Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    A service-oriented monitoring system of pressurized air in industrial systems for energy awareness

    Rabeko, P., Lobov, A. & Martinez Lastra, J. L., 2011, GlobeNet 2011, The Sixth International Conference on Systems, ICONS 2011, 23-28 January, 2011, St. Maarten, The Netherlands Antilles. St. Maarten: IARIA, p. 150-156 (International Conference on Systems ICONS GlobeNet).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  2. Published

    A simplified model of CO2-gas cooler

    Aittomäki, E. A., 2010, IIR/ Eurotherm, Sustainable Refrigeration and Heat Pump Technology Conference and 2nd IIR Workshop on Refrigerant Charge Reduction in Refrigeration Systems, Royal Institute of Technology (KTH), Stockholm, Sweden, on June 13-17, 2010. p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Aspects of the energy consumption of a digital hydraulic power management system supplying a digital and proportional valve controlled multi actuator system

    Karvonen, M., Heikkilä, M., Tikkanen, S., Linjama, M. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Assembly line balancing and sequencing

    Uddin, K. M. & Martinez Lastra, J. L., 2011, Assembly Line - Theory and Practice. Grzechca, W. (ed.). Croatia: InTech, p. 13-36

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  5. Published

    Assessment of IEC-61499 and CDL for function block composition in factory-wide system integration

    Ramis, B., Garcia, J. & Martinez Lastra, J. L., 2013, Proceedings 2013 IEEE international conference on industrial informatics INDIN, Bochum, Germany, July 29-31, 2013. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 212-217 6 p. (IEEE international conference on industrial informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Assistive Obstacle-Free Path Planning in the Image Space for Teleoperation Tasks Using Monocular Camera

    Ziaei, Z., Oftadeh, R. & Mattila, J., 2014, 18th International Conference on System Theory, Control and Computing, ICSTCC 2014, October 17-19, 2014, Sinaia, Romania. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 838-844 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Association of exercise loading history with fall-induced hip fracture risk.

    Abe, S., Narra, N., Nikander, R., Hyttinen, J., Kouhia, R. & Sievänen, H., 2017.

    Research output: Other conference contributionPaper, poster or abstractScientific

  8. Published

    A Survey of Analysis, Modeling, and Diagnostics of Diesel Fuel Injection Systems

    Krogerus, T. R., Hyvönen, M. P. & Huhtala, K. J., 2016, In : Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 138, 8, p. 1 11 p., 081501.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Augmented reality aiding collimator exchange at the LHC

    Martinez, H., Fabry, T., Laukkanen, S., Mattila, J. & Tabourot, L., 2014, In : Nuclear instruments and Methods in Physics Research Section A: Accelerators Spectrometers Detectors and Associated Equipment. 763, p. 354-363 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Augmented reality for operator assistance

    Kolu, A., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 9-13 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    A unified lcf-hcf model based on continuum mechanics

    Kouhia, R., Holopainen, S., Ottosen, N. S., Matti, R. & Saksala, T., 2016. 4 p.

    Research output: Other conference contributionPaper, poster or abstractScientific

  12. Published

    A use case analysis method for the implementation of service-oriented solutions for monitoring and diagnostics

    Macchi, M., Fumagalli, L., Garetti, M., Tavola, G., Checcozzo, R., Rusina, F., Vidales Ramos, A., Jokinen, J., Popescu, C., Martinez Lastra, J., Karhumäki, O. & Vainio, M., 2011, Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management, COMADEM 2011, Advances in Industrial Asset Integrity Management, 30 May-1 June 2011, Stavanger, Norway. Singh, M., Rao, R. B. K. N. & Liyanage, J. P. (eds.). Stavanger: COMADEM International, p. 406-413 (International Congress on Condition Monitoring and Diagnostic Engineering Management COMADEM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Automaattinen öljyn epäpuhtauksien mittaus ja keskeiset standardit

    Multanen, P., Niiranen, E., Elo, L. & Rinkinen, J., 2014, PAMAS 2014 Käyttäjäpäivä, 4.2.2014, Tampereen teknillinen yliopisto, Tampere. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). Tampere: Tampereen teknillinen yliopisto, p. 43-70 28 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  14. Published

    Automated control system for indoor air quality management

    Aslam, Z., Khalid, W., Ahmed, T. & Marghoob, D., 1 Nov 2017, 2017 International Conference on Energy Conservation and Efficiency (ICECE). IEEE, p. 85-88 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Automated high-throughput microbond tester for interfacial shear strength studies

    von Essen, M., Sarlin, E., Tanhuanpää, O., Kakkonen, M. M. S., Laurikainen, P., Hoikkanen, M., Haakana, R., Vuorinen, J. & Kallio, P., 2017, Proceedings of SAMPE Conference 17 Stuttgart. SAMPE Europe, 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Automated object locator in a forest forwarder

    Hahto, A., Mattila, J. & Koivisto, H., 2010, In : Applied Artificial Intelligence. 24, 7, p. 711-721

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Automatic design of marine structures by using successive response surface method

    Pajunen, S. & Heinonen, O., 2013, In : Structural and Multidisciplinary Optimization. p. 1-9 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Automotive transmission system design based on reliability parameters

    Douzi, I. K., Virtanen, S. & Verma, A. K., 2012, In : Journal of Reliability and Statistical Studies. 5, 2, p. 2229-5666

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Autonomous and collaborative offshore robotics

    Villa Escusol, J., Aaltonen, J. & Koskinen, K., 2017, Proceedings of the 2nd Annual SMACC Research Seminar 2017. Tampere University of Technology, p. 57-59 3 p. 15

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  20. Published

    Autonomous fleet management utilizing OpenSplice DDS

    Rasi, T., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 88-102 15 p. (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Autonomous pallet picking of GIM machine

    Hyvönen, M., Ghabcheloo, R., Mantere, P., Kolu, A. & Huhtala, K., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 30-36 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Availability modeling approach for future circular colliders based on the LHC operation experience

    Niemi, A., Apollonio, A., Gutleber, J., Sollander, P., Penttinen, J-P. & Virtanen, S., 2016, In : Physical Review Special Topics: Accelerators and Beams. 19, 12, 121003.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    A web tool supporting the management and use of electronic module descriptions for evolvable production systems

    Siltala, N. & Tuokko, R., 2010, Proceedings of 2010 IEEE International Symposium on Industrial Electronics, ISIE 2010, 4-7 July, 2010, Bari, Italy. p. 2641-2646

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Betonin ajasta riippumattomat materiaalimallit

    Kouhia, R., 2013, Unknown Publisher. 83 p. (Liikenneviraston tutkimuksia ja selvityksiä; no. 38)

    Research output: Book/ReportCommissioned reportProfessional

  25. Published

    Big data analytics for the Future Circular Collider reliability and availability studies

    Begy, V., Apollonio, A., Gutleber, J., Martin-Marquez, M., Niemi, A., Penttinen, J-P., Rogova, E., Romero-Marin, A. & Sollander, P., 23 Nov 2017, 22nd International Conference on Computing in High Energy and Nuclear Physics (CHEP2016). IOP Publishing, ( Journal of Physics: Conference Series; vol. 898).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Big data tulee – nykytila ja tulevaisuuden mahdollisuudet

    Holopainen, S. (Guest ed.) & Kuusi, O. (Guest ed.), Jun 2016, In : Futura. 2, 113 p.

    Research output: Contribution to journalSpecial issueScientificpeer-review

  27. Published

    Bio-hybrid nanocomposite packaging materials from polysaccharides and nanoclay

    Vartiainen, J., Tuominen, M., Nättinen, K., Tammelin, T., Pere, J., Tapper, U. & Harlin, A., 2010, ICOST Action: FA0904, Conference and WGs Meeting, June 28-29, 2010, Iasi, Romania. Vasile, C. & Ciolacu, D. (eds.). p. 29-29

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  28. Published

    Bounded-Velocity Motion Control of Four Wheel Steered Mobile Robots

    Oftadeh, R., Aref, M. M., Ghabcheloo, R. & Mattila, J., 2013, 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2013, Mechatronics for Human Wellbeing, July 9-12, 2013, Wollongong, Australia. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 255-260 6 p. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Breaking down the requirements: Reliability in remote handling software

    Alho, P. & Mattila, J., 2013, In : Fusion Engineering and Design. 88, 9-10, p. 1912-1915 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    Brownfield Process: A Method for the Rationalisation of Existing Product Variety towards a Modular Product Family

    Pakkanen, J., 29 May 2015, Tampere University of Technology. 283 p. (Tampere University of Technology. Publication; vol. 1299)

    Research output: Book/ReportDoctoral thesisMonograph

  31. Published

    Brownfield Process: A method for modular product family development aiming for product configuration

    Pakkanen, J., Juuti, T. & Lehtonen, T., 2016, In : DESIGN STUDIES. 45B, p. 210-241 32 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    Brownfield process for developing of product families

    Lehtonen, T., Pakkanen, J., Järvenpää, J., Lanz, M. & Tuokko, R., 2011, Proceedings of the 18th International Conference on Engineering Design, ICED 11, 15-18 August, 2011, Technical University of Denmark, Copenhagen, Denmark. Culley, S. J., Hicks, B. J., McAloone, T. C., Howard, T. J. & Clarkson, J. (eds.). Glasgow: The Design Society, p. 248-257 (International Conference on Engineering Design ICED; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Brownfield process for the rationalisation of existing product variety towards a modular product family

    Pakkanen, J., Juuti, T. & Lehtonen, T., 2015, ICED 15, vol 7: Product Modularisation, Product Architecture, Systems Engineering, Product Service Systems. Weber, C., Husung, S., Cascini, G., Cantamessa, M., Marjanovic, D. & Rotini, F. (eds.). The Design Society, Vol. 7. 10 p. (International Conference on Engineering Design).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Bubble dynamics and interactions with a pair of micro pillars in tandem

    Elcocka, D., Honkanen, M., Kuoc, C., Amitaya, M. & Pelesa, Y., 2011, In : International Journal of Multiphase Flow. 37, 5, p. 440-452

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Calibration and compensation of deflections and compliances in remote handling equipment configurations

    Kivelä, T., Saarinen, H., Mattila, J., Hämäläinen, V., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2043-2046

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    Capability-based adaptation of production systems in a changing environment

    Järvenpää, E., 2012, Tampere: Tampere University of Technology. 168 p. (Tampere University of Technology. Publication; vol. 1082)

    Research output: Book/ReportDoctoral thesisMonograph

  37. Published

    Capability-Based Adaptation of Production Systems - Practical Case Study in TUT-Microfactory Environment

    Järvenpää, E., Lanz, M. & Tuokko, R., 2013, 5th International conference on advanced design and manufacture, 25-28 September 2013, Valencia, Spain. Su, D. & Zhu, S. (eds.). Trans Tech Publications, p. 245-248 4 p. (Key Engineering Materials; vol. 572).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Capability-Based Approach for Evaluating the Impact of Product Requirement Changes on the Production System

    Järvenpää, E. & Torvinen, S., 2013, 23rd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 13, The challenge of sustaining global competitive manufacturing system, 26-28 June 2013 Porto Portugal, Advances in Sustainable and Competitive Manufacturing Systems. Azevedo, A. (ed.). Switzerland: Springer International Publishing, p. 173-185 13 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Capability-based ontological resource model and rules for describing and assigning resources in sheet metal manufacturing

    Järvenpää, E., Lohtander, M. & Tuokko, R., 2013, 2013 IEEE International Symposium of Assembly and Manufacturing (ISAM), July 30th – Aug 2nd 2013, Xi’an, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 105-108 3 p. (International Symposium on Assembly and Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Capability Matchmaking Procedure to Support Rapid Configuration and Re-configuration of Production Systems

    Järvenpää, E., Siltala, N., Hylli, O. & Lanz, M., Sep 2017, In : Procedia Manufacturing. 11, p. 1053-1060 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Capability of the turret punch press process: Intelligence between design and manufacturing

    Lohtander, M., Järvenpää, E. & Varis, J., 2013, 2013 IEEE International Symposium of Assembly and Manufacturing (ISAM), July 30th – Aug 2nd 2013, Xi’an, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 180-182 3 p. (International Symposium on Assembly and Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Capturing the flows of the product process

    Pakkanen, J., Becker, I., Lehtonen, T. & Juuti, T., 2012, The 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Dorian, M., Mario, S., Neven, P. & Nenad, B. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, p. 1557-1566 (International Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Case: Control application for rapidly configurable manufacturing laboratory environment

    Siltala, N., Vihinen, J. & Tuokko, R., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Production Engineering, p. 217-224 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Case study on engineering change management and digital manufacturing

    Leino, S-P., Jokinen, L., Anttila, J-P. & Pulkkinen, A., 2015, IFIP Advances in Information and Communication Technology. Springer New York LLC, Vol. 467. p. 591-600 10 p. (IFIP Advances in Information and Communication Technology; vol. 467).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Case study on the relation of PLM maturity, architecture and business processes

    Pulkkinen, A., Vainio, V. & Rissanen, N., 2013, Product Lifecycle Management for Society, Proceedings of 10th IFIP WG 5.1 International conference, PLM 2013, Nantes, France, July 6-10, 2013,. Bernard, A., Rivest, L. & Dutta, D. (eds.). Berlin: Springer, p. 432-438 7 p. (IFIP Advances in Information and Communication Technology; vol. 409).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Categorization of ITER remote handling operations

    Salminen, K., Aha, L., Saarinen, H., Siuko, M., Mattila, J. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2075-2077

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Cavitation erosion resistance assessment and comparison of three francis turbine runner materials

    Ylönen, M., Saarenrinne, P., Miettinen, J., Franc, J-P., Fivel, M. & Nyyssönen, T., 26 Oct 2018, In : Materials Performance and Characterization. 7, 5, p. 1107-1126 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    CFD Based Modelling for Predicting Fouling and Corrosion in Kraft Recovery Boilers

    Leppänen, A., Välimäki, E. & Oksanen, A., 2011, 19th European Biomass Conference and Exhibition, 6-10 June 2011, Berlin Germany. Berlin: European Biomass Conference and Exhibition, p. 1033-1040 (European Biomass Conference and Exhibition).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    CFD based on-line process analysis - applied to circulating and bubbling fluidized bed processes

    Kallio, S., Saarenrinne, P., Peltola, J., Tähtinen, M., Saxén, H., Kärkkäinen, T., Niemi, T., Karvonen, L., Nevalainen, H., Elfvengren, J., Kolehmainen, J., Hermanson, A., Mondal, D. & Maslov, A., 2014, Espoo: VTT. 43 p. (Research report VTT-R; no. 04576-14)

    Research output: Book/ReportCommissioned reportProfessional

  50. Published

    CFD-Modeling of Fume Formation in Kraft Recovery Boilers

    Leppänen, A., Välimäki, E., Oksanen, A. & Tran, H., 2012, TAPPI PEERS Conference Proceedings 14.-18.10.2012, Savannah, USA. TAPPI, (TAPPI PEERS Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.