Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    A comparison of five optical surface topography measurement methods

    Mettänen, M. & Hirn, U., 1 Jan 2015, In : TAPPI Journal. 14, 1, p. 27-38 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  2. Published

    A comparison of relative displacement fields between numerical predictions and experimental results in fretting contact

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 1 Oct 2016, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 230, 10, p. 1273-1287 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    Adaptive and nonlinear control of discharge pressure for variable displacement axial piston pumps

    Koivumäki, J. & Mattila, J., 1 Oct 2017, In : Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME. 139, 10, 101008.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    A fractional representation approach to the robust regulation problem for SISO systems

    Laakkonen, P. & Quadrat, A., 1 May 2017, In : Systems and Control Letters. 103, p. 32-37 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. A framework for building behavioral models for design-stage failure identification using dimensional analysis

    Coatanéa, E., Ritola, T., Tumer, I. Y. & Jensen, D., 2010, Proceedings of the ASME Design Engineering Technical Conference. AMER SOC MECHANICAL ENGINEERS, Vol. 5. p. 591-601 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Analysing traffic fluency from bus data

    Syrjärinne, P., Nummenmaa, J., Thanisch, P., Kerminen, R. & Hakulinen, E., 1 Aug 2015, In : IET Intelligent Transport Systems. 9, 6, p. 566-572 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Analysis of common rail pressure signal of dual-fuel large industrial engine for identification of injection duration of pilot diesel injectors

    Krogerus, T., Hyvönen, M. & Huhtala, K., Mar 2018, In : Fuel. 216, p. 1-9

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    Analysis of thermo-active pile structures and their performance under groundwater flow conditions

    Gashti, E. H. N., Malaska, M. & Kujala, K., 11 Aug 2015, In : Energy and Buildings. 105, p. 1-8 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    An Artificial Nocturnal Flower via Humidity-Gated Photoactuation in Liquid Crystal Networks

    Wani, O. M., Verpaalen, R., Zeng, H., Priimagi, A. & Schenning, A. P. H. J., Jan 2019, In : Advanced Materials. 31, 2, 1805985.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    A near-infrared optoelectronic approach to detection of road conditions

    Colace, L., Santoni, F. & Assanto, G., May 2013, In : Optics and Lasers in Engineering. 51, 5, p. 633-636 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    An origami inspired reconfigurable spiral antenna

    Saintsing, C. D., Cook, B. S. & Tentzeris, M. M., 2014, 38th Mechanisms and Robotics Conference. The American Society of Mechanical Engineers ASME, Vol. 5B.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    A Reduced-Order Two-Degree-of-Freedom Composite Nonlinear Feedback Control for a Rotary DC Servo Motor

    Pyrhönen, V-P., Koivisto, H. & Vilkko, M., 12 Dec 2017, Proceedings of the 56th IEEE Conference on Decision and Control. Melbourne, Australia, p. 2065-2071 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Assessing population vulnerability towards summer energy poverty: Case studies of Madrid and London

    Sanchez-Guevara, C., Núñez Peiró, M., Taylor, J., Mavrogianni, A. & Neila González, J., 1 May 2019, In : Energy and Buildings. 190, p. 132-143 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. E-pub ahead of print

    Assessment of pitting corrosion in bare and passivated (wet scCO2-induced patination and chemical passivation) hot-dip galvanized steel samples with SVET, FTIR, and SEM (EDS)

    Saarimaa, V., Fuertes, N., Persson, D., Zavalis, T., Kaleva, A., Nikkanen, J-P., Levänen, E. & Heydari, G., 2020, In : Materials and Corrosion.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Asymptotics and approximation of large systems of ordinary differential equations

    Paunonen, L. & Seifert, D., 2020, In : Systems and Control Letters. 140, 9 p., 104703.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    A system for real-time detection and tracking of vehicles from a single car-mounted camera

    Caraffi, C., Vojir, T., Trefný, J., Šochman, J. & Matas, J., 2012, 2012 15th International IEEE Conference on Intelligent Transportation Systems, ITSC 2012. p. 975-982 8 p. 6338748

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. E-pub ahead of print

    A TOpti simulation for finding fuel saving by optimising propulsion control and power management

    Jaurola, M., Hedin, A., Tikkanen, S. & Huhtala, K., 2019, In : Journal of Marine Science and Technology (Japan).

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Avoiding the high friction peak in fretting contact

    Juoksukangas, J., Hintikka, J., Lehtovaara, A., Mäntylä, A., Vaara, J. & Frondelius, T., 2020, In : Rakenteiden Mekaniikka. 53, 1, p. 12-19 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Barkhausen Noise Probes and Modelling: A Review

    Santa-aho, S., Laitinen, A., Sorsa, A. & Vippola, M., 1 Dec 2019, In : Journal of Nondestructive Evaluation. 38, 4, 94.

    Research output: Contribution to journalReview ArticleScientificpeer-review

  20. Published

    Barkhausen noise response of three different welded duplex stainless steels

    Lindgren, M., Santa-aho, S. & Vippola, M., 1 Sep 2016, In : Insight. 58, 9, p. 480-486 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    Behaviour of leaded tin bronze in simulated seawater in the absence and presence of tribological contact with alumina counterbody: Corrosion, wear and tribocorrosion

    Huttunen-Saarivirta, E., Isotahdon, E., Metsäjoki, J., Salminen, T., Ronkainen, H. & Carpén, L., 2019, In : Tribology International. 129, p. 257-271 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Bioactive glass ions induce efficient osteogenic differentiation of human adipose stem cells encapsulated in gellan gum and collagen type I hydrogels

    Vuornos, K., Ojansivu, M., Koivisto, J. T., Häkkänen, H., Belay, B., Montonen, T., Huhtala, H., Kääriäinen, M., Hupa, L., Kellomäki, M., Hyttinen, J., Ihalainen, J. A. & Miettinen, S., 1 Jun 2019, In : Materials Science and Engineering C. 99, p. 905-918 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Biomimetic hemo-compatible surfaces of polyurethane by grafting copolymer brushes of poly(ethylene glycol) and poly(phosphorylcholine methacrylate)

    Yang, D., Feng, Y., Behl, M., Lendlein, A., Zhao, H., Khan, M. & Guo, J., 2012, Multifunctional Polymer-Based Materials. Vol. 1403. p. 171-176 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Block copolymer self-assembly on ethylene glycol (EG) self-assembled monolayer (SAM) for nanofabrication

    Borah, D., Rasappa, S., Kosmala, B., Holmes, J. D. & Morris, M. A., 2012, Nanoscale Materials Modification by Photon, Ion, and Electron Beams. Vol. 1450. p. 8-13 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Branched thiophene oligomer/polymer bulk heterojunction organic solar cell

    Martinez, F., Neculqueo, G., Vasquez, S. O., Lemmetyinen, H., Efimov, A. & Vivo, P., 2015, Materials Research Society Symposium Proceedings. MATERIALS RESEARCH SOCIETY, Vol. 1737. p. 19-25 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Characterization of cracks formed in large flat-on-flat fretting contact

    Juoksukangas, J., Nurmi, V., Hintikka, J., Vippola, M., Lehtovaara, A., Mäntylä, A., Vaara, J. & Frondelius, T., Jul 2019, In : International Journal of Fatigue. 124, p. 361-370 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Characterization of the microstructure and corrosion performance of Ce-alloyed Nd-Fe-B magnets

    Isotahdon, E., Huttunen-Saarivirta, E. & Kuokkala, V., Jan 2017, In : Journal of Alloys and Compounds. 692, p. 190-197

    Research output: Contribution to journalArticleScientificpeer-review

  28. Chemically tailored dielectric-to-metal transition for the design of metamaterials from nanoimprinted colloidal nanocrystals

    Fafarman, A. T., Hong, S. H., Caglayan, H., Ye, X., Diroll, B. T., Paik, T., Engheta, N., Murray, C. B. & Kagan, C. R., 13 Feb 2013, In : Nano Letters. 13, 2, p. 350-357 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    Chemical synthesis of WC-Co from water-soluble precursors: The effect of carbon and cobalt additions to WC synthesis

    Kanerva, U., Karhu, M., Lagerbom, J., Kronlöf, A., Honkanen, M., Turunen, E. & Laitinen, T., 1 Apr 2016, In : International Journal of Refractory Metals and Hard Materials. 56, p. 69-75 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    Chip-by-chip configurable interconnection using digital printing techniques

    Mashayekhi, M., Winchester, L., Laurila, M-M., Mäntysalo, M., Ogier, S., Terés, L. & Carrabina, J., 6 Mar 2017, In : Journal of Micromechanics and Microengineering. 27, 4, 045009.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Circular dichroism in the second harmonic field evidenced by asymmetric AU coated gaas nanowires

    Belardini, A., Leahu, G., Petronijevic, E., Hakkarainen, T., Koivusalo, E., Piton, M. R., Talmila, S., Guina, M. & Sibilia, C., 1 Feb 2020, In : Micromachines. 11, 2, p. 1-8 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    Co-electrospun blends of PU and PEG as potential biocompatible scaffolds for small-diameter vascular tissue engineering

    Wang, H., Feng, Y., Fang, Z., Yuan, W. & Khan, M., 1 Dec 2012, In : Materials Science and Engineering C: Materials for Biological Applications. 32, 8, p. 2306-2315 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    Comparative environmental impacts of additive and subtractive manufacturing technologies

    Paris, H., Mokhtarian, H., Coatanéa, E., Museau, M. & Ituarte, I. F., 2016, In : CIRP Annals: Manufacturing Technology. 65, 1, p. 29-32

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    Complete Odometry Estimation of a Vehicle Using Single Automotive Radar and a Gyroscope

    Ghabcheloo, R. & Siddiqui, S., 20 Aug 2018, MED 2018 - 26th Mediterranean Conference on Control and Automation. IEEE, p. 855-860 6 p. 8442474

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Computational design of a novel medium-carbon, low-alloy steel microalloyed with niobium

    Javaheri, V., Nyyssönen, T., Grande, B. & Porter, D., Jun 2018, In : Journal of Materials Engineering and Performance. 27, 6, p. 2978-2992 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    Concepts, methods and tools for individualized production

    Lanz, M. & Tuokko, R., 1 Apr 2017, In : PRODUCTION ENGINEERING. 11, 2, p. 205-212 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    Conjugated Heat Transfer Simulation of a Fin-and-Tube Heat Exchanger

    Välikangas, T. & Karvinen, R., 2018, In : Heat Transfer Engineering. 39, 13-14, p. 1192-1200 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    Consideration of energy consumption, energy costs, and space occupancy in Finnish daycare centres and school buildings

    Sekki, T., Andelin, M., Airaksinen, M. & Saari, A., 1 Oct 2016, In : Energy and Buildings. 129, p. 199-206 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    Controlling liquid spreading using microfabricated undercut edges

    Liimatainen, V., Sariola, V. & Zhou, Q., 24 Apr 2013, In : Advanced Materials. 25, 16, p. 2275-2278 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    Corrosion mechanisms of sintered Nd-Fe-B magnets in the presence of water as vapour, pressurised vapour and liquid

    Isotahdon, E., Huttunen-Saarivirta, E., Heinonen, S., Kuokkala, V. T. & Paju, M., 25 Mar 2015, In : Journal of Alloys and Compounds. 626, p. 349-359 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Cost optimal and nearly zero (nZEB) energy performance calculations for residential buildings with REHVA definition for nZEB national implementation

    Kurnitski, J., Saari, A., Kalamees, T., Vuolle, M., Niemelä, J. & Tark, T., Nov 2011, In : Energy and Buildings. 43, 11, p. 3279-3288 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Defined-size DNA triple crossover construct for molecular electronics: Modification, positioning and conductance properties

    Linko, V., Leppiniemi, J., Paasonen, S. T., Hytönen, V. P. & Jussi Toppari, J., 8 Jul 2011, In : Nanotechnology. 22, 27, 275610.

    Research output: Contribution to journalArticleScientificpeer-review

  43. Published

    Deformability analysis and improvement in stretchable electronics systems through finite element analysis

    Di Vito, D., Mosallaei, M., Vahed, B. K., Kanerva, M. & Mäntysalo, M., 2020, Proceedings of XXIV AIMETA Conference 2019. Carcaterra, A., Graziani, G. & Paolone, A. (eds.). Springer, p. 755-763 9 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Democratizing composites manufacturing -inexpensive tooling empowers new players

    Antin, K. N. & Pärnänen, T., 1 Jul 2017, In : SAMPE Journal. 53, 4, p. 6-10 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. E-pub ahead of print

    Deposition of dry particles on a fin-and-tube heat exchanger by a coupled soft-sphere DEM and CFD

    Välikangas, T., Hærvig, J., Kuuluvainen, H., Dal Maso, M., Peltonen, P. & Vuorinen, V., 2019, In : International Journal of Heat and Mass Transfer. 19 p., 119046.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Detection beyond Debye's length with an electrolyte-gated organic field-effect transistor

    Palazzo, G., De Tullio, D., Magliulo, M., Mallardi, A., Intranuovo, F., Mulla, M. Y., Favia, P., Vikholm-Lundin, I. & Torsi, L., 2015, In : Advanced Materials. 27, 5, p. 911-916 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. E-pub ahead of print

    Detection of gaseous species during KCl-induced high-temperature corrosion by the means of CPFAAS and CI-APi-TOF

    Lehmusto, J., Olin, M., Viljanen, J., Kalliokoski, J., Mylläri, F., Toivonen, J., Dal Maso, M. & Hupa, L., 30 Aug 2019, In : Materials and Corrosion. 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    Development and numerical implementation of an anisotropic continuum damage model for concrete

    Hartikainen, J., Kolari, K. & Kouhia, R., 2016, Advances in Fracture and Damage Mechanics XV. Trans Tech Publications Ltd, p. 115-118 4 p. (Key Engineering Materials; vol. 713).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Development of expanded graphite filled natural rubber vulcanizates in presence and absence of carbon black: Mechanical, thermal and morphological properties

    Malas, A., Das, C. K., Das, A. & Heinrich, G., 2012, In : Materials and Design. 39, p. 410-417 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    DIC measurements of the human heart during cardiopulmonary bypass surgery

    Hokka, M., Mirow, N., Nagel, H., Vogt, S. & Kuokkala, V-T., 2016, Conference Proceedings of the Society for Experimental Mechanics Series. Springer New York LLC, Vol. 6. p. 51-59 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    Differential basal-to-apical accessibility of lamin A/C epitopes in the nuclear lamina regulated by changes in cytoskeletal tension

    Ihalainen, T. O., Aires, L., Herzog, F. A., Schwartlander, R., Moeller, J. & Vogel, V., 1 Dec 2015, In : Nature Materials. 14, 12, p. 1252-1261 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  52. Published

    Digital hydraulic multi-pressure actuator – the concept, simulation study and first experimental results

    Huova, M., Aalto, A., Linjama, M., Huhtala, K., Lantela, T. & Pietola, M., 2017, In : International Journal of Fluid Power. 18, 3, p. 141-152 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  53. Published

    Digital image correlation study of the deformation and functioning of the human heart during open-heart surgery

    Soltani, A., Curtze, S., Lahti, J., Järvelä, K., Laurikka, J., Hokka, M. & Kuokkala, V. T., 2018, Mechanics of Biological Systems, Materials and other topics in Experimental and Applied Mechanics - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Springer New York LLC, Vol. 4. p. 19-27 9 p. (Conference Proceedings of the Society for Experimental Mechanics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  54. Published

    Dimension reduction and decomposition using causal graph and qualitative analysis for aircraft concept design optimization

    Wu, D., Coatanea, E. & Wang, G. G., 2017, 43rd Design Automation Conference. The American Society of Mechanical Engineers ASME

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  55. Published

    Direct model predictive power control of a series-connected modular rectifier

    Rossi, M., Liegmann, E., Karamanakos, P., Castelli-Dezza, F. & Kennel, R., 1 May 2019, PRECEDE 2019: 2019 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics. IEEE, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  56. E-pub ahead of print

    Dissolution, bioactivity and osteogenic properties of composites based on polymer and silicate or borosilicate bioactive glass

    Houaoui, A., Lyyra, I., Agniel, R., Pauthe, E., Massera, J. & Boissière, M., 2019, In : Materials Science and Engineering C. 107, 110340.

    Research output: Contribution to journalArticleScientificpeer-review

  57. Published

    Divertor remote handling for DEMO: Concept design and preliminary FMECA studies

    Carfora, D., Di Gironimo, G., Järvenpää, J., Huhtala, K., Määttä, T. & Siuko, M., 9 Jul 2015, In : Fusion Engineering and Design. 98-99, p. 1437-1441 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  58. Published

    Do properties of bioactive glasses exhibit mixed alkali behavior?

    Wang, X., Fagerlund, S., Massera, J., Södergård, B. & Hupa, L., 2017, In : Journal of Materials Science. 52, 15, p. 8986–8997 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  59. Published

    Dynamic speckle analysis with smoothed intensity-based activity maps

    Stoykova, E., Berberova, N., Kim, Y., Nazarova, D., Ivanov, B., Gotchev, A., Hong, J. & Kang, H., 1 Jun 2017, In : Optics and Lasers in Engineering. 93, p. 55-65 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  60. Published

    Effect of air gap on the adhesion of PET layer on cardboard substrate in extrusion coating

    Suokas, E., 1 Jan 2017, 16th TAPPI European PLACE Conference 2017. TAPPI Press, p. 529-544 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  61. Published

    Effect of energy measures on the values of energy efficiency indicators in Finnish daycare and school buildings

    Sekki, T., Airaksinen, M. & Saari, A., 15 Mar 2017, In : Energy and Buildings. 139, p. 124-132 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  62. Published

    Effect of finish rolling and quench stop temperatures on impact-abrasive wear resistance of 0.35 % carbon direct-quenched steel

    Haiko, O., Miettunen, I., Porter, D., Ojala, N., Ratia, V., Heino, V. & Kemppainen, A., 2017, In : Tribologia. 35, 1-2, p. 5-21 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  63. Published

    Effect of microstructure on the abrasive wear resistance of steels with hardness 450 HV

    Haiko, O., Heino, V., Porter, D. A., Uusitalo, J. & Kömi, J., 2019, In : Tribologia. 36, 1, p. 54-57 4 p.

    Research output: Contribution to journalArticleScientific

  64. Published

    Effect of Multiple Impacts on the Deformation of Wear-Resistant Steels

    Ratia, V., Rojacz, H., Terva, J., Valtonen, K., Badisch, E. & Kuokkala, V. T., 21 Jan 2015, In : Tribology Letters. 57, 2, 15.

    Research output: Contribution to journalArticleScientificpeer-review

  65. Published

    Effect of polyolefin molecular structure on product properties in extrusion coating

    Suokas, E., 2019, 17th Biennial TAPPI European PLACE Conference 2019. TAPPI Press, p. 89-98 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  66. Published

    Effect of pre-treatments on barrier properties of layers applied by atomic layer deposition onto polymer-coated substrates

    Vähä-Nissi, M., Hirvikorpi, T., Sievänen, J., Salo, E., Harlin, A., Johansson, P. & Kuusipalo, J., 2011, 13th European PLACE Conference 2011. Vol. 1. p. 447 1 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  67. Published

    Effect of rotor pole-shoe construction on losses of inverter-fed synchronous motors

    Rasilo, P., Belahcen, A. & Arkkio, A., 2012, Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012. p. 1282-1286 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  68. Published

    Effects of added glazing on Balcony indoor temperatures: Field measurements

    Hilliaho, K., Köliö, A., Pakkala, T., Lahdensivu, J. & Vinha, J., 2016, In : Energy and Buildings. 128, p. 458-472 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  69. Published

    Effects of adiabatic heating estimated from tensile tests with continuous heating

    Vazquez Fernandez, N., Isakov, M., Hokka, M. & Kuokkala, V. T., 2018, Dynamic Behavior of Materials - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Springer New York LLC, Vol. 1. p. 1-7 7 p. (Conference Proceedings of the Society for Experimental Mechanics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  70. Published

    Effects of strain rate and confining pressure on the compressive behavior of Kuru granite

    Hokka, M., Black, J., Tkalich, D., Fourmeau, M., Kane, A., Hoang, N. H., Li, C. C., Chen, W. W. & Kuokkala, V-T., 1 May 2016, In : International Journal of Impact Engineering. 91, p. 183-193 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  71. Published

    Electrolyte-gated organic field-effect transistor sensors based on supported biotinylated phospholipid bilayer

    Magliulo, M., Mallardi, A., Mulla, M. Y., Cotrone, S., Pistillo, B. R., Favia, P., Vikholm-Lundin, I., Palazzo, G. & Torsi, L., 11 Apr 2013, In : Advanced Materials. 25, 14, p. 2090-2094 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  72. Published

    Elevated and cryogenic temperature micropillar compression of magnesium–niobium multilayer films

    Thomas, K., Mohanty, G., Wehrs, J., Taylor, A. A., Pathak, S., Casari, D., Schwiedrzik, J., Mara, N., Spolenak, R. & Michler, J., 15 Aug 2019, In : Journal of Materials Science. 54, 15, p. 10884-10901 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  73. Published

    Employing Knowledge on Causal Relationship to Assist Multidisciplinary Design Optimization

    Wu, D., Coatanea, E. & Wang, G. G., Apr 2019, In : Journal of Mechanical Design, Transactions of the ASME. 141, 4, 041402.

    Research output: Contribution to journalArticleScientificpeer-review

  74. Published

    Enablers and barriers of smart data-based asset management services in industrial business networks

    Ahonen, T., Hanski, J., Hyvärinen, M., Kortelainen, H., Uusitalo, T., Vainio, H., Kunttu, S. & Koskinen, K., 2019, Lecture Notes in Mechanical Engineering. Pleiades Publishing, p. 51-60 10 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  75. Published

    End-plate connections in Bi-axial bending - Measurements

    Mäkinen, J., Fränti, K., Korhonen, M., Fillion, J. & Heinisuo, M., 2016, 13th International Aluminium Conference, Sustainability, Durability and Structural Advantages, : INALCO 2016; Naples; Italy; 21 September 2016 through 23 September 2016. Mazzolani, F. M., Squillace, A., Faggiano, B. & Bellucci, F. (eds.). Trans Tech Publications Ltd, Vol. 710. p. 275-280 6 p. (Key Engineering Materials; vol. 710).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  76. Published

    Enhanced multiaxial fatigue criterion that considers stress gradient effects

    Ottosen, N. S., Ristinmaa, M. & Kouhia, R., 1 Nov 2018, In : International Journal of Fatigue. 116, p. 128-139 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  77. Published

    Enhanced resonant nonlinear absorption and optical limiting in Er3+ ions doped multicomponent tellurite glasses

    Sajna, M. S., Perumbilavil, S., Prakashan, V. P., Sanu, M. S., Joseph, C., Biju, P. R. & Unnikrishnan, N. V., 1 Aug 2018, In : Materials Research Bulletin. 104, p. 227-235 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  78. Published

    Erbium-doped borosilicate glasses containing various amounts of P2O5 and Al2O3: Influence of the silica content on the structure and thermal, physical, optical and luminescence properties

    Bourhis, K., Massera, J., Petit, L., Koponen, J., Fargues, A., Cardinal, T., Hupa, L., Hupa, M., Dussauze, M., Rodriguez, V. & Ferraris, M., 1 Oct 2015, In : Materials Research Bulletin. 70, p. 47-54 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  79. Published

    Erosive-abrasive wear behavior of carbide-free bainitic and boron steels compared in simulated field conditions

    Vuorinen, E., Heino, V., Ojala, N., Haiko, O. & Hedayati, A., 2018, In : Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 232, 1, p. 3-13 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  80. Evaluating retrofit options in a historical city center: Relevance of bio-based insulation and the need to consider complex urban form in decision-making

    Claude, S., Ginestet, S., Bonhomme, M., Escadeillas, G., Taylor, J., Marincioni, V., Korolija, I. & Altamirano, H., 1 Jan 2019, In : Energy and Buildings. 182, p. 196-204 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  81. Published

    Evaluating the electrode measurement sensitivity of subdermal electroencephalography electrodes

    Mendes, M. R., Subramaniyam, N. P. & Wendel-Mitoraj, K., 1 Jul 2015, International IEEE/EMBS Conference on Neural Engineering, NER. IEEE COMPUTER SOCIETY PRESS, Vol. 2015-July. p. 1092-1095 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  82. Evaluation of parts of a boat cabin based on exergy - Focusing on environmental and economic assessments

    Medyna, G., Coatanea, E. & Millet, D., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. PARTS A AND B ed. AMER SOC MECHANICAL ENGINEERS, Vol. 4. p. 1083-1092 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  83. Published

    Experimental and numerical investigation of fretting fatigue behavior in bolted joints

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 1 Nov 2016, In : Tribology International. 103, p. 440-448 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  84. Published

    Experimental and numerical study of wall layer development in a tribocharged fluidized bed

    Sippola, P., Kolehmainen, J., Ozel, A., Liu, X., Saarenrinne, P. & Sundaresan, S., 25 Aug 2018, In : Journal of Fluid Mechanics. 849, p. 860-884 25 p.

    Research output: Contribution to journalArticleScientificpeer-review

  85. Published

    Experimental study on the behavior of wear resistant steels under high velocity single particle impacts

    Lindroos, M., Apostol, M., Kuokkala, V. T., Laukkanen, A., Valtonen, K., Holmberg, K. & Oja, O., 2015, In : International Journal of Impact Engineering. 78, p. 114-127 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  86. Published

    Fabrication of a sub-10 nm silicon nanowire based ethanol sensor using block copolymer lithography

    Rasappa, S., Borah, D., Faulkner, C. C., Lutz, T., Shaw, M. T., Holmes, J. D. & Morris, M. A., 15 Feb 2013, In : Nanotechnology. 24, 6, 065503.

    Research output: Contribution to journalArticleScientificpeer-review

  87. Published

    Fabrication of soft devices with buried fluid channels by using sacrificial 3D printed molds

    Koivikko, A. & Sariola, V., 24 May 2019, 2019 2nd IEEE International Conference on Soft Robotics (RoboSoft). IEEE, p. 509-513 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  88. Published

    Feed-hopper level estimation and control in cone crushers

    Itävuo, P., Hulthén, E. & Vilkko, M., 15 Aug 2017, In : Minerals Engineering. 110, p. 82-95 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  89. Published

    FEM-based wear simulation for fretting contacts

    Mäntylä, A., Juoksukangas, J., Hintikka, J., Frondelius, T. & Lehtovaara, A., 1 Jan 2020, In : Rakenteiden Mekaniikka. 53, 1, p. 20-27 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  90. Published

    Fe2O3-TiO2 Nano-heterostructure Photoanodes for Highly Efficient Solar Water Oxidation

    Barreca, D., Carraro, G., Gasparotto, A., Maccato, C., Warwick, M. E. A., Kaunisto, K., Sada, C., Turner, S., Gönüllü, Y., Ruoko, T-P., Borgese, L., Bontempi, E., Van Tendeloo, G., Lemmetyinen, H. & Mathur, S., 2015, In : Advanced Materials Interfaces. 2, 17

    Research output: Contribution to journalArticleScientificpeer-review

  91. Published

    Fin-and-tube heat exchanger enhancement with a combined herringbone and vortex generator design

    Välikangas, T., Singh, S., Sørensen, K. & Condra, T., 2018, In : International Journal of Heat and Mass Transfer. 118, p. 602-616 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  92. Published

    Fluorine losses in Er3+oxyfluoride phosphate glasses and glass-ceramics

    Szczodra, A., Mardoukhi, A., Hokka, M., Boetti, N. G. & Petit, L., 15 Aug 2019, In : Journal of Alloys and Compounds. 797, p. 797-803 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  93. Published

    Flux-Weakening Control for IPMSM Employing Model Order Reduction

    Far, M. F., Mustafa, B., Martin, F., Rasilo, P. & Belahcen, A., 24 Oct 2018, 2018 23rd International Conference on Electrical Machines, ICEM 2018. IEEE, p. 1510-1516 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  94. Published

    FORMI: A Fast Holonomic Path Planning and Obstacle Representation Method Based on Interval Analysis

    Mäenpää, P., Aref, M. M. & Mattila, J., 1 Nov 2019, Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems and Robotics, Automation and Mechatronics, CIS and RAM 2019. IEEE, p. 398-403 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  95. Published

    Framework and feasibility study for pairwise comparison tool

    Ellman, A., Wendrich, R. & Tiainen, T., 21 Aug 2016, Proceedings of the ASME 2016 Computers and Information in Engineering Conference IDETC/CIE 2016. Charlotte, North Carolina: ASME, 7 p. DETC2016-59886

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  96. Published

    Fretting-induced friction and wear in large flat-on-flat contact with quenched and tempered steel

    Hintikka, J., Lehtovaara, A. & Mäntylä, A., 2 Jul 2015, In : Tribology International. 92, p. 191-202 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  97. Published

    From Responsive Molecules to Interactive Materials

    Priimägi, A. (ed.) & Hecht, S. (ed.), 2020, In : Advanced Materials. 32, 20, 3 p., 2000215.

    Research output: Contribution to journalEditorialScientific

  98. Published

    Generic platform for manufacturing execution system functions in knowledge-driven manufacturing systems

    Mohammed, W. M., Ramis Ferrer, B., Iarovyi, S., Negri, E., Fumagalli, L., Lobov, A. & Martinez Lastra, J. L., 4 Mar 2018, In : International Journal of Computer Integrated Manufacturing. p. 1-13 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  99. Published

    Global energy consumption due to friction and wear in the mining industry

    Holmberg, K., Kivikytö-Reponen, P., Härkisaari, P., Valtonen, K. & Erdemir, A., 1 Nov 2017, In : Tribology International. 115, p. 116-139 24 p.

    Research output: Contribution to journalArticleScientificpeer-review

  100. Published

    Graph based representation and analyses for conceptual stages

    Coatanéa, E., Nonsiri, S., Christophe, F. & Mokammel, F., 2014, 34th Computers and Information in Engineering Conference. The American Society of Mechanical Engineers ASME, Vol. 1A.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  101. Published

    Graphoepitaxial Directed Self-Assembly of Polystyrene-Block-Polydimethylsiloxane Block Copolymer on Substrates Functionalized with Hexamethyldisilazane to Fabricate Nanoscale Silicon Patterns

    Borah, D., Rasappa, S., Senthamaraikannan, R., Holmes, J. D. & Morris, M. A., 1 Jun 2014, In : Advanced Materials Interfaces. 1, 3, 1300102.

    Research output: Contribution to journalArticleScientificpeer-review

  102. Published

    Heat Transfer of Impinging Jet: Effect of Compressibility and Turbulent Kinetic Energy Production

    Mikkonen, A. & Karvinen, R., 2017, IX International Conference on Computational Heat and Mass Transfer (ICCHMT 2016) .

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  103. Published

    Hexaferrite/polyethylene Composite coatings prepared with flame spraying

    Lisjak, D., Lintunen, P., Hujanen, A., Varis, T., Bolelli, G., Lusvarghi, L., Jagodič, M. & Drofenik, M., 15 Feb 2011, In : Materials Letters. 65, 3, p. 534-536 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  104. Published

    Highly conducting polychloroprene composites based on multi-walled carbon nanotubes and 1-butyl 3-methyl imidazolium bis(trifluoromethylsulphonyl)imide

    Subramaniam, K., Das, A. & Heinrich, G., Jul 2012, In : KGK: KAUTSCHUK GUMMI KUNSTSTOFFE. 65, 7-8, p. 44-46 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  105. Published

    High-order lattice-Boltzmann

    Philippi, P. C., Siebert, D. N., Hegele, L. A. & Mattila, K. K., 1 Jun 2016, In : Journal of the Brazilian Society of Mechanical Sciences and Engineering. 38, 5, p. 1401-1419 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  106. Published

    High performance natural rubber composites with a hierarchical reinforcement structure of carbon nanotube modified natural fibers

    Tzounis, L., Debnath, S., Rooj, S., Fischer, D., Mäder, E., Das, A., Stamm, M. & Heinrich, G., 2014, In : Materials and Design. 58, p. 1-11 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  107. Published

    High Temperature Tension HSB Device Based on Direct Electrical Heating

    Hokka, M., Östman, K., Rämö, J. & Kuokkala, V. T., 2015, Dynamic Behavior of Materials, Volume 1: Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics. Song, B., Casem, D. & Kimberley, J. (eds.). Springer, Vol. 65. p. 227-233 7 p. (Conference Proceedings of the Society for Experimental Mechanics Series).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  108. Published

    Hot-box measurements to investigate the internal convection of highly insulated loose-fill insulation roof structures

    Kivioja, H. & Vinha, J., 1 Jun 2020, In : Energy and Buildings. 216, 109934.

    Research output: Contribution to journalArticleScientificpeer-review

  109. Published

    Hydrazone crosslinked hyaluronan-based hydrogels for therapeutic delivery of adipose stem cells to treat corneal defects

    Koivusalo, L., Karvinen, J., Sorsa, E., Jönkkäri, I., Väliaho, J., Kallio, P., Ilmarinen, T., Miettinen, S., Skottman, H. & Kellomäki, M., Apr 2018, In : Materials Science and Engineering C. 85, p. 68-78 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  110. Published

    Hyperspectral phase imaging based on denoising in complex-valued eigensubspace

    Shevkunov, I., Katkovnik, V., Claus, D., Pedrini, G., Petrov, N. V. & Egiazarian, K., 1 Apr 2020, In : Optics and Lasers in Engineering. 127, 10 p., 105973.

    Research output: Contribution to journalArticleScientificpeer-review

  111. Published

    Icephobicity of Slippery Liquid Infused Porous Surfaces under Multiple Freeze–Thaw and Ice Accretion–Detachment Cycles

    Niemelä-Anttonen, H., Koivuluoto, H., Tuominen, M., Teisala, H., Juuti, P., Haapanen, J., Harra, J., Stenroos, C., Lahti, J., Kuusipalo, J., Mäkelä, J. M. & Vuoristo, P., Oct 2018, In : Advanced Materials Interfaces. 5, 20

    Research output: Contribution to journalArticleScientificpeer-review

  112. Published

    Impact of building usage and occupancy on energy consumption in Finnish daycare and school buildings

    Sekki, T., Airaksinen, M. & Saari, A., 18 Aug 2015, In : Energy and Buildings. 105, p. 247-257 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  113. Published

    Impact wear and mechanical behavior of steels at subzero temperatures

    Valtonen, K., Ratia, V., Ramakrishnan, K. R., Apostol, M., Terva, J. & Kuokkala, V-T., 2019, In : Tribology International. 129, p. 476-493 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  114. Published

    Implementation of a direct procedure for critical point computations using preconditioned iterative solvers

    Kouhia, R., Tůma, M., Mäkinen, J., Fedoroff, A. & Marjamäki, H., Oct 2012, In : Computers & Structures. 108-109, p. 110-117 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  115. Published

    Improved dimensional stability with bioactive glass fibre skeleton in poly(lactide-co-glycolide) porous scaffolds for tissue engineering

    Haaparanta, A-M., Uppstu, P., Hannula, M., Ellä, V., Rosling, A. & Kellomäki, M., 20 Jul 2015, In : Materials Science and Engineering C: Materials for Biological Applications. 56, p. 457-466 10 p., 5584.

    Research output: Contribution to journalArticleScientificpeer-review

  116. Published

    Improving the effect of a nanoscale barrier coating on BOPP film properties by surface pretreatments

    Lahtinen, K., Lahti, J., Johansson, P., Seppänen, T. & Cameron, D. C., 2013, 14th European PLACE Conference 2013. TAPPI Press, Vol. 1. p. 469-493 25 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  117. Published

    Improving the effect of nanoscale barrier coating on BOPP film properties: Influence of substrate contamination, web handling and pretreatments

    Lahti, J., Johansson, P., Lahtinen, K., Cameron, D. C. & Seppänen, T., 2014, TAPPI PLACE Conference 2014. TAPPI Press, Vol. 2. p. 1039-1061 23 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  118. Published

    Improving the thermal performance of concrete-sandwich envelopes in relation to the moisture behaviour of building structures in boreal conditions

    Fedorik, F., Malaska, M., Hannila, R. & Haapala, A., 15 Nov 2015, In : Energy and Buildings. 107, p. 226-233 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  119. Published

    Improving the toughness of thermally sprayed Cr 3C 2-NiCr hardmetal coatings by laser post-treatment

    Janka, L., Norpoth, J., Eicher, S., Rodríguez Ripoll, M. & Vuoristo, P., 15 May 2016, In : Materials and Design. 98, p. 135-142 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  120. Published

    Inertial Sensor-Based State Estimation of Flexible Links Subject to Bending and Torsion

    Mäkinen, P., Mononen, T. & Mattila, J., 27 Aug 2018, 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018. IEEE, 8 p. 8449188

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  121. Published

    Influence of specimen type and reinforcement on measured tension-tension fatigue life of unidirectional GFRP laminates

    Korkiakoski, S., Brøndsted, P., Sarlin, E. & Saarela, O., 1 Apr 2016, In : International Journal of Fatigue. 85, p. 114-129 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  122. Published

    Investigating the kinetics and biofuel properties of Alstonia congensis and Ceiba pentandra via torrefaction

    Oluoti, K., Doddapaneni, T. R. K. C. & Richards, T., 1 May 2018, In : Energy. 150, p. 134-141 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  123. E-pub ahead of print

    Investigation on positioning control strategy and switching optimization of an equal coded digital valve system

    Gao, Q., Linjama, M., Paloniitty, M. & Zhu, Y., 2019, In : Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering.

    Research output: Contribution to journalArticleScientificpeer-review

  124. Published

    Käyräviivaiset koordinaatistot kontinuumimekaniikassa

    Holopainen, S., 2020, In : Rakenteiden Mekaniikka. 53, 2, p. 53-66 14 p.

    Research output: Contribution to journalArticleScientificpeer-review