Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Article › Scientific › Not peer-reviewed
  2. Published

    Discussion: Is the future of fluid power digital? Response

    Linjama, M., Scheidl, R. & Schmidt, S., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 226, I6, p. 726-727

    Research output: Contribution to journalArticleScientific

  3. Published

    Erratum: 3D numerical modelling of bit-rock fracture mechanisms in percussive drilling with a multiple-button bit (vol 37, pg 309, 2013)

    Saksala, T., 2013, In : International Journal for Numerical and Analytical Methods in Geomechanics. 37, 3, p. 325-330 6 p.

    Research output: Contribution to journalArticleScientific

  4. Published

    GVT-Getriebe mit hydrostatischer Verstelleinheit

    Erkkilä, M. & Viitasalo, V., 2010, In : Mobile Maschinen. 1/2010, p. 32-33

    Research output: Contribution to journalArticleScientific

  5. Published

    Hydrauliikan komponenttipuhtausstandardien hyödyntäminen suomalaisessa konepajateollisuudessa

    Rinkinen, J., 2010, In : Fluid Finland. 1/2010, p. 18-23

    Research output: Contribution to journalArticleScientific

  6. Published

    Hydraulikomponenttien käyttöikä

    Rinkinen, J. & Immonen, A., 2010, In : Fluid Finland. 1/2010, p. 8-11

    Research output: Contribution to journalArticleScientific

  7. Published

    Kehitystä putkistopassin koulutusmateriaaliin

    Rinkinen, J. & Virta, S., 2010, In : Fluid Finland. 1/2010, p. 28-30

    Research output: Contribution to journalArticleScientific

  8. Published

    Koulutuksesta ja tutkimuksesta

    Huhtala, K., 2010, In : Fluid Finland. 9, 3-4, p. 6-6

    Research output: Contribution to journalArticleScientific

  9. Published

    M1-teknologialla voidaan rakentaa virtuaalisia oppimisympäristöjä ja konelaboratorioita

    Koskinen, K. T., Leino, T., Palonen, T. & Ranta, P., 2010, In : Fluid Finland. 2/2010, p. 18-20

    Research output: Contribution to journalArticleScientific

  10. Published

    Matkaraportti: Digitaalihydrauliikan seminaari marraskuisessa Linzissä

    Linjama, M., 2010, In : Fluid Finland. 1/2010, p. 12-14

    Research output: Contribution to journalArticleScientific

  11. E-pub ahead of print

    Reconfigurable manipulator simulation for robotics and multimodal machine learning application: Aaria: Aaria

    Hautakoski, A., Aref, M. M. & Mattila, J., 1 Mar 2018, In : arXiv.org. 1803.00532.

    Research output: Contribution to journalArticleScientific

  12. Published

    Reitinvalintaa rastilta seuraavalle

    Huhtala, K., 2010, In : Fluid Finland. 3-4, p. 7-7

    Research output: Contribution to journalArticleScientific

  13. Published

    Response to discussion with DA Hills et al., concerning the article "Development of a complete contact fretting test device" by J. Juoksukangas et al.

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 2014, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 228, 1, p. 127-128 2 p.

    Research output: Contribution to journalArticleScientific

  14. Published

    The energy balance of the electro-hydraulic linear actuation system

    Herranen, M., Huhtala, K. & Vilenius, M., 2010, In : Journal of Energy and Power Engineering. 4, 8, p. 57-63

    Research output: Contribution to journalArticleScientific

  15. Article › Scientific › Peer-reviewed
  16. Published

    3D numerical modelling of bit-rock fracture mechanisms in percussive drilling with a multiple-button bit

    Saksala, T., 2013, In : International Journal for Numerical and Analytical Methods in Geomechanics. 37, 3, p. 309-324

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    A comparison of rheology and FTIR in the study of polypropylene and polystyrene photodegradation

    Mylläri, V., Ruoko, T-P. & Syrjälä, S., 1 Jul 2015, In : Journal of Applied Polymer Science. 132, 28, 6 p., 42246.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    A concept and local implementation for industry-academy collaboration and life-long learning

    Lanz, M., Lobov, A., Katajisto, K. & Mäkelä, P., 23 Apr 2018, In : Procedia Manufacturing. 23, p. 189-194 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    A conceptual design and modeling framework for integrated additive manufacturing

    Mokhtarian, H., Coatanea, E., Paris, H., Mansor Mbow, M., Pourroy, F., René Marin, P., Vihinen, J. & Ellman, A., 28 Apr 2018, In : Journal of Mechanical Design. 140, 8, 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    A conceptual modeling and simulation framework for system Design

    Coatanea, E., Roca, R., Mokhtarian, H., Mokammel, F. & Ikkala, K., 1 Jul 2016, In : Computing in Science and Engineering. 18, 4, p. 42-52

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    A Continuum damage model based on Ottosen's four parameter failure criterion for concrete

    Tahaei Yaghoubi, S., Kouhia, R., Hartikainen, J. & Kolari, K., 2014, In : Rakenteiden mekaniikka. 47, 2, p. 50-66 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Adaptive and nonlinear control of discharge pressure for variable displacement axial piston pumps

    Koivumäki, J. & Mattila, J., 1 Oct 2017, In : Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME. 139, 10, 101008.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Additive Manufacturing in Production: A Study Case Applying Technical Requirements: 15th Nordic Laser Materials Processing Conference, Nolamp 15

    Ituarte, I. F., Coatanea, E., Salmi, M., Tuomi, J. & Partanen, J., 2015, In : Physics Procedia. 78, p. 357-366 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Adiabatic Heating of Austenitic Stainless Steels at Different Strain Rates

    Vazquez-Fernandez, N. I., Soares, G. C., Smith, J. L., Seidt, J. D., Isakov, M., Gilat, A., Kuokkala, V. T. & Hokka, M., 20 Jun 2019, In : Journal of Dynamic Behavior of Materials. 5, 3, p. 221-229 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Advances in the TUT microfactory concept development

    Heikkilä, R., Järvenpää, E. & Tuokko, R., 2010, In : International Journal of Automation Technology. 4, 2, p. 117-126

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Advantage of redundancy in the controllability of remote handling manipulator

    Muhammad, A., Mattila, J., Vilenius, M., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 1882-1885

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    A Holistic View on Design and Development of Manufacturing Systems

    Nylund, H. & Andersson, P. H., 2012, In : Procedia CIRP. 3, p. 388-393

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    A hydraulic cylinder model for multibody simulations

    Ylinen, A., Marjamäki, H. & Mäkinen, J., 2014, In : Computers & Structures. 138, p. 62-72 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    A measurement-integrated solution for particle image velocimetry and volume fraction measurements in a fluidized bed

    Kolehmainen, J., Elfvengren, J. & Saarenrinne, P., 2013, In : International Journal of Multiphase Flow. 56, p. 72-80 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    An agent-based system for orchestration support of web service-enabled devices in discrete manufacturing systems

    Villasenor Herrera, V., Vidales Ramos, A. & Martinez Lastra, J., 2012, In : Journal of Intelligent Manufacturing. 23, 6, p. 2681-2702

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Analysis of common rail pressure signal of dual-fuel large industrial engine for identification of injection duration of pilot diesel injectors

    Krogerus, T., Hyvönen, M. & Huhtala, K., Mar 2018, In : Fuel. 216, p. 1-9

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    Analysis of the new architecture proposal for the CMM control system

    Heikkilä, L., Saarinen, H., Aha, L., Viinikainen, M., Mattila, J., Hahto, A., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2071-2074

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    Analysis of the stress raising action of flaws in laser clad deposits

    Alam, M. M., Kaplan, A. F. H., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkala, J., Peltola, T. & Barsoum, Z., 2013, In : Materials and Design. 46, April, p. 328-337 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    Analytical solution for a class of flat plate conjugate convective heat transfer problems

    Lehtinen, A. & Karvinen, R., 2011, In : Frontiers in Heat and Mass Transfer. 2, p. 1-6 6 p., 043004.

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    An approach to investigating subsurface fatigue in a rolling/sliding contact

    Savolainen, M. & Lehtovaara, A., 2018, In : International Journal of Fatigue. 117, p. 180-188

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    A New Hybrid Approach for Augmented Reality Maintenance in Scientific Facilities

    Martinez, H., Laukkanen, S. & Mattila, J., 2013, In : international Journal of Advanced Robotic Systems. 10, p. 1-10 10 p., 321.

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    A new method to optimize natural convection heat sinks

    Lampio, K. & Karvinen, R., Aug 2018, In : Heat and Mass Transfer/Waerme- und Stoffuebertragung. 54, 8, p. 2571-2580

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    An Exceptional Generalization of the Poisson Distribution

    Hagmark, P-E., 2012, In : Open Journal of Statistics. 2, p. 313-318

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    An executable capability concept in formal resource descriptions

    Siltala, N., Järvenpää, E. & Lanz, M., Sep 2018, In : IFAC-PapersOnLine. 51, 11, p. 102-107 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    An experimental investigation of scuffing initiation due to axial displacement in a rolling/sliding contact

    Savolainen, M. & Lehtovaara, A., Mar 2018, In : Tribology International. 119, p. 688-697

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    An implementation of a semantic, web-based virtual machine laboratory prototyping environment

    Salonen, J., Nykänen, O., Ranta, P., Nurmi, J., Helminen, M., Rokala, M., Palonen, T., Alarotu, V., Koskinen, K. & Pohjolainen, S., 2011, In : Lecture Notes in Computer Science. 7032, p. 221-236

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    An integrated approach to mixed-model assembly line balancing and sequencing

    Uddin, M. K., Cavia Soto, M. & Martinez Lastra, J. L., 2010, In : Assembly Automation. 30, 2, p. 164-172

    Research output: Contribution to journalArticleScientificpeer-review

  43. Published

    Anisotropic viscodamage-viscoplastic consistency constitutive model with a parabolic cap for rocks with brittle and ductile behavior

    Saksala, T. & Ibrahimbegovic, A., 2014, In : International Journal of Rock Mechanics and Mining Sciences. 70, p. 460-473 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    An open modelling approach for availability and reliability of systems

    Penttinen, J-P., Niemi, A., Gutleber, J., Koskinen, K., Coatanea, E. & Laitinen, J., Mar 2019, In : Reliability Engineering and System Safety. 183, p. 387-399 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Published

    A novel method of vibration modes selection for improving accuracy of frequency-based damage detection

    Pan, J., Zhang, Z., Wu, J., Ramakrishnan, K. & Singh, H. K., 15 Feb 2019, In : Composites Part B : Engineering. 159, p. 437-446 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    A numerical model for the calculation of fretting fatique crack initiation for a smooth line contact

    Lehtovaara, A., Lönnqvist, C. & Mäntylä, A., 2010, In : Tribologia - Finnish Journal of Tribology. 29, 1, p. 7-16

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    A packet scheduler for real-time 6LoWPAN wireless networks in manufacturing systems

    Santillan Martinez, G., Delamer, I. M. & Martinez Lastra, J. L., 2014, In : Journal of Intelligent Manufacturing. 10845, 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    A performance evaluation concept for production systems in an SME network

    Mahmood, K., Lanz, M., Toivonen, V. & Otto, T., 27 Jun 2018, In : Procedia CIRP. 72, p. 603-608 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    A Petri net-based approach to incremental modelling of flow and resources in service-oriented manufacturing systems

    Popescu, C., Cavia Soto, M. & Martinez Lastra, J. L., 2012, In : International Journal of Production Research. 50, 2, p. 325-343

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    Application of a Capability-based Adaptation Methodology to a Small-size Production System

    Järvenpää, E., Lanz, M. & Tuokko, R., 2016, In : International Journal of Manufacturing Technology and Management. 30, 1/2, p. 67-86 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  51. Published

    A Semantic web services-based approach for production systems control

    Puttonen, J., Lobov, A., Cavia Soto, M. A. & Martinez Lastra, J. L., 2010, In : Advanced Engineering Informatics. 24, 3, p. 285-299

    Research output: Contribution to journalArticleScientificpeer-review

  52. Published

    A Survey of Analysis, Modeling, and Diagnostics of Diesel Fuel Injection Systems

    Krogerus, T. R., Hyvönen, M. P. & Huhtala, K. J., 2016, In : Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 138, 8, p. 1 11 p., 081501.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.