Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    Halogen bonding stabilizes a cis-azobenzene derivative in the solid state: A crystallographic study

    Saccone, M., Siiskonen, A., Fernandez-Palacio, F., Priimägi, A., Terraneo, G., Resnati, G. & Metrangolo, P., 1 Apr 2017, In : ACTA CRYSTALLOGRAPHICA SECTION B : STRUCTURAL SCIENCE, CRYSTAL ENGINEERING AND MATERIALS. 73, 2, p. 227-233 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  2. Published

    Guanidinium Pairing Facilitates Membrane Translocation

    Allolio, C., Baxova, K., Vazdar, M. & Jungwirth, P., 14 Jan 2016, In : Journal of Physical Chemistry Part B. 120, 1, p. 143-153 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    Gas atomized thermal spray powders of various metals and alloys

    Lagerbom, J., Ritvonen, T., Suhonen, T. & Varis, T., 2011, Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2011. European Powder Metallurgy Association (EPMA), Vol. 2.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Formation mechanisms, structure, and properties of HVOF-sprayed WC-CoCr coatings: An approach toward process maps

    Varis, T., Suhonen, T., Ghabchi, A., Valarezo, A., Sampath, S., Liu, X. & Hannula, S. P., 2014, In : Journal of Thermal Spray Technology. 23, 6, p. 1009-1018 10 p.

    Research output: Contribution to journalReview ArticleScientificpeer-review

  5. Published

    Fluorine losses in Er3+oxyfluoride phosphate glasses and glass-ceramics

    Szczodra, A., Mardoukhi, A., Hokka, M., Boetti, N. G. & Petit, L., 15 Aug 2019, In : Journal of Alloys and Compounds. 797, p. 797-803 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    Fluorimetric oxygen sensor with an efficient optical read-out for in vitro cell models

    Välimäki, H., Verho, J., Kreutzer, J., Kattipparambil Rajan, D., Ryynänen, T., Pekkanen-Mattila, M., Ahola, A., Tappura, K., Kallio, P. & Lekkala, J., 1 Oct 2017, In : Sensors and Actuators B: Chemical. 249, p. 738-746 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Flip-chip Wafer-fused OP-VECSELs emitting 3.65 W at the 1.55-μm waveband

    Mereuta, A., Nechay, K., Caliman, A., Suruceanu, G., Rudra, A., Gallo, P., Guina, M. & Kapon, E., 2019, In : IEEE Journal of Selected Topics in Quantum Electronics. 25, 6

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    First principles prediction of the solar cell efficiency of chalcopyrite materials  AgMX2(M=In, Al; X=S, Se, Te)

    Dongho-Nguimdo, G. M., Igumbor, E., Zambou, S. & Joubert, D. P., 1 Dec 2019, In : Computational Condensed Matter. 21, e00391.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Fabrication and Characterization of Amorphous Alumina-Yttria-Stabilized Zirconia Coatings by Air Plasma Spraying

    Song, X., Suhonen, T., Varis, T., Huang, L., Zheng, X. & Zeng, Y., 25 Nov 2014, In : Journal of Thermal Spray Technology. 23, 8, p. 1302-1311 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Exploring the role of stearic acid in modified zinc aluminum layered double hydroxides and their acrylonitrile butadiene rubber nanocomposites

    Eshwaran, S. B., Basu, D., Vaikuntam, S. R., Kutlu, B., Wiessner, S., Das, A., Naskar, K. & Heinrich, G., 1 Mar 2015, In : Journal of Applied Polymer Science. 132, 9, 41539.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Exciton localization and structural disorder of GaAs1-xBix/GaAs quantum wells grown by molecular beam epitaxy on (311)B GaAs substrates

    Prando, G. A., Orsi Gordo, V., Puustinen, J., Hilska, J., Alghamdi, H. M., Som, G., Gunes, M., Akyol, M., Souto, S., Rodrigues, A. D., Galeti, H. V. A., Henini, M., Gobato, Y. G. & Guina, M., 17 Jul 2018, In : Semiconductor Science and Technology. 33, 8, 084002.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Evaluation of Residual Stresses and Their Influence on Cavitation Erosion Resistance of High Kinetic HVOF and HVAF-Sprayed WC-CoCr Coatings

    Varis, T., Suhonen, T., Laakso, J., Jokipii, M. & Vuoristo, P., 2020, In : Journal of Thermal Spray Technology. 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Evaluation of crushing strength of spray-dried MgAl2O4 granule beds

    Kanerva, U., Suhonen, T., Lagerbom, J. & Levänen, E., 1 Aug 2015, In : Ceramics International. 41, 7, p. 8494-8500 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Evaluating the toughness of APS and HVOF-sprayed Al2O3-ZrO2-coatings by in-situ- and macroscopic bending

    Kiilakoski, J., Musalek, R., Lukac, F., Koivuluoto, H. & Vuoristo, P., 2018, In : Journal of the European Ceramic Society. 38, 4, p. 1908-1918

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Erosive wear of various stainless steel grades used as impeller blade materials in high temperature aqueous slurry

    Lindgren, M., Suihkonen, R. & Vuorinen, J., 5 Apr 2015, In : Wear. 328-329, p. 391-400 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Erosive wear of filled vinylester composites in water and acidic media at elevated temperature

    Sarlin, E., Saarimäki, M., Sironen, R., Lindgren, M., Siljander, S., Kanerva, M. & Vuorinen, J., 15 Nov 2017, In : Wear. 390-391, p. 84-92 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Erosion wear performance of WC-10Co4Cr and Cr3C2-25NiCr coatings sprayed with high-velocity thermal spray processes

    Matikainen, V., Rubio Peregrina, S., Ojala, N., Koivuluoto, H., Schubert, J., Houdková & Vuoristo, P., 25 Jul 2019, In : Surface and Coatings Technology. 370, p. 196-212 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Erosion wear of vinylester matrix composites in aqueous and acidic environments at elevated temperatures

    Suihkonen, R., Lindgren, M., Siljander, S., Sarlin, E. & Vuorinen, J., 15 Jul 2016, In : Wear. 358-359, p. 7-16 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Erosion–corrosion resistance of various stainless steel grades in high-temperature sulfuric acid solution

    Lindgren, M., Siljander, S., Suihkonen, R., Pohjanne, P. & Vuorinen, J., 15 Oct 2016, In : Wear. 364-365, p. 10-21 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Equipment for obtaining polimeric nanofibres by electrospinning technology: II. The obtaining of polimeric nanofibers

    Manea, L. R., Cramariuc, B., Popescu, V., Cramariuc, R., Sandu, I. & Cramariuc, O., 1 Jun 2015, In : Materiale Plastice. 52, 2, p. 180-185 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    Epitaxial phases of high Bi content GaSbBi alloys

    Hilska, J., Koivusalo, E., Puustinen, J., Suomalainen, S. & Guina, M., 15 Jun 2019, In : Journal of Crystal Growth. 516, p. 67-71 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Entrapped Styrene Butadiene Polymer Chains by Sol-Gel-Derived Silica Nanoparticles with Hierarchical Raspberry Structures

    Vaikuntam, S. R., Stöckelhuber, K. W., Subramani Bhagavatheswaran, E., Wießner, S., Scheler, U., Saalwächter, K., Formanek, P., Heinrich, G. & Das, A., 15 Feb 2018, In : Journal of Physical Chemistry B. 122, 6, p. 2010-2022 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Enhanced thermal stability of polychloroprene rubber composites with ionic liquid modified MWCNTs

    Subramaniam, K., Das, A., Häußler, L., Harnisch, C., Stöckelhuber, K. W. & Heinrich, G., May 2012, In : Polymer Degradation and Stability. 97, 5, p. 776-785 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. E-pub ahead of print

    Energy dissipation in natural rubber latex films: The effect of stabilizers, leaching and acetone-treatment

    Shakun, A., Sarlin, E. & Vuorinen, J., 2020, In : Journal of Applied Polymer Science. 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Energetic origin of proton affinity to the air/water interface

    Takahashi, H., Maruyama, K., Karino, Y., Morita, A., Nakano, M., Jungwirth, P. & Matubayasi, N., 28 Apr 2011, In : Journal of Physical Chemistry Part B. 115, 16, p. 4745-4751 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Electronic transport in n-type modulation-doped AlGaAs/GaAsBi quantum well structures: Influence of Bi and thermal annealing on electron effective mass and electron mobility

    Donmez, O., Aydin, M., Ardali, Yildirim, S., Tiraş, E., Nutku, F., Cetinkaya, C., okduygulular, E., Puustinen, J., Hilska, J., Guina, M. & Erol, A., 2020, In : Semiconductor Science and Technology. 35, 2, 025009.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Electromagnetic nonlinearities in a Roebel-cable-based accelerator magnet prototype: Variational approach

    Ruuskanen, J., Stenvall, A., Lahtinen, V. & Pardo, E., 1 Feb 2017, In : Superconductor Science and Technology. 30, 2, 024008.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    Electromagnetic interference shielding effectiveness of MWCNT filled poly(ether sulfone) and poly(ether imide) nanocomposites

    Mohanty, A. K., Ghosh, A., Sawai, P., Pareek, K., Banerjee, S., Das, A., Pötschke, P., Heinrich, G. & Voit, B., 1 Nov 2014, In : Polymer Engineering and Science. 54, 11, p. 2560-2570 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    Elastomer composites based on carbon nanotubes and ionic liquid

    Subramaniam, K., Das, A., Stöckelhuber, K. W. & Heinrich, G., 2013, In : Rubber Chemistry and Technology. 86, 3, p. 367-400 34 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    Efficient surface structuring and photoalignment of supramolecular polymer-azobenzene complexes through rational chromophore design

    Vapaavuori, J., Valtavirta, V., Alasaarela, T., Mamiya, J. I., Priimagi, A., Shishido, A. & Kaivola, M., 21 Oct 2011, In : Journal of Materials Chemistry. 21, 39, p. 15437-15441 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Efficient photon upconversion at remarkably low annihilator concentrations in a liquid polymer matrix: when less is more

    Durandin, N. A., Isokuortti, J., Efimov, A., Vuorimaa-Laukkanen, E., Tkachenko, N. V. & Laaksonen, T., 2018, In : Chemical Communications. 54, 99, p. 14029-14032 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    Effects of composition and microstructure on the abrasive wear performance of quenched wear resistant steels

    Ojala, N., Valtonen, K., Heino, V., Kallio, M., Aaltonen, J., Siitonen, P. & Kuokkala, V. T., 15 Sep 2014, In : Wear. 317, 1-2, p. 225-232 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    Effect of the addition of Al2O3, TiO2 and ZnO on the thermal, structural and luminescence properties of Er3+-doped phosphate glasses

    Lopez-Iscoa, P., Petit, L., Massera, J., Janner, D., Boetti, N. G., Pugliese, D., Fiorilli, S., Novara, C., Giorgis, F. & Milanese, D., 15 Mar 2017, In : Journal of Non-Crystalline Solids. 460, p. 161-168 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    Effect of tempering on the impact-abrasive and abrasive wear resistance of ultra-high strength steels

    Haiko, O., Valtonen, K., Kaijalainen, A., Uusikallio, S., Hannula, J., Liimatainen, T. & Kömi, J., 15 Dec 2019, In : Wear. 440-441

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Effect of surface morphology of poly(ïμ-caprolactone) scaffolds on adipose stem cell adhesion and proliferation

    Diban, N., Haimi, S. P., Bolhuis-Versteeg, L., Teixeira, S., Miettinen, S., Poot, A. A., Grijpma, D. W. & Stamatialis, D., Dec 2013, In : Macromolecular symposia. 334, 1, p. 126-132 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    Effect of spraying parameters on the microstructural and corrosion properties of HVAF-sprayed Fe-Cr-Ni-B-C coatings

    Milanti, A., Matikainen, V., Koivuluoto, H., Bolelli, G., Lusvarghi, L. & Vuoristo, P., 15 Sep 2015, In : Surface and Coatings Technology. 277, p. 81-90 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    Effect of sol-gel derived in situ silica on the morphology and mechanical behavior of natural rubber and acrylonitrile butadiene rubber blends

    Kapgate, B. P., Das, C., Das, A., Basu, D., Reuter, U. & Heinrich, G., Sep 2012, In : JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY. 63, 3, p. 501-509 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    Effect of silane integrated sol-gel derived in situ silica on the properties of nitrile rubber

    Kapgate, B. P., Das, C., Basu, D., Das, A., Heinrich, G. & Reuter, U., 5 Aug 2014, In : Journal of Applied Polymer Science. 131, 15, 40531.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    Effect of rubber polarity on selective wetting of carbon nanotubes in ternary blends

    Le, H. H., Parsaker, M., Sriharish, M. N., Henning, S., Menzel, M., Wießner, S., Das, A., Do, Q. K., Heinrich, G. & Radusch, H. J., 1 Nov 2015, In : Express Polymer Letters. 9, 11, p. 960-971 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    Effect of rheological properties of dissolved cellulose/microfibrillated cellulose blend suspensions on film forming

    Saarikoski, E., Rissanen, M. & Seppälä, J., 30 Mar 2015, In : Carbohydrate Polymers. 119, p. 62-70 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Effect of prior austenite grain size on the abrasive wear resistance of ultra-high strength martensitic steels

    Haiko, O., Javaheri, V., Valtonen, K., Kaijalainen, A., Hannula, J. & Kömi, J., 15 Aug 2020, In : Wear. 454-455, 203336.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Effect of Phosphatidic Acid on Biomembrane: Experimental and Molecular Dynamics Simulations Study

    Kwolek, U., Kulig, W., Wydro, P., Nowakowska, M., Róg, T. & Kepczynski, M., 6 Aug 2015, In : Journal of Physical Chemistry Part B. 119, 31, p. 10042-10051 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  43. Published

    Effect of nozzle geometry on the microstructure and properties of hvaf-sprayed wc-10co4cr and cr3c2-25nicr coatings

    Matikainen, V., Koivuluoto, H., Vuoristo, P., Schubert, J. & Houdková, 1 Apr 2018, In : Journal of Thermal Spray Technology. 27, 4, p. 680-694 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    Effect of non-rubber components of NR on the carbon nanotube (CNT) localization in SBR/NR blends

    Le, H. H., Parsekar, M., Ilisch, S., Henning, S., Das, A., Stöckelhuber, K. W., Beiner, M., Ho, C. A., Adhikari, R., Wießner, S., Heinrich, G. & Radusch, H. J., 2014, In : Macromolecular Materials and Engineering. 299, 5, p. 569-582 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Published

    Effect of melting state on the thermal shock resistance and thermal conductivity of APS ZrO2-7.5wt.% Y2O3 coatings

    Song, X., Liu, Z., Suhonen, T., Varis, T., Huang, L., Zheng, X. & Zeng, Y., 25 May 2015, In : Surface and Coatings Technology. 270, p. 132-138 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Effect of incorporation of CdS NPs on performance of PTB7: PCBM organic solar cells

    Sharma, R., Bhalerao, S. & Gupta, D., 1 Jun 2016, In : Organic Electronics: physics, materials, applications. 33, p. 274-280 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Effect of heat-treatment on the upconversion of NaYF4:Yb3+, Er3+ nanocrystals containing silver phosphate glass

    Ojha, N., Bogdan, M., Galatus, R. & Petit, L., 15 Sep 2020, In : Journal of Non-Crystalline Solids. 544, 120243.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    Effect of head group size on the photoswitching applications of azobenzene Disperse Red 1 analogues

    Goulet-Hanssens, A., Corkery, T. C., Priimagi, A. & Barrett, C. J., 28 Sep 2014, In : Journal of Materials Chemistry C. 2, 36, p. 7505-7512 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Effect of carbon nanotubes and nanodiamonds on the heat storage ability of natural rubber composites

    Poikelispää, M., Honkanen, M., Vippola, M. & Sarlin, E., 2020, In : Journal of Elastomers and Plastics. 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    DNA lesion can facilitate base ionization: Vertical ionization energies of aqueous 8-oxoguanine and its nucleoside and nucleotide

    Palivec, V., Pluharová, E., Unger, I., Winter, B. & Jungwirth, P., 4 Dec 2014, In : Journal of Physical Chemistry Part B. 118, 48, p. 13833-13837 5 p.

    Research output: Contribution to journalArticleScientificpeer-review