Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    EU:n tutkimuksen seitsemäs puiteohjelma (2007-2013) tarjoaa rahoitusmahdollisuuksia kappaletavarateollisuudelle

    Tuokko, R., 2007, In : Sisua! - Tekesin SISU 2010 -teknologiaohjelman tiedotuslehti. 1, p. 10-11

    Research output: Contribution to journalArticleProfessional

  2. Published

    Eurooppa satsaa valmistavan teollisuuden tulevaisuuteen - Tartutaan tilaisuuteen ja otetaan hyöty irti!

    Tuokko, R., 2007, In : Teknologiateollisuuden sidosryhmälehti VISIO. 1, p. s. 32

    Research output: Contribution to journalArticleProfessional

  3. Published

    Evaluating the confidence level of prognostic predictions

    Lumme, V. & Pylvänen, M., 2012, 2012 IEEE Conference on Prognostics and Health Management PHM, 18-21 June 2012, Denver, CO, USA. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 1-6 6 p. (IEEE International Conference on Prognostics and Health Management).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Evaluating the structural complexity of a product family

    Rissanen, N., Malmqvist, J. & Pulkkinen, A., 2012, The 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Dorian, M., Mario, S., Neven, P. & Nenad, B. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, p. 1597-1604 (International Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Evaluation of lubrication conditions in gear contacts using contact resistance and bulk temperature measurements

    Kleemola, J. & Lehtovaara, A., 2010, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 224, 4, p. 367-375

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    Evaluation of the teaching of a simple theory through different teaching disciplines

    Saarenrinne, P., 2012, ICERI2012 Proceedings, 5th International Conference of Education, Research and Innovation 19.-21.11.2012, Madrid, Spain. Barcelona: International Association of Technology, Education and Development IATED, p. 939-942 (International Conference of Education, Research and Innovation).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Evidence against a correlation between ease of use and actual use of a device in a walk-in virtual environment

    Tiainen, T., Ellman, A. & Kaapu, T., 2013, In : Human Technology: An Interdisciplinary Journal on Humans in ICT Environments Human Technology. 9, 1, p. 56-71 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    Evolution equations based approach for modeling of fatigue in amorphous glassy polymers. On the investigation of fatigue damage development in polycarbonate

    Holopainen, S., 2016, Proc. of VII European Congress on Computational Methods in Applied Sciences and Engineering , ECCOMAS Congress 2016. : M. Papadrakakis, V. Papadopoulos, G. Stefanou, V. Plevris (eds.) . Crete Island, Greece, 5 – 10 June 2016. Papadrakakis, M., Papadopoulos, V., Stefanou, G. & Plevris, V. (eds.). p. 6675-6687 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Evolvable micro production systems: specific needs and differences to macro

    Hofmann, A., Bretthauer, G., Siltala, N. & Tuokko, R., 2011, IEEE International Symposium on Assembly and Manufacturing, ISAM 2011, 25-27 May, 2011, Tampere Hall, Tampere, Finland. Piscataway, NJ: IEEE, p. 1-6 6 p. (IEEE International Symposium on Assembly and Manufacturing ISAM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Examples of technical cleanliness of fluid power components

    Kuosku, M., Pekkonen, J. & Rinkinen, J., 2013, The Tenth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM2013/MFPT2013, 18-20 June 2013, Krakow, Poland. Coxmoor Publishing, p. 1-12 12 p. (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Exercise loading history and femoral neck strength in a sideways fall: A three-dimensional finite element modeling study.

    Abe, S., Narra, N., Nikander, R., Hyttinen, J., Kouhia, R. & Sievänen, H., 2016, In : Bone. 92, p. 9-17 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Experiences of monitoring the condition of military aircraft hydraulic systems

    Virta, P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2010, In : Condition Monitor. 280, p. 9-14

    Research output: Contribution to journalArticleProfessional

  13. Published

    Experiences of Online Measurements in Technical Cleanliness of Fluid Power System

    Elo, L., Pekkonen, J. & Rinkinen, J., 2013, The Tenth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM2013/MFPT2013, 18-20 June 2013, Krakow, Poland. Coxmoor Publishing, p. 1-9 9 p. (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Experimental and numerical study of a choke valve in a turbulent flow

    Huovinen, M., Kolehmainen, J., Koponen, P., Nissilä, T. & Saarenrinne, P., 2015, In : Flow Measurement and Instrumentation. 45, p. 151-161 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Experimental and numerical study of a drill bit drop tests on Kuru Granite

    Fourmeau, M., Kane, A. & Hokka, M., Jan 2017, In : Philosophical Transactions of the Royal Society A: Mathematical Physical and Engineering Sciences. 375, 2085

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Experimental and numerical study of wall layer development in a tribocharged fluidized bed

    Sippola, P., Kolehmainen, J., Ozel, A., Liu, X., Saarenrinne, P. & Sundaresan, S., 25 Aug 2018, In : Journal of Fluid Mechanics. 849, p. 860-884 25 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Experimental Comparisons of Sliding Mode Controlled Pneumatic Muscle and Cylinder Actuators

    Jouppila, V., Gadsden, A. S. & Ellman, A., 2014, In : Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME. 136, 4, 10 p., 044503.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Experimental evaluation of a digital hydraulic power management system

    Heikkilä, M., Tammisto, J., Huova, M., Huhtala, K. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 129-142

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Experimental evaluation of a piston-type digital pump-motor-transformer with two independent outlets

    Heikkilä, M., Tammisto, J., Huova, M., Huhtala, K. & Linjama, M., 2010, Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK. Johnston, D. N. & Plummer, A. (eds.). p. 83-97

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Experimental investigation of the impact response of novel steelbiocomposite hybrid materials

    Ramakrishnan, K., Hokka, M., Sarlin, E., Kanerva, M., Kouhia, R. & Kuokkala, V-T., 7 Sep 2018, DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading . EDP Sciences, Vol. 183. 6 p. (EPJ WEB OF CONFERENCES).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Experimental Investigation of the Internal Heating of Metals in a Wide Range of Strain Rates Using Simultaneous Digital Image Correlation and High Speed Infrared Imaging

    Kuokkala, V-T., Smith, J., Seidt, J. & Gilat, A., 2016.

    Research output: Other conference contributionPaper, poster or abstractScientific

  22. Published

    Experimental methods for the evaluation of lubrication conditions in gear contacts

    Kleemola, J., 2010, Tampere: Tampere University of Technology. (Tmpereen teknillinen yliopisto. Julkaisu; vol. 894)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  23. Published

    Experimental results in Component Cleanliness of Fluid Power

    Rinkinen, J., Elo, L., Kuosku, M. & Pekkonen, J., 2013, The 26th International Congress of Condition Monitoring and Diagnostic Engineering Management, COMADEM 2013, 11-13 June, Helsinki. 8 p. (International Congress of Condition Monitoring and Diagnostic Engineering Management).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Experimental study on control system distribution and effects of remote control in hydraulic mobile machines

    Uusisalo, J., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Experimental study on effects of remote control and control system distribution in hydraulic mobile machines

    Uusisalo, J. & Huhtala, K., 2010, Proceedings of the Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, CERN, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Exploration of different boundary conditions in the sideways falling situation in hip fracture finite element modelling

    Abe, S., Ylinen, A., Narra Girish, N., Nikander, R., Hyttinen, J., Kouhia, R. & Sievänen, H., 2015, Proceeding of the XII Finnish Mechanics Days. Rakenteiden Mekaniikan Seura ry, p. 130-135 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  27. Published

    Exploring additive manufacturing design space using bayesian network: a case study on reducing curling defect

    Mokhtarian, H., Hamedi, A. & Coatanea, E., 11 Dec 2018, NAFEMS 2018: Exploring the Design Freedom of Additive Manufacturing through Simulation: 10-11 Dec. 2018, Helsinki. Helsinki, Finland

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Extrusion-coated sealing layers on ALD-Al2O3 coated polymer substrate: Interfacial and Adhesion properties

    Lahtinen, K., Johansson, P., Kääriäinen, T., Cameron, D. C. & Kuusipalo, J., 2012, TAPPI PLACE Conference 2012: Helping Me Do My Job Better, 6-9 May 2012, Seattle, WA, United States. p. 543-562 20 p. (TAPPI European PLACE Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. E-pub ahead of print

    Factors affecting the organizational readiness to design autonomous machine systems: Towards an evaluation framework

    Vuorimaa, V., Heikkilä, E., Karvonen, H., Koskinen, K. & Laitinen, J., 2020, Intelligent Systems and Applications - Proceedings of the 2020 Intelligent Systems Conference IntelliSys Volume 3. Arai, K., Kapoor, S. & Bhatia, R. (eds.). Springer, p. 742-747 6 p. (Advances in Intelligent Systems and Computing; vol. 1252 AISC).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Factors affecting to exploitation of modularity

    Lehtinen, J., Lehtonen, T., Juuti, T. & Riitahuhta, A., 2012, Proceedings of The Ninth Norddesign Conference 2012, 22-24 August, 2012, Aalborg, Denmark. Poul, K. H. J. R., Kaj, J. & Christian, T. (eds.). Aalborg, Denmark: Aalborg university, p. 1-10 10 p. (Norddesign conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Factory level logistics and control aspects for flexible and reactive microfactory concept

    Järvenpää, E., Heikkilä, R. & Tuokko, R., 2010, Frontiers of Assembly and Manufacturing - Selected papers from ISAM 2009. Lee, S., Suarez, R. & Choi, B-W. (eds.). Springer-Verlag Berlin Heidelberg, p. 127-140

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  32. Published

    Failure Simulations with a Strain Rate Dependent Ductile-to-Brittle Transition Model

    Hartikainen, J., Kolari, K. & Kouhia, R., 2013, Numerical Methods for Differential Equations, Optimization, and Technological Problems. Repin, S., Tiihonen, T. & Tuovinen, T. (eds.). Springer, p. 431-444 14 p. (Computational Methods in Applied Sciences; vol. 27).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  33. Published

    Fast size distribution estimation of crushed rock aggregate using laserprofilometry

    Taskinen, A., Vilkko, M., Itävuo, P. & Jaatinen, A., 2011, Preprints of the 18th IFAC World Congress, August 28 - September 2, 2011, Milano, Italy. Bittanti, S., Cenedese, A. & Zampieri, S. (eds.). Milano: IFAC, p. 12132-12137 (IFAC World Congress).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  34. Published

    Fatigue behavior of laser clad round steel bars

    Tuominen, J., Näkki, J., Poutala, J., Miettinen, J., Peltola, T., Vuoristo, P., Rasehorn, I., Alam, M. M. & Kaplan, A. F. H., 2014, In : Journal of Laser Applications. p. 1-10 10 p., 012006.

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Fatigue Lifetime Estimation of Machine Component Using Accelerated Testing

    Hietala, J-P., Ojala, P., Multanen, P., Miettinen, J. & Saarenrinne, P., 2017, ESREL 2017. CRC Press

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Fatigue properties of laser clad round steel bars

    Tuominen, J., Näkki, J., Poutala, J., Miettinen, J., Peltola, T., Vuoristo, P., Rasehorn, I., Alam, M. & Kaplan, A., 2013, Proceedings of 32nd International Congress on Applications of Lasers & Electro-Optics ICALEO, October 6-10, 2013, Miami, FL, USA. Laser Institute of America, p. 998-1007 10 p. P140. (International Congress on Applications of Lasers and Electro-Optics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Fault Tolerance with digital Hydraulic Valve System

    Siivonen, L., Linjama, M. & Vilenius, M., 2011, The Eight International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20-22 June 2011, Cardiff, Wales. Northamption: British Institute of Non-destructive Testing, p. 1250-1262 (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Fault-tolerant control of a multi-outlet digital hydraulic pump-motor

    Heikkilä, M. & Linjama, M., Mar 2018, Fluid power networks: Proceedings of the 11th International Fluid Power Conference, 19th-21st March 2018, Aachen. Murrenhoff, H. (ed.). Aachen University: RWTH Publications, Vol. 1. p. 145-157 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Fault-tolerant scheduling of stateful tasks in uniprocessor real-time systems

    Alexeev, P., Boström, P., Walden, M., Huova, M., Linjama, M. & Sere, K., 2013, 3rd International Conference on Pervasive Embedded Computing and Communication Systems, PECCS 2013, Barcelona, Spain, 19.-21.2.2013. Benavente-Peces, C. & Filipe, J. (eds.). SCITEPRESS, p. 189-194 6 p. (International Conference on Pervasive Embedded Computing and Communication Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Feature-based unfolding algorithm for sheet metal products

    Garcia, F., Lanz, M., Luostarinen, P. & Andersson, P. H., 2010, 5th International Conference on Production Research, ICPR 2010 Americas, 21-23 July, 2010, Bogotá, Colombia. p. 5 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  41. Published

    Feature Extraction and Self-Organizing Maps in Condition Monitoring of Hydraulic Systems

    Krogerus, T., 28 Jan 2011, Tampere: Tampere University of Technology. 126 p. (Tampere University of Technology. Publication; vol. 949)

    Research output: Book/ReportDoctoral thesisMonograph

  42. Published

    Feature recognition as a basis for the cost allocation and decision making toolset

    Lanz, M., Luostarinen, P., Garcia, F. & Andersson, P. H., 2009, Proceedings of the 20th International Conference on Production Research, ICPR'2009, August 2009, Shanghai, China. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Feed-hopper level estimation and control in cone crushers

    Itävuo, P., Hulthén, E. & Vilkko, M., 15 Aug 2017, In : Minerals Engineering. 110, p. 82-95 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    FEM-based wear simulation for fretting contacts

    Mäntylä, A., Juoksukangas, J., Hintikka, J., Frondelius, T. & Lehtovaara, A., 2020, In : Rakenteiden Mekaniikka. 53, 1, p. 20-27 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Published

    Filtering scheme for context-aware fog computing in cyber-physical systems

    Mononen, T., M. Aref, M. & Mattila, J., 2018, 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications (MESA): 2-4 July 2018, Oulu.. Oulu: IEEE, 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Unpublished

    FIMA report: The diesel engine and its rivals – The future of powering non-road mobile machinery

    Tikkanen, S., 26 May 2016, (Unpublished) FIMA, Forum for Intelligent Machines ry. 43 p.

    Research output: Book/ReportCommissioned reportProfessional

  47. Published

    Finnish manufacturing companies' views on sustainable development and sustainable manufacturing

    Koho, M., Kuusela, J. & Tapaninaho, M., 2011, Tampere Manufacturing Summit, Lean and Sustainable, 23-25 May, 2011, Tampere Hall, Tampere, Finland. Tampere: Tampere Manufacturing Summit, (Tampere Manufacturing Summit, Lean and Sustainable).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  48. Published

    Finnish manufacturing companies' views on sustainable development and sustainable production

    Koho, M., Kuusela, J., Tapaninaho, M. & Torvinen, S., 2011, Proceedings of the 4th International Swedish Production Symposium, SPS11 3-5 May, 2011, Lund, Sweden. Ståhl, J-E. (ed.). Lund: The Swedish Production Academy, p. 407-413 (International Swedish Production Symposium SPS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Flexible gripper system for small optical assemblies - final tests and findings

    Prusi, T., Heikkilä, R., Ha, T. H., Song, J. Y., Lee, C. W. & Tuokko, R., 2012, Precision assembly technologies and systems. Proceedings of the 6th IFIP WG 5.5 International precision assembly seminar, IPAS 2012, 12-14 February, 2012, Chamonix, France. Svetan, R. (ed.). Heidelberg: Springer, p. 55-64 (IFIP Advances in Information and Communication Technology; vol. 371).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Flow-limited path-following control of a double Ackermann steered hydraulic mobile manipulator

    Hulttinen, L. & Mattila, J., 2020, 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM). IEEE, p. 625-630 6 p. ( IEEE/ASME International Conference on Advanced Intelligent Mechatronics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1...6 7 8 9 10 11 12 13 ...26 Next
Download list To download, please limit the number of search results to 1,000 or less.