Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    2008-2009 Host Activities Related to DTP2 Test Facility Operation and Upgrade Preparation

    Siuko, M., Järvenpää, J. & Mattila, J., 2009, VTT. 10 p. (VTT Publications; vol. 709)

    Research output: Book/ReportCommissioned reportProfessional

  2. Published

    2008-2009 Host Activities Related to DTP2 Test Facility Operation and Upgrade Preparation

    Siuko, M., Järvenpää, J. & Mattila, J., 2010, VTT. 12 p. (VTT Publications; vol. 738)

    Research output: Book/ReportCommissioned reportProfessional

  3. Published

    2008-2010 Host Activities Related to DTP2 Test Facility Operation and Upgrade Preparation

    Siuko, M., Järvenpää, J. & Mattila, J., 2011, Valtion teknillinen tutkimuslaitos. 11 p. (VTT Publications; vol. 764)

    Research output: Book/ReportCommissioned reportProfessional

  4. Published

    3D Attitude Calculation for the Grasper of a Crane System with a Rotary Gyroscope

    Zhang, X., Mustalahti, P., Peltola, E. & Mattila, J., Nov 2018, 2018 Ninth International Conference on Intelligent Control and Information Processing (ICICIP). IEEE, p. 229-235 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    3D numerical modelling of bit-rock fracture mechanisms in percussive drilling with a multiple-button bit

    Saksala, T., 2013, In : International Journal for Numerical and Analytical Methods in Geomechanics. 37, 3, p. 309-324

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    3d numerical simulation of rock fracture due to multiple button bit in percussive drilling

    Saksala, T., 2012, Proceedings of the 2012 ISRM International Symposium - EUROCK 2012, Rock Engineering and Technology for Sustainable Underground Construction, 28-30 May Stockholm. International Society for Rock Mechanics ISRM, p. 1-12 12 p. (ISRM International Symposium).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    A builder for adaptable human machine interfaces for mobile devices

    Neira, O., Nieto Lee, A., Martinez Lastra, J. L. & Camp, R. S., 2013, Proceedings 2013 11the IEEE international conference on industrial informatics INDIN, Bochum, Germany, July 29-31, 2013. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 750-755 6 p. (IEEE international conference on industrial informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    A case study of share of ICT infrastructure in energy consumption of discrete manufacturing facility

    Sohail, M., Florea, A. & Martinez Lastra, J. L., 2014, 2014 IEEE 15th Workshop on Control and Modeling for Power Electronics (COMPEL), 22-25 Junen 2014, University of Cantabria, Santander, Spain. Piscataway: The Institute of Electrical and Electronics Engineers IEEE, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    A Case Study on Effects of Remote Control and Control System Distribution in Hydraulic Mobile Machines

    Uusisalo, J., 2011, Tampere: Tampere University of Technology. 111 p. (Tampere University of Technology. Publication; vol. 960)

    Research output: Book/ReportDoctoral thesisMonograph

  10. Published

    Accuracy measurements of miniature robot using optical CMM

    Vuola, A. & Tuokko, R., 2012, Precision assembly technologies and systems. Proceedings of the 6th IFIP WG 5.5 International precision assembly seminar, IPAS 2012, 12-14 February, 2012, Chamonix, France. Svetan, R. (ed.). Heidelberg: Springer, p. 126-133 (IFIP Advances in Information and Communication Technology; vol. 371).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Achieving Benefits with Design Reuse in Manufacturing Industry

    Pakkanen, J., Huhtala, P., Juuti, T. & Lehtonen, T., 9 Aug 2016, 26th CIRP Design Conference. Vol. 50. p. 8-13 6 p. (Procedia CIRP; vol. 50).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Achieving integrated product and production development with knowledge creation and flow model

    Lehtonen, T., Pakkanen, J., Juuti, T., Vanhatalo, M. & Becker, I., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Production Engineering, p. 357-364 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    A co-creation tool in walk-in virtual environment: making prospective work visible

    Tiainen, T., Kaapu, T., Ellman, A. & Kuusisto, J., 2012, Proceedings of the European Conference for Information Systems ECIS 2012, June 10-13, 2012 ESADE, Barcelona, Spain. p. 1-11 11 p. Paper 43. (European Conference on Information Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    A comparison of rheology and FTIR in the study of polypropylene and polystyrene photodegradation

    Mylläri, V., Ruoko, T-P. & Syrjälä, S., 1 Jul 2015, In : Journal of Applied Polymer Science. 132, 28, 6 p., 42246.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    A concept and local implementation for industry-academy collaboration and life-long learning

    Lanz, M., Lobov, A., Katajisto, K. & Mäkelä, P., 23 Apr 2018, In : Procedia Manufacturing. 23, p. 189-194 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    A concept for feature based quality feedback in small batch manufacturing

    Torvinen, S. J., 1992, Tampere: Tampere University of Technology. (Tampereen teknillinen korkeakoulu. Julkaisuja; vol. 103)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  17. Published

    A conceptual design and modeling framework for integrated additive manufacturing

    Mokhtarian, H., Coatanea, E., Paris, H., Mansor Mbow, M., Pourroy, F., René Marin, P., Vihinen, J. & Ellman, A., 28 Apr 2018, In : Journal of Mechanical Design. 140, 8, 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    A conceptual modeling and simulation framework for system Design

    Coatanea, E., Roca, R., Mokhtarian, H., Mokammel, F. & Ikkala, K., 1 Jul 2016, In : Computing in Science and Engineering. 18, 4, p. 42-52

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    A constitutive model for strain-rate dependent ductile-to-brittle transition

    Hartikainen, J., Kolari, K. & Kouhia, R., 2012, Proceedings of the 21st IAHR International Symposium on Ice, Ice Research for Sustainable Environment, Dalian, China, June 11-15, 2012. Zhijun, LI. & Peng, LU. (eds.). Dalian, China: Dalian University of Technology, p. 24-29 (IAHR International Symposium on Ice).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    A Continuum damage model based on Ottosen's four parameter failure criterion for concrete

    Tahaei Yaghoubi, S., Kouhia, R., Hartikainen, J. & Kolari, K., 2014, In : Rakenteiden mekaniikka. 47, 2, p. 50-66 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    A continuum damage model for creep fracture and fatigue analyses

    Kauppila, P., Kouhia, R., Ojanperä, J., Saksala, T. & Sorjonen, T., 2016, 21st European Conference on Fracture, ECF21, 20-24 June 2016, Catania, Italy. p. 887–894 8 p. (Procedia Structural Integrity; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    A Continuum damage model for quasi-brittle materials

    Yaghoubi, S. T., Kouhia, R., Hartikainen, J. & Kolari, K., 2014, Proceedings of NSCM-27: the 27th Mechanics Nordic Seminar on Computational Mechanics. Eriksson, A., Kulachenko, A., Mihaescu, M. & Tibert, G. (eds.). Stockholm: KTH Mechanics, p. 160-163 4 p. (TRITA-MEK Technical report; no. 24).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    A cross-layer approach to energy management in manufacturing

    Florea, A., Garcia Izaguirre Montemayor, J. A., Postelnicu, C. & Martinez Lastra, J. L., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 304-308 (IEEE International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Active vibration control of roll press system by piezoelectric actuators

    Töhönen, M. & Seemann, W., 2010, 81st Annual Meeting of the Gesellschaft für Angewandte Mathematik und Mechanik GAMM, 22.-26. March, 2010, Karlsruhe, Germany. Proceedings in Applied Mathematics and Mechanics. p. 265-266

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Active vibration control of roll press system by piezoelectric actuators

    Töhönen, M., Seemann, W. & Keskinen, E., 2010, Proceedings of The Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, Cern, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 134-144

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Activities and corresponding information flows for production system adaption planning

    Järvenpää, E., Lanz, M., Siltala, N. & Tuokko, R., 2011, Proceedings of the 4th International Swedish Production Symposium, SPS11 3-5 May, 2011, Lund, Sweden. Ståhl, J-E. (ed.). Lund: The Swedish Production Academy, p. 124-133 (International Swedish Production Symposium SPS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Activity report of COST Action TU0905 Working Group 2 – Material characterization and material improvement

    Schneider, J., Karvinen, R., Vandebroek, M. & Savineau, G., 2014, Proceedings volume of the Challenging Glass 4 & COST Action TU0905 Final Conference, 6-7 February 2014 at the EPFL in Lausanne, Switzerland. Louter, C., Bos, F., Belis, J. & Lebet, J-P. (eds.). CRC Press, p. 21-24 4 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  28. Published

    Adaptation of manufacturing systems in dynamic environment based on capability description method

    Järvenpää, E., Luostarinen, P., Lanz, M. & Tuokko, R., 2012, Manufacturing systems. Faieza, A. A. (ed.). Rijeka, Croatia: InTech, p. 93-118

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  29. Published

    Adaptive and nonlinear control of discharge pressure for variable displacement axial piston pumps

    Koivumäki, J. & Mattila, J., 1 Oct 2017, In : Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME. 139, 10, 101008.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    Adaptive dead zone compensation of proportional mobile valve

    Kivelä, T. & Mattila, J., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 411-422 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Adaptive gripper system for small optical assemblies

    Heikkilä, R., Prusi, T., Ha, T. H., Song, J. Y., Lee, C. W. & Tuokko, R., 2010, Proceedings of the 7th International Workshop on Microfactories, IWMF 2010, 24-27 October, 2010, Daejeon, Korea. p. 308-312

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  32. Published

    Additive Manufacturing in Production: A Study Case Applying Technical Requirements: 15th Nordic Laser Materials Processing Conference, Nolamp 15

    Ituarte, I. F., Coatanea, E., Salmi, M., Tuomi, J. & Partanen, J., 2015, In : Physics Procedia. 78, p. 357-366 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    Addressing the myopia problem: a web service-based implementation architecture for a Petri Net-based scheduler

    Popescu, C. & Martinez Lastra, J. L., 2010, 2010 IEEE International Conference on Industrial Technology (ICIT), 14-17 March, 2010, Vina del Mar, Chile. p. 1643-1647

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    A device configuration management tool for context-aware system

    Kuutti, A., Dvoryanchikova, A., Lobov, A., Martinez Lastra, J. L. & Vahtera, T., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 10-15 (IEEE International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Adiabatic Heating of Austenitic Stainless Steels at Different Strain Rates

    Vazquez-Fernandez, N. I., Soares, G. C., Smith, J. L., Seidt, J. D., Isakov, M., Gilat, A., Kuokkala, V. T. & Hokka, M., 20 Jun 2019, In : Journal of Dynamic Behavior of Materials. 5, 3, p. 221-229 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    A distributed balancing method for elastic rolls

    Jokinen, K. & Keskinen, E., 2010, Proceedings ot The Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, Cern, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 52-65

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Advanced analysis of complex signals

    Saramäki, T., 2013, In : Public Service Review. 25, p. 314-315 2 p.

    Research output: Contribution to journalArticleGeneral public

  38. Published

    Advanced concepts for flexible data integration in heterogeneous production environments

    Dennert, A., Garcia Izaguirre Montemayor, J., Krause, J., Hesse, S., Martinez Lastra, J. L. & Wollschlaeger, M., 2013, 11th IFAC Workshop on intelligent manufacturing systems, The international federation of automatic control, May 22-24, 2013. São Paulo, Brazil. Tsuzuki, M. D. S. G. & José, R. (eds.). International Federation of Automatic Control IFAC, p. 348-353 6 p. (Elsevier IFAC Publications / IFAC Proceedings series; vol. 11).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Advanced Fault Tree Analysis for Improved Quality and Risk Assessment

    Penttinen, J-P. & Lehtinen, T., 26 Mar 2016, Proceedings of the 10th World Congress on Engineering Asset Management (WCEAM 2015). Koskinen, K., Kortelainen, H., Aaltonen, J., Uusitalo, T., Komonen, K., Mathew, J. & Laitinen, J. (eds.). Springer International Publishing Switzerland, p. 471-478 8 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Advances in the TUT microfactory concept development

    Heikkilä, R., Järvenpää, E. & Tuokko, R., 2010, In : International Journal of Automation Technology. 4, 2, p. 117-126

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Advantage of redundancy in the controllability of remote handling manipulator

    Muhammad, A., Mattila, J., Vilenius, M., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 1882-1885

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    A flexible laser micro-machining platform

    Vihinen, J., Latokartano, J. & Kumpulainen, T., 2012, Proceedings of The 8th International Workshop on Microfactories, IWMF 2012, 18-20 June, 2012, Tampere Hall, Tampere, Finland. Reijo, T., Minna, L. & Pasi, L. (eds.). Tampere: Tampere University of Technology, p. 1-6 6 p. (International Workshop on MicroFactories).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    A Flow Model for Contract Car Manufacturing Project

    Becker, I., 18 Aug 2016, Tampere University of Technology. 141 p. (Tampere University of Technology. Publication; vol. 1397)

    Research output: Book/ReportDoctoral thesisMonograph

  44. Published

    A follow-up case study of the relation of PLM Architecture, Maturity and Business processes

    Vainio, V. V. & Pulkkinen, A., 2016, Product Lifecycle Management in the Era of Internet of Things: 12th IFIP WG 5.1 International Conference, PLM 2015, Doha, Qatar, October 19-21, 2015, Revised Selected Papers. Springer New York LLC, p. 867-873 7 p. (IFIP Advances in Information and Communication Technology; vol. 467).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    A Framework for Building Behavioral Models of Technical and Economic Systems

    Ritola, T., Coatanea, E., Micaëlli, J. P. & Mokhtarian, H., 21 Aug 2016, Proceedings of the ASME 2016 Computers and Information in Engineering Conference IDETC/CIE 2016. Charlotte, North Carolina

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    A Framework for developing viable design methodologies for industry

    Lehtonen, T., Juuti, T., Oja, H., Suistoranta, S., Pulkkinen, A. & Riitahuhta, A., 2011, Proceedings of the 18th International Conference on Engineering Design, ICED 11, 15-18 August, 2011, Technical University of Denmark, Copenhagen, Denmark. Culley, S. J., Hicks, B. J., McAloone, T. C., Howard, T. J. & Clarkson, J. (eds.). Glasgow: The Design Society, p. 405-416 (International Conference on Engineering Design ICED; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    A Framework for evaluating applicability of design methodologies

    Vanhatalo, M., Lehtonen, T., Juuti, T., Pakkanen, J. & Riitahuhta, A., 2012, The 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Dorian, M., Mario, S., Neven, P. & Nenad, B. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, p. 1167-1176 (International Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    A framework for modeling agent-based control of service-enabled manufacturing systems

    Villasenor Herrera, V., Vidales Ramos, A. & Martinez Lastra, J. L., 2010, 10th IFAC Workshop on Intelligent Manufacturing Systems IMS '10, July 1-2, 2010, Lisbon, Portugal. p. 49-54

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    A Framework of design for procurement

    Pulkkinen, A., Martikainen, A. & Kuusela, J., 2012, Proceedings of the 18th International Conference on Engineering, Technology and Innovation 2012, ICE 2012, 18-20 June 2012, Munich, Germany. Bernhard, K., Thomas, H., Klaus, S. & Klaus-Dieter, T. (eds.). Munich: Strascheg Center for Entrepreneurship SCE at the Munich University of Applied Sciences (MUAS), p. 307-316 (International Conference on Engineering, Technology and Innovation).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    A genetic algorithm for optimizing vector-based paths of industrial manipulators

    Gonzalez Moctezuma, L. E., Nieto Lee, A. & Martinez Lastra, J. L., 2013, INDIN 2013, IEEE international conference on industrial informatics, Bochum, Germany, July 29-31, 2013. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 286-292 8 p. (IEEE international conference on industrial informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.