Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    Agent-based control of operational conditions for smart factories: the peak load management scenario

    Florea, A., Lauttamus, J., Postelnicu, C. & Martinez Lastra, J. L., 2013, Industrial applications of holonic and multi-agent systems, Proceedings of 6th international conference, HoloMAS 2013, Prague, Czech Repulic, August 26-28, 2013. Marik, V., Martinez Lastra, J. L. & Skobelev, P. (eds.). Berlin: Springer, p. 83-94 (Lecture Notes in Computer Science; vol. 8062).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  2. Published

    Aggregated Modeling and Power Hardware-in-the-Loop Emulation of Grid Impedance

    Alenius, H., Messo, T., Reinikka, T. & Roinila, T., 6 Dec 2018, The 10th Annual IEEE Energy Conversion Congress and Exposition (ECCE 2018): September 23-27, 2018, Portland, Oregon, USA. IEEE, p. 4179-4186 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Agility Challenges in Finnish Manufacturing Companies – Manufacturing Operations Management Viewpoint

    Järvenpää, E., Lanz, M. & Lammervo, E., Sep 2016, Advances in Production Management Systems: Initiatives for a Sustainable World - IFIP WG 5.7 International Conference, APMS 2016, Revised Selected Papers. Springer, p. 130-137 8 p. (IFIP Advances in Information and Communication Technology; vol. 488).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    A holistic view on design and development of manufacturing systems

    Nylund, H. & Andersson, P. H., 2012, Proceedings of the 45th CIRP CMC Conference on Manufacturing Systems Technology. Chryssolouris, G. & Mourtzis, D. (eds.). p. 438-443 (CIRP Conference on Manufacturing Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  5. Published

    A Holistic View on Design and Development of Manufacturing Systems

    Nylund, H. & Andersson, P. H., 2012, In : Procedia CIRP. 3, p. 388-393

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    A holistic view on modelling and simulation in the context of an intelligent manufacturing environment

    Nylund, H., Lanz, M., Tuokko, R. & Andersson, P. H., 2011, 21st International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2011, 26-29 June, 2011, Taichung, Taiwan. Taichung: FAIM 2011, p. 801-808 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  7. Published

    A H-scara mini robot - a dual parallel kinematics mini manipulator

    Siltala, N., Vuola, A., Heikkilä, R. & Tuokko, R., 2010, Proceedings of the joint conference of the 41st International Symposium on Robotics, ISR 2010, and 6th German Conference on Robotics, ROBOTIK 2010, 7-9 June, 2010, Munich, Germany. p. 1218-1224

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  8. Published

    A hydraulic cylinder model for multibody simulations

    Ylinen, A., Marjamäki, H. & Mäkinen, J., 2014, In : Computers & Structures. 138, p. 62-72 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Aircraft Hydraulic Fluid On-Line Condition Monitoring System for Maintenance and Troubleshooting Purposes

    Alarotu, V., Aaltonen, J., Koskinen, K. T. & Siitonen, M., 2013, Proceedings of the 4th CEAS Conference in Linköping, 2013. Melin, T., Krus, P., Vinterhav, E. & Övrebö, K. (eds.). Linköping: Linköping University Electronic Press, p. 188-195 8 p. (International Conference of the European Aerospace Societies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Aircraft Hydraulic System Fault Finding and Troubleshooting Using On-Line Particle Counters

    Aaltonen, J., Alarotu, V. & Koskinen, K. T., 2011, The Eight International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20-22 June 2011, Cardiff, Wales. Northamption: British Institute of Non-destructive Testing, p. 1275-1282 (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Aircraft hydraulic system model integration to fligh simulation model

    Hietala, J-P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 271-280 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Aligning product design methods and tools for sustainability

    Nahkala, S., 2013, Proceedings of the 20th CIRP, International Conference on life cycle engineering, Singapore, 17-19 April, 2013. Nee, A. Y. C., Song, B. & Ong, S-K. (eds.). Springer Singapore, p. 53-58 6 p. (Re-engineering manufacturing for sustainability).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    A low resolution digital hydraulic control application

    Kukkonen, S. & Mäkinen, E., 2012, Proceedings of the 13th Mechatronics Forum International Conference, September 17-19, 2012, Johannes Kepler University Linz, Austria, Advances in Mechatronics. Scheidl, R. & Jakoby, B. (eds.). Linz: TRAUNER VERLAG, p. 8 p (Mechatronics Forum; vol. 1/3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    A Macro-Micro Controller for Pallet Picking by an Articulated-frame-steering Hydraulic Mobile Machine

    M. Aref, M., Ghabcheloo, R. & Mattila, J., 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA), May 31 - June 7, 2014, Hong Kong, China. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 6816-6822 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    AMAD-painekytkimien laboratoriotestaus

    Hietala, J-P., 2009, Lentotekniikan rakennetutkimuksen neuvottelupäivät VII, 27.-28.8.2009, Tampere. Aaltonen, J. (ed.). p. 1-14 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    A measurement-integrated solution for particle image velocimetry and volume fraction measurements in a fluidized bed

    Kolehmainen, J., Elfvengren, J. & Saarenrinne, P., 2013, In : International Journal of Multiphase Flow. 56, p. 72-80 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    A Method and an Apparatus for Producing Nanocellulose

    Björkqvist, T., Koskinen, T., Nuopponen, M., Vehniäinen, A. & Gustafsson, H., 18 Feb 2015, IPC No. D21H 11/ 18 A I, Patent No. EP2659061, Priority date 31 Dec 2010, Priority No. FI 20106402

    Research output: PatentScientific

  18. Published

    A methodology for identifying web services in electronic manufacturing systems

    Villasenor Herrera, V., Nieto Lee, A. & Martinez Lastra, J. L., 2010, 8th IEEE International Conference on Industrial Informatics, INDIN 2010, 13-16 July, 2010, Osaka, Japan. p. 571-577

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    A miniature needle valve

    Karvonen, M., Juhola, M., Ahola, V., Söderlund, L. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 61-78

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    A Miniature On/Off Valve Concept for High Performance Water Hydraulics

    Paloniitty, M. & Linjama, M., 19 Oct 2017, ASME/BATH 2017 Symposium on Fluid Power and Motion Control. ASME, 8 p. FPMC2017-4254

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    A model for anisotropic magnetostriction

    Belahcen, A., Kouhia, R., Rasilo, P. & Ristinmaa, M., 2015, Proceedings of the XII Finnish Mechanics Days. Rakenteiden Mekaniikan Seura ry, p. 201-203 3 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  22. Published

    A model for scheduling of employees using supplier selection

    Holopainen, S., 2014, Engineering optimization IV, Proceedings of the International Conference on Engineering Optimiztion (ENGOPT 2014), Lisbon, Portugal, 8-11 September 2014. Rodrigues, H. C., Herskovits, J., Mota Soares, C. M., Guedes, J. M., Araújo, A. L., Folgado, J. O., Moleiro, F. & Madeira, J. F. A. (eds.). The Netherlands: CRC Press/Balkema, p. 533-538 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  23. Published

    An agent-based system for orchestration support of web service-enabled devices in discrete manufacturing systems

    Villasenor Herrera, V., Vidales Ramos, A. & Martinez Lastra, J., 2012, In : Journal of Intelligent Manufacturing. 23, 6, p. 2681-2702

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Analysis and control of a single leg for hydraulically actuated quadruped robot

    Xia, Y., Aaltonen, J. & Koskinen, K. T., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 149-160 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Analysis of Adaptive/Learning Control Methods in Cyclic Hydraulic System

    Herranen, M., Enlund, J., Uusisalo, J. & Huhtala, K., 2012, Proceedings of the 8th International Fluid Power Conference, Dresden, March 26-28, 2012. Dresden: Technische Universität Dresden, Institute of Fluid Power, p. 399-410 (International Fluid Power Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Analysis of common rail pressure signal of dual-fuel large industrial engine for identification of injection duration of pilot diesel injectors

    Krogerus, T., Hyvönen, M. & Huhtala, K., Mar 2018, In : Fuel. 216, p. 1-9

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Analysis of effect of remote control on usability of hydraulic mobile machines

    Uusisalo, J. & Huhtala, K., 2011, Proceedings of the 8th JFPS International Symposium on Fluid Power, Okinawa 2011, October 25-28, 2011, Okinawa, Japan. Okinawa: JFPS international Symposium on Fluid Power, p. 688-695 (International Symposium on Fluid Power JFPS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Analysis of Inter-firm Co-operation in Joint Research and Development Projects

    Majuri, M., Nylund, H. & Lanz, M., 1 Sep 2016, Advances in Production Management Systems: Initiatives for a Sustainable World - IFIP WG 5.7 International Conference, APMS 2016, Revised Selected Papers. p. 536-543 8 p. (IFIP Advances in Information and Communication Technology).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Analysis of Real-Time Properties of a Digital Hydraulic Power Management System

    Boström, P., Alexeev, P., Heikkilä, M., Huova, M., Waldén, M. & Linjama, M., 2014, 19th International Conference, FMICS 2014, Florence, Italy, September 11-12, 2014.. Springer International Publishing, p. 33-47 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Analysis of signals and power flow in a digital hydraulic multi actuator application

    Karvonen, M., Heikkilä, M., Linjama, M. & Huhtala, K., 2014, 8th FPNI Ph.D Symposium on Fluid Power, FPNI2014, June 11-13, 2014, Lappeenranta, Finland. The American Society of Mechanical Engineers ASME, p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Analysis of single flank test results providing flank topography errors of spiral bevel gears

    Jerabek, F., 2000, Tampere: Tampere University of Technology. (Tampereen teknillinen korkeakoulu. Julkaisuja; vol. 314)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  32. Published

    Analysis of Slipper Structures in Water Hydraulic Axial Piston Pumps

    Rokala, M., 2012, Tampere: Tampere University of Technology. (Tampereen teknillinen yliopisto, Julkaisu; no. 1055)

    Research output: Book/ReportDoctoral thesisMonograph

  33. Published

    Analysis of the aircraft operational reliability research series: From statistical models to avionics data monitoring

    Laitinen, J. & Niemi, A., 2015, Proceedings of the 9th World congress on engineering asset management (WCEAM 2014), Pretoria, South Africa 28-31 Oct, 2014. 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Analysis of the Effects of Path Properties on Autonomous Motion Control of a Hydraulic Tracked Vehicle

    Mononen, T., Aref, M. M. & Mattila, J., Nov 2018, 2018 25th International Conference on Mechatronics and Machine Vision in Practice (M2VIP). IEEE, 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Analysis of the new architecture proposal for the CMM control system

    Heikkilä, L., Saarinen, H., Aha, L., Viinikainen, M., Mattila, J., Hahto, A., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2071-2074

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    Analysis of the stress raising action of flaws in laser clad deposits

    Alam, M. M., Kaplan, A. F. H., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkala, J., Peltola, T. & Barsoum, Z., 2013, In : Materials and Design. 46, April, p. 328-337 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    Analytical solution for a class of flat plate conjugate convective heat transfer problems

    Lehtinen, A. & Karvinen, R., 2011, In : Frontiers in Heat and Mass Transfer. 2, p. 1-6 6 p., 043004.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    An anisotropic continuum damage model for concrete

    Yaghoubi, S. T., Hartikainen, J., Kolari, K. & Kouhia, R., 2015, Proceedings of the XII Finnish Mechanics Days: Suomen XII mekaniikkapäivien esitelmät. Kouhia, R., Mäkinen, J., Pajunen, S. & Saksala, T. (eds.). Rakenteiden Mekaniikan Seura ry, p. 51 56 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  39. Published

    An application of B2MML in computer integrated manufacturing systems

    He, D., Lobov, A. & Martinez Lastra, J. L., 2012, Proceedings of the 16th International Conference on Mechatronics Technology, ICMT 2012, 16-19 October, 2012, Tianjin, China. Dante, J. D. G. (ed.). Tianjin: Tianjin University, p. 300-305 (International Conference on Mechatronics Technology).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    An application of Cloud Robotics for enhancing the Flexibility of Robotic Cells at Factory Shop Floors

    Hussnain, A., Ferrer, B. R. & Lastra, J. L. M., Oct 2018, IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society. IEEE, p. 2963-2970 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    An approach for integrating legacy systems in the manufacturing industry

    Govindarajan, N., Ramis Ferrer, B., Xu, X., Nieto, A. & Martinez Lastra, J. L., Jul 2016, 2016 IEEE 14th International Conference on Industrial Informatics (INDIN). IEEE, p. 683-688 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    An approach for interconnection and unification of state models in discrete manufacturing

    Gruner, S., Schmitt, J., Lobov, A. & Hassan, H., Jul 2018, 2018 IEEE 16th International Conference on Industrial Informatics (INDIN) : Porto, Portugal, 18-20 July 2018. Porto, Portugal: IEEE, p. 565-570 6 p. (IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL INFORMATICS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    An approach for OSGi and DPWS interoperability: bridning enterprise application with shop-floor

    Iarovyi, S., Garcia, J. & Martinez Lastra, J. L., 2013, Proceedings 2013 11the IEEE international conference on industrial informatics INDIN, Bochum, Germany, July 29-31, 2013. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 200-205 6 p. (IEEE international conference on industrial informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    An approach to investigating subsurface fatigue in a rolling/sliding contact

    Savolainen, M. & Lehtovaara, A., 2018, In : International Journal of Fatigue. 117, p. 180-188

    Research output: Contribution to journalArticleScientificpeer-review

  45. Published

    An approach to model relations between product variety and manufacturing process variety

    Huhtala, P., Pulkkinen, A. & Leskinen, A., 2010, NordDesign 2010 Conference, 25-27 August, 2010, Göteborg, Sweden. Dagman, A. & Söderberg, R. (eds.). p. 129-138

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    An approach to service deployment to the service cloud

    Puttonen, J., Lobov, A. & Martinez Lastra, J. L., 2011, GlobeNet 2011, The Sixth International Conference on Systems, ICONS 2011, 23-28 January, 2011, St. Maarten, The Netherlands Antilles. St. Maarten: IARIA, p. 122-127 (International Conference on Systems ICONS GlobeNet).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  47. Published

    An approach to use PERA in enterprise modeling for industrial systems

    He, D., Lobov, A., Gonzalez Moctezuma, L. E. & Martinez Lastra, J. L., 2012, Proceedings of the 38th Annual Conference of the IEEE Industrial Electronics Society, IECON 2012, 25-28 October, 2012, Montreal, Quebec, Canada. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 4196-4203 (Annual Conference of the IEEE Industrial Electronics Society).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    An Efficient Heuristic Estimate for Non-holonomic Motion Planning

    Choi, J-W., 2012, The 4th Workshop on Planning, Perception and Navigation for Intelligent Vehicles, October 7th, 2012 Vilamoura, Algarve, Portugal. p. 1-6 6 p. (Workshop on Planning, Perception and Navigation for Intelligent Vehicles).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    An Energy-Efficient High Performance Motion Control of a Hydraulic Crane Applying Virtual Decomposition Control

    Koivumäki, J. & Mattila, J., 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) November 3-7, 2013, Tokyo, Japan. Institute of Electrical and Electronics Engineers IEEE, p. 4426-4433 8 p. (IEEE/RSJ International Conference on Intelligent Robots and Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    A Network based modelling approach using the dimensional analysis conceptual modeling (DACM) framework for additive manufacturing technologies

    Mokhtarian, H., Coatanea, E., Paris, H., Ritola, T., Ellman, A., Vihinen, J., Koskinen, K. & Ikkala, K., 21 Aug 2016, Proceedings of the ASME 2016 Computers and Information in Engineering Conference IDETC/CIE 2016. Charlotte, North Carolina : ASME, 9 p. DETC2016-60473

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.