Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Article › Scientific › Not peer-reviewed
  2. Published

    Discussion: Is the future of fluid power digital? Response

    Linjama, M., Scheidl, R. & Schmidt, S., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 226, I6, p. 726-727

    Research output: Contribution to journalArticleScientific

  3. Published

    Erratum: 3D numerical modelling of bit-rock fracture mechanisms in percussive drilling with a multiple-button bit (vol 37, pg 309, 2013)

    Saksala, T., 2013, In : International Journal for Numerical and Analytical Methods in Geomechanics. 37, 3, p. 325-330 6 p.

    Research output: Contribution to journalArticleScientific

  4. Published

    GVT-Getriebe mit hydrostatischer Verstelleinheit

    Erkkilä, M. & Viitasalo, V., 2010, In : Mobile Maschinen. 1/2010, p. 32-33

    Research output: Contribution to journalArticleScientific

  5. Published

    Hydrauliikan komponenttipuhtausstandardien hyödyntäminen suomalaisessa konepajateollisuudessa

    Rinkinen, J., 2010, In : Fluid Finland. 1/2010, p. 18-23

    Research output: Contribution to journalArticleScientific

  6. Published

    Hydraulikomponenttien käyttöikä

    Rinkinen, J. & Immonen, A., 2010, In : Fluid Finland. 1/2010, p. 8-11

    Research output: Contribution to journalArticleScientific

  7. Published

    Kehitystä putkistopassin koulutusmateriaaliin

    Rinkinen, J. & Virta, S., 2010, In : Fluid Finland. 1/2010, p. 28-30

    Research output: Contribution to journalArticleScientific

  8. Published

    Koulutuksesta ja tutkimuksesta

    Huhtala, K., 2010, In : Fluid Finland. 9, 3-4, p. 6-6

    Research output: Contribution to journalArticleScientific

  9. Published

    M1-teknologialla voidaan rakentaa virtuaalisia oppimisympäristöjä ja konelaboratorioita

    Koskinen, K. T., Leino, T., Palonen, T. & Ranta, P., 2010, In : Fluid Finland. 2/2010, p. 18-20

    Research output: Contribution to journalArticleScientific

  10. Published

    Matkaraportti: Digitaalihydrauliikan seminaari marraskuisessa Linzissä

    Linjama, M., 2010, In : Fluid Finland. 1/2010, p. 12-14

    Research output: Contribution to journalArticleScientific

  11. E-pub ahead of print

    Reconfigurable manipulator simulation for robotics and multimodal machine learning application: Aaria: Aaria

    Hautakoski, A., Aref, M. M. & Mattila, J., 1 Mar 2018, In : arXiv.org. 1803.00532.

    Research output: Contribution to journalArticleScientific

  12. Published

    Reitinvalintaa rastilta seuraavalle

    Huhtala, K., 2010, In : Fluid Finland. 3-4, p. 7-7

    Research output: Contribution to journalArticleScientific

  13. Published

    Response to discussion with DA Hills et al., concerning the article "Development of a complete contact fretting test device" by J. Juoksukangas et al.

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 2014, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 228, 1, p. 127-128 2 p.

    Research output: Contribution to journalArticleScientific

  14. Published

    The energy balance of the electro-hydraulic linear actuation system

    Herranen, M., Huhtala, K. & Vilenius, M., 2010, In : Journal of Energy and Power Engineering. 4, 8, p. 57-63

    Research output: Contribution to journalArticleScientific

  15. Article › Scientific › Peer-reviewed
  16. Published

    3D numerical modelling of bit-rock fracture mechanisms in percussive drilling with a multiple-button bit

    Saksala, T., 2013, In : International Journal for Numerical and Analytical Methods in Geomechanics. 37, 3, p. 309-324

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    A comparison of rheology and FTIR in the study of polypropylene and polystyrene photodegradation

    Mylläri, V., Ruoko, T-P. & Syrjälä, S., 1 Jul 2015, In : Journal of Applied Polymer Science. 132, 28, 6 p., 42246.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    A concept and local implementation for industry-academy collaboration and life-long learning

    Lanz, M., Lobov, A., Katajisto, K. & Mäkelä, P., 23 Apr 2018, In : Procedia Manufacturing. 23, p. 189-194 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    A conceptual design and modeling framework for integrated additive manufacturing

    Mokhtarian, H., Coatanea, E., Paris, H., Mansor Mbow, M., Pourroy, F., René Marin, P., Vihinen, J. & Ellman, A., 28 Apr 2018, In : Journal of Mechanical Design. 140, 8, 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    A conceptual modeling and simulation framework for system Design

    Coatanea, E., Roca, R., Mokhtarian, H., Mokammel, F. & Ikkala, K., 1 Jul 2016, In : Computing in Science and Engineering. 18, 4, p. 42-52

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    A Continuum damage model based on Ottosen's four parameter failure criterion for concrete

    Tahaei Yaghoubi, S., Kouhia, R., Hartikainen, J. & Kolari, K., 2014, In : Rakenteiden mekaniikka. 47, 2, p. 50-66 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Adaptive and nonlinear control of discharge pressure for variable displacement axial piston pumps

    Koivumäki, J. & Mattila, J., 1 Oct 2017, In : Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME. 139, 10, 101008.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Additive Manufacturing in Production: A Study Case Applying Technical Requirements: 15th Nordic Laser Materials Processing Conference, Nolamp 15

    Ituarte, I. F., Coatanea, E., Salmi, M., Tuomi, J. & Partanen, J., 2015, In : Physics Procedia. 78, p. 357-366 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Adiabatic Heating of Austenitic Stainless Steels at Different Strain Rates

    Vazquez-Fernandez, N. I., Soares, G. C., Smith, J. L., Seidt, J. D., Isakov, M., Gilat, A., Kuokkala, V. T. & Hokka, M., 20 Jun 2019, In : Journal of Dynamic Behavior of Materials. 5, 3, p. 221-229 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Advances in the TUT microfactory concept development

    Heikkilä, R., Järvenpää, E. & Tuokko, R., 2010, In : International Journal of Automation Technology. 4, 2, p. 117-126

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Advantage of redundancy in the controllability of remote handling manipulator

    Muhammad, A., Mattila, J., Vilenius, M., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 1882-1885

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    A Holistic View on Design and Development of Manufacturing Systems

    Nylund, H. & Andersson, P. H., 2012, In : Procedia CIRP. 3, p. 388-393

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    A hydraulic cylinder model for multibody simulations

    Ylinen, A., Marjamäki, H. & Mäkinen, J., 2014, In : Computers & Structures. 138, p. 62-72 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    A measurement-integrated solution for particle image velocimetry and volume fraction measurements in a fluidized bed

    Kolehmainen, J., Elfvengren, J. & Saarenrinne, P., 2013, In : International Journal of Multiphase Flow. 56, p. 72-80 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    An agent-based system for orchestration support of web service-enabled devices in discrete manufacturing systems

    Villasenor Herrera, V., Vidales Ramos, A. & Martinez Lastra, J., 2012, In : Journal of Intelligent Manufacturing. 23, 6, p. 2681-2702

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Analysis of common rail pressure signal of dual-fuel large industrial engine for identification of injection duration of pilot diesel injectors

    Krogerus, T., Hyvönen, M. & Huhtala, K., Mar 2018, In : Fuel. 216, p. 1-9

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    Analysis of the new architecture proposal for the CMM control system

    Heikkilä, L., Saarinen, H., Aha, L., Viinikainen, M., Mattila, J., Hahto, A., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2071-2074

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    Analysis of the stress raising action of flaws in laser clad deposits

    Alam, M. M., Kaplan, A. F. H., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkala, J., Peltola, T. & Barsoum, Z., 2013, In : Materials and Design. 46, April, p. 328-337 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    Analytical solution for a class of flat plate conjugate convective heat transfer problems

    Lehtinen, A. & Karvinen, R., 2011, In : Frontiers in Heat and Mass Transfer. 2, p. 1-6 6 p., 043004.

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    An approach to investigating subsurface fatigue in a rolling/sliding contact

    Savolainen, M. & Lehtovaara, A., 2018, In : International Journal of Fatigue. 117, p. 180-188

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    A New Hybrid Approach for Augmented Reality Maintenance in Scientific Facilities

    Martinez, H., Laukkanen, S. & Mattila, J., 2013, In : international Journal of Advanced Robotic Systems. 10, p. 1-10 10 p., 321.

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    A new method to optimize natural convection heat sinks

    Lampio, K. & Karvinen, R., Aug 2018, In : Heat and Mass Transfer/Waerme- und Stoffuebertragung. 54, 8, p. 2571-2580

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    An Exceptional Generalization of the Poisson Distribution

    Hagmark, P-E., 2012, In : Open Journal of Statistics. 2, p. 313-318

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    An executable capability concept in formal resource descriptions

    Siltala, N., Järvenpää, E. & Lanz, M., Sep 2018, In : IFAC-PapersOnLine. 51, 11, p. 102-107 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    An experimental investigation of scuffing initiation due to axial displacement in a rolling/sliding contact

    Savolainen, M. & Lehtovaara, A., Mar 2018, In : Tribology International. 119, p. 688-697

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    An implementation of a semantic, web-based virtual machine laboratory prototyping environment

    Salonen, J., Nykänen, O., Ranta, P., Nurmi, J., Helminen, M., Rokala, M., Palonen, T., Alarotu, V., Koskinen, K. & Pohjolainen, S., 2011, In : Lecture Notes in Computer Science. 7032, p. 221-236

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    An integrated approach to mixed-model assembly line balancing and sequencing

    Uddin, M. K., Cavia Soto, M. & Martinez Lastra, J. L., 2010, In : Assembly Automation. 30, 2, p. 164-172

    Research output: Contribution to journalArticleScientificpeer-review

  43. Published

    Anisotropic viscodamage-viscoplastic consistency constitutive model with a parabolic cap for rocks with brittle and ductile behavior

    Saksala, T. & Ibrahimbegovic, A., 2014, In : International Journal of Rock Mechanics and Mining Sciences. 70, p. 460-473 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    An open modelling approach for availability and reliability of systems

    Penttinen, J-P., Niemi, A., Gutleber, J., Koskinen, K., Coatanea, E. & Laitinen, J., Mar 2019, In : Reliability Engineering and System Safety. 183, p. 387-399 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Published

    A novel method of vibration modes selection for improving accuracy of frequency-based damage detection

    Pan, J., Zhang, Z., Wu, J., Ramakrishnan, K. & Singh, H. K., 15 Feb 2019, In : Composites Part B : Engineering. 159, p. 437-446 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    A numerical model for the calculation of fretting fatique crack initiation for a smooth line contact

    Lehtovaara, A., Lönnqvist, C. & Mäntylä, A., 2010, In : Tribologia - Finnish Journal of Tribology. 29, 1, p. 7-16

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    A packet scheduler for real-time 6LoWPAN wireless networks in manufacturing systems

    Santillan Martinez, G., Delamer, I. M. & Martinez Lastra, J. L., 2014, In : Journal of Intelligent Manufacturing. 10845, 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    A performance evaluation concept for production systems in an SME network

    Mahmood, K., Lanz, M., Toivonen, V. & Otto, T., 27 Jun 2018, In : Procedia CIRP. 72, p. 603-608 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    A Petri net-based approach to incremental modelling of flow and resources in service-oriented manufacturing systems

    Popescu, C., Cavia Soto, M. & Martinez Lastra, J. L., 2012, In : International Journal of Production Research. 50, 2, p. 325-343

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    Application of a Capability-based Adaptation Methodology to a Small-size Production System

    Järvenpää, E., Lanz, M. & Tuokko, R., 2016, In : International Journal of Manufacturing Technology and Management. 30, 1/2, p. 67-86 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  51. Published

    A Semantic web services-based approach for production systems control

    Puttonen, J., Lobov, A., Cavia Soto, M. A. & Martinez Lastra, J. L., 2010, In : Advanced Engineering Informatics. 24, 3, p. 285-299

    Research output: Contribution to journalArticleScientificpeer-review

  52. Published

    A Survey of Analysis, Modeling, and Diagnostics of Diesel Fuel Injection Systems

    Krogerus, T. R., Hyvönen, M. P. & Huhtala, K. J., 2016, In : Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 138, 8, p. 1 11 p., 081501.

    Research output: Contribution to journalArticleScientificpeer-review

  53. Published

    Augmented reality aiding collimator exchange at the LHC

    Martinez, H., Fabry, T., Laukkanen, S., Mattila, J. & Tabourot, L., 2014, In : Nuclear instruments and Methods in Physics Research Section A: Accelerators Spectrometers Detectors and Associated Equipment. 763, p. 354-363 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  54. Published

    Automated object locator in a forest forwarder

    Hahto, A., Mattila, J. & Koivisto, H., 2010, In : Applied Artificial Intelligence. 24, 7, p. 711-721

    Research output: Contribution to journalArticleScientificpeer-review

  55. Published

    Automatic design of marine structures by using successive response surface method

    Pajunen, S. & Heinonen, O., 2013, In : Structural and Multidisciplinary Optimization. p. 1-9 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  56. Published

    Automotive transmission system design based on reliability parameters

    Douzi, I. K., Virtanen, S. & Verma, A. K., 2012, In : Journal of Reliability and Statistical Studies. 5, 2, p. 2229-5666

    Research output: Contribution to journalArticleScientificpeer-review

  57. Published

    Availability modeling approach for future circular colliders based on the LHC operation experience

    Niemi, A., Apollonio, A., Gutleber, J., Sollander, P., Penttinen, J-P. & Virtanen, S., 2016, In : Physical Review Special Topics: Accelerators and Beams. 19, 12, 121003.

    Research output: Contribution to journalArticleScientificpeer-review

  58. Published

    Breaking down the requirements: Reliability in remote handling software

    Alho, P. & Mattila, J., 2013, In : Fusion Engineering and Design. 88, 9-10, p. 1912-1915 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  59. Published

    Brownfield Process: A method for modular product family development aiming for product configuration

    Pakkanen, J., Juuti, T. & Lehtonen, T., 2016, In : DESIGN STUDIES. 45B, p. 210-241 32 p.

    Research output: Contribution to journalArticleScientificpeer-review

  60. Published

    Bubble dynamics and interactions with a pair of micro pillars in tandem

    Elcocka, D., Honkanen, M., Kuoc, C., Amitaya, M. & Pelesa, Y., 2011, In : International Journal of Multiphase Flow. 37, 5, p. 440-452

    Research output: Contribution to journalArticleScientificpeer-review

  61. Published

    Calibration and compensation of deflections and compliances in remote handling equipment configurations

    Kivelä, T., Saarinen, H., Mattila, J., Hämäläinen, V., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2043-2046

    Research output: Contribution to journalArticleScientificpeer-review

  62. Published

    Capability Matchmaking Procedure to Support Rapid Configuration and Re-configuration of Production Systems

    Järvenpää, E., Siltala, N., Hylli, O. & Lanz, M., Sep 2017, In : Procedia Manufacturing. 11, p. 1053-1060 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  63. Published

    Categorization of ITER remote handling operations

    Salminen, K., Aha, L., Saarinen, H., Siuko, M., Mattila, J. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2075-2077

    Research output: Contribution to journalArticleScientificpeer-review

  64. Published

    Cavitation erosion resistance assessment and comparison of three francis turbine runner materials

    Ylönen, M., Saarenrinne, P., Miettinen, J., Franc, J-P., Fivel, M. & Nyyssönen, T., 26 Oct 2018, In : Materials Performance and Characterization. 7, 5, p. 1107-1126 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  65. Published

    Challenges of Knowledge and Information Management during New Product Introduction: Experiences from a Finnish Multinational Company

    Järvenpää, E., Kopra, M-J. & Lanz, M., 2016, In : Interdisciplinary Journal of Information, Knowledge, and Management. 11, p. 285 308 p.

    Research output: Contribution to journalArticleScientificpeer-review

  66. Published

    Characterization of cracks formed in large flat-on-flat fretting contact

    Juoksukangas, J., Nurmi, V., Hintikka, J., Vippola, M., Lehtovaara, A., Mäntylä, A., Vaara, J. & Frondelius, T., Jul 2019, In : International Journal of Fatigue. 124, p. 361-370 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  67. Published

    Combined continuum damage-embedded discontinuity model for explicit dynamic fracture analyses of quasi-brittle materials

    Saksala, T., Brancherie, D., Harari, I. & Ibrahimbegovic, A., 2015, In : International Journal for Numerical Methods in Engineering. 101, 3, p. 230-250 21 p.

    Research output: Contribution to journalArticleScientificpeer-review

  68. Published

    Command and Control application framework for interoperable heterogeneous ITER Remote Handling devices

    Tuominen, J., Muhammad, A., Mattila, J., Aha, L., Saarinen, H., Siuko, M., Hamilton, D. & Semerero, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2067-2070

    Research output: Contribution to journalArticleScientificpeer-review

  69. Published

    Comparative environmental impacts of additive and subtractive manufacturing technologies

    Paris, H., Mokhtarian, H., Coatanéa, E., Museau, M. & Ituarte, I. F., 2016, In : CIRP Annals: Manufacturing Technology. 65, 1, p. 29-32

    Research output: Contribution to journalArticleScientificpeer-review

  70. Published

    Concept design of the cassette toroidal mover

    Mäkinen, H., Järvenpää, J., Valkama, P., Väyrynen, J., Amjad, F., Siuko, M., Mattila, J., Semeraro, L. & Esque, S., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2092-2095

    Research output: Contribution to journalArticleScientificpeer-review

  71. Published

    Concept design of the DEMO divertor cassette-to-vacuum vessel locking system adopting a systems engineering approach

    Di Gironimo, G., Carfora, D., Esposito, G., Lanzotti, A., Marzullo, D. & Siuko, M., May 2015, In : Fusion Engineering and Design. 94, p. 72-81 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  72. Published

    Concepts, methods and tools for individualized production

    Lanz, M. & Tuokko, R., 1 Apr 2017, In : PRODUCTION ENGINEERING. 11, 2, p. 205-212 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  73. Published

    Conjugated heat transfer from a uniformly heated plate and a plate fin with uniform base heat flux

    Lindstedt, M. & Karvinen, R., Apr 2017, In : International Journal of Heat and Mass Transfer. 107, p. 89-95 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  74. Published

    Conjugated Heat Transfer Simulation of a Fin-and-Tube Heat Exchanger

    Välikangas, T. & Karvinen, R., 2018, In : Heat Transfer Engineering. 39, 13-14, p. 1192-1200 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  75. Published

    Conjugate heat transfer in a plate - One surface at constant temperature and the other cooled by forced or natural convection

    Lindstedt, M. & Karvinen, R., 2013, In : International Journal of Heat and Mass Transfer. 66, p. 489-495 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  76. Published

    Considering aspects of lean, agility, and sustainability in digital manufacturing systems

    Nylund, H., Kirman, B., Koho, M., Tapaninaho, M. & Torvinen, S., 2012, In : International Journal of Advanced Manufacturing Systems. 14, 2, p. 9-16

    Research output: Contribution to journalArticleScientificpeer-review

  77. Published

    Context-sensitive optimisation of the key performance indicators for FMS

    Uddin, M. K., Puttonen, J. & Martinez Lastra, J. L., 2015, In : International Journal of Computer Integrated Manufacturing. 28, 9, p. 958-971 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  78. Published

    Continuum approach for modeling fatigue in amorphous glassy polymers. Applications to the investigation of damage-ratcheting interaction in polycarbonate

    Holopainen, S., Barriere, T., Cheng, G. & Kouhia, R., Apr 2017, In : International Journal of Plasticity. 91, p. 109-133 24 p.

    Research output: Contribution to journalArticleScientificpeer-review

  79. Published

    Continuum approach for modelling transversely isotropic high-cycle fatigue

    Holopainen, S., Kouhia, R. & Saksala, T., 1 Nov 2016, In : EUROPEAN JOURNAL OF MECHANICS A: SOLIDS. 60, p. 183-195

    Research output: Contribution to journalArticleScientificpeer-review

  80. Published

    Contribution of maxwell stress in air on the deformations of induction machines

    Fonteyn, K. A., Belahcen, A., Rasilo, P., Kouhia, R. & Arkkio, A., 2012, In : Journal of Electrical Engineering and Technology. 7, 3, p. 336-341 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  81. Published

    Customized dimensional analysis conceptual modelling framework for design optimization—a case study on the cross-flow micro turbine model

    Woldemariam, E. T., Coatanéa, E., Wang, G. G., Lemu, H. G. & Wu, D., 2019, In : Engineering Optimization. 51, 7, p. 1168-1184

    Research output: Contribution to journalArticleScientificpeer-review

  82. Published

    Damage-viscoplastic consistency model for rock fracture in heterogeneous rocks under dynamic loading

    Saksala, T., 2010, In : International Journal for Numerical and Analytical Methods in Geomechanics. 34, 10, p. 1041-1062

    Research output: Contribution to journalArticleScientificpeer-review

  83. Published

    Damage-viscoplastic consistency model with a parabolic cap for rocks with brittle and ductile behavior under low-velocity impact loading

    Saksala, T., 2010, In : International Journal for Numerical and Analytical Methods in Geomechanics. 34, 13, p. 1362-1386

    Research output: Contribution to journalArticleScientificpeer-review

  84. Published

    Damage-viscoplastic model based on the Hoek-Brown criterion for numerical modeling of rock fracture

    Saksala, T., 2015, In : Rakenteiden mekaniikka. 48, 2, p. 99-114 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  85. Published

    Data analysis process of working hydraulics of small mobile machine

    Krogerus, T., Rokala, M. & Koskinen, K. T., 2012, In : International Journal of Fluid Power. 13, 3, p. 5-15

    Research output: Contribution to journalArticleScientificpeer-review

  86. Published

    Department of Intelligent Hydraulics and Automation, Tampere University of Technology, Finland

    Koskinen, K. T., 2010, In : Journal of the Japan Fluid Power System Society. 41, 1, p. 35-40

    Research output: Contribution to journalArticleScientificpeer-review

  87. Published

    Detection and isolation of leakage and valve faults in hydraulic systems in varying loading conditions, Part 1: Global sensitivity analysis

    Nurmi, J. & Mattila, J., 2011, In : International Journal of Fluid Power. 12, 3, p. 41-51

    Research output: Contribution to journalArticleScientificpeer-review

  88. Published

    Detection and isolation of leakage and valve faults in hydraulic systems in varying loading conditions, Part 2: Fault detection and isolation scheme

    Nurmi, J. & Mattila, J., 2012, In : International Journal of Fluid Power. 13, 1, p. 17-27

    Research output: Contribution to journalArticleScientificpeer-review

  89. Published

    Development of a complete contact fretting test device

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 2013, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 227, 6, p. 570-578

    Research output: Contribution to journalArticleScientificpeer-review

  90. Published

    Development of a test device for the evaluation of hydrodynamic lubrication in thrust bearings

    Pasanen, A., Kleemola, J. & Lehtovaara, A., 2008, In : Tribologia - Finnish Journal of Tribology. 27, 4, p. 12-20

    Research output: Contribution to journalArticleScientificpeer-review

  91. Published

    Development of a test device for the evaluation of journal bearings

    Sandvik, K., Lehtovaara, A., Makkonen, E., Kallio, M., Kuvaja, K. & Kuokkala, V-T., 2012, In : Tribologia - Finnish Journal of Tribology. 31, 1-2, p. 12-21

    Research output: Contribution to journalArticleScientificpeer-review

  92. Published

    Digital Imaging and Piezo-dispenser Actuator in Automatic Flocculation Control

    Tomperi, J., Honkanen, M., Kallio, P., Leiviskä, K., Saarenrinne, P., Joensuu, I. & Piironen, M., 2012, In : Sensors and Transducers. 136, 1, p. 83-95

    Research output: Contribution to journalArticleScientificpeer-review

  93. Published

    Direct computation of critical equilibrium states for spatial beams and frames

    Mäkinen, J., Kouhia, R., Fedoroff, A. & Marjamäki, H., 2012, In : International Journal for Numerical Methods in Engineering. 89, 2, p. 135-153

    Research output: Contribution to journalArticleScientificpeer-review

  94. Published

    Displacement control of a mobile crane using a digital hydraulic power management system

    Heikkilä, M. & Linjama, M., 2013, In : Mechatronics. 23, 4, p. 452-461 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  95. Published

    Disrupted flow sensing impairs hydrodynamic performance and increases the metabolic cost of swimming in the yellowtail kingfish, Seriola Lalandi

    Yanase, K., Herbert, N. A. & Montgomery, J. C., 2012, In : Journal of Experimental Biology. 215, 22, p. 3944-3954

    Research output: Contribution to journalArticleScientificpeer-review

  96. Published

    Divertor cassette locking system remote handling trials with WHMAN at DTP2

    Lyytikäinen, V., Kinnunen, P., Koivumäki, J., Mattila, J., Siuko, M., Esque, S. & Palmer, J., 2013, In : Fusion Engineering and Design. 88, 9-10, p. 2181-2185 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  97. Published

    DTP2 control room operator and remote handing operation designer responsibilities and information available to them

    Aha, L., Salminen, K., Hahto, A., Saarinen, H., Mattila, J., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2078-2081

    Research output: Contribution to journalArticleScientificpeer-review

  98. Published

    Dynamics of a True Moving Bed separation process: Linear model identification and advanced process control

    Nogueira, I. B. R., Ribeiro, A. M., Martins, M. A. F., Rodrigues, A. E., Koivisto, H. & Loureiro, J. M., 30 Jun 2017, In : Journal of Chromatography A. 1504

    Research output: Contribution to journalArticleScientificpeer-review

  99. Published

    Economic analysis of hydrogen production by methane thermal decomposition: Comparison to competing technologies

    Keipi, T., Tolvanen, H. & Konttinen, J., 1 Mar 2018, In : Energy Conversion and Management. 159, p. 264-273 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  100. Published

    Effect of glass temperature before cooling and cooling rate on residual stresses in tempering

    Aronen, A. & Karvinen, R., Mar 2018, In : Glass Structures Engineering. 3, 1, p. 3-15

    Research output: Contribution to journalArticleScientificpeer-review

  101. Published

    Effect of humidity on triboelectric charging in a vertically vibrated granular bed: Experiments and modeling

    Kolehmainen, J., Sippola, P., Raitanen, O., Ozel, A., Boyce, C. M., Saarenrinne, P. & Sundaresan, S., 2017, In : Chemical Engineering Science. 173, p. 363-373 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  102. Published

    Effect of start-up schemes and amplitude of tangential motion on friction behavior in fretting point contact

    Hintikka, J., Lehtovaara, A. & Lönnqvist, C., 2011, In : Tribology International. 44, 11, p. 1535-1543

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...13 Next
Download list To download, please limit the number of search results to 1,000 or less.