., 2011, Assembly Line - Theory and Practice. Grzechca, W. (ed.). Croatia: InTech, p. 13-36

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  56. Published

    Assessment of IEC-61499 and CDL for function block composition in factory-wide system integration

    Ramis, B., Garcia, J. & Martinez Lastra, J. L., 2013, Proceedings 2013 IEEE international conference on industrial informatics INDIN, Bochum, Germany, July 29-31, 2013. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 212-217 6 p. (IEEE international conference on industrial informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  57. Published

    Assistive Obstacle-Free Path Planning in the Image Space for Teleoperation Tasks Using Monocular Camera

    Ziaei, Z., Oftadeh, R. & Mattila, J., 2014, 18th International Conference on System Theory, Control and Computing, ICSTCC 2014, October 17-19, 2014, Sinaia, Romania. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 838-844 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  58. Published

    Association of exercise loading history with fall-induced hip fracture risk.

    Abe, S., Narra, N., Nikander, R., Hyttinen, J., Kouhia, R. & Sievänen, H., 2017.

    Research output: Other conference contributionPaper, poster or abstractScientific

  59. Published

    A Survey of Analysis, Modeling, and Diagnostics of Diesel Fuel Injection Systems

    Krogerus, T. R., Hyvönen, M. P. & Huhtala, K. J., 2016, In : Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 138, 8, p. 1 11 p., 081501.

    Research output: Contribution to journalArticleScientificpeer-review

  60. Published

    Augmented reality aiding collimator exchange at the LHC

    Martinez, H., Fabry, T., Laukkanen, S., Mattila, J. & Tabourot, L., 2014, In : Nuclear instruments and Methods in Physics Research Section A: Accelerators Spectrometers Detectors and Associated Equipment. 763, p. 354-363 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  61. Published

    Augmented reality for operator assistance

    Kolu, A., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 9-13 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  62. Published

    A unified lcf-hcf model based on continuum mechanics

    Kouhia, R., Holopainen, S., Ottosen, N. S., Matti, R. & Saksala, T., 2016. 4 p.

    Research output: Other conference contributionPaper, poster or abstractScientific

  63. Published

    A unified ontology namespace for enterprise integration - a digital twin case study

    David, J., Martikkala, A., Lobov, A. & Lanz, M., 2019, The 5th Forum Instrumentation Engineering, Electronics and Telecommunications – 2019, (IEET–2019): November 20–22, 2019, Izhevsk, Russian Federation. 5 ed. Izhevsk, Russian Federation: Publishing House of Kalashnikov ISTU, p. 13-22 5 p. (Instrumentation Engineering, Electronics and Telecommunications ).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  64. Published

    A use case analysis method for the implementation of service-oriented solutions for monitoring and diagnostics

    Macchi, M., Fumagalli, L., Garetti, M., Tavola, G., Checcozzo, R., Rusina, F., Vidales Ramos, A., Jokinen, J., Popescu, C., Martinez Lastra, J., Karhumäki, O. & Vainio, M., 2011, Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management, COMADEM 2011, Advances in Industrial Asset Integrity Management, 30 May-1 June 2011, Stavanger, Norway. Singh, M., Rao, R. B. K. N. & Liyanage, J. P. (eds.). Stavanger: COMADEM International, p. 406-413 (International Congress on Condition Monitoring and Diagnostic Engineering Management COMADEM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  65. Published

    Automaattinen öljyn epäpuhtauksien mittaus ja keskeiset standardit

    Multanen, P., Niiranen, E., Elo, L. & Rinkinen, J., 2014, PAMAS 2014 Käyttäjäpäivä, 4.2.2014, Tampereen teknillinen yliopisto, Tampere. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). Tampere: Tampereen teknillinen yliopisto, p. 43-70 28 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  66. Published

    Automated control system for indoor air quality management

    Aslam, Z., Khalid, W., Ahmed, T. & Marghoob, D., 1 Nov 2017, 2017 International Conference on Energy Conservation and Efficiency (ICECE). IEEE, p. 85-88 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  67. Published

    Automated high-throughput microbond tester for interfacial shear strength studies

    von Essen, M., Sarlin, E., Tanhuanpää, O., Kakkonen, M. M. S., Laurikainen, P., Hoikkanen, M., Haakana, R., Vuorinen, J. & Kallio, P., 2017, Proceedings of SAMPE Conference 17 Stuttgart. SAMPE Europe, 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  68. Published

    Automated object locator in a forest forwarder

    Hahto, A., Mattila, J. & Koivisto, H., 2010, In : Applied Artificial Intelligence. 24, 7, p. 711-721

    Research output: Contribution to journalArticleScientificpeer-review

  69. Published

    Automatic design of marine structures by using successive response surface method

    Pajunen, S. & Heinonen, O., 2013, In : Structural and Multidisciplinary Optimization. p. 1-9 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  70. Published

    Automotive transmission system design based on reliability parameters

    Douzi, I. K., Virtanen, S. & Verma, A. K., 2012, In : Journal of Reliability and Statistical Studies. 5, 2, p. 2229-5666

    Research output: Contribution to journalArticleScientificpeer-review

  71. Published

    Autonomous and collaborative offshore robotics

    Villa Escusol, J., Aaltonen, J. & Koskinen, K., 2017, Proceedings of the 2nd Annual SMACC Research Seminar 2017. Tampere University of Technology, p. 57-59 3 p. 15

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  72. Published

    Autonomous fleet management utilizing OpenSplice DDS

    Rasi, T., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 88-102 15 p. (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  73. Published

    Autonomous pallet picking of GIM machine

    Hyvönen, M., Ghabcheloo, R., Mantere, P., Kolu, A. & Huhtala, K., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 30-36 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  74. Published

    Availability modeling approach for future circular colliders based on the LHC operation experience

    Niemi, A., Apollonio, A., Gutleber, J., Sollander, P., Penttinen, J-P. & Virtanen, S., 2016, In : Physical Review Special Topics: Accelerators and Beams. 19, 12, 121003.

    Research output: Contribution to journalArticleScientificpeer-review

  75. Published

    A web tool supporting the management and use of electronic module descriptions for evolvable production systems

    Siltala, N. & Tuokko, R., 2010, Proceedings of 2010 IEEE International Symposium on Industrial Electronics, ISIE 2010, 4-7 July, 2010, Bari, Italy. p. 2641-2646

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  76. Published

    Betonin ajasta riippumattomat materiaalimallit

    Kouhia, R., 2013, Unknown Publisher. 83 p. (Liikenneviraston tutkimuksia ja selvityksiä; no. 38)

    Research output: Book/ReportCommissioned reportProfessional

  77. Published

    Big data analytics for the Future Circular Collider reliability and availability studies

    Begy, V., Apollonio, A., Gutleber, J., Martin-Marquez, M., Niemi, A., Penttinen, J-P., Rogova, E., Romero-Marin, A. & Sollander, P., 23 Nov 2017, 22nd International Conference on Computing in High Energy and Nuclear Physics (CHEP2016). IOP Publishing, ( Journal of Physics: Conference Series; vol. 898).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  78. Published

    Big data tulee – nykytila ja tulevaisuuden mahdollisuudet

    Holopainen, S. (Guest ed.) & Kuusi, O. (Guest ed.), Jun 2016, In : Futura. 2, 113 p.

    Research output: Contribution to journalSpecial issueScientificpeer-review

  79. Published

    Bio-hybrid nanocomposite packaging materials from polysaccharides and nanoclay

    Vartiainen, J., Tuominen, M., Nättinen, K., Tammelin, T., Pere, J., Tapper, U. & Harlin, A., 2010, ICOST Action: FA0904, Conference and WGs Meeting, June 28-29, 2010, Iasi, Romania. Vasile, C. & Ciolacu, D. (eds.). p. 29-29

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  80. Published

    Bounded-Velocity Motion Control of Four Wheel Steered Mobile Robots

    Oftadeh, R., Aref, M. M., Ghabcheloo, R. & Mattila, J., 2013, 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2013, Mechatronics for Human Wellbeing, July 9-12, 2013, Wollongong, Australia. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 255-260 6 p. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  81. Published

    Breaking down the requirements: Reliability in remote handling software

    Alho, P. & Mattila, J., 2013, In : Fusion Engineering and Design. 88, 9-10, p. 1912-1915 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  82. Published

    Brownfield Process: A Method for the Rationalisation of Existing Product Variety towards a Modular Product Family

    Pakkanen, J., 29 May 2015, Tampere University of Technology. 283 p. (Tampere University of Technology. Publication; vol. 1299)

    Research output: Book/ReportDoctoral thesisMonograph

  83. Published

    Brownfield Process: A method for modular product family development aiming for product configuration

    Pakkanen, J., Juuti, T. & Lehtonen, T., 2016, In : DESIGN STUDIES. 45B, p. 210-241 32 p.

    Research output: Contribution to journalArticleScientificpeer-review

  84. Published

    Brownfield process for developing of product families

    Lehtonen, T., Pakkanen, J., Järvenpää, J., Lanz, M. & Tuokko, R., 2011, Proceedings of the 18th International Conference on Engineering Design, ICED 11, 15-18 August, 2011, Technical University of Denmark, Copenhagen, Denmark. Culley, S. J., Hicks, B. J., McAloone, T. C., Howard, T. J. & Clarkson, J. (eds.). Glasgow: The Design Society, p. 248-257 (International Conference on Engineering Design ICED; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  85. Published

    Brownfield process for the rationalisation of existing product variety towards a modular product family

    Pakkanen, J., Juuti, T. & Lehtonen, T., 2015, ICED 15, vol 7: Product Modularisation, Product Architecture, Systems Engineering, Product Service Systems. Weber, C., Husung, S., Cascini, G., Cantamessa, M., Marjanovic, D. & Rotini, F. (eds.). The Design Society, Vol. 7. 10 p. (International Conference on Engineering Design).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  86. Published

    Bubble dynamics and interactions with a pair of micro pillars in tandem

    Elcocka, D., Honkanen, M., Kuoc, C., Amitaya, M. & Pelesa, Y., 2011, In : International Journal of Multiphase Flow. 37, 5, p. 440-452

    Research output: Contribution to journalArticleScientificpeer-review

  87. Published

    Calibration and compensation of deflections and compliances in remote handling equipment configurations

    Kivelä, T., Saarinen, H., Mattila, J., Hämäläinen, V., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2043-2046

    Research output: Contribution to journalArticleScientificpeer-review

  88. Published

    Capability-based adaptation of production systems in a changing environment

    Järvenpää, E., 2012, Tampere: Tampere University of Technology. 168 p. (Tampere University of Technology. Publication; vol. 1082)

    Research output: Book/ReportDoctoral thesisMonograph

  89. Published

    Capability-Based Adaptation of Production Systems - Practical Case Study in TUT-Microfactory Environment

    Järvenpää, E., Lanz, M. & Tuokko, R., 2013, 5th International conference on advanced design and manufacture, 25-28 September 2013, Valencia, Spain. Su, D. & Zhu, S. (eds.). Trans Tech Publications, p. 245-248 4 p. (Key Engineering Materials; vol. 572).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  90. Published

    Capability-Based Approach for Evaluating the Impact of Product Requirement Changes on the Production System

    Järvenpää, E. & Torvinen, S., 2013, 23rd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 13, The challenge of sustaining global competitive manufacturing system, 26-28 June 2013 Porto Portugal, Advances in Sustainable and Competitive Manufacturing Systems. Azevedo, A. (ed.). Switzerland: Springer International Publishing, p. 173-185 13 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  91. Published

    Capability-based ontological resource model and rules for describing and assigning resources in sheet metal manufacturing

    Järvenpää, E., Lohtander, M. & Tuokko, R., 2013, 2013 IEEE International Symposium of Assembly and Manufacturing (ISAM), July 30th – Aug 2nd 2013, Xi’an, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 105-108 3 p. (International Symposium on Assembly and Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  92. Published

    Capability Matchmaking Procedure to Support Rapid Configuration and Re-configuration of Production Systems

    Järvenpää, E., Siltala, N., Hylli, O. & Lanz, M., Sep 2017, In : Procedia Manufacturing. 11, p. 1053-1060 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  93. Published

    Capability of the turret punch press process: Intelligence between design and manufacturing

    Lohtander, M., Järvenpää, E. & Varis, J., 2013, 2013 IEEE International Symposium of Assembly and Manufacturing (ISAM), July 30th – Aug 2nd 2013, Xi’an, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 180-182 3 p. (International Symposium on Assembly and Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  94. Published

    Capturing the flows of the product process

    Pakkanen, J., Becker, I., Lehtonen, T. & Juuti, T., 2012, The 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Dorian, M., Mario, S., Neven, P. & Nenad, B. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, p. 1557-1566 (International Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  95. Published

    Case: Control application for rapidly configurable manufacturing laboratory environment

    Siltala, N., Vihinen, J. & Tuokko, R., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Production Engineering, p. 217-224 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  96. Published

    Case study on engineering change management and digital manufacturing

    Leino, S-P., Jokinen, L., Anttila, J-P. & Pulkkinen, A., 2015, IFIP Advances in Information and Communication Technology. Springer New York LLC, Vol. 467. p. 591-600 10 p. (IFIP Advances in Information and Communication Technology; vol. 467).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  97. Published

    Case study on the relation of PLM maturity, architecture and business processes

    Pulkkinen, A., Vainio, V. & Rissanen, N., 2013, Product Lifecycle Management for Society, Proceedings of 10th IFIP WG 5.1 International conference, PLM 2013, Nantes, France, July 6-10, 2013,. Bernard, A., Rivest, L. & Dutta, D. (eds.). Berlin: Springer, p. 432-438 7 p. (IFIP Advances in Information and Communication Technology; vol. 409).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  98. Published

    Categorization of ITER remote handling operations

    Salminen, K., Aha, L., Saarinen, H., Siuko, M., Mattila, J. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2075-2077

    Research output: Contribution to journalArticleScientificpeer-review

  99. Published

    Cavitation erosion resistance assessment and comparison of three francis turbine runner materials

    Ylönen, M., Saarenrinne, P., Miettinen, J., Franc, J-P., Fivel, M. & Nyyssönen, T., 26 Oct 2018, In : Materials Performance and Characterization. 7, 5, p. 1107-1126 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  100. Published

    CFD Based Modelling for Predicting Fouling and Corrosion in Kraft Recovery Boilers

    Leppänen, A., Välimäki, E. & Oksanen, A., 2011, 19th European Biomass Conference and Exhibition, 6-10 June 2011, Berlin Germany. Berlin: European Biomass Conference and Exhibition, p. 1033-1040 (European Biomass Conference and Exhibition).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...13 Next
Download list To download, please limit the number of search results to 1,000 or less.