Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    Challenge of teaching TRIZ for university students

    Ryynänen, L. E. & Riitahuhta, A., 2010, Proceedings of The 10th ETRIA World Triz Future Conference 2010, 3-5- November, 2010, Bergamo, Italy. Rizzi, C. (ed.). Bergamo University Press, p. 323-324

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  2. Published

    Challenges and opportunities in capturing design knowledge

    Lehtonen, T., Halonen, N., Pakkanen, J., Juuti, T. & Huhtala, P., 2016, Proceedings of the 10th World Congress on Engineering Asset Management (WCEAM 2015). Springer International Publishing, p. 389-395 8 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Challenges of Knowledge and Information Management during New Product Introduction: Experiences from a Finnish Multinational Company

    Järvenpää, E., Kopra, M-J. & Lanz, M., 2016, In : Interdisciplinary Journal of Information, Knowledge, and Management. 11, p. 285 308 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Champion tools: The facilitator's handbook

    Juuti, T., Kopra, M-J., Lehtonen, T., Tuokko, R. & Lanz, M., 2015, Tampere: Tampere University of Technology. Department of Mechanical Engineering and Industrial Systems. 68 p.

    Research output: Book/ReportBookProfessional

  5. Published

    Champion-työkalut: Fasilitoijan ohjeet. Mestariluokan työkalut hankkeiden valmisteluun ja toteuttamiseen

    Juuti, T., Kopra, M-J., Halonen, N. & Tapaninaho, M., 2014, Tampere: Tampereen teknillinen yliopisto. Kone- ja tuotantotekniikan laitos. 80 p.

    Research output: Book/ReportBookProfessional

  6. Published

    Characterising the industrial context of engineering change management

    Pulkkinen, A., Huhtala, P., Leino, S-P., Anttila, J. P. & Vainio, V. V., 2016, Product Lifecycle Management in the Era of Internet of Things: 12th IFIP WG 5.1 International Conference, PLM 2015, Doha, Qatar, October 19-21, 2015, Revised Selected Papers. Springer New York LLC, p. 618-627 10 p. (IFIP Advances in Information and Communication Technology; vol. 467).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Characteristics of digital hydraulic pressure reducing valve

    Lähteenmäki, T., Ijas, M. & Mäkinen, E., 2010, Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK. Johnston, D. N. & Plummer, A. R. (eds.). p. 69-82

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Characterization of cracks formed in large flat-on-flat fretting contact

    Juoksukangas, J., Nurmi, V., Hintikka, J., Vippola, M., Lehtovaara, A., Mäntylä, A., Vaara, J. & Frondelius, T., Jul 2019, In : International Journal of Fatigue. 124, p. 361-370 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Characterization of the cutting parameters in comparison to the machine tool input power

    Ikkala, K., Kiviö, J., Mokhtarian, H. & Coatanea, E., 2016, 26th International Conference on Flexible Automation and Inteligent Manufacturing, FAIM 2016, KSTC Seoul.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  10. Published

    CHT-12: Combined numerical and analytical method for fin array heat transfer

    Karvinen, R. & Lampio, K., 2012, ICHMT International Symposium on Advances in Computational Heat Transfer, CHT-12, 1-6 July 2012, Bath, England. Begell House, (Advances in Computational Heat Transfer).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Clean Components of Fluid Power System Reduce Maintenance Costs

    Rinkinen, J. & Elo, L., 1 Oct 2015, Maintenance, Condition Monitoring and Diagnostics; Maintenance Performance Measurement and Management: MCMD 2015 and MPMM 2015. 8 p. 2 (2015-10-01)

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  12. Published

    Closing the Gap – Improving Production Control with a New Layer of Decision Making

    Toivonen, V., Järvenpää, E. & Lanz, M., 2016, Proceedings of the 26th International conference on Flexible Automation and Intelligent Manufacturing (FAIM2016). p. 1042-1049 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  13. Published

    Cloud based solution enabling collaborative supply network optimization for an original equipment manufacturer

    Xu, X., Nieto, A., Ramis Ferrer, B., Camp, R. & Martinez Lastra, J. L., Jul 2016, 2016 IEEE 14th International Conference on Industrial Informatics (INDIN). IEEE, p. 689-694 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Clustering Analysis for Secondary Breaking Using a Low-Cost Time-of-Flight Camera

    Niu, L., Aref, M. M. & Mattila, J., Nov 2018, 2018 Ninth International Conference on Intelligent Control and Information Processing (ICICIP). IEEE, p. 318-324 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Coal char combustion under chemical kinetics controlled conditions

    Rodriguez Avila, M., Tolvanen, H., Siitonen, T. & Raiko, R., 2010, International Conference on Applied Energy (ICAE 2010), Energy Solutions for a Sustainable World, 21-23 April 2010, Singapore. p. 459-468

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  16. Published

    CO-Based Outdoor Smart Lighting for Energy Aware Factory

    Florea, A., Farahat, A., Postelnicu, C., Martinez Lastra, J. L. & Azcondo Sánchez, F. J., 2014, Internet of Things Based on Smart Objects. Fortino, G. & Trunfio, P. (eds.). Springer International Publishing, p. 69-83 15 p. (Internet of Things).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  17. Published

    Collaboration between design and production by exploiting VR/AR and PLM - case Metso Minerals

    Leino, S-P., Vehviläinen, M., Kiviranta, S., Mäkiranta, A., Nuutinen, P., Hokkanen, I., Multanen, P., Rantanen, P., Heikkilä, J. & Martikainen, T., 2010, Proceedings of the 3rd International Conference on Applied Human Factors and Ergonomics (AHFE), 17-20 July 2010, Miami, Florida, USA. Karwowski, W. & Salvendy, G. (eds.). p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Collaborative Innovation Capabilities of SME Network

    Majuri, M., Halme, J., Kopra, M-J. & Nylund, H., 2015, Proceedings of the 25th international conference on flexible automation and intelligent manufacturing: FAIM2015, 23rd-26th June, 2015 Wolverhampton, UK. Vol. Vol. 2. p. 404-409 6 p. 175

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Collaborative Systems and Environments for Future Working Life: Towards the Integration of Workers, Systems and Manufacturing Environments

    Hämäläinen, R., Lanz, M. & Koskinen, K. T., 2017, The Impact of Digitalization in the Workplace: An Educational View. Springer, p. 25-38 13 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  20. Published

    Collapse Simulations of Flexible Multibody Systems

    Mäkinen, J., 2011, Proceedings of the 24th Nordic Seminar on Computational Mechanics. Aalto University publication series. SCIENCE + TECHNOLOGY. Freund, J. & Kouhia, R. (eds.). Espoo: Aalto University, p. 221-222 (Nordic Seminar on Computational Mechanics; vol. 23/2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  21. Published

    Combined continuum damage-embedded discontinuity model for explicit dynamic fracture analyses of quasi-brittle materials

    Saksala, T., Brancherie, D., Harari, I. & Ibrahimbegovic, A., 2015, In : International Journal for Numerical Methods in Engineering. 101, 3, p. 230-250 21 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Combined Virtual Iron Bird and Hardware-in-the-Loop Simulation Research Environment for Jet Fighter Hydraulic Systems

    Alarotu, V., Aaltonen, J., Koskinen, K. T. & Siitonen, M., 2013, Proceedings of the 4th CEAS Conference in Linköping, 2013. Melin, T., Krus, P., Vinterhav, E. & Övrebö, K. (eds.). Linköping: Linköping University Electronic Press, p. 196-202 7 p. (International Conference of the European Aerospace Societies; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Combining Method of Alternating Projections and Augmented Lagrangian for Task Constrained Trajectory Optimization

    Singh, A. K., Ghabcheloo, R., Muller, A. & Pandya, H., 1 Oct 2018, 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). IEEE, p. 7568-7575 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Comfort Design in Human Robot Cooperative Tasks

    Changizi, A., Dianatfar, M. & Lanz, M., 2019, Human Systems Engineering and Design - Proceedings of the 1st International Conference on Human Systems Engineering and Design IHSED2018: Future Trends and Applications. Springer Verlag, p. 521-526 6 p. (Advances in Intelligent Systems and Computing; vol. 876).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Command and Control application framework for interoperable heterogeneous ITER Remote Handling devices

    Tuominen, J., Muhammad, A., Mattila, J., Aha, L., Saarinen, H., Siuko, M., Hamilton, D. & Semerero, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2067-2070

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Comparative environmental impacts of additive and subtractive manufacturing technologies

    Paris, H., Mokhtarian, H., Coatanéa, E., Museau, M. & Ituarte, I. F., 2016, In : CIRP Annals: Manufacturing Technology. 65, 1, p. 29-32

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Comparison between an aircraft speed brake actuator high order linear model and a semi-empirical non-linear model in real time simulation

    Hietala, J-P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2011, AST 2011, 3rd International Workshop on Aircraft System Technologies, March 31 - April 1, 2011, Hamburg, Germany. Hamburg: Hamburg University of Technology, p. 65-71 (International Workshop on Aircraft System Technologies AST; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Comparison of five low cost manipulators for microfactories

    Siltala, N., Vuola, A., Prusi, T., Heikkilä, R. & Tuokko, R., 2012, Proceedings of the 8th International Workshop on Microfactories, IWMF 2012, 18-20 June, 2012, Tampere Hall, Tampere, Finland. Reijo, T., Minna, L. & Pasi, L. (eds.). Tampere: Tampere University of Technology, p. 1-8 8 p. (International Workshop on MicroFactories).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Comparison of in-vivo digital image correlation and tissue doppler analyses of right ventricle strains

    Soltani, A., Lahti, J., Curtze, S., Laurikka, J., Hokka, M. & Kuokkala, V-T., 2018.

    Research output: Other conference contributionPaper, poster or abstractScientific

  30. Published

    Comparison of low-and high-fidelity approach in model based design in the case of a portable motion platform

    Ellman, A. U., Krus, P. & Jouppila, V., 2013, Proceedings of the 19th International Conference on Engineering Design, ICED13, Design for Harmonies, Vol 9: Design Methods and Tools, 19th-22nd August 2013, Sungkyunkwan University, Seoul, Korea. Lindemann, U., Venkataraman, S., Kim, Y. S., Lee, S. W., Papalambros, P. & Chen, W. (eds.). Scotland: The Design Society, p. 227-236 10 p. (International Conference on Engineering Design).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Comparison of measured and predicted dynamic properties of different commercial hydraulic fluids

    Karjalainen, J-P., Karjalainen, R., Huhtala, K. & Vilenius, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 281-296 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Comparison of proportional control and displacement control using digital hydraulic power management system

    Heikkilä, M., Karvonen, M., Linjama, M., Tikkanen, S. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Comparison of slipper structures in water hydraulic axial piston pump

    Rokala, M. & Koskinen, K. T., 2010, 6th FPNI-PhD Symposium, June 15-19, 2010, West Lafayette, USA.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Competence needs and a model for the teaching strategy development of mechanical designers in product development

    Nevaranta, J., 31 Oct 2014, Tampere: Tampere University of Technology. 141 p. (Tampere University of Technology, Publication; vol. 1245)

    Research output: Book/ReportDoctoral thesisMonograph

  35. Published

    Complex elevator system DSM-case for a DSM design sprint

    Niutanen, V., Hölttä-Otto, K., Rahardjo, A., Stowe, H. M., Helo, P. & Pulkkinen, A., 2017, Understand, Innovate, and Manage your Complex System! - Proceedings of the 19th International DSM Conference. The Design Society, p. 259-264 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Comportamiento Dinámico en Tracción a Alta Temperatura De Titanio Ensayado Por Dos Métodos Distintos

    Hueto, F., Sancho, R., Hokka, M. & Galvez, F., 2017, Grupo Español de Fractura.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  37. Published

    Compression model for radial compression of Norway spruce earlywood and latewood

    Moilanen, C., Björkqvist, T. & Saarenrinne, P., 19 May 2015, 9th International Mechanical Pulping Research Seminar. Trondheim, Norway

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  38. Published

    Computational modelling of high-cycle fatigue using a continuum based model

    Holopainen, S., Kouhia, R., Könnö, J. & Saksala, T., 2015, Proceedings of the NSCM28: 28th Nordic Seminar on Computational Mechanics, October 22 – 23, 2015, Tallinn, Estonia. p. 71-74 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  39. Published

    Computational modelling of transversely isotropic high-cycle fatigue using a continuum based model

    Holopainen, S., Kouhia, R., Könnö, J. & Saksala, T., 2016, 21st European Conference on Fracture, ECF21, 20-24 June 2016, Catania, Italy. p. 2718–2725 8 p. (Procedia Structural Integrity; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Computer-Assisted Bilateral Teleoperation System for Water Hydraulic Manipulator

    Viinikainen, M., Mattila, J. & Tuominen, J., 2013, The 8th International Conference on Fluid Power Transmission and Control, ICFP 2013, April 9-11, 2013, Zhejiang University, Hangzhou, China. Yongxiang, L., Qingfeng, W., Bingfeng, J. & Jun, Z. (eds.). p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Concept design of the cassette toroidal mover

    Mäkinen, H., Järvenpää, J., Valkama, P., Väyrynen, J., Amjad, F., Siuko, M., Mattila, J., Semeraro, L. & Esque, S., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2092-2095

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Concept design of the DEMO divertor cassette-to-vacuum vessel locking system adopting a systems engineering approach

    Di Gironimo, G., Carfora, D., Esposito, G., Lanzotti, A., Marzullo, D. & Siuko, M., May 2015, In : Fusion Engineering and Design. 94, p. 72-81 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  43. Published

    Concept of product development simulator for an excavator using a haptic device

    El Dirdiry, O. & Ellman, A., 2013, Proceedings of the 19th International Conference on Engineering Design, ICED13, Design for Harmonies, Vol 9: Design Methods and Tools, 19th-22nd August 2013, Sungkyunkwan University, Seoul, Korea. Lindemann, U., Venkataraman, S., Yong, S., Lee, S. W., Papalambros, P. & Chen, W. (eds.). Scotland: The Design Society, p. 031-038 8 p. (International Conference on Engineering Design).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Concept of the electro-water-hydraulic hybrid mobile machine

    Aaltonen, J., Sairiala, H. & Koskinen, K. T., 2012, Topic water hydraulics, Dutch Fluid Power Conference, Ede, The Netherlands 13th September 2012. p. 97-111 15 p. (Dutch Fluid Power Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  45. Published

    Concepts, methods and tools for individualized production

    Lanz, M. & Tuokko, R., 1 Apr 2017, In : PRODUCTION ENGINEERING. 11, 2, p. 205-212 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Concerns over students role as test users in virtual environments

    Tiainen, T. & Ellman, A., 2014, Proceedings of the 18th Academic MindTrek Conference 2014 "Media business, management, content & services" 4-6 November, 2014, Tampere, Finland. Lugmayr, A., Franssila, H. & Paavilainen, J. (eds.). New York, NY: The Association for Computing Machinery, p. 11-18 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Condition monitoring and in-line maintenance of oil in circulating lubrication system

    Rinkinen, J., 2010, Proceedings of the 3rd International Seminar Maintenance, Condition Monitoring and Diagnostics, September 29-30, 2010, Pohto, Oulu, Finland. Lahdelma, S. & Palokangas, K. (eds.). p. 136-151

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Condition monitoring for distributed systems with reconfigurable user interfaces and data permissions

    Jokinen, J., Bose Ambat, M. & Martinez Lastra, J. L., 2016, Proceedings of IEEE 42nd Annual Conference on IEEE Industrial Electronics Society. IEEE

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Condition monitoring for predictive maintenance in the pulp & paper industry: two implementions

    Jokinen, J., Postelnicu, C., Zhang, B., Camp, R., Suhonen, M., Karhumäki, O. & Martinez Lastra, J. L., 2012, Proceedings of 2012 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2012, 14-17 October, 2012, COEX, Seoul, Korea. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 1633-1638 (IEEE International Conference on Systems, Man and Cybernetics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Configurator module to integrate different protocols for IoT solution

    Mahmoodpour, M., Lobov, A. & Lanz, M., Jul 2018, 2018 IEEE 16th International Conference on Industrial Informatics (INDIN): 18-20 July 2018, Porto, Portugal. IEEE, p. 67-73 7 p. (IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL INFORMATICS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.