Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    Numerical modeling and experimentation of dynamic Brazilian disc test on Kuru granite

    Saksala, T., Hokka, M., Kuokkala, V-T. & Mäkinen, J., 2013, In : International Journal of Rock Mechanics and Mining Sciences. 59, April, p. 128-138 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  2. Published

    Numerical modeling and experimentation of dynamic indentation with single and triple indenters on Kuru granite

    Saksala, T., Gomon, D., Hokka, M. & Kuokkala, V-T., 2013, Rock Dynamics and Applications - State of the Art, Proceedings of the first international conference on rock dynamics and applications, RocDyn-1, Lausanne, Switzerland, 6-8 June 2013. Zhao, J. & Li, J. (eds.). Boca Raton: CRC Press Taylor & Francis Group : A Belkema Book, p. 415-421 7 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  3. Published

    Numerical modeling of dynamic rock fracture with a combined 3D continuum viscodamage-embedded discontinuity model

    Saksala, T., Brancherie, D. & Ibrahimbegovic, A., 2016, In : International Journal for Numerical and Analytical Methods in Geomechanics. 40, 9, p. 1339–1357 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Numerical modeling of fine particle and deposit formation in a recovery boiler

    Leppänen, A., Tran, H., Taipale, R., Välimäki, E. & Oksanen, A., 1 Aug 2014, In : Fuel. 129, p. 45-53 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Numerical modelling of bit-rock fracture mechanisms in percussive drilling with a continuum approach

    Saksala, T., 2011, In : International Journal for Numerical and Analytical Methods in Geomechanics. 35, 13, p. 1483-1505

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    Numerical modelling of bit-rock interaction in percussive drilling

    Saksala, T., 2010, ECCM 2010, IV European Conference on Computational Mechanics, May 16-21, 2010, Paris, France. p. 1-2 2 p. 2078

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  7. Published

    Numerical modelling of bit-rock interaction in percussive drilling by manifold approach

    Saksala, T. J. & Mäkinen, J. M., 2010, Proceedings of NSCM-23: the 23rd Nordic Seminar on Computational Mechanics NSCM-23, 21-22 October 2010, Stockholm, Sweden. Eriksson, A. & Tibert, G. (eds.). p. 247-250

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Numerical modelling of concrete fracture: A mesoscopic approach based on embedded discontinuity FEM

    Saksala, T., Oct 2019, Proceedings of the 32nd Nordic Seminar on Computational Mechanics. Niemi, A. H. & Koivurova, H. (eds.). University of Oulu, p. 146-149 4 p. (Raportti / Oulun yliopisto, konetekniikka; no. 9).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  9. Published

    Numerical modelling of rock fracture in percussive drilling

    Saksala, T., 2010, Tampere: Tampere University of Technology. 103 p. (Tampereen teknillinen yliopisto. Julkaisu; vol. 886)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  10. Published

    Numerical modelling of rock fracture with the embedded discontinuity approach incorporating heterogeneity

    Saksala, T., 2015, ISRM Congress 2015 Proceedings: Innovations in Applied and Theoretical Rock Mechanics. International Society for Rock Mechanics ISRM, 11 p. 177

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Numerical Simulation of Dynamic Brazilian Disc Test on Rock

    Saksala, T., Hokka, M., Kuokkala, V-T. & Mäkinen, J., 2011, Proceedings of the 24th Nordic Seminar on Computational Mechanics, Aalto University publication series. SCIENCE + TECHNOLOGY. Freund, J. & Kouhia, R. (eds.). Espoo: Aalto University, p. 154-157 (Nordic Seminar on Computational Mechanics; vol. 23/2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  12. Published

    Numerical study of the influence of hydrostatic and confining pressure on percussive drilling of hard rock

    Saksala, T., 2016, In : Computers and Geotechnics. 76, p. 120-128 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Objektives, enablers and challenges of sustainable development and sustainable manufacturing

    Koho, M., Torvinen, S. & Torres Romiguer, A., 2011, IEEE International Symposium on Assembly and Manufacturing, ISAM 2011, 25-27 May, 2011, Tampere Hall, Tampere, Finland. Piscataway, NJ: IEEE, p. 1-6 6 p. (IEEE International Symposium on Assembly and Manufacturing ISAM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    ON3 - Biohybrid nanocomposite coatings from sonicated chitosan and nanoclay

    Vartiainen, J., Tuominen, M. & Nättinen, K., 2010, 4th Shelf Life International Meeting (SLIM), June 23-25, 2010, Zaragoza, Spain. p. 24-24

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  15. Published

    On-board data transfer of automated heavy machinery

    Karhu, O. & Huhtala, K., 2011, Proceedings of the 8th JFPS International Symposium on Fluid Power, Okinawa 2011, October 25-28, 2011, Okinawa, Japan. Okinawa: JFPS international Symposium on Fluid Power, p. 144-150 (International Symposium on Fluid Power JFPS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    On-Board Electronic Control Systems of Future Automated Heavy Machinery

    Karhu, O., 4 Dec 2015, Tampere University of Technology. 148 p. (Tampere University of Technology. Publication; vol. 1352)

    Research output: Book/ReportDoctoral thesisMonograph

  17. Published

    On-board system integration of a mobile machine with automated functions operating in a multi-machine environment

    Karhu, O., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    On computing critical equilibrium points by direct method

    Mäkinen, J., Kouhia, R. & Ylinen, A., 2010, Proceedings of NSCM-23: the 23td Nordic Seminar on Computational Mechanics, NSCM-23, 21-22 October 2010, Stockholm, Sweden. Eriksson, A. & Tibert, G. (eds.). p. 271-274

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    On design and development of additional End-Effectors for the Cassette Multifunctional Mover

    Valkama, P., Mattila, J., Amjad, F., Väyrynen, J., Vilenius, M., Siuko, M., Semeraro, L. & Esque, S., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 1946-1949

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Online quality evaluation of tissue paper structure on new generation tissue machines

    Raunio, J-P., Löyttyniemi, T. & Ritala, R., 26 Mar 2018, In : Nordic Pulp and Paper Research Journal. 33, 1, p. 133-141 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    On optimisation of structures under stability constraints - a simple example

    Kouhia, R., Pajunen, S. & Poutala, J., 9 Dec 2016, In : Rakenteiden mekaniikka. 49, 2, p. 69-77 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    On the choice of damage variable in the continuum fatigue model based on a moving endurance surface

    Saksala, T., Holopainen, S. & Kouhia, R., May 2015, Proceedings of the XII Finnish Mechanics Day. p. 57-62 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  23. Published

    On the direct solution of critical equilibrium states

    Erikson, A., Kouhia, R. & Mäkinen, J., Jun 2015, Proceeding of the XII Finnish Mechanics Days. Kouhia, R., Mäkinen, J., Pajunen, S. & Saksala, T. (eds.). Helsinki: Rakenteiden Mekaniikan Seura ry, p. 244-247 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  24. Published

    On the effect of damping on stability of non-conservative systems

    Jeronen, J. & Kouhia, R., 2015, Proceedings of the XII Finnish Mechanics Days: Suomen XII mekaniikkapäivien esitelmät. Kouhia, R., Mäkinen, J., Pajunen, S. & Saksala, T. (eds.). Rakenteiden Mekaniikan Seura ry, p. 77 82 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  25. Published

    On the equivalence of minimum compliance and stress-constrained minimum weight design of trusses under multiple loading conditions

    Mela, K. & Koski, J., 2012, In : Structural and Multidisciplinary Optimization. 46, 5, p. 679-691

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    On the flocculation in fiber suspensions

    Putkiranta, M., Marjanen, K., Eloranta, H., Pärssinen, T. & Saarenrinne, P., 2010, 7th International Conference on Multiphase Flow ICMF-2010, May 30 - June 4, 2010 Tampa, Florida. p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    On the integration of an evolution equation based high-cycle fatigue model

    Jeronen, J., Kouhia, R., Lahtinen, J. & Orelma, H., 2019, Proceedings of the 32nd Nordic Seminar on Computational Mechanics. Niemi, A. H. & Koivurova, H. (eds.). University of Oulu, p. 95-97 3 p. (Raportti / Oulun yliopisto, konetekniikka; no. 9).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  28. Published

    On the Kachanov-Rabotnov continuum damage model

    Askes, H., Hartikainen, J., Kolari, K., Kouhia, R., Saksala, T. & Vilppo, J., 2020, In : Rakenteiden mekaniikka. 53, 2, p. 125-144 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    On the numerical solution of a micropolar continuum model

    Kouhia, R. & Niemi, A. H., 2013, Proceedings of the 26th Nordic Seminar on Computational Mechanics, Oslo, 23 - 25 October, 2013. Logg, A., Mardal, K. A. & Massing, A. (eds.). Center for Biomedical Computing, Simula Research Laboratory, p. 128-131 4 p. (Nordic Seminar on Computational Mechanics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  30. Published

    On the numerical solution of steady-state equations of digital hydraulic valve-actuator system

    Linjama, M., 24 May 2016, Proceedings of the eighth workshop on digital fluid power. Uusi-Heikkilä, J. & Linjama, M. (eds.). Tampere: Tampere University of Technology, p. 141-155

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  31. Published

    On the orientation probability distribution of flexible fibres in a contracting channel flow

    Niskanen, H., Eloranta, H., Tuomela, J. & Hämäläinen, J., 2011, In : International Journal of Multiphase Flow. 37, 4, p. 336-345

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    On the procedures for critical point computations in solid and structural mechanics

    Feodoroff, A., Kouhia, R., Mäkinen, J. & Tuma, M., 2012, Proceedings of the 11th Finnish Mechanics Days. XI Suomen Mekaniikkapäivät, Oulun yliopisto 29.-30.11.2012. Hannu, K. & Mikko, M. (eds.). Oulu: Oulun yliopisto, p. 95-100 (Finnish Mechanics Days. Suomen Mekaniikkapäivät).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    On the regularisation property of the Kachanov-Rabotnov continuum damage model - a finite element study

    Askes, H., Hartikainen, J., Kolari, K., Kouhia, R., Saksala, T. & Vilppo, J., Oct 2019, Proceedings of the 32nd Nordic Seminar on Computational Mechanics. Niemi, A. H. & Koivurova, H. (eds.). University of Oulu, p. 43-46 4 p. (Raportti / Oulun yliopisto, Konetekniikka; no. 9).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  34. Published

    On the relation of business processes and engineering change management

    Pulkkinen, A. & Riitahuhta, A., 2009, Proceedings of the 6th International Product Lifecycle Management conference, PLM09, 6-8 July 2009, Bath, UK. McMahon, C., Dutta, D. & Huang, G. (eds.). p. 10 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  35. Published

    On the selecting weight factors in the least-squares finite element method

    Francois, J., Kouhia, R., Mikkola, M. & Salonen, E. M., 2012, Proceedings of the 11th Finnish Mechanics Days . XI Suomen Mekaniikkapäivät, Oulun yliopisto 29.-30.11.2012. Hannu, K. & Mikko, M. (eds.). Oulu: University of Oulu, p. 89-94 (Finnish Mechanics Days. Suomen Mekaniikkapäivät).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    On the solution of non-linear diffusion equation

    Kouhia, R., 2013, In : Rakenteiden mekaniikka. 46, 4, p. 116-130 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    On the Updating of Domain OWL Models at Runtime in Factory Automation Systems

    Puttonen, J., Lobov, A. & Martinez Lastra, J. L., 2014, In : International Journal of Web Services Research. 11, 2, p. 46-66 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    On Three Competing Maintenance Actions and the Related Condition Control

    Hagmark, P-E., 2011, In : International Journal of Quality, Statistics, and Reliability. 2011, p. 1-6 6 p., 637079.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    Ontological framework of context-aware and reasoning middleware for smart homes with health and social services

    Evchina, Y., Dvoryanchikova, A. & Martinez Lastra, J. L., 2012, Proceedings of 2012 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2012, 14-17 October, 2012, COEX, Seoul, Korea. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 985-990 (IEEE International Conference on Systems, Man, and Cybernetics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Ontology-based context-sensitive computing for FMS optimization

    Uddin, K. M., Puttonen, J., Scholze, S., Dvoryanchikova, A. & Martinez Lastra, J. L., 2012, In : Assembly Automation. 32, 2, p. 163-174

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    On vibroacoustic analysis of grinding contact vibrations

    Järvenpää, V-M., Yuan, L. & Kalbasi Shirvani, H., 2014, Proceedings of the 21st International Congress on Sound and Vibration, In Depth Sound and Vibration Research, 2014 ICSV21, 13-17 July, 2014, Beijing. Crocker, M. J., Pawelczyk, M. & Tian, J. (eds.). International Institute of Acoustics and Vibration (IIAV), p. 2431-2436 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  42. Published

    OPC-UA and DPWS interoperability for factory floor monitoring using complex event processing

    Garcia, I. M. J. A., Lobov, A. & Martinez Lastra, J. L., 2011, IEEE 9th International Conference on Industrial Informatics, INDIN 2011, 26-29 July, 2011, Caparica, Lisbon, Portugal. Piscataway, NJ: IEEE, p. 205-211 (International Conference on Industrial Informatics INDIN).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Open Automation of Manufacturing Systems through Integration of Ontology and Web Services

    Garetti, M., Fumagalli, L., Lobov, A. & Martinez Lastra, J. L., 2013, 7th IFAC Conference on manufacturing modelling, management and control, June 19-21, 2013. Saint Petersburg, Russia. Bakhtadze, N., Chernyshov, K., Dolgui, A. & Lototsky, V. (eds.). International Federation of Automatic Control, p. 198-203 6 p. (Elsevier IFAC Publications / IFAC Proceedings series; vol. 7).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Open Product Development

    Riitahuhta, A., Lehtonen, T., Pulkkinen, A. & Huhtala, P., 2011, The future of design methodology. Birkhofer, H. (ed.). London: Springer, p. 135-146

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  45. Published

    Optimal control of pump rotational speed in filling and emptying a reservoir: minimum energy consumption with fixed time

    Lindstedt, M. & Karvinen, R., Dec 2016, In : Energy Efficiency. 9, 6, p. 1461–1474 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Optimal design of stiffened plate using metamodeling techniques

    Heinonen, O. & Pajunen, S., 2011, In : Rakenteiden mekaniikka. 44, 3, p. 218-230

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Optimal geometry of single fins and fin arrays

    Lindstedt, M. & Karvinen, R., 2013, Eurotherm Seminar No 96, Convective Heat Transfer Enhancement 17-18 September 2013, Royal Military Academy, Brussels, Belgium. Ecole Royale Militaire; von Karman Insitute for fluid dynamics; Universite de Valenciennes et du Hainaut-Cambresis, p. 1-6 6 p. 33

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Optimal Shapes of Straight Fins and Finned Heat Sinks

    Lindstedt, M., Lampio, K. & Karvinen, R., Jun 2015, In : Journal of Heat Transfer: Transactions of the ASME. 137, 6, 8 p., 061006.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Optimization and energy consumption of electro-hydraulic valve actuation system through valve event timing range

    Herranen, M., Huhtala, K. & Vilenius, M., 2010, Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK. Johnston, D. N. & Plummer, A. (eds.). p. 433-445

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Optimization of convectively cooled heat sinks

    Lampio, K. & Karvinen, R., 2017, In : Microelectronics Reliability. 79, p. 473-479

    Research output: Contribution to journalArticleScientificpeer-review

Download list To download, please limit the number of search results to 1,000 or less.