Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Article › Scientific › Peer-reviewed
  2. Published

    Effect of start-up schemes and amplitude of tangential motion on friction behavior in fretting point contact

    Hintikka, J., Lehtovaara, A. & Lönnqvist, C., 2011, In : Tribology International. 44, 11, p. 1535-1543

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    Effects of strain and strain rate on the abrasive wear behavior of high manganese austenitic steel

    Lindroos, M., Kuokkala, V-T., Lehtovaara, A. & Kivikytö-Reponen, P., 2013, In : Key Engineering Materials. 527, p. 211-216 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Employing Knowledge on Causal Relationship to Assist Multidisciplinary Design Optimization

    Wu, D., Coatanea, E. & Wang, G. G., Apr 2019, In : Journal of Mechanical Design, Transactions of the ASME. 141, 4, 041402.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Energy efficiency in double disc refining - Influence of intensity by segment design

    Muhic, D., Huhtanen, J-P., Sundström, L., Sandberg, C., Ullmar, M., Vuorio, P. & Engstrand, P., 2011, In : Nordic Pulp and Paper Research Journal. 3, p. 1-8 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    Energy efficiency of three-chamber cylinder with digital valve system

    Huova, M., Laamanen, A. & Linjama, M., 2010, In : International Journal of Fluid Power. 11, 3, p. 15-22

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Energy saving in working hydraulics of long booms in heavy working vehicles

    Immonen, P., Ponomarev, P., Åman, R., Ahola, V., Uusi-Heikkilä, J., Laurila, L., Handroos, H., Niemelä, M., Pyrhönen, J. & Huhtala, K., 1 May 2016, In : Automation in Construction. 65, p. 125-132 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    Engineering Change Management Data Analysis from the Perspective of Information Quality

    Jokinen, L., Vainio, V. & Pulkkinen, A., 2017, In : Procedia Manufacturing. 11, p. 1626-1633 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Enhanced industrial maintenance work task planning by using virtual engineering tools and haptic user interfaces

    Leino, S-P., Lind, S., Poyade, M., Kiviranta, S., Multanen, P., Reyes-Lecuona, A., Mäkiranta, A. & Muhammad, A., 2009, In : Lecture Notes in Computer Science. 5622, p. 346-354

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Enhancement of the use of digital mock-ups in the verification and validation process for ITER remote handling systems

    Sibois, R., Salminen, K., Siuko, M., Mattila, J. & Määttä, T., 2013, In : Fusion Engineering and Design. 88, 9-10, p. 2190-2193 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. E-pub ahead of print

    Estimation of Cavitation Pit Distributions by Acoustic Emission

    Ylönen, M., Saarenrinne, P., Miettinen, J., Franc, J-P., Fivel, M. & Laakso, J., 2019, In : JOURNAL OF HYDRAULIC ENGINEERING: ASCE. 146, 2, 11 p., 04019064.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Evaluation of lubrication conditions in gear contacts using contact resistance and bulk temperature measurements

    Kleemola, J. & Lehtovaara, A., 2010, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 224, 4, p. 367-375

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Evidence against a correlation between ease of use and actual use of a device in a walk-in virtual environment

    Tiainen, T., Ellman, A. & Kaapu, T., 2013, In : Human Technology: An Interdisciplinary Journal on Humans in ICT Environments Human Technology. 9, 1, p. 56-71 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Exercise loading history and femoral neck strength in a sideways fall: A three-dimensional finite element modeling study.

    Abe, S., Narra, N., Nikander, R., Hyttinen, J., Kouhia, R. & Sievänen, H., 2016, In : Bone. 92, p. 9-17 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Experimental and numerical study of a choke valve in a turbulent flow

    Huovinen, M., Kolehmainen, J., Koponen, P., Nissilä, T. & Saarenrinne, P., 2015, In : Flow Measurement and Instrumentation. 45, p. 151-161 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Experimental and numerical study of a drill bit drop tests on Kuru Granite

    Fourmeau, M., Kane, A. & Hokka, M., Jan 2017, In : Philosophical Transactions of the Royal Society A: Mathematical Physical and Engineering Sciences. 375, 2085

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Experimental and numerical study of wall layer development in a tribocharged fluidized bed

    Sippola, P., Kolehmainen, J., Ozel, A., Liu, X., Saarenrinne, P. & Sundaresan, S., 25 Aug 2018, In : Journal of Fluid Mechanics. 849, p. 860-884 25 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Experimental Comparisons of Sliding Mode Controlled Pneumatic Muscle and Cylinder Actuators

    Jouppila, V., Gadsden, A. S. & Ellman, A., 2014, In : Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME. 136, 4, 10 p., 044503.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Fatigue behavior of laser clad round steel bars

    Tuominen, J., Näkki, J., Poutala, J., Miettinen, J., Peltola, T., Vuoristo, P., Rasehorn, I., Alam, M. M. & Kaplan, A. F. H., 2014, In : Journal of Laser Applications. p. 1-10 10 p., 012006.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Feed-hopper level estimation and control in cone crushers

    Itävuo, P., Hulthén, E. & Vilkko, M., 15 Aug 2017, In : Minerals Engineering. 110, p. 82-95 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    Formal resource and capability models supporting re-use of manufacturing resources

    Järvenpää, E., Lanz, M. & Siltala, N., Feb 2018, In : Procedia Manufacturing. 19, p. 87-94 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Framework for extended digital manufacturing systems

    Nylund, H. & Andersson, P. H., 2011, In : International Journal of Computer Integrated Manufacturing. 24, 5, p. 446-456

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Fretting fatigue and friction of quenched and tempered steel in dry contact with aluminum bronze

    Hintikka, J., Lehtovaara, A. & Mäntylä, A., 2013, In : Wear. 308, 1-2, p. 155-165 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Friction characteristics of a multi-chamber cylinder for digital hydraulics

    Cho, S. H., Niemi-Pynttäri, O. & Linjama, M., 2016, In : Proceedings of the institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science. 230, 5, p. 685-698 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Functional failure modes cause-consequence logic suited for mobile robots used at scientific facilities

    Douzi, I. K., Virtanen, S., Bonnal, P. & Verma, A. K., 2014, In : Reliability Engineering and System Safety. 129, p. 10-18 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Function modeling combined with physics-based reasoning for assessing design options and supporting innovative ideation

    Mokhtarian, H., Coatanea, E. & Paris, H., 2017, In : AI EDAM - Artificial Intelligence for Engineering Design Analysis and Manufacturing. 31, 4, p. 476-500 25 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Gain scheduled state feedback velocity control of hydrostatic drive transmissions

    Backas, J., Ghabcheloo, R. & Huhtala, K., Jan 2017, In : Control Engineering Practice. 58, p. 214-224

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    Gap Formation During Cyclic Testing of Flexor Tendon Repair

    Linnanmäki, L., Göransson, H., Havulinna, J., Sippola, P., Karjalainen, T. & Leppänen, O. V., Jun 2018, In : Journal of Hand Surgery. 43, 6, p. 570.e1-570.e8

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    Genetic optimization of a fast solenoid actuator for a digital hydraulic valve

    Pellikka, M., Ahola, V., Söderlund, L. & Uusitalo, J-P., 2011, In : International Journal of Fluid Power. 12, 2, p. 49-56

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    Global energy-optimised redundancy resolution in hydraulic manipulators using dynamic programming

    Nurmi, J. & Mattila, J., Jan 2017, In : Automation in Construction. 73, January 2017, p. 120-134 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Heat management for water-hydraulic systems at ITER remote handling

    Väyrynen, J., Aha, L., Mattila, J., Esqué, S. & Sharratt, R., Sep 2019, In : Fusion Engineering and Design. 146, p. 2314-2318 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    High-Linear Digital Hydraulic Valve Control by an Equal Coded Valve System and Novel Switching Schemes

    Paloniitty, M. & Linjama, M., 2018, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 232, 3, p. 258-269

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    High performance nonlinear motion/force controller design for redundant hydraulic construction crane automation

    Koivumäki, J. & Mattila, J., 1 Mar 2015, In : Automation in Construction. 51, p. 59-77 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    High speed, high strength microwelding of Si/glass using ps-laser pulses

    Miyamoto, I., Okamoto, Y., Hansen, A., Vihinen, J., Amberla, T. & Kangastupa, J., 9 Feb 2015, In : Optics Express. 23, 3, p. 3427-3439 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    High surface quality welding of aluminum using adjustable ring-mode fiber laser

    Maina, M. R., Okamoto, Y., Okada, A., Närhi, M., Kangastupa, J. & Vihinen, J., 1 Aug 2018, In : Journal of Materials Processing Technology. 258, p. 180-188 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    High temperature erosion wear of cermet particles reinforced self-fluxing alloy HVOF sprayed coatings

    Surzhenkov, A., Goljandin, D., Traksmaa, R., Viljus, M., Talviste, K., Aruniit, A., Latokartano, J. & Kulu, P., 27 Jul 2015, In : Materials Science: Medziagotyra. 21, 3, p. 386-390 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    Hydrofluoric-nitric-sulphuric-acid surface treatment of tungsten for carbon fibre-reinforced composite hybrids in space applications

    Kanerva, M., Johansson, L. -S., Campbell, J. M., Revitzer, H., Sarlin, E., Brander, T. & Saarela, O., 15 Feb 2015, In : Applied Surface Science. 328, p. 418-427 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    Identifying and addressing challenges in the engineering design of modular systems – case studies in the manufacturing industry

    Pakkanen, J., Juuti, T. & Lehtonen, T., 29 Nov 2018, In : Journal of Engineering Design. 30 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    Image-Based Stress and Strain Measurement of Wood in the Split-Hopkinson Pressure Bar

    Moilanen, C. S., Saarenrinne, P., Engberg, B. A. & Björkqvist, T., 2015, In : Measurement Science and Technology. 26, 8, 085206.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    Impact loading history modulates hip fracture load and location: A finite element simulation study of the proximal femur in female athletes

    Abe, S., Narra Girish, N., Nikander, R., Hyttinen, J., Kouhia, R. & Sievänen, H., 25 Jul 2018, In : Journal of Biomechanics. 76, p. 136-143 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Impact of mechanical and enzymatic pretreatments on softwood pulp fiber wall structure studied with NMR spectroscopy and X-ray scattering

    Virtanen, T., Penttilä, P. A., Maloney, T. C., Grönqvist, S., Kamppuri, T., Vehviläinen, M., Serimaa, R. & Maunu, S. L., Jun 2015, In : Cellulose. 22, 3, p. 1565-1576 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Implementation of a direct procedure for critical point computations using preconditioned iterative solvers

    Kouhia, R., Tůma, M., Mäkinen, J., Fedoroff, A. & Marjamäki, H., Oct 2012, In : Computers & Structures. 108-109, p. 110-117 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  43. Published

    Implementation of capability matchmaking software facilitating faster production system design and reconfiguration planning

    Järvenpää, E., Siltala, N., Hylli, O. & Lanz, M., Oct 2019, In : Journal of Manufacturing Systems. 53, p. 261-270 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    Importance of maintenance data quality in extended warranty simulation

    Mahlamäki, K., Niemi, A., Jokinen, J. & Borgman, J., 1 Jan 2016, In : International Journal of COMADEM. 19, 1, p. 3-10 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Published

    Improving concept design of divertor support system for FAST tokamak using TRIZ theory and AHP approach

    Di Ginorimo, G., Carfora, D., Esposito, G., Labate, C., Mozzillo, R., Renno, F., Lanzotti, A. & Siuko, M., 2014, In : Fusion Engineering and Design. 88, 11, p. 3014-3020 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Improving Recovery Boiler Availability through Understanding Fume Behavior

    Leppänen, A. & Välimäki, E., Mar 2016, In : TAPPI Journal. 15, 3, p. 187-193

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Improving the performance of DTP2 bilateral teleoperation control system with haptic augmentation

    Viinikainen, M., Tuominen, J., Alho, P. & Mattila, J., 2014, In : Fusion Engineering and Design. 89, 9-10, p. 2278-2282 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    Influence of damage on inhomogeneous deformation behavior of amorphous glassy polymers. Modeling and algorithmic implementation in a finite element setting

    Holopainen, S., 2014, In : Engineering Fracture Mechanics. 114, p. 28-50 23 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Influence of strain rate, temperature and fatigue on the radial compression behaviour of Norway spruce

    Moilanen, C., Björkqvist, T., Ovaska, M., Koivisto, J., Miksic, A., Engberg, B. A., Salminen, L. I., Saarenrinne, P. & Alava, M., 27 Jun 2017, In : Holzforschung. 71, 6, p. 505-514 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    Interference-based overlapping particle tracking velocimetry for fluidized beds

    Kolehmainen, J., Elfvengren, J. & Saarenrinne, P., 2014, In : Experiments in Fluids. 55, 1825, p. 1-15 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  51. Published

    Interoperability of remote handling control system software modules at Divertor Test Platform 2 using middleware

    Tuominen, J., Rasi, T., Mattila, J., Siuko, M., Esque, S. & Hamilton, D., 2013, In : Fusion Engineering and Design. 88, 9-10, p. 2177-2180 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  52. Published

    Is the future of fluid power digital?

    Scheidl, R., Linjama, M. & Schmidt, S., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 226, 6, p. 721-723

    Research output: Contribution to journalArticleScientificpeer-review

  53. Published

    Jammed on/off valve fault compensation with distributed digital valve system

    Siivonen, L., Linjama, M., Huova, M. & Vilenius, M., 2009, In : International Journal of Fluid Power. 10, 2, p. 73-82

    Research output: Contribution to journalArticleScientificpeer-review

  54. Published

    Joint-Space Kinematic Model for Gravity-Referenced Joint Angle Estimation of Heavy-Duty Manipulators

    Vihonen, J., Mattila, J. & Visa, A., 2017, In : IEEE Transactions on Instrumentation and Measurement. 66, 12, p. 3280-3288

    Research output: Contribution to journalArticleScientificpeer-review

  55. Published

    Katsaus mikropolaariseen kontinuumimalliin

    Kouhia, R., 2013, In : Rakenteiden mekaniikka. 46, 3, p. 70-90 21 p.

    Research output: Contribution to journalArticleScientificpeer-review

  56. Published

    Kinodynamic Motion Planning for Autonomous Vehicles

    Choi, J., 2014, In : international Journal of Advanced Robotic Systems. 11, 90, p. 1-14 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  57. Published

    Knowledge-based optimization of artificial neural network topology for additive manufacturing process modeling: a case study for fused deposition modeling: A new approach and case study for fused deposition modeling

    Nagarajan, H. P. N., Mokhtarian, H., Jafarian, H., Dimassi, S., Bakrani Balani, S., Hamedi, A., Coatanea, E., Wang, G. G. & Kari R., H., Feb 2019, In : Journal of Mechanical Design. 141, 2

    Research output: Contribution to journalArticleScientificpeer-review

  58. Published

    Lagrangian tracking of bubbles interacting with pin-fins in a microchannel

    Honkanen, M., Elcock, D., Kuo, C-J., Peles, Y. & Amitay, M., 2011, In : Experiments in Fluids. 50, 6, p. 1527-1538

    Research output: Contribution to journalArticleScientificpeer-review

  59. Published

    Landowners’ willingness to promote bioenergy production on wasteland − future impact on land use of cutaway peatlands

    Laasasenaho, K., Lensu, A., Rintala, J. & Lauhanen, R., 1 Dec 2017, In : Land Use Policy. 69, p. 167-175 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  60. Laser treatment of PVD coated carbon steels and powder steels

    Surzhenkov, A., Kulu, P., Gregor, A., Vuoristo, P., Latokartano, J. & Rupponen, M., 2008, In : Materials Science: Medziagotyra. 14, 4, p. 301-305

    Research output: Contribution to journalArticleScientificpeer-review

  61. Published

    Lasin karkaisun laatuongelmat

    Aronen, A., 2011, In : Rakenteiden mekaniikka. 44, 2, p. 140-155

    Research output: Contribution to journalArticleScientificpeer-review

  62. Published

    Low temperature nanoparticle sintering with continuous wave and pulse lasers

    Kumpulainen, T., Pekkanen, J., Valkama, J., Laakso, J., Tuokko, R. & Mäntysalo, M., 2011, In : Optics and laser technology. 43, 3, p. 570-576

    Research output: Contribution to journalArticleScientificpeer-review

  63. Published

    Magnetomechanical coupled FE simulations of rotating electrical machines

    Belahcen, A., Fonteyn, K., Kouhia, R., Rasilo, P. & Arkkio, A., 2013, In : COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 32, 5, p. 1484-1499 16 p., 17095978.

    Research output: Contribution to journalArticleScientificpeer-review

  64. Published

    Mass balance control of crushing circuits

    Itävuo, P., Hulthén, E., Yahyaei, M. & Vilkko, M., May 2019, In : Minerals Engineering. 135, p. 37-47 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  65. Published

    Measuring and Modelling Hydraulic Fluid Dynamics at High Pressure - Accurate and Simple Approach

    Karjalainen, J-P., Karjalainen, R. & Huhtala, K., 2012, In : International Journal of Fluid Power. 13, 2, p. 51-59

    Research output: Contribution to journalArticleScientificpeer-review

  66. Published

    Mechanical analysis of a pneumatically actuated concentric double-shell structure for cell stretching

    Zhao, F., Kreutzer, J., Pajunen, S. & Kallio, P., 2014, In : Micromachines. 5, 4, p. 868-885 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  67. Published

    Methodology for implementing universal gripping solution for robot application

    Azim, M. S., Lobov, A. & Pastukhov, A., 2019, In : Proceedings of the Estonian Academy of Sciences. 68, 4, p. 413-420 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  68. Published

    Methods to reduce the CO2 concentration of educational buildings utilizing internal ventilation by transferred air

    Kalema, T. & Viot, M., 2013, In : Indoor Air. p. 1-10 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  69. Published

    Micro and desktop factories for micro/meso-scale manufacturing applications and future visions

    Tuokko, R., Järvenpää, E., Heikkilä, R. & Nurmi, A., 2013, In : Applied Mechanics and Materials. 289, 2, p. 1-12 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  70. Published

    Micro Manufacturing Unit and the Corresponding 3D-Model for the Digital Twin

    Lohtander, M., Garcia, E., Lanz, M., Volotinen, J., Ratava, J. & Kaakkunen, J., 2018, In : Procedia Manufacturing. 17, p. 55-61

    Research output: Contribution to journalArticleScientificpeer-review

  71. Published

    Microstructure-property relationships of novel ultra-high strength press hardening steels

    Järvinen, H., Honkanen, M., Oja, O., Järvenpää, M. & Peura, P., 2019, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50, 2, p. 816-836 21 p.

    Research output: Contribution to journalArticleScientificpeer-review

  72. Published

    Minimizing the Maximum Curvature of Quadratic Bezier Curves with a Tetragonal Concave Polygonal Boundary Constraint

    Choi, J., Curry, R. E. & Elkaim, G. H., 2011, In : Computer-Aided Design. 44, 4, p. 1-22 22 p.

    Research output: Contribution to journalArticleScientificpeer-review

  73. Published

    Model-based force and position tracking control of a multi-pressure hydraulic cylinder

    Linjama, M. & Huova, M., Jan 2018, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 232, 3, p. 324-335

    Research output: Contribution to journalArticleScientificpeer-review

  74. Published

    Model-based force and position tracking control of an asymmetric cylinder with a digital hydraulic valve

    Linjama, M., Huova, M. & Huhtala, K., 1 Sep 2016, In : International Journal of Fluid Power. 17, 3, p. 163-172

    Research output: Contribution to journalArticleScientificpeer-review

  75. Published

    Modeling and Experimental Characterization of Pressure Drop in Gravity-Driven Microfluidic Systems

    Mäki, A-J., Hemmilä, S., Hirvonen, J., Narra Girish, N., Kreutzer, J., Hyttinen, J. & Kallio, P., 1 Feb 2015, In : Journal of Fluids Engineering: Transactions of the ASME. 137, 2, p. 1-8 8 p., 021105.

    Research output: Contribution to journalArticleScientificpeer-review

  76. Published

    Modeling of Hysteresis Losses in Ferromagnetic Laminations under Mechanical Stress

    Rasilo, P., Singh, D., Aydin, U., Martin, F., Kouhia, R., Belahcen, A. & Arkkio, A., Mar 2016, In : IEEE Transactions on Magnetics. 52, 3, 4 p., 7300204.

    Research output: Contribution to journalArticleScientificpeer-review

  77. Published

    Modeling of Long-Term Behavior of Glassy Polymers

    Holopainen, S. & Wallin, M., 2013, In : Journal of Engineering Materials and Technology: Transactions of the ASME. 135, 1, 11 p., 011001.

    Research output: Contribution to journalArticleScientificpeer-review

  78. Published

    Modeling of the mechanical behavior of amorphous glassy polymers under variable loadings and comparison with state-of-the-art model predictions

    Holopainen, S., 2013, In : Mechanics of Materials. 66, p. 35-58 24 p.

    Research output: Contribution to journalArticleScientificpeer-review

  79. Published

    Modelling and analysis of fretting wear in rough point contacts in partial slip conditions

    Lehtovaara, A. & Lönnqvist, C., 2011, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 225, 10, p. 986-998

    Research output: Contribution to journalArticleScientificpeer-review

  80. Published

    Modelling and evaluation of the fretting fatigue cracking risk in smooth spherical contacts

    Lehtovaara, A., Rabb, R. & Pasanen, A., 2011, In : Tribology International. 44, 11, p. 1526-1534

    Research output: Contribution to journalArticleScientificpeer-review

  81. Published

    Modelling Capabilities for Functional Configuration of Part Feeding Equipment

    Hansson, M. N., Järvenpää, E., Siltala, N. & Madsen, O., 18 Sep 2017, In : Procedia Manufacturing. 11, p. 2051-2060 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  82. Published

    Modelling fume deposit growth in recovery boilers: effect of flue gas and deposit temperature

    Leppänen, A., Tran, H., Välimäki, E. & Oksanen, A., 2014, In : Journal of Science and Technology for Forest Products and Processes. 4, 1, p. 50-57 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  83. Published

    Modelling of Dynamic Rock Fracture Process with a Rate-Dependent Combined Continuum Damage-Embedded Discontinuity Model Incorporating Microstructure

    Saksala, T., 2016, In : Rock Mechanics and Rock Engineering. 49, p. 3947–3962 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  84. Published

    Multi-objective optimization of electronics heat sinks cooled by natural convection

    Lampio, K. & Karvinen, R., Sep 2016, In : Journal of Physics: Conference Series. 745, 3, 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  85. Published

    Muodonmuutoksen mitat kontinuumimekaniikassa

    Hartikainen, J., Kouhia, R., Mikkola, M. & Mäkinen, J., 9 Dec 2016, In : Rakenteiden mekaniikka. 49, 2, p. 86-99 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  86. Published

    Nonlinear model predictive energy management of hydrostatic drive transmissions

    Backas, J. & Ghabcheloo, R., 1 Mar 2019, In : Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. 233, 3, p. 335-347

    Research output: Contribution to journalArticleScientificpeer-review

  87. Published

    Novel bistable hammer valve for digital hydraulics

    Uusitalo, J-P., Ahola, V., Söderlund, L., Linjama, M., Juhola, M. & Kettunen, L., 2010, In : International Journal of Fluid Power. 11, 3, p. 35-44

    Research output: Contribution to journalArticleScientificpeer-review

  88. Published

    Novel Micro-Welding of Silicon and Glass by Ultrashort Pulsed Laser

    Okamoto, Y., Miyamoto, I., Vihinen, J. & Okada, A., 2014, In : Materials Science Forum. 783-786, p. 2792-2797 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  89. Published

    Numerical and experimental study of percussive drilling with a triple-button bit on Kuru granite

    Saksala, T., Gomon, D., Hokka, M. & Kuokkala, V-T., 2014, In : International Journal of Impact Engineering. 72, p. 56-66 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  90. Published

    Numerical modeling and experimentation of dynamic Brazilian disc test on Kuru granite

    Saksala, T., Hokka, M., Kuokkala, V-T. & Mäkinen, J., 2013, In : International Journal of Rock Mechanics and Mining Sciences. 59, April, p. 128-138 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  91. Published

    Numerical modeling of dynamic rock fracture with a combined 3D continuum viscodamage-embedded discontinuity model

    Saksala, T., Brancherie, D. & Ibrahimbegovic, A., 2016, In : International Journal for Numerical and Analytical Methods in Geomechanics. 40, 9, p. 1339–1357 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  92. Published

    Numerical modeling of fine particle and deposit formation in a recovery boiler

    Leppänen, A., Tran, H., Taipale, R., Välimäki, E. & Oksanen, A., 1 Aug 2014, In : Fuel. 129, p. 45-53 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  93. Published

    Numerical modelling of bit-rock fracture mechanisms in percussive drilling with a continuum approach

    Saksala, T., 2011, In : International Journal for Numerical and Analytical Methods in Geomechanics. 35, 13, p. 1483-1505

    Research output: Contribution to journalArticleScientificpeer-review

  94. Published

    Numerical study of the influence of hydrostatic and confining pressure on percussive drilling of hard rock

    Saksala, T., 2016, In : Computers and Geotechnics. 76, p. 120-128 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  95. Published

    On design and development of additional End-Effectors for the Cassette Multifunctional Mover

    Valkama, P., Mattila, J., Amjad, F., Väyrynen, J., Vilenius, M., Siuko, M., Semeraro, L. & Esque, S., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 1946-1949

    Research output: Contribution to journalArticleScientificpeer-review

  96. Published

    Online quality evaluation of tissue paper structure on new generation tissue machines

    Raunio, J-P., Löyttyniemi, T. & Ritala, R., 26 Mar 2018, In : Nordic Pulp and Paper Research Journal. 33, 1, p. 133-141 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  97. Published

    On optimisation of structures under stability constraints - a simple example

    Kouhia, R., Pajunen, S. & Poutala, J., 9 Dec 2016, In : Rakenteiden mekaniikka. 49, 2, p. 69-77 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  98. Published

    On the equivalence of minimum compliance and stress-constrained minimum weight design of trusses under multiple loading conditions

    Mela, K. & Koski, J., 2012, In : Structural and Multidisciplinary Optimization. 46, 5, p. 679-691

    Research output: Contribution to journalArticleScientificpeer-review

  99. Published

    On the orientation probability distribution of flexible fibres in a contracting channel flow

    Niskanen, H., Eloranta, H., Tuomela, J. & Hämäläinen, J., 2011, In : International Journal of Multiphase Flow. 37, 4, p. 336-345

    Research output: Contribution to journalArticleScientificpeer-review

  100. Published

    On the solution of non-linear diffusion equation

    Kouhia, R., 2013, In : Rakenteiden mekaniikka. 46, 4, p. 116-130 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  101. Published

    On the Updating of Domain OWL Models at Runtime in Factory Automation Systems

    Puttonen, J., Lobov, A. & Martinez Lastra, J. L., 2014, In : International Journal of Web Services Research. 11, 2, p. 46-66 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...13 Next
Download list To download, please limit the number of search results to 1,000 or less.