Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    Linja-autoliikennöitsijät ja tavaralinjaliikenne

    Lehtonen, T., 2011, Yölinjalla. Levä, K. (ed.). Mobilia, p. 58-65

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  2. Published

    Local compression behaviour of moist wood at quasi static state

    Björkqvist, T., Moilanen, C., Saarenrinne, P., Koivisto, J., Miksic, A., Alava, M., Salminen, L. & Engberg, B. A., 2013, 8th International Fundamental Mechanical Pulp Research Seminar, 29 - 31 January, 2013, Åre, Sweden. p. 47-48 2 p. (International Fundamental Mechanical Pulp Research Seminar).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  3. Published

    Local compression behaviour of pre-fatigued and chemically pre-treated wood at high strain rate and high temperature

    Moilanen, C., Engberg, B. A. K., Björkqvist, T., Salminen, L. & Saarenrinne, P., 2014, International Mechanical Pulping Conference, IMPC 2014, 2-5 June 2014, Helsinki, Finland, PULPAPER 2014, 3-5 June, 2014, Helsinki, Finland. AEL, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Local oscillation of the boundary layer over the surface of swimming rainbow trout: implications for active drag reduction

    Saarenrinne, P. & Yanase, K., 15 Sep 2015, Proceedings of the 11TH International Symposium on Particle Image Velocimetry – PIV15 . 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  5. Published

    Logical and semantical foundations for knowledge representation for assembly and manufacturing processes

    Lanz, M. & Tuokko, R., 2010, Proceeding of Post-Graduate Workshop on Intelligent Machines and Transport Systems, 3-7 May 2010, CERN, Switzerland. p. 98-109 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  6. Published

    Logical and semantic foundations of knowledge representation for assembly and manufacturing processes

    Lanz, M., 6 Jul 2010, Tampere: Tampere University of Technology. 138 p. (Tampere University of Technology. Publication; vol. 903)

    Research output: Book/ReportDoctoral thesisMonograph

  7. Published

    Low-fidelity design analysis tool for early design phase

    Ellman, A., 10 Oct 2016, Proceedings of the 1st Annual SMACC Research Seminar 2016. p. 90-93 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  8. Published

    Low level control system architecture for autonomous wheel loader

    Ahopelto, M., Uusisalo, J. & Huhtala, K., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 365-376 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Low temperature nanoparticle sintering with continuous wave and pulse lasers

    Kumpulainen, T., Pekkanen, J., Valkama, J., Laakso, J., Tuokko, R. & Mäntysalo, M., 2011, In : Optics and laser technology. 43, 3, p. 570-576

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    M1-teknologialla voidaan rakentaa virtuaalisia oppimisympäristöjä ja konelaboratorioita

    Koskinen, K. T., Leino, T., Palonen, T. & Ranta, P., 2010, In : Fluid Finland. 2/2010, p. 18-20

    Research output: Contribution to journalArticleScientific

  11. Published

    Magnetomechanical coupled FE simulations of rotating electrical machines

    Belahcen, A., Fonteyn, K., Kouhia, R., Rasilo, P. & Arkkio, A., 2013, In : COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 32, 5, p. 1484-1499 16 p., 17095978.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Magnetomechanical Coupled FE Simulations of Rotating Electrical Machines

    Belahceen, A., Fonteyn, K., Kouhia, R., Rasilo, P. & Arkkio, A., 2012, 15th International IGTE Symposium on Numerical Field Calculations in Electrical Engineering, 16-19.2012, Graz, Austria. Institut für Grundlagen und Theorie der Elektrotechnik - IGTE, Technische Universität Graz, Austria, p. 1-6 6 p. (International IGTE Symposium on Numerical Field Calculations in Electrical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  13. Published

    Maintaining a dynamic view of semantic web services representing factory automation systems

    Puttonen, J., Lobov, A. & Martinez Lastra, J. L., 2013, IEEE 20th International Conference on Web Services June 27-July 2, 2013, Santa Clara Marriott, CA, USA. O´Connor, L. (ed.). Los Alamitos, CA: Institute of Electrical and Electronics Engineers, p. 419-426 8 p. (IEEE international conference on web services).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Major achievements and future visions in the Finnish micro and desktop factory research

    Tuokko, R. & Nurmi, A., 2011, Proceedings of the 8th International Conference on Multi-Material Micro Manufacture, 4M 2011, 8-10 November, 2011, Suttgart, Germany. Kück, H., Reinecke, H. & Dimov, S. (eds.). Singapore: Research Publishing, p. 16-26 (International Conference on Multi-Material Micro Manufacture).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Managing high variety products in global value systems

    Pulkkinen, A., Riitahuhta, A., Leino, S-P., Lappeteläinen, I., Heikkilä, M. & Kohtamäki, M., 2010, The 7th International Conference on Product Lifecycle Management, PLM 10, 12-14 July, 2010, BIBA University of Bremen, Germany. Bremen: BIBA-Bremen Institut Für Produktion und Logistik GmbH, p. 13 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  16. Published

    Manufacturing sustainability: a comparison of Indian and Finnish manufacturers' vision and current state

    Shankar, K., Koho, M., Wan, H., Torvinen, S. & Chen, F. F., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Production Engineering, p. 491-498 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    MANUFUTURE 2006 -konferenssi Tampereella haki ratkaisuja Euroopan valmistavan teollisuuden tulevaisuuteen

    Tuokko, R., 2007, In : Sisua! - Tekesin SISU 2010 -teknologiaohjelman tiedotuslehti. 1, p. 8-9

    Research output: Contribution to journalArticleProfessional

  18. Published

    Mapping of stress raising in laser clad components depending on geometry and defects

    Kaplan, F. H., Alam, M. M., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkala, T., Peltola, T. & Barsoum, Z., 2014, 67the IIW Annual Assembly & International Conference, 13th-18th July, 2014 Sheraton Grande Walkerhill & W Seoul Walkerhill, Seoul, Korea. Doc.IV-1174-14. p. 1-14

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  19. Published

    Mass balance control of crushing circuits

    Itävuo, P., Hulthén, E., Yahyaei, M. & Vilkko, M., May 2019, In : Minerals Engineering. 135, p. 37-47 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Matkaraportti: Digitaalihydrauliikan seminaari marraskuisessa Linzissä

    Linjama, M., 2010, In : Fluid Finland. 1/2010, p. 12-14

    Research output: Contribution to journalArticleScientific

  21. Published

    Matrix-based conflict resolution algorithm: applicaton to path selection in PN-based scheduling search

    Popescu, C. & Martinez Lastra, J. L., 2010, 15th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2010, September 13-16, 2010, Bilbao, Spain. p. 4 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    MDM for assessing product variety and production concepts

    Pulkkinen, A., Kuusela, J., Huhtala, P. & Riitahuhta, A., 2012, Proceedings of the 9th International Symposium on Tools and Methods of Competitive Engineering, TMCE 2012, 7-11 May, 2012, Karlsruhe, Germany. Imre, H., Zoltan, R., Albert, A. & Mathias, B. (eds.). Delft, Netherlands: Delft University of Technology, p. 553-562 (International Symposium on Tools and Methods of Competitive Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Measured characteristics of an in-line pump with independently controlled pistons

    Tammisto, J., Huova, M., Heikkilä, M., Linjama, M. & Huhtala, K., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Measuring and Modelling Hydraulic Fluid Dynamics at High Pressure - Accurate and Simple Approach

    Karjalainen, J-P., Karjalainen, R. & Huhtala, K., 2012, In : International Journal of Fluid Power. 13, 2, p. 51-59

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Mechanical analysis of a pneumatically actuated concentric double-shell structure for cell stretching

    Zhao, F., Kreutzer, J., Pajunen, S. & Kallio, P., 2014, In : Micromachines. 5, 4, p. 868-885 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Mechanical Glass Tempering - Present Products and Future Challenges

    Aronen, A. & Karvinen, R., 2011, GPD Glass Performance Days 2011, 12th International Conference on Architectural and Automotive Glass, 17-20 June 2011, Tampere, Finland. Vitkala, J. (ed.). Tampere: International Conference on Architectural and Automotive Glass, p. 122-125 (International Conference on Architectural and Automotive Glass GPD Glass Performance Days).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  27. Published

    Mechanical subsystems integration and structural analysis for the autonomous underwater explorer

    Villa, J., Heininen, A., Zavari, S., Salomaa, T., Usenius, O., Laitinen, J., Aaltonen, J. & Koskinen, K. T., 2018, 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). IEEE, p. 1488-1493

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Mechatronic Architecture Development of UX-1

    Zavari, S., Usenius, O., Salomaa, T., Villa Escusol, J., Heininen, A., Aaltonen, J. & Koskinen, K., 2017, ICCAS 2017 Proceedings. Institute of Control, Robotics and Systems, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Mechatronic design of a four wheel steering mobile robot with fault-tolerant odometry feedback

    Oftadeh, R., Aref, M. M., Ghabcheloo, R. & Mattila, J., 2013, The 6th IFAC Symposium on Mechatronic Systems, IFAC MECH2013, April 10-12, 2013, Zhejiang University, Hangzhou, China. p. 663-669 7 p. (Elsevier IFAC Publications / IFAC Proceedings series).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Mechatronic design of digital hydraulic micro valve package

    Linjama, M., Paloniitty, M., Tiainen, L. & Huhtala, K., 2014, The Second International Conference on Dynamics and Vibroacoustics of Machines, September 15-17, 2014, Samara, Russia. p. 610-617 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    MEMS-based motion state estimation and control of hydraulic manipulators

    Honkakorpi, J., 27 Jun 2014, Tampere: Tampere University of Technology. 91 p. (Tampere University of Techology. Publication; vol. 1219)

    Research output: Book/ReportDoctoral thesisMonograph

  32. Published

    MEMS-based State Feedback Control of Multi-Body Hydraulic Manipulator

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), November 3-7, 2013, Tokyo, Japan. Institute of Electrical and Electronics Engineers IEEE, p. 4419-4425 7 p. (IEEE/RSJ International Conference on Intelligent Robots and Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Mems Sensor Module for Hydraulic Boom State Feeedback Control

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 393-404 (Scandinavian International Conference on Fluid Power SICFP).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Mems sensor network based anti-sway control system for articulated hydraulic crane

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2013, Proceedings of ASME/BATH 2013 Symposium on Fluid Power and Motion Control, FPMC2013, October 6-9, 2013, Sarasota, Florida. p. 1-9 9 p. (Symposium on Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Method and an Apparatus for Producing Nanocellulose

    Björkqvist, T., Gustafsson, H., Koskinen, T., Nuopponen, M., Vehniäinen, A. & Gustafsson, S., 3 Feb 2015, IPC No. D21B 1/ 12 A I, Patent No. US8945346, Priority date 31 Dec 2010, Priority No. FI 20106402

    Research output: PatentScientific

  36. Published

    Method and apparatus for cooling material by atomised spray

    Ahonen, S., Karvinen, R. & Vainio, T., 31 Dec 2014, IPC No. C03B 27/ 02 A I, Patent No. CN102803520, Priority date 15 Jun 2010, Priority No. WO2010FI50499

    Research output: PatentScientific

  37. Method and apparatus for mechanical defibration of wood

    Lukander, M., Björkqvist, T. & Tuovinen, O., 2014, Patent No. Pat. CA 2608207 C, Priority date 25 Mar 2014, Priority No. 2005//06/03 US 60/686,919 : 686919

    Research output: PatentScientific

  38. Published

    Method for analysing planar machine tool measurements

    Hölsä, J., 1999, Tampere: Tampere University of Technology. (Tampereen teknillinen korkeakoulu. Julkaisuja; vol. 280)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  39. Published

    Method for automatic testing of control systems

    Kolu, A., Mantere, P., Vallas, A., Hyvönen, M. & Multanen, P., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 111-127 17 p. (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Method for determining uncertainty of specified coordinate measurement

    Tikka, H., 1992, Tampere: Tampere University of Technology. (Tampereen teknillinen korkeakoulu. Julkaisuja; vol. 100)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  41. Published

    Method for evaluating the value of technology in the manufacturing industry

    Mämmelä, J., Juuti, T., Julkunen, P., Lemmetty, P. & Pakkanen, J., 2020, The 13th World Congress on Engineering assets and public infrastructures in the age of digitalization, WCEAM: 24th-26th September 2018, Stavanger, Norway.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Method for Modelling Strategic Capabilities in Small and Medium Sized Enterprises

    Halme, J., Majuri, M., Nylund, H., Kopra, M-J. & Tuokko, R., 2015, Proceedings of the 25th international conference on flexible automation and intelligent manufacturing : FAIM2015, 23rd-26th June, 2015 Wolverhampton, UK. Vol. Vol. 2. p. 132-139 8 p. 130

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Methodology for evaluating the production accuracy of machine tools

    Andersson, P. H., 1992, Tampere: Tampere University of Technology. 121 p. (Tampereen teknillinen korkeakoulu. Julkaisuja; vol. 102)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  44. Published

    Methodology for implementing universal gripping solution for robot application

    Azim, M. S., Lobov, A. & Pastukhov, A., 2019, In : Proceedings of the Estonian Academy of Sciences. 68, 4, p. 413-420 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Published

    Methods to design optimum heat sink geometries

    Karvinen, R. & Lampio, K., 10 Aug 2018, International Heat Transfer Conference, IHTC-16, August 10-15, 2018, Beijing, China. p. 5041-5048 8 p. IHTC16-23247

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Methods to reduce the CO2 concentration of educational buildings utilizing internal ventilation by transferred air

    Kalema, T. & Viot, M., 2013, In : Indoor Air. p. 1-10 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Method to determine internal leakage of aircraft's hydraulic servo

    Laitinen, J. & Koskinen, K., 2018, 12th World Congress on Engineering Asset Management & 13th International Conference on Vibration Engineering and Technology of Machinery: (WCEAM 2017) 2-4, August 2017, Brisbane, Australia.. Mathew, J., Lim, C. W., Ma, L., Sands, D., Cholette, M. E. & Borghesani, P. (eds.). Springer, p. 343-349 7 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Metviro

    Kortemaa, A., Mäkelä, T., Punki, J., Ranta, P., Palonen, T., Leino, T. & Koskinen, K. T., 2009

    Research output: Artistic and non-textual formSoftwareScientific

  49. Published

    Micro and desktop factories for micro/meso-scale manufacturing applications and future visions

    Tuokko, R., Järvenpää, E., Heikkilä, R. & Nurmi, A., 2013, In : Applied Mechanics and Materials. 289, 2, p. 1-12 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    Micro and Desktop Factory Roadmap

    Tuokko, R., Heikkilä, R., Järvenpää, E., Nurmi, A., Prusi, T., Siltala, N. & Vuola, A., 2012, Tampere: Tampere University of Technology. Department of Production Engineering. 112 p.

    Research output: Book/ReportCommissioned reportProfessional

  51. Published

    Micro-electromechanical System Sensors in Unscented Kalman Filter-based Condition Monitoring of Hydraulic Systems

    Nurmi, J., Honkakorpi, J., Vihonen, J. & Mattila, J., 2013, 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, July 9-12, 2013, Wollongong, Australia, AIM 2013 Conference Digest, Mechatronics for Human Wellbeing. IEEE; ASME, p. 354-361 (IEEE/ASME International Conference on Advanced Intelligent Mechatronics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  52. Published

    Micro-factories

    Järvenpää, E., Heikkilä, R., Siltala, N., Prusi, T. & Tuokko, R., 2015, Micromanufacturing Engineering and Technology. 2 ed. Elsevier, p. 549-579

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  53. Published

    Microfactory concept for highly flexible volume assembly of watch mechanisms

    Järvenpää, E., Heikkilä, R. & Tuokko, R., 2010, Proceedings of the 7th International Workshop on Microfactories, IWMF 2010, 24-27 October, 2010, Daejeon, Korea. p. 9-14

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  54. Published

    Micro H-scara robot: findings and results

    Vuola, A., Siltala, N., Heikkilä, R. & Tuokko, R., 2010, Proceedings of the 7th International Workshop on Microfactories, IWMF 2010, 24-27 October, 2010, Daejeon, Korea. p. 20-24

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  55. Published

    Micro Manufacturing Unit and the Corresponding 3D-Model for the Digital Twin

    Lohtander, M., Garcia, E., Lanz, M., Volotinen, J., Ratava, J. & Kaakkunen, J., 2018, In : Procedia Manufacturing. 17, p. 55-61

    Research output: Contribution to journalArticleScientificpeer-review

  56. Published

    Microstructure and wear resistance of the laser hardened PM tool steel vanadis 6

    Surzhenkov, A., Kulu, P., Viljus, M., Vallikivi, A. & Latokartano, J., 2010, Proceedings of the 7th International Conference of DAAAM Baltic Industrial Engineering, 22-24 April, 2010, Tallinn, Estonia. Kyttner, R. (ed.). Tallinn University of Technology, p. 486-491

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  57. Published

    Microstructure-property relationships of novel ultra-high strength press hardening steels

    Järvinen, H., Honkanen, M., Oja, O., Järvenpää, M. & Peura, P., 2019, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50, 2, p. 816-836 21 p.

    Research output: Contribution to journalArticleScientificpeer-review

  58. Published

    Mikro- ja Desktop-tuotantojärjestelmät

    Heikkilä, R., Vuola, A., Prusi, T., Siltala, N. & Tuokko, R., 2011, Automaatio XIX Seminaari, 15-16.3.2011, Helsinki. SAS julkaisusarja. Visala, A. (ed.). Helsinki: Suomen Automaatioseura, p. 1-6 6 p. (Automaatio Seminaari; vol. 41).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  59. Published

    Miniaturization of flexible screwing cell

    Vuola, A., Heikkilä, R., Prusi, T., Remes, M., Rokka, P., Siltala, N. & Tuokko, R., 2010, Proceedings of 5th IFIP WG 5.5, International Precision Assembly Seminar, IPAS 2010, 14-17 February, 2010, Chamonix, France. Ratchev, S. (ed.). p. 309-316

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  60. Published

    Miniaturized camera systems for microfactories

    Prusi, T., Rokka, P. & Tuokko, R., 2010, Proceedings of 5th IFIP WG 5.5, International Precision Assembly Seminar, IPAS 2010, 14-17 February, 2010, Chamonix, France. Ratchev, S. (ed.). p. 115-122

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  61. Published

    Minimizing the Maximum Curvature of Quadratic Bezier Curves with a Tetragonal Concave Polygonal Boundary Constraint

    Choi, J., Curry, R. E. & Elkaim, G. H., 2011, In : Computer-Aided Design. 44, 4, p. 1-22 22 p.

    Research output: Contribution to journalArticleScientificpeer-review

  62. Published

    Mittaustuloksia kaupallisilla puhtaustestikaapeilla

    Kuosku, M., Pekkonen, J. & Rinkinen, J., 2012, KompuNW -verkostoseminaari TTY:ssa 9.10.2012. Tampere: Tampere University of Technology, IHA - Department of Intelligent Hydraulics and Automation, p. 1-15 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  63. Published

    Mixed Variable Formulations for Truss Topology Optimization

    Mela, K., 2013, Tampere: Tampere University of Technology. 132 p. (Tampere University of Technology. Publication; no. 1134)

    Research output: Book/ReportDoctoral thesisMonograph

  64. Published

    Mobile robotic spatial odometry by low-cost IMUs: (Inertial Measurement Unit Sensors)

    Zhang, X., Mononen, T., M. Aref, M. & Mattila, J., 30 Aug 2018, 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications (MESA): Oulu, July 2-4, 2018.. Oulu: IEEE, 6 p. 8449209

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  65. Published

    Model-based control of a pressure-compensated directional valve with significant dead-zone

    Lampinen, S., Koivumäki, J., Mattila, J. & Jouni, N., 7 Oct 2019, ASME/BATH 2019 Symposium on Fluid Power and Motion Control: October 7–9, 2019 Longboat Key, Florida, USA . ASME

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  66. Published

    Model-based design of power-split drivelines

    Erkkilä, M., Huhtala, K., Vilenius, M. & Virvalo, T., 2009, Agricultural Engineering Conference 2009, 6.-7.11.2009, Hannover, Germany. VDI-Berichte. p. 327-332

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  67. Published

    Model-based development in the domain of mobile machines

    Jouppila, V., Kaapu, T., Sjöstedt, C-J., Ellman, A. & Chen, D-J., 2014, Digital proceedings of the tenth International Symposium on Tools and Methods of Competitive Engineering - TMCE 2014, May 19-23, Budapest, Hungary. Horvath, I. & Rusak, Z. (eds.). Delft: Delft University of Technology, p. 759-772 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  68. Published

    Model-based force and position tracking control of a multi-pressure hydraulic cylinder

    Linjama, M. & Huova, M., Jan 2018, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 232, 3, p. 324-335

    Research output: Contribution to journalArticleScientificpeer-review

  69. Published

    Model-based force and position tracking control of an asymmetric cylinder with a digital hydraulic valve

    Linjama, M., Huova, M. & Huhtala, K., 1 Sep 2016, In : International Journal of Fluid Power. 17, 3, p. 163-172

    Research output: Contribution to journalArticleScientificpeer-review

  70. Published

    Model-based pressure control with digital valve system

    Linjama, M. & Lahtinen, J., 2011, The Fourth Workshop on Digital Fluid Power, 21st-22nd November, 2011, Linz, Austria. Linz: DFP-Workshops, p. 26-38 (Workshop on Digital Fluid Power; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  71. Published

    Modeling and control of a pneumatic muscle actuator

    Jouppila, V., 4 Apr 2014, Tampere: Tampere University of Technology. 95 p. (Tampere University of Technology. Publication; vol. 1199)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  72. Published

    Modeling and Experimental Characterization of Pressure Drop in Gravity-Driven Microfluidic Systems

    Mäki, A-J., Hemmilä, S., Hirvonen, J., Narra Girish, N., Kreutzer, J., Hyttinen, J. & Kallio, P., 1 Feb 2015, In : Journal of Fluids Engineering: Transactions of the ASME. 137, 2, p. 1-8 8 p., 021105.

    Research output: Contribution to journalArticleScientificpeer-review

  73. Published

    Modeling and identification of a pneumatic muscle actuator system controlled by on/off solenoid valve

    Jouppila, V., Gadsden, A. & Ellman, A., 2010, Proceedings of the 7th International Fluid Power Conference IFK, Aachen, Germany, 22 - 24 March, 2010. p. 1-34 34 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  74. Published

    Modeling and Optimization of Plate Fins and Plate Fin Heat Sinks

    Lindstedt, M., 2013, Tampere: Tampere University of Technology. 70 p. (Tampere University of Technology. Publication)

    Research output: Book/ReportDoctoral thesisMonograph

  75. Published

    Modeling and Preliminary Design of Underwater Robot for Inspection

    Zavari, S., Salomaa, T., Koskinen, K., Villa Escusol, J. & Aaltonen, J., 2016, Proceedings of the 2nd Annual SMACC Research Seminar 2017. Tampere: Tampere University of Technology, p. 81-84 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  76. Published

    Modeling coupled hydraulic-driven multibody systems using finite element method

    Mäkinen, J. M. A., Pertola, P. S. & Marjamäki, H. U., 2010, The 1st Joint International Conference on Multibody System Dynamics, May 25-27, 2010, Lappeenranta, Finland. p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  77. Published

    Modeling Fume Particle Dynamics and Deposition with Alkali Metal Chemistry in Kraft Recovery Boilers

    Leppänen, A., 9 Jan 2015, Tampere: Tampere University of Technology. 63 p. (Tampere University of Technology. Publication; vol. 1273)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  78. Published

    Modeling Future Hadron Colliders’ Availability for Physics

    Niemi, A., 17 Apr 2019, Tampere University. 130 p. (Tampere University Dissertations; vol. 48)

    Research output: Book/ReportDoctoral thesisMonograph

  79. Published

    Modeling of Age-Dependent Failure Tendency from Incomplete Data

    Hagmark, P. & Laitinen, J., 2014, Engineering Asset Management 2011: Proceedings of the Sixth World Congress on Engineering Asset Management. Lee, J., Ni, J., Sarangapani, J. & Mathew, J. (eds.). London: Springer-Verlag London Limited, p. 449-459 11 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  80. Published

    Modeling of closed spare part circulation for better availability of aircraft

    Laitinen, J. & Hagmark, P-E., 2010, Proceedings of the 4th Asia-Pacific International Symposium on Advanced Reliability and Maintenance Modeling APARM 2010, Wellington, New Zealand, 2 - 4 December, 2010. Chukova, S., Haywood, J. & Dohi, T. (eds.). p. 409-416

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  81. Published

    Modeling of deformations and stresses during glass tempering

    Aronen, A. & Karvinen, R., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA. New York, NY: ASME, p. 1-9 9 p. (ASME International Mechanical Engineering Congress and Exposition IMECE2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  82. Published

    Modeling of Fine Particles and Alkali Metal Compounds in Kraft Recovery Boiler Furnace

    Leppänen, A., Välimäki, E. & Oksanen, A., 2011, The 2011 TAPPI PEERS Conference, 2-5 October 2011, Oregon Convention Center in Portland, Oregon USA. Norcross, GA: TAPPI, p. 1-8 8 p. (TAPPI PEERS Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  83. Published

    Modeling of Hysteresis Losses in Ferromagnetic Laminations under Mechanical Stress

    Rasilo, P., Singh, D., Aydin, U., Martin, F., Kouhia, R., Belahcen, A. & Arkkio, A., Mar 2016, In : IEEE Transactions on Magnetics. 52, 3, 4 p., 7300204.

    Research output: Contribution to journalArticleScientificpeer-review

  84. Published

    Modeling of Long-Term Behavior of Glassy Polymers

    Holopainen, S. & Wallin, M., 2013, In : Journal of Engineering Materials and Technology: Transactions of the ASME. 135, 1, 11 p., 011001.

    Research output: Contribution to journalArticleScientificpeer-review

  85. Published

    Modeling of Tangential Vibrations in Cylindrical Grinding Contact with Regenerative Chatter

    Järvenpää, V-M., Yuan, L., Kalbasi Shirvani, H. & Mehmood, F., 2013, Surveillance 7 - International conference, Institute of Technology of Chartres, France, October 29-30, 2013. 10 p. (International Conference Surveillance).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  86. Published

    Modeling of temperature fields and residual stresses in an electron beam welded copper plate

    Leikko, J., Karvinen, R., Taskinen, P. & Salonen, T., 2011, Proceedings of 6th Baltic Heat Transfer Conference - BHTC2011, August 24-26 2011, Tampere Finland. Karvinen, R. & Lindstedt, M. (eds.). Tampere: Tampere University of Technology, p. 1-12 12 p. (Baltic Heat Transfer Conference BHTC).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  87. Published

    Modeling of the mechanical behavior of amorphous glassy polymers under variable loadings and comparison with state-of-the-art model predictions

    Holopainen, S., 2013, In : Mechanics of Materials. 66, p. 35-58 24 p.

    Research output: Contribution to journalArticleScientificpeer-review

  88. Published

    Modeling of the Process Parameters Influencing Cold Metal Transfer (CMT): Development of an Approach Based in Causal Networks

    Välimäki, E., Mokhtarian, H., Vihinen, J. & Coatanea, E., Oct 2016, Proceedings of the 1st Annual SMACC Research Seminar 2016. p. 40-42. p. 56-59 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  89. Published

    Modeling system of systems: a generic method based on system characteristics and interface

    Zhou, B., Dvoryanchikova, A., Lobov, A. & Martinez Lastra, J. L., 2011, IEEE 9th International Conference on Industrial Informatics, INDIN 2011, 26-29 July, 2011, Caparica, Lisbon, Portugal. Piscataway, NJ: IEEE, p. 361-368 (International Conference on Industrial Informatics INDIN).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  90. Published

    Modelling and analysis of fretting wear in rough point contacts in partial slip conditions

    Lehtovaara, A. & Lönnqvist, C., 2011, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 225, 10, p. 986-998

    Research output: Contribution to journalArticleScientificpeer-review

  91. Published

    Modelling and evaluation of the fretting fatigue cracking risk in smooth spherical contacts

    Lehtovaara, A., Rabb, R. & Pasanen, A., 2011, In : Tribology International. 44, 11, p. 1526-1534

    Research output: Contribution to journalArticleScientificpeer-review

  92. Published

    Modelling and Experimental Analysis of Fretting Fatigue in Complete and Bolted Contacts

    Juoksukangas, J., 24 May 2017, Tampere University of Technology. 58 p. (Tampere University of Technology. Publication; vol. 1472)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  93. Published

    Modelling and robust control of a hydraulic servo system

    Zhai, L., Mattila, J. & Virvalo, T., 2010, Proceedings of the Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, CERN, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 156-167

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  94. Published

    Modelling and Robust Control of Hydraulic Manipulators

    Zhai, L., 2012, Tampere: Tampere University of Technology. 98 p. (Tampere University of Technology. Publication; no. 1069)

    Research output: Book/ReportDoctoral thesisMonograph

  95. Published

    Modelling and Simulation of Radial Spruce Compression to Optimize Energy Efficiency in Mechanical Pulping

    Moilanen, C., Björkqvist, T., Ovaska, M., Koivisto, J., Miksic, A., Engberg, B., Salminen, L., Saarenrinne, P. & Alava, M., 26 Sep 2016, 2016 International Mechanical Pulping (IMPC) Conference Proceedings, Monday, September 26 - Wednesday, September 28, Jacksonville, Florida, USA. USA: TAPPI, p. 53-70 18 p. 1.3

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  96. Published

    Modelling Capabilities for Functional Configuration of Part Feeding Equipment

    Hansson, M. N., Järvenpää, E., Siltala, N. & Madsen, O., 18 Sep 2017, In : Procedia Manufacturing. 11, p. 2051-2060 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  97. Published

    Modelling fume deposit growth in recovery boilers: effect of flue gas and deposit temperature

    Leppänen, A., Tran, H., Välimäki, E. & Oksanen, A., 2014, In : Journal of Science and Technology for Forest Products and Processes. 4, 1, p. 50-57 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  98. Published

    Modelling of digital extended enterprise

    Pulkkinen, A., Vainio, V., Anttila, J. P. & Leino, S-P., 17 Oct 2018, 20th International Dependency and Structure Modeling Conference: Oct. 15-17, 2018, Trieste, Italy. Leardi, C., Browning, T. R., Eppinger, R., Steven, D. & Becerril, L. (eds.). The Design Society, p. 139-148 10 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  99. Published

    Modelling of Dynamic Rock Fracture Process with a Rate-Dependent Combined Continuum Damage-Embedded Discontinuity Model Incorporating Microstructure

    Saksala, T., 2016, In : Rock Mechanics and Rock Engineering. 49, p. 3947–3962 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  100. Published

    Modelling of flow characteristics of on/off valves

    Linjama, M., Huova, M. & Karvonen, M., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology, Department of Intelligent Hydraulics and Automation, p. 209-222 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1...4 5 6 7 8 9 10 11 ...13 Next
Download list To download, please limit the number of search results to 1,000 or less.