Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    Detection and isolation of faults in mobile hydraulic valves based on a reduced-order model and adaptive thresholds

    Nurmi, J. & Mattila, J., 2013, Proceedings of ASME/BATH 2013 Symposium on Fluid Power and Motion Control, FPMC2013, October 6-9, 2013, Sarasota, Florida. Sarasota, Florida, USA: ASME, p. 1-10 10 p. (Symposium on Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  2. Published

    Detection and isolation of leakage and valve faults in hydraulic systems in varying loading conditions

    Nurmi, J., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 80-88 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Detection and isolation of leakage and valve faults in hydraulic systems in varying loading conditions, Part 1: Global sensitivity analysis

    Nurmi, J. & Mattila, J., 2011, In : International Journal of Fluid Power. 12, 3, p. 41-51

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Detection and isolation of leakage and valve faults in hydraulic systems in varying loading conditions, Part 2: Fault detection and isolation scheme

    Nurmi, J. & Mattila, J., 2012, In : International Journal of Fluid Power. 13, 1, p. 17-27

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Detection of abnormal energy patterns pointing to gradual conveyor misalignment in a factory automation testbed

    Khajehzadeh, N., Postelnicu, C. & Martinez Lastra, J. L., 2012, Proceedings of 2012 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2012, 14-17 October, 2012, COEX, Seoul, Korea. Piscataway, NJ: IEEE, p. 1225-1229 (International Conference on Systems, Man, and Cybernetics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Developed measuring methods for hydraulic fluid dynamics and viscosity at extreme pressures and temperatures

    Karjalainen, J-P., Karjalainen, R. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Developing competitive and sustainable performance metrics for an intelligent manufacturing environment

    Nylund, H., Lanz, M., Ranta, A., Ikkala, K. & Tuokko, R., 2010, Proceedings of International Scientific Conference on Management of Technology - Step to Sustainable Production, MOTSP 2010, 2-4 June, 2010, Rovinj, Croatia. Baric, G. & Dukic, G. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  8. Published

    Developing engineering creativity in the early design stages of product development process

    Ryynänen, L. & Riitahuhta, A., 2010, Proceedings of The First International Conference on Design Creativity, ICDC 2010, 29 November-1 December, 2010, Kobe, Japan. p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  9. Published

    Developing VIP2M: A Virtual Environment for Prototyping Mobile Work Machines

    Kuusisto, J., Kaapu, T., Ellman, A. & Tiainen, T., 2012, Proceedings of the 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Marjanovic, D., Storga, M., Pavkovic, N. & Bojcetic, N. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, The Design Society, Glasgow, p. 657-666 (International Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Development and numerical implementation of an anisotropic continuum damage model for concrete

    Hartikainen, J., Kolari, K. & Kouhia, R., 2016, Advances in Fracture and Damage Mechanics XV. Trans Tech Publications Ltd, p. 115-118 4 p. (Key Engineering Materials; vol. 713).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Development of a complete contact fretting test device

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 2013, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 227, 6, p. 570-578

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Development of a rule-base for matching product requirements against resource capabilities in an adaptive production system

    Järvenpää, E., Luostarinen, P., Lanz, M. & Tuokko, R., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing , FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Production Engineering, p. 449-456 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Development of a test device for the evaluation of hydrodynamic lubrication in thrust bearings

    Pasanen, A., Kleemola, J. & Lehtovaara, A., 2008, In : Tribologia - Finnish Journal of Tribology. 27, 4, p. 12-20

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Development of a test device for the evaluation of journal bearings

    Sandvik, K., Lehtovaara, A., Makkonen, E., Kallio, M., Kuvaja, K. & Kuokkala, V-T., 2012, In : Tribologia - Finnish Journal of Tribology. 31, 1-2, p. 12-21

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Development of a test rig for reciprocating seals in heavy load conditions

    Juoksukangas, J., Lehtovaara, A., Miettinen, J., Tolvanen, P., Järvelä, P. & Niemi, A-M., 2010, 14th Nordic Symposium on Tribology, Nordtrib 2010, Storforsen, Sweden, Luleå University of Technology. p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Development of Controllers Using Simulink and Contract-Based Design. Chapter 8

    Boström, P., Huova, M., Olszewska, M., Linjama, M., Heikkilä, M., Sere, K. & Walden, M., 2011, Dependability and Computer Engineering: Concepts for Software-Intensive Systems. Petre, L., Sere, K. & Troubitsyna, E. (eds.). Hershey, PA: IGI Global, p. 151-169

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  17. Published

    Development of DTP2 subsystems and tooling in support of remote handling trials

    Mattila, J., 2008, Espoo: VTT. 7 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  18. Published

    Development of intelligent gripper systems for microfactories

    Heikkilä, R., Prusi, T., Ha, T. H., Song, J. Y., Lee, C. W. & Tuokko, R., 2011, 7th International Workshop on Micromanufacturing Technology, IWMT 2011, 18 August, 2011, Jeju-do, Korea. Jeju-do: IWMT 2011, p. 26-28 (International Workshop on Micromanufacturing Technology IWMT).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  19. Published

    Development of micro gripper systems for microfactories

    Heikkilä, R., Remes, M., Prusi, T. & Tuokko, R., 2008, Proceedings of the 4th International Workshop on Microfactory Technology, 10-11 July, 2008, Jeju-do, Korea. p. 4 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  20. Published

    Development of process for adaptive lifetime estimation of mechanical assemblies using accelerated testing methods

    Hietala, J-P., Ojala, P., Multanen, P., Miettinen, J. & Saarenrinne, P., 26 Oct 2016, Risk, Reliability and Safety: Innovating Theory and Practice : Proceedings of the 26th European Safety and Reliability Conference, ESREL 2016, Glasgow, Scotland, 25-29 September 2016. Walls, L., Revie, M. & Bedford, T. (eds.). CRC Press; Taylor & Francis, 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Development of water hydraulic manipulator for the remote handling of heavy duty components

    Muhammad, A., Valkama, P., Siuko, M., Mattila, J. & Vilenius, M., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Development process of control system

    Ahopelto, M., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-7 7 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    DFMA Implementation in high variability product context

    Lahtinen, T., Berkovits, J. & Riitahuhta, A., 2012, Proceedings of the 9th International Symposium on Tools and Methods of Competitive Engineering, TMCE 2012, 7-11 May, 2012, Karlsruhe, Germany. Imre, H., Zoltan, R., Albert, A. & Mathias, B. (eds.). Delft, Netherlands: Delft University of Technology, p. 915-926 (International Symposium on Tools and Methods of Competitive Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Diagnosis of multi-descriptor condition monitoring data

    Lumme, V., 2011, 2011 IEEE Conference on Prognostics and Health Management PHM, 20.-23.6.2011, Denver, CO, USA. Piscataway, NJ: IEEE, p. 1-10 10 p. 6024327. (IEEE Conference on Prognostics and Health Management PHM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Digitaalihydrauliikan seminaarin satoa Tampereella

    Linjama, M., 2013, In : Fluid Finland. 12, 1, p. 8-8 1 p.

    Research output: Contribution to journalArticleProfessional

  26. Published

    Digitaalihydrauliikka tulee!

    Linjama, M., 2010, In : Metsäalan ammattilehti. 5, p. 88-89

    Research output: Contribution to journalArticleProfessional

  27. Published

    Digitaalinen Hydraulisäätö - tulevaisuuden tekniikkaa?

    Siivonen, L., 2012, In : Promaint. 26, 7, p. 41-43

    Research output: Contribution to journalArticleProfessional

  28. Published

    Digital flow control unit for controlling amount of water used for binding dust

    Laamanen, A., Anttonen, P. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 119-128

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Digital fluid power - state of the art

    Linjama, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 331-354 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Digital Hydraulic Cylinder Drive For Folding Cargo Hatches

    Westerlund, S. & Mäkinen, E., 2012, Proceedings of the 7th FPNI PhD Symposium on Fluid Power, University of Modena and Reggio Emilia, June 27-30, 2012, Reggio Emilia, Italy. Milani, M., Montorsi, L. & Paltrinieri, F. (eds.). Fluid Power Net International, p. 235-248 (Fluid Power Net International PhD Symposium; vol. 7).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Digital hydraulic multi-pressure actuators - simulation study of a forwarder crane

    Heikkilä, M., Huova, M. & Linjama, M., 28 Feb 2019, The 10th Workshop on Digital Fluid Power : February 28th - March 1st, 2019, Linz, Austria. Linz Center of Mechatronics, 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  32. Published

    Digital Hydraulic Power Management System - Measured Characteristics of a Second Prototype

    Heikkilä, M., Tammisto, J., Linjama, M. & Huhtala, K., May 2016, Proceedings of the Eighth Workshop on Digital Fluid Power (DFP16) . Uusi-Heikkilä, J. & Linjama, M. (eds.). p. 69-81 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Digital hydraulic power management system - towards lossless hydraulics

    Linjama, M. & Huhtala, K., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 5-22

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Digital Hydraulic Pressure Relief Function

    Ketonen, M., Huova, M., Heikkilä, M., Linjama, M., Boström, P. & Walden, M., 2012, Fluid Power and Motion Control, FPMC 2012, University of Bath, UK. Johnston, D. N. & Plummer, A. R. (eds.). Bath, United Kingdom: Centre for Power Transmission and Motion Control, University of Bath, ASME, p. 137-150 (Bath/ASME Symposium on Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Digital Hydraulics Applied Research - Marine Hydraulics

    Mäkinen, E., Kukkonen, S. & Perukangas, M., 2014, Tampere: FIMECC Oy. 3 p. (FIMECC Publications Series; no. 2)

    Research output: Book/ReportCommissioned reportProfessional

  36. Published

    Digital hydraulics in workboat propulsion control

    Perukangas, M. & Mäkinen, E., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 153-166

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Digital Hydraulic System

    Sipola, A., Vihtanen, H-P., Linjama, M. & Laamanen, A., 2014, Patent No. Australian Patent Office, AU 2009300985 B2, Priority date 8 May 2014, Priority No. (31) 20085958 : (21) 2009300985

    Research output: PatentScientific

  38. Published

    Digital Image Correlation as a Measurement Tool for Heart Surgery

    Hokka, M., 2017, Proceedings of the Annual Meeting of the International Digital Image Correlation Society, Barcelona.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  39. Published

    Digital image correlation method in hydro turbine shaft torque and vibration monitoring

    Saarenrinne, P., Miettinen, J., Ylönen, M. & Kokko, V., 27 Oct 2015, Proceedings of the Hydro 2015 Bordeaux 26-28 October 2015. Hydro Power & Dams, 8 p. 08.06

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  40. Published

    Digital image correlation study of the deformation and functioning of the human heart during open-heart surgery

    Soltani, A., Curtze, S., Lahti, J., Järvelä, K., Laurikka, J., Hokka, M. & Kuokkala, V. T., 2018, Mechanics of Biological Systems, Materials and other topics in Experimental and Applied Mechanics - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Springer New York LLC, Vol. 4. p. 19-27 9 p. (Conference Proceedings of the Society for Experimental Mechanics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Digital Imaging and Piezo-dispenser Actuator in Automatic Flocculation Control

    Tomperi, J., Honkanen, M., Kallio, P., Leiviskä, K., Saarenrinne, P., Joensuu, I. & Piironen, M., 2012, In : Sensors and Transducers. 136, 1, p. 83-95

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Digital manufacturing supporting autonomy and collaboration of manufacturing systems

    Nylund, H. & Andersson, P. H., 2012, Manufacturing systems. Faieza, A. A. (ed.). Rijeka, Croatia: InTech, p. 261-284

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  43. Published

    Digital manufacturing supporting competitive and sustainable collaboration for networked production

    Nylund, H. & Andersson, P. H., 2010, Proceedings of the 5th International Conference on Advances in Production Engineering, APE'2010, Warsaw University of Technology, Warsaw, Poland. p. 543-552

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  44. Published

    Digital manufacturing supporting integrated improvement of products and production systems

    Nylund, H. & Andersson, P. H., 2010, Proceedings of 17th CIRP International Conference on Life Cycle Engineering, LCE 2010, 19-21 May, 2010, Hefei, China. China: Hefei University of Technology, p. 156-161

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Digital Microhydraulics

    Laamanen, A. & Linjama, M., 2014, Tampere: FIMECC Oy. 4 p. (FIMECC Publications Series; no. 2)

    Research output: Book/ReportCommissioned reportProfessional

  46. Published

    Digital valve system for ITER remote handling – Design and prototype testing

    Siivonen, L., Paloniitty, M., Linjama, M., Sairiala, H. & Esqué, S., Sep 2019, In : Fusion Engineering and Design. 146, p. 1637 - 1641

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Dimensional analysis conceptual modeling supporting adaptable reasoning in simulation-based training

    Coatanea, E. & Roca, R., 7 Aug 2018, 2018 13th System of Systems Engineering Conference, SoSE 2018. IEEE, p. 245-252 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Dimension reduction and decomposition using causal graph and qualitative analysis for aircraft concept design optimization

    Wu, D., Coatanea, E. & Wang, G. G., 2017, 43rd Design Automation Conference. The American Society of Mechanical Engineers ASME

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Direct computation of critical equilibrium states for spatial beams and frames

    Mäkinen, J., Kouhia, R., Fedoroff, A. & Marjamäki, H., 2012, In : International Journal for Numerical Methods in Engineering. 89, 2, p. 135-153

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    Direct connection of digital hydraulic power management system and double acting cylinder - a simulation study

    Heikkilä, M. & Linjama, M., 2011, The Fourth Workshop on Digital Fluid Power, 21st-22nd November, 2011, Linz, Austria. Linz: DFP-Workshops, p. 59-74 (Workshop on Digital Fluid Power; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    Discovering material recovery scenarios for industrial machinery: A case-based approach

    Bernstein, W. Z., Ramanujan, D., Koho, M., Zhao, F. & Ramani, K., 2012, ASME 2012 International Manufacturing Science and Engineering Conference (MSEC) collocated with the 40th North American Manufacturing Research Conference and in participation with the International Conference on Tribology Materials and Processing, Notre Dame, IN, USA, 4-8 June, 2012. ASME, p. 1097-1104 8 p. (ASME International Manufacturing Science and Engineering Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  52. Published

    Discussion: Is the future of fluid power digital? Response

    Linjama, M., Scheidl, R. & Schmidt, S., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 226, I6, p. 726-727

    Research output: Contribution to journalArticleScientific

  53. Published

    Displacement controlled hydraulic systems

    Ahola, V., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). Espoo, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  54. Published

    Displacement controlled machines

    Ahola, V., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 124-131 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  55. Published

    Displacement control of a mobile crane using a digital hydraulic power management system

    Heikkilä, M. & Linjama, M., 2013, In : Mechatronics. 23, 4, p. 452-461 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  56. Published

    Disrupted flow sensing impairs hydrodynamic performance and increases the metabolic cost of swimming in the yellowtail kingfish, Seriola Lalandi

    Yanase, K., Herbert, N. A. & Montgomery, J. C., 2012, In : Journal of Experimental Biology. 215, 22, p. 3944-3954

    Research output: Contribution to journalArticleScientificpeer-review

  57. Published

    Divertor cassette locking system remote handling trials with WHMAN at DTP2

    Lyytikäinen, V., Kinnunen, P., Koivumäki, J., Mattila, J., Siuko, M., Esque, S. & Palmer, J., 2013, In : Fusion Engineering and Design. 88, 9-10, p. 2181-2185 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  58. Published

    Divertor RH design updates and DTP2 Phase 2 testing

    Siuko, M., Järvenpää, J. & Mattila, J., 2011, Espoo: VTT. 6 p. (VTT Publications; vol. 764)

    Research output: Book/ReportCommissioned reportProfessional

  59. Published

    Divertor RH design updates and DTP2 Phase 2 testing

    Siuko, M., Järvenpää, J. & Mattila, J., 2012, VALTION TEKNILLINEN TUTKIMUSKESKUS. 8 p. (VTT Science; vol. 7)

    Research output: Book/ReportCommissioned reportProfessional

  60. Published

    Domain ontologies for reasoning machines in factory automation

    Martinez Lastra, J. L., Delamer, I. M. & Ubis, F., 2010, USA: International Society of Automation (ISA). 138 p.

    Research output: Book/ReportBookProfessional

  61. Published

    Driving feel generation of the mobile machine simulator with the water hydraulic 6-DOF motion platform

    Rokala, M., Sairiala, H. & Koskinen, K. T., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  62. Published

    DSM made easy

    Halonen, N., Juuti, T. & Luostarinen, P., 2012, The 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Dorian, M., Mario, S., Neven, P. & Nenad, B. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, p. 1445-1454 (International Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  63. Published

    DTP2 control room operator and remote handing operation designer responsibilities and information available to them

    Aha, L., Salminen, K., Hahto, A., Saarinen, H., Mattila, J., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2078-2081

    Research output: Contribution to journalArticleScientificpeer-review

  64. Published

    Durability study on high speed water hydraulic miniature on/off-valve

    Paloniitty, M., 24 May 2016, DFP16, Proceedings of the eighth workshop on digital fluid power, May 24-25, 2016, Tampere, Finland. Tampere, p. 201-211 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  65. Published

    Dynamic Fracture and Fragmentation of Heat Shocked Granites

    Hokka, M., Mardoukhi, A. & Kuokkala, V-T., 2017, 14th International conference of Fracture: Proceedings of ICF 14. Rhodes, Greece

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  66. Published

    Dynamic Modeling and Simulation of a Cylindrical Grinder in Presence of Non-linear Friction Effect

    Kalbasi Shirvani, H., Järvenpää, V-M. & Yuan, L., 2013, Proceedings in Research Conference in Technical Disciplines, RCITD 2013, 18.-22. November 2013, Slovak Republic. Mokrys, M., Badura, S. & Lieskovsky, A. (eds.). Zilina: EDIS, p. 47-52 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  67. Published

    Dynamic modelling and fault analysis of wear evolution in rolling bearings

    El-Thalji, I., 26 May 2016, VTT. 80 p. (VTT Science; vol. 127)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  68. Published

    Dynamic operation environment - towards intelligent adaptive production systems

    Järvenpää, E., Luostarinen, P., Lanz, M., Garcia, F. & Tuokko, R., 2011, IEEE International Symposium on Assembly and Manufacturing, ISAM 2011, 25-27 May, 2011, Tampere Hall, Tampere, Finland. Piscataway, NJ: IEEE, p. 1-6 6 p. (IEEE International Symposium on Assembly and Manufacturing ISAM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  69. Published

    Dynamic simulation of dependability of nickel reduction plant

    Penttilä, J. & Ikonen, V., 2013, Proceedings fo the ASEM 2013 International Mechanical Engineering Congress and Exposition, IMECE 2013, November 15-21, 2013, San Diego, California, USA. ASME, p. 1-7 7 p. 64308. (ASME International Mechanical Engineerig Congress and Exposition).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  70. Published

    Dynamics of a True Moving Bed separation process: Linear model identification and advanced process control

    Nogueira, I. B. R., Ribeiro, A. M., Martins, M. A. F., Rodrigues, A. E., Koivisto, H. & Loureiro, J. M., 30 Jun 2017, In : Journal of Chromatography A. 1504

    Research output: Contribution to journalArticleScientificpeer-review

  71. Published

    Dynamics of ice milling and breaking during arctic ship steering operations

    Keskinen, E., Montonen, J., Sharma, N. & Cotsaftis, M., 2014, Proceedings of the ASME 2014, 12th Biennial Conference on Engineering Systems Design and Analysis, ESDA2014, June 25-27, 2014, Copenhagen, Denmark. The American Society of Mechanical Engineers ASME, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  72. Published

    Dynamics of single-hit pneumatic test drill for pulse-shaping analysis of impacting waves

    Montonen, J., Keskinen, E., Cotsaftis, M., Miettinen, J. & Seemann, W., 2013, Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition, IMECE2013, November 15-21, 2013, San Diego, California, USA. ASME, p. 1-7 7 p. 64835. (ASME International Mechanical Engineerig Congress and Exposition).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  73. Published

    Dynamics of Stress Wave Propagation during Percussive Drilling Process

    Keskinen, E., Karvinen, T., Montonen, J. & Heinonen, M., 2011, 13th World Congress in Mechanism and Machine Science, Guanajuato, Mexico, 19-25 June, 2011. Guanajuato: Universidad de Guanajuato, p. 1-5 5 p. (World Congress in Mechanism and Machine Science).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  74. Published

    Dynamics of wire-driven machine mechanisms: Literature review

    Karvinen, T. & Keskinen, E., 2010, Dynamical Systems: Discontinuity, Stochasticity abd Time-Delay. Luo Albert, C. J. (ed.). p. 285-298

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  75. Published

    Dynamics of wire-driven machine mechanisms, Part II: Theory and applications

    Keskinen, E., Karvinen, T. & Montonen, J., 2010, Dynamical Systems: Discontinuity, Stochasticity abd Time-Delay. Luo Albert, C. J. (ed.). p. 299-317

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  76. Published

    Early design verification of ITER remote handling systems using Digital Mock-Ups within simulation lifecycle environment

    Sibois, R., Määttä, T., Siuko, M. & Mattila, J., 2013, 2013 IEEE 25th Symposium on Fusion Engineering, SOFE 2013, San Francisco, CA, USA, 10.-14.6.2013. Institute of Electrical and Electronics Engineers IEEE, p. 1-6 6 p. (IEEE Symposium on Fusion Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  77. Published

    Early phase concept evaluation

    Vanhatalo, M., Pakkanen, J., Lehtonen, T., Riitahuhta, A. & Juuti, T., 2010, NordDesign 2010 Conference, 25-27 August, 2010, Göteborg, Sweden. Dagman, A. & Söderberg, R. (eds.). p. 10 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  78. Published

    Early stage design of a spherical underwater robotic vehicle

    Zavari, S., Heininen, A., Aaltonen, J. & Koskinen, K. T., 19 Dec 2016, 2016 20th International Conference on System Theory, Control and Computing (ICSTCC). IEEE, p. 240-244 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  79. Published

    Easurement of solids velocity and concentration in a large cold CFB model

    Peltola, J., Karvonen, L., Elfvengren, J., Kolehmainen, J., Kallio, S., Pallares, D. & Johnsson, F., 2014, CFB-11: Proceedings of the 11th International Conference on Fluidized Bed Technology, Beijing, China, 14-17 May 2014. p. 589-594

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  80. Published

    Economic analysis of hydrogen production by methane thermal decomposition: Comparison to competing technologies

    Keipi, T., Tolvanen, H. & Konttinen, J., 1 Mar 2018, In : Energy Conversion and Management. 159, p. 264-273 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  81. Published

    Ecosystem oriented energy management: an implementation

    Florea, A., Postelnicu, C., Zhang, B. & Martinez Lastra, J. L., 2012, Proceedings of 2012 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2012, October 14-17 2012, COEX, Seoul, Korea. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 912-918 (IEEE International Conference on Systems, Man, and Cybernetics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  82. Published

    Editorial of special issue Telerobotics and systems engineering for scientific facilities

    Ferre, M. (ed.), Mattila, J. (ed.), Siciliano, B. (ed.) & Bonnal, P. (ed.), 2014, InTech Open Access Publisher. 1 p. (International journal of advanced robotic systems; vol. 11)

    Research output: Book/ReportAnthologyScientificpeer-review

  83. Published

    Edwards-Venn diagrams for knowledge representation and reasoning in industrial systems

    Dvoryanchikova, A., Lobov, A., Capanji, A. & Martinez Lastra, J. L., 2010, 15th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2010, September 13-16, 2010, Bilbao, Spain. p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  84. Published

    EFDA goal oriented training in remote handling - GOTRH

    Mattila, J., Alho, P., Väyrynen, J., Sibois, R. & Salminen, K., 2012, VALTION TEKNILLINEN TUTKIMUSKESKUS. 3 p. (VTT Science; vol. 7)

    Research output: Book/ReportCommissioned reportProfessional

  85. Published

    EFDA quality assurance exercise

    Mattila, J. & Järvenpää, J., 2008, Espoo: VTT. 2 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  86. Published

    Effect of asymmetric heat transfer on glass deformations

    Aronen, A., 2010, Conference on Architectural and Structural Applications of Glass Faculty of Architecture, Challenging Glass 2, Delft University of Technology, 20-21 May 2010, the Netherlands. Bos, F., Louter, C. & Veer, F. (eds.). p. 279-285

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  87. Published

    Effect of glass temperature before cooling and cooling rate on residual stresses in tempering

    Aronen, A. & Karvinen, R., Mar 2018, In : Glass Structures Engineering. 3, 1, p. 3-15

    Research output: Contribution to journalArticleScientificpeer-review

  88. Published

    Effect of heat transfer on glass quality in tempering

    Karvinen, R. & Mikkonen, A., 2015, GPD Glass Performance Days Finland 2015: Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  89. Published

    Effect of humidity on triboelectric charging in a vertically vibrated granular bed: Experiments and modeling

    Kolehmainen, J., Sippola, P., Raitanen, O., Ozel, A., Boyce, C. M., Saarenrinne, P. & Sundaresan, S., 2017, In : Chemical Engineering Science. 173, p. 363-373 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  90. Published

    Effect of natural convection and radiation inside of a hollow beam in a standard fire

    Välikangas, T., Pajunen, S., Baczkiewicz, J., Singh, S. & Sørensen, K., 27 Sep 2017, Proceedings of the 58th Conference on Simulation and Modelling (SIMS 58) Reykjavik, Iceland, September 25th – 27th, 2017. Jonsson, M. T. (ed.). Linköping: Linköping University Electronic Press, Vol. 138. p. 121-127 7 p. 16. (Linköping Electronic Conference Proceedings; no. 138).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  91. Published

    Effect of oil viscosity on filter performance in lubrication oil system

    Heiskanen, V., Mäkelä, T., Kapanen, P. & Rinkinen, J., 2012, Proceedings of the 11th World Filtration Congress & Exhibition, WFC11, April 16-20, 2012, Graz, Austria. Vienna, Austria: Gesellschaft Österreichischer Chemiker GÖCH, p. 1-15 15 p. (World Filtration Congress).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  92. Published

    Effect of parameter uncertainty on reliability of hydraulic transmission system simulation

    Ellman, A., Kajaste, J., Kauranne, H. & Pietola, M., 2005, Proceedings of IMECE 2005, 2005 ASME International Mechanical Engineering Congress and Exposition, November 5-11, 2005, Orlando, Florida USA. p. 7 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  93. Published

    Effect of start-up schemes and amplitude of tangential motion on friction behavior in fretting point contact

    Hintikka, J., Lehtovaara, A. & Lönnqvist, C., 2011, In : Tribology International. 44, 11, p. 1535-1543

    Research output: Contribution to journalArticleScientificpeer-review

  94. Published

    Effect of Temperature on Fume Formation and Deposition in Kraft Recovery Boilers - a Modeling Approach

    Leppänen, A., Tran, H., Välimäki, E. & Oksanen, A., 2014, 2014 International Chemical Recovery Conference, Proceedings - Volume 2. Nieminen, M. & Lampinen, P. (eds.). Suomen Soodakattilayhdistys, The Finnish Recovery Boiler Committee; TAPPI, p. 38-47 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  95. Published

    Effect of the Immersion Level of a Virtual Loader Simulator on the Sense of Presence

    Kuusisto, J., Ellman, A., Kaapu, T. & Tiainen, T., 2011, ASME 2011 World Conference on Innovative Virtual Reality WINVR2011, June 27-29, 2011, Milan, Italy. New York, NY: ASME, (ASME World Conference on Innovative Virtual RealityWINVR).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  96. Published

    Effects of adiabatic heating estimated from tensile tests with continuous heating

    Vazquez Fernandez, N., Isakov, M., Hokka, M. & Kuokkala, V. T., 2018, Dynamic Behavior of Materials - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Springer New York LLC, Vol. 1. p. 1-7 7 p. (Conference Proceedings of the Society for Experimental Mechanics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  97. Published

    Effects of strain and strain rate on the abrasive wear behavior of high manganese austenitic steel

    Lindroos, M., Kuokkala, V-T., Lehtovaara, A. & Kivikytö-Reponen, P., 2013, In : Key Engineering Materials. 527, p. 211-216 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  98. Published

    Effects of team role assessment in problem based group work learning

    Vanhatalo, M., Lehtonen, T., Hälikkä, A., Pakkanen, J. & Juuti, T., 2011, Design education for creativity and business innovation, proceedings of the 13th International Conference on Engineering and product design education, E&PDE 2011, 8-9 September, 2011, City University of London, UK. Kovacevic, A., Ion, W., McMahon, C., Buck, L. & Hogarth, P. (eds.). London: City University, p. 193-198 (International Conference on Engineering and Product Design Education E&PDE).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  99. Published

    Elastodynamic Response of Thin Circular Cylindrical Shells to Grinding Loads

    Dospel, V., 2011, Tampere: Tampere University of Technology. (Tampereen teknillinen yliopisto. Julkaisu; vol. 1014)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  100. Published

    Elävien kuvien linja-auto

    Lehtonen, T., 2010, Peltitähdet - Auto elokuvissa. Levä, K. (ed.). Kerava: Mobilia säätiö, p. 83-94

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

Previous 1 2 3 4 5 6 7 8 ...13 Next
Download list To download, please limit the number of search results to 1,000 or less.