Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Conference contribution › Scientific › Peer-reviewed
  2. Published

    ISO 11783 compliant forest crane as a platform for automatic control

    Kalmari, J., Pihlajamäki, T., Hyyti, H., Luomaranta, M. & Visala, A., 2013, The 4th IFAC Conference on Modelling and Control in Agriculture, Horticulture and Post Harvest Industry, 28-30 August, 2013, Espoo, Finland. p. 164-169 6 p. (Elsevier IFAC Publications / IFAC Proceedings series).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Issue of using students as test users - some findings in VE testing

    Tiainen, T. & Ellman, A., 2014, Proceedings of the DESIGN 2014 13th International design conference, May 19-22, 2014, Dubrovnik - Croatia. Majanovic, D., Storga, M., Pavkovic, N. & Bojcetic, N. (eds.). Croatia: Facalty of Mechanical Engineering and Naval Architecture, University of Zagreb; The Design Society, Glasgow, p. 615-622 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Jet pump performance in liquid and gas pumping

    Mikkonen, A. & Karvinen, R., 2014, MFIP13, 13th International conference on multiphase flow in industrial plants, Mediterrean Foundation, Sestri Levante (Genova), Italy, 17-19 September 2014. Genova: Italian association of industrial plant enginnering; University of Genova Polytechnic school; Iltalian association of chemical engineering, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Key performance indicators for energy efficient asset management in a factory automation testbed

    Zhang, B., Postelnicu, C. & Martinez Lastra, J. L., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 391-396 (International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Knowledge-based artificial neural network (KB-ANN) in engineering: Associating functional architecture modeling, dimensional analysis and causal graphs to produce optimized topologies for KB-ANNs

    Coatanéa, E., Wu, D., Tsarkov, V., Gary Wang, G., Modi, S. & Jafarian, H., 2018, 38th Computers and Information in Engineering Conference. The American Society of Mechanical Engineers ASME, Vol. 1B-2018. 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Knowledge-based optimization of artificial neural network topology for process modeling of fused deposition modeling

    Nagarajan, H., Jafarian, H., Hamedi, A., Mokhtarian, H., Prod'hon, R., Tilouche, S., Coatanea, E. & Nenchev, V., 2018, Proceedings of the ASME 2018 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2018): Volume 4: 23rd Design for Manufacturing and the Life Cycle Conference; 12th International Conference on Micro- and Nanosystems. Aug. 26-29, 2018, Quebec City, Canada.. ASME International, Vol. 4. 12 p. DETC2018-86187

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Knowledge-based web service integration for industrial automation

    Ramis Ferrer, F. D. B., Gonzalez Moctezuma, L. E., Iarovyi, S., Lobov, A., Martinez Lastra, J. L., Vyatkin, V. & Dai, W., 2014, Proceedings 2014 12th IEEE International Conference on Industrial Informatics (INDIN), Porto Alegre, RS, Brazil, 27-30 July, 2014. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 733 - 739 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Laminated manifold for digital hydraulics - principles, challenges and benefits

    Paloniitty, M., Karvonen, M., Linjama, M. & Tiainen, T., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intellidgent Hydraulics and Automation, p. 27-42 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Lateral indentation and impact analyses on curved composite shells

    Di Vito, D., Pärnänen, T., Jokinen, J., Orell, O. & Kanerva, M., 2018, Proceedings of the 7th International Conference on Fracture Fatigue and Wear: FFW 2018, 9-10 July 2018, Ghent University, Belgium. Wahab, M. A. (ed.). Springer Singapore, p. 171-183 13 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Leadership instead of grading - The new goals of assessment

    Lehtonen, T., Juuti, T., Vanhatalo, M., Kopra, M. J. & Rättyä, K., 2016, 44th Annual Conference of the European Society for Engineering Education - Engineering Education on Top of the World: Industry-University Cooperation, SEFI 2016. European Society for Engineering Education SEFI, 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Lean manufacturing methods in simulation literature: Review and association analysis

    Tokola, H., Niemi, E. & Väistö, V., 16 Feb 2016, 2015 Winter Simulation Conference (WSC). p. 2239-2248 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Learning experience of a simple theory through different learning styles

    Saarenrinne, P., 2012, EDULEARN12 Proceedings, 4th International Conference on Education and New Learning Technologies, 2-4 July, 2012, Barcelona, Spain. Gomez Chova, L., Candel Torres, I. & Lopez Martinez, A. (eds.). International Association of Technology, Education andDevelopment IATED, p. 7653-7656 (International Conference on Education and New Learning Technologies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Learning experiences involving digital twins

    David, J., Lobov, A. & Lanz, M., 2018, IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society : 21-23 Oct. 2018, D.C., DC, USA. IEEE, p. 3681-3686 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Learning from Demonstration for Hydraulic Manipulators

    Suomalainen, M., Koivumäki, J., Lampinen, S., Kyrki, V. & Mattila, J., 1 Oct 2018, 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). IEEE, p. 3579-3586 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Learning logs in product development education

    Juuti, T., Rättyä, K. & Lehtonen, T., 2016, Proceedings of the 18th International Conference on Engineering and Product Design Education: Design Education: Collaboration and Cross-Disciplinarity, E and PDE 2016. Institution of Engineering Designers, The Design Society, p. 296-301 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Leveraging digital twins for assisted learning of flexible manufacturing systems

    David, J., Lobov, A. & Lanz, M., 2018, 2018 IEEE 16th International Conference on Industrial Informatics (INDIN): Porto, Portugal, July 18-20, 2018. IEEE

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Local compression behaviour of pre-fatigued and chemically pre-treated wood at high strain rate and high temperature

    Moilanen, C., Engberg, B. A. K., Björkqvist, T., Salminen, L. & Saarenrinne, P., 2014, International Mechanical Pulping Conference, IMPC 2014, 2-5 June 2014, Helsinki, Finland, PULPAPER 2014, 3-5 June, 2014, Helsinki, Finland. AEL, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Low level control system architecture for autonomous wheel loader

    Ahopelto, M., Uusisalo, J. & Huhtala, K., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 365-376 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Maintaining a dynamic view of semantic web services representing factory automation systems

    Puttonen, J., Lobov, A. & Martinez Lastra, J. L., 2013, IEEE 20th International Conference on Web Services June 27-July 2, 2013, Santa Clara Marriott, CA, USA. O´Connor, L. (ed.). Los Alamitos, CA: Institute of Electrical and Electronics Engineers, p. 419-426 8 p. (IEEE international conference on web services).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Major achievements and future visions in the Finnish micro and desktop factory research

    Tuokko, R. & Nurmi, A., 2011, Proceedings of the 8th International Conference on Multi-Material Micro Manufacture, 4M 2011, 8-10 November, 2011, Suttgart, Germany. Kück, H., Reinecke, H. & Dimov, S. (eds.). Singapore: Research Publishing, p. 16-26 (International Conference on Multi-Material Micro Manufacture).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Manufacturing sustainability: a comparison of Indian and Finnish manufacturers' vision and current state

    Shankar, K., Koho, M., Wan, H., Torvinen, S. & Chen, F. F., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Production Engineering, p. 491-498 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Matrix-based conflict resolution algorithm: applicaton to path selection in PN-based scheduling search

    Popescu, C. & Martinez Lastra, J. L., 2010, 15th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2010, September 13-16, 2010, Bilbao, Spain. p. 4 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    MDM for assessing product variety and production concepts

    Pulkkinen, A., Kuusela, J., Huhtala, P. & Riitahuhta, A., 2012, Proceedings of the 9th International Symposium on Tools and Methods of Competitive Engineering, TMCE 2012, 7-11 May, 2012, Karlsruhe, Germany. Imre, H., Zoltan, R., Albert, A. & Mathias, B. (eds.). Delft, Netherlands: Delft University of Technology, p. 553-562 (International Symposium on Tools and Methods of Competitive Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Measured characteristics of an in-line pump with independently controlled pistons

    Tammisto, J., Huova, M., Heikkilä, M., Linjama, M. & Huhtala, K., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Mechanical subsystems integration and structural analysis for the autonomous underwater explorer

    Villa, J., Heininen, A., Zavari, S., Salomaa, T., Usenius, O., Laitinen, J., Aaltonen, J. & Koskinen, K. T., 2018, 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). IEEE, p. 1488-1493

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Mechatronic Architecture Development of UX-1

    Zavari, S., Usenius, O., Salomaa, T., Villa Escusol, J., Heininen, A., Aaltonen, J. & Koskinen, K., 2017, ICCAS 2017 Proceedings. Institute of Control, Robotics and Systems, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Mechatronic design of a four wheel steering mobile robot with fault-tolerant odometry feedback

    Oftadeh, R., Aref, M. M., Ghabcheloo, R. & Mattila, J., 2013, The 6th IFAC Symposium on Mechatronic Systems, IFAC MECH2013, April 10-12, 2013, Zhejiang University, Hangzhou, China. p. 663-669 7 p. (Elsevier IFAC Publications / IFAC Proceedings series).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Mechatronic design of digital hydraulic micro valve package

    Linjama, M., Paloniitty, M., Tiainen, L. & Huhtala, K., 2014, The Second International Conference on Dynamics and Vibroacoustics of Machines, September 15-17, 2014, Samara, Russia. p. 610-617 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    MEMS-based State Feedback Control of Multi-Body Hydraulic Manipulator

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), November 3-7, 2013, Tokyo, Japan. Institute of Electrical and Electronics Engineers IEEE, p. 4419-4425 7 p. (IEEE/RSJ International Conference on Intelligent Robots and Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Mems Sensor Module for Hydraulic Boom State Feeedback Control

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 393-404 (Scandinavian International Conference on Fluid Power SICFP).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Mems sensor network based anti-sway control system for articulated hydraulic crane

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2013, Proceedings of ASME/BATH 2013 Symposium on Fluid Power and Motion Control, FPMC2013, October 6-9, 2013, Sarasota, Florida. p. 1-9 9 p. (Symposium on Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Method for automatic testing of control systems

    Kolu, A., Mantere, P., Vallas, A., Hyvönen, M. & Multanen, P., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 111-127 17 p. (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Method for evaluating the value of technology in the manufacturing industry

    Mämmelä, J., Juuti, T., Julkunen, P., Lemmetty, P. & Pakkanen, J., 2020, The 13th World Congress on Engineering assets and public infrastructures in the age of digitalization, WCEAM: 24th-26th September 2018, Stavanger, Norway.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Method for Modelling Strategic Capabilities in Small and Medium Sized Enterprises

    Halme, J., Majuri, M., Nylund, H., Kopra, M-J. & Tuokko, R., 2015, Proceedings of the 25th international conference on flexible automation and intelligent manufacturing : FAIM2015, 23rd-26th June, 2015 Wolverhampton, UK. Vol. Vol. 2. p. 132-139 8 p. 130

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Methods to design optimum heat sink geometries

    Karvinen, R. & Lampio, K., 10 Aug 2018, International Heat Transfer Conference, IHTC-16, August 10-15, 2018, Beijing, China. p. 5041-5048 8 p. IHTC16-23247

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Method to determine internal leakage of aircraft's hydraulic servo

    Laitinen, J. & Koskinen, K., 2018, 12th World Congress on Engineering Asset Management & 13th International Conference on Vibration Engineering and Technology of Machinery: (WCEAM 2017) 2-4, August 2017, Brisbane, Australia.. Mathew, J., Lim, C. W., Ma, L., Sands, D., Cholette, M. E. & Borghesani, P. (eds.). Springer, p. 343-349 7 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Micro-electromechanical System Sensors in Unscented Kalman Filter-based Condition Monitoring of Hydraulic Systems

    Nurmi, J., Honkakorpi, J., Vihonen, J. & Mattila, J., 2013, 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, July 9-12, 2013, Wollongong, Australia, AIM 2013 Conference Digest, Mechatronics for Human Wellbeing. IEEE; ASME, p. 354-361 (IEEE/ASME International Conference on Advanced Intelligent Mechatronics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Miniaturization of flexible screwing cell

    Vuola, A., Heikkilä, R., Prusi, T., Remes, M., Rokka, P., Siltala, N. & Tuokko, R., 2010, Proceedings of 5th IFIP WG 5.5, International Precision Assembly Seminar, IPAS 2010, 14-17 February, 2010, Chamonix, France. Ratchev, S. (ed.). p. 309-316

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Miniaturized camera systems for microfactories

    Prusi, T., Rokka, P. & Tuokko, R., 2010, Proceedings of 5th IFIP WG 5.5, International Precision Assembly Seminar, IPAS 2010, 14-17 February, 2010, Chamonix, France. Ratchev, S. (ed.). p. 115-122

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Mobile robotic spatial odometry by low-cost IMUs: (Inertial Measurement Unit Sensors)

    Zhang, X., Mononen, T., M. Aref, M. & Mattila, J., 30 Aug 2018, 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications (MESA): Oulu, July 2-4, 2018.. Oulu: IEEE, 6 p. 8449209

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Model-based control of a pressure-compensated directional valve with significant dead-zone

    Lampinen, S., Koivumäki, J., Mattila, J. & Jouni, N., 7 Oct 2019, ASME/BATH 2019 Symposium on Fluid Power and Motion Control: October 7–9, 2019 Longboat Key, Florida, USA . ASME

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Model-based design of power-split drivelines

    Erkkilä, M., Huhtala, K., Vilenius, M. & Virvalo, T., 2009, Agricultural Engineering Conference 2009, 6.-7.11.2009, Hannover, Germany. VDI-Berichte. p. 327-332

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Model-based development in the domain of mobile machines

    Jouppila, V., Kaapu, T., Sjöstedt, C-J., Ellman, A. & Chen, D-J., 2014, Digital proceedings of the tenth International Symposium on Tools and Methods of Competitive Engineering - TMCE 2014, May 19-23, Budapest, Hungary. Horvath, I. & Rusak, Z. (eds.). Delft: Delft University of Technology, p. 759-772 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Model-based pressure control with digital valve system

    Linjama, M. & Lahtinen, J., 2011, The Fourth Workshop on Digital Fluid Power, 21st-22nd November, 2011, Linz, Austria. Linz: DFP-Workshops, p. 26-38 (Workshop on Digital Fluid Power; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Modeling coupled hydraulic-driven multibody systems using finite element method

    Mäkinen, J. M. A., Pertola, P. S. & Marjamäki, H. U., 2010, The 1st Joint International Conference on Multibody System Dynamics, May 25-27, 2010, Lappeenranta, Finland. p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Modeling of Age-Dependent Failure Tendency from Incomplete Data

    Hagmark, P. & Laitinen, J., 2014, Engineering Asset Management 2011: Proceedings of the Sixth World Congress on Engineering Asset Management. Lee, J., Ni, J., Sarangapani, J. & Mathew, J. (eds.). London: Springer-Verlag London Limited, p. 449-459 11 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Modeling of deformations and stresses during glass tempering

    Aronen, A. & Karvinen, R., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA. New York, NY: ASME, p. 1-9 9 p. (ASME International Mechanical Engineering Congress and Exposition IMECE2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Modeling of Fine Particles and Alkali Metal Compounds in Kraft Recovery Boiler Furnace

    Leppänen, A., Välimäki, E. & Oksanen, A., 2011, The 2011 TAPPI PEERS Conference, 2-5 October 2011, Oregon Convention Center in Portland, Oregon USA. Norcross, GA: TAPPI, p. 1-8 8 p. (TAPPI PEERS Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Modeling of Tangential Vibrations in Cylindrical Grinding Contact with Regenerative Chatter

    Järvenpää, V-M., Yuan, L., Kalbasi Shirvani, H. & Mehmood, F., 2013, Surveillance 7 - International conference, Institute of Technology of Chartres, France, October 29-30, 2013. 10 p. (International Conference Surveillance).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    Modeling of temperature fields and residual stresses in an electron beam welded copper plate

    Leikko, J., Karvinen, R., Taskinen, P. & Salonen, T., 2011, Proceedings of 6th Baltic Heat Transfer Conference - BHTC2011, August 24-26 2011, Tampere Finland. Karvinen, R. & Lindstedt, M. (eds.). Tampere: Tampere University of Technology, p. 1-12 12 p. (Baltic Heat Transfer Conference BHTC).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1...7 8 9 10 11 12 13 14 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.