Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Conference contribution › Scientific › Peer-reviewed
  2. Published

    Data aggregation at field device level for industrial ambient monitoring using web services

    Nieto Lee, A. & Martinez Lastra, J. L., 2011, IEEE 9th International Conference on Industrial Informatics, INDIN 2011, 26-29 July, 2011, Caparica, Lisbon, Portugal. Piscataway, NJ: IEEE, p. 491-496 (International Conference on Industrial Informatics INDIN).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Decision making by using tree-like structures on industrial controllers

    Gonzalez Moctezuma, L. E., Lobov, A. & Martinez Lastra, J. L., 2012, Proceedings of 10th International Conference on ICT and Knowledge Engineering, 21-23 November, 2012, Siam University, Bangkok, Thailand. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 77-83 (International Conference on ICT and Knowledge Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Decision support tool for retrofitting a district towards district as a service

    Florea, A., Postelnicu, C., Martinez Lastra, J. L., Larranaga, M., Marquez Contreras, J. A., Presser, M., Plambech, T., Colino, A. & Bayona Pons, V. M., 2013, Conference booklet, IECON 2013, 39th Annual Conference of the IEEE Industrial Electronics Society in conjunction with IWIES 2013: 1st International workshop on intelligent energy systems, Austria Center, Vienna, Austria, 10-14 November 2013. Piscataway, NJ: Institute of Electrical and Electronics Engineers, IEEE, p. 70-75 6 p. (Annual Conference of the IEEE Industrial Electronics Society).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Deep Learning of Robotic Manipulator Structures by Convolutional Neural Network

    Aref, M. M. & Mattila, J., Nov 2018, 2018 Ninth International Conference on Intelligent Control and Information Processing (ICICIP). IEEE, p. 236-242 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Delay excited vibrations in grinding wheel rotor system

    Järvenpää, V-M. & Yuan, L., 2014, Proceedings of the 21st International Congress on Sound and Vibration, In Depth Sound and Vibration Research 2014, ICSV21, 13-17 July, 2014, Beijing, China. Crocker, M. J., Pawelczyk, M. & Tian, J. (eds.). International Institute of Acoustics and Vibration (IIAV), p. 2437-2444 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Design driven world of cellulose-from bulk to luxury?

    Qvintus, P., Kataja, K., Heikkilä, P., Salmela, J., Lehmonen, J., Ketoja, J., Hänninen, T., Harlin, A., Härkäsalmi, T., Vuorinen, J. & Vuorinen, T., 2014, Fibre Value Chain Conference and Expo 2014: Pulp and Paper Bioenergy Bioproducts. Appita Inc., p. 67-74 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Design for human - virtual engineering is a media for knowledge transfer

    Leino, S-P. & Pulkkinen, A., 2012, The 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Dorian, M., Mario, S., Neven, P. & Nenad, B. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, p. 1507-1514 (International Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Designing manufacturing dashboards on the basis of a Key Performance Indicator survey

    Tokola, H., Järvenpää, E., Gröger, C. & Niemi, E., 2016, 49th CIRP Conference on Manufacturing Systems (CIRP-CMS 2016) . Elsevier, (Procedia CIRP).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Design management in product development organisation - the elaboration of comprehensive design management model

    Juuti, T. & Lehtonen, T., 2010, NordDesign 2010 Conference, 25-27 August, 2010, Göteborg, Sweden. Dagman, A. & Söderberg, R. (eds.). p. 65-74

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Design of a portable motion platform using pneumatic muscle actuators

    Jouppila, V., Itäsalo, A-V., Kuosa, J. & Ellman, A., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 1-15 15 p. (Scandinavian International Conference on Fluid Power SICFP).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Design-optimization of cylindrical, layered composite structures using efficient laminate parameterization

    Mönicke, A., Katajisto, H., Leroy, M., Petermann, N., Kere, P. & Perillo, M., 2012, 12th European Conference on Spacecraft Structures, Materials and Environmental Testing, Noordwijk, the Netherlands, 20-23 March, 2012. ESA SP. European Space Agency, p. 1-6 6 p. (ESA - SP; vol. 691).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Design reasoning patterns in NPD education design

    Juuti, T., Lehtonen, T., Rättyä, K., Halonen, N., Vanhatalo, M. & Kujansuu, P., 2014, Proceedings of 16th International Conference on Engineering and Product Design Education, University of Twente, Enschede, The Netherlands 4th-5th September 2014. Bohemia, E., Eger, A., Eggink, W., Kovacevic, A., Parkinson, B. & Wits, W. (eds.). The Design Society, p. 682-687 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Detecting and eliminating the measurement error caused by free air in aircraft hydraulic system on-line particle counting

    Aaltonen, J. & Koskinen, K. T., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 229-240 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Detection and isolation of faults in mobile hydraulic valves based on a reduced-order model and adaptive thresholds

    Nurmi, J. & Mattila, J., 2013, Proceedings of ASME/BATH 2013 Symposium on Fluid Power and Motion Control, FPMC2013, October 6-9, 2013, Sarasota, Florida. Sarasota, Florida, USA: ASME, p. 1-10 10 p. (Symposium on Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Detection and isolation of leakage and valve faults in hydraulic systems in varying loading conditions

    Nurmi, J., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 80-88 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Detection of abnormal energy patterns pointing to gradual conveyor misalignment in a factory automation testbed

    Khajehzadeh, N., Postelnicu, C. & Martinez Lastra, J. L., 2012, Proceedings of 2012 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2012, 14-17 October, 2012, COEX, Seoul, Korea. Piscataway, NJ: IEEE, p. 1225-1229 (International Conference on Systems, Man, and Cybernetics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Developed measuring methods for hydraulic fluid dynamics and viscosity at extreme pressures and temperatures

    Karjalainen, J-P., Karjalainen, R. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Developing VIP2M: A Virtual Environment for Prototyping Mobile Work Machines

    Kuusisto, J., Kaapu, T., Ellman, A. & Tiainen, T., 2012, Proceedings of the 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Marjanovic, D., Storga, M., Pavkovic, N. & Bojcetic, N. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, The Design Society, Glasgow, p. 657-666 (International Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Development and numerical implementation of an anisotropic continuum damage model for concrete

    Hartikainen, J., Kolari, K. & Kouhia, R., 2016, Advances in Fracture and Damage Mechanics XV. Trans Tech Publications Ltd, p. 115-118 4 p. (Key Engineering Materials; vol. 713).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Development of a rule-base for matching product requirements against resource capabilities in an adaptive production system

    Järvenpää, E., Luostarinen, P., Lanz, M. & Tuokko, R., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing , FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Production Engineering, p. 449-456 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Development of a test rig for reciprocating seals in heavy load conditions

    Juoksukangas, J., Lehtovaara, A., Miettinen, J., Tolvanen, P., Järvelä, P. & Niemi, A-M., 2010, 14th Nordic Symposium on Tribology, Nordtrib 2010, Storforsen, Sweden, Luleå University of Technology. p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Development of process for adaptive lifetime estimation of mechanical assemblies using accelerated testing methods

    Hietala, J-P., Ojala, P., Multanen, P., Miettinen, J. & Saarenrinne, P., 26 Oct 2016, Risk, Reliability and Safety: Innovating Theory and Practice : Proceedings of the 26th European Safety and Reliability Conference, ESREL 2016, Glasgow, Scotland, 25-29 September 2016. Walls, L., Revie, M. & Bedford, T. (eds.). CRC Press; Taylor & Francis, 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Development of water hydraulic manipulator for the remote handling of heavy duty components

    Muhammad, A., Valkama, P., Siuko, M., Mattila, J. & Vilenius, M., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Development process of control system

    Ahopelto, M., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-7 7 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    DFMA Implementation in high variability product context

    Lahtinen, T., Berkovits, J. & Riitahuhta, A., 2012, Proceedings of the 9th International Symposium on Tools and Methods of Competitive Engineering, TMCE 2012, 7-11 May, 2012, Karlsruhe, Germany. Imre, H., Zoltan, R., Albert, A. & Mathias, B. (eds.). Delft, Netherlands: Delft University of Technology, p. 915-926 (International Symposium on Tools and Methods of Competitive Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Diagnosis of multi-descriptor condition monitoring data

    Lumme, V., 2011, 2011 IEEE Conference on Prognostics and Health Management PHM, 20.-23.6.2011, Denver, CO, USA. Piscataway, NJ: IEEE, p. 1-10 10 p. 6024327. (IEEE Conference on Prognostics and Health Management PHM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Digital flow control unit for controlling amount of water used for binding dust

    Laamanen, A., Anttonen, P. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 119-128

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Digital fluid power - state of the art

    Linjama, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 331-354 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Digital Hydraulic Cylinder Drive For Folding Cargo Hatches

    Westerlund, S. & Mäkinen, E., 2012, Proceedings of the 7th FPNI PhD Symposium on Fluid Power, University of Modena and Reggio Emilia, June 27-30, 2012, Reggio Emilia, Italy. Milani, M., Montorsi, L. & Paltrinieri, F. (eds.). Fluid Power Net International, p. 235-248 (Fluid Power Net International PhD Symposium; vol. 7).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Digital Hydraulic Power Management System - Measured Characteristics of a Second Prototype

    Heikkilä, M., Tammisto, J., Linjama, M. & Huhtala, K., May 2016, Proceedings of the Eighth Workshop on Digital Fluid Power (DFP16) . Uusi-Heikkilä, J. & Linjama, M. (eds.). p. 69-81 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Digital hydraulic power management system - towards lossless hydraulics

    Linjama, M. & Huhtala, K., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 5-22

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Digital Hydraulic Pressure Relief Function

    Ketonen, M., Huova, M., Heikkilä, M., Linjama, M., Boström, P. & Walden, M., 2012, Fluid Power and Motion Control, FPMC 2012, University of Bath, UK. Johnston, D. N. & Plummer, A. R. (eds.). Bath, United Kingdom: Centre for Power Transmission and Motion Control, University of Bath, ASME, p. 137-150 (Bath/ASME Symposium on Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Digital hydraulics in workboat propulsion control

    Perukangas, M. & Mäkinen, E., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 153-166

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Digital image correlation study of the deformation and functioning of the human heart during open-heart surgery

    Soltani, A., Curtze, S., Lahti, J., Järvelä, K., Laurikka, J., Hokka, M. & Kuokkala, V. T., 2018, Mechanics of Biological Systems, Materials and other topics in Experimental and Applied Mechanics - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Springer New York LLC, Vol. 4. p. 19-27 9 p. (Conference Proceedings of the Society for Experimental Mechanics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Digital manufacturing supporting integrated improvement of products and production systems

    Nylund, H. & Andersson, P. H., 2010, Proceedings of 17th CIRP International Conference on Life Cycle Engineering, LCE 2010, 19-21 May, 2010, Hefei, China. China: Hefei University of Technology, p. 156-161

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Dimensional analysis conceptual modeling supporting adaptable reasoning in simulation-based training

    Coatanea, E. & Roca, R., 7 Aug 2018, 2018 13th System of Systems Engineering Conference, SoSE 2018. IEEE, p. 245-252 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Dimension reduction and decomposition using causal graph and qualitative analysis for aircraft concept design optimization

    Wu, D., Coatanea, E. & Wang, G. G., 2017, 43rd Design Automation Conference. The American Society of Mechanical Engineers ASME

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Direct connection of digital hydraulic power management system and double acting cylinder - a simulation study

    Heikkilä, M. & Linjama, M., 2011, The Fourth Workshop on Digital Fluid Power, 21st-22nd November, 2011, Linz, Austria. Linz: DFP-Workshops, p. 59-74 (Workshop on Digital Fluid Power; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Discovering material recovery scenarios for industrial machinery: A case-based approach

    Bernstein, W. Z., Ramanujan, D., Koho, M., Zhao, F. & Ramani, K., 2012, ASME 2012 International Manufacturing Science and Engineering Conference (MSEC) collocated with the 40th North American Manufacturing Research Conference and in participation with the International Conference on Tribology Materials and Processing, Notre Dame, IN, USA, 4-8 June, 2012. ASME, p. 1097-1104 8 p. (ASME International Manufacturing Science and Engineering Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Displacement controlled hydraulic systems

    Ahola, V., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). Espoo, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Displacement controlled machines

    Ahola, V., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 124-131 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Driving feel generation of the mobile machine simulator with the water hydraulic 6-DOF motion platform

    Rokala, M., Sairiala, H. & Koskinen, K. T., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    DSM made easy

    Halonen, N., Juuti, T. & Luostarinen, P., 2012, The 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Dorian, M., Mario, S., Neven, P. & Nenad, B. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, p. 1445-1454 (International Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Durability study on high speed water hydraulic miniature on/off-valve

    Paloniitty, M., 24 May 2016, DFP16, Proceedings of the eighth workshop on digital fluid power, May 24-25, 2016, Tampere, Finland. Tampere, p. 201-211 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Dynamic Fracture and Fragmentation of Heat Shocked Granites

    Hokka, M., Mardoukhi, A. & Kuokkala, V-T., 2017, 14th International conference of Fracture: Proceedings of ICF 14. Rhodes, Greece

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Dynamic Modeling and Simulation of a Cylindrical Grinder in Presence of Non-linear Friction Effect

    Kalbasi Shirvani, H., Järvenpää, V-M. & Yuan, L., 2013, Proceedings in Research Conference in Technical Disciplines, RCITD 2013, 18.-22. November 2013, Slovak Republic. Mokrys, M., Badura, S. & Lieskovsky, A. (eds.). Zilina: EDIS, p. 47-52 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Dynamic operation environment - towards intelligent adaptive production systems

    Järvenpää, E., Luostarinen, P., Lanz, M., Garcia, F. & Tuokko, R., 2011, IEEE International Symposium on Assembly and Manufacturing, ISAM 2011, 25-27 May, 2011, Tampere Hall, Tampere, Finland. Piscataway, NJ: IEEE, p. 1-6 6 p. (IEEE International Symposium on Assembly and Manufacturing ISAM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Dynamic simulation of dependability of nickel reduction plant

    Penttilä, J. & Ikonen, V., 2013, Proceedings fo the ASEM 2013 International Mechanical Engineering Congress and Exposition, IMECE 2013, November 15-21, 2013, San Diego, California, USA. ASME, p. 1-7 7 p. 64308. (ASME International Mechanical Engineerig Congress and Exposition).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Dynamics of ice milling and breaking during arctic ship steering operations

    Keskinen, E., Montonen, J., Sharma, N. & Cotsaftis, M., 2014, Proceedings of the ASME 2014, 12th Biennial Conference on Engineering Systems Design and Analysis, ESDA2014, June 25-27, 2014, Copenhagen, Denmark. The American Society of Mechanical Engineers ASME, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    Dynamics of single-hit pneumatic test drill for pulse-shaping analysis of impacting waves

    Montonen, J., Keskinen, E., Cotsaftis, M., Miettinen, J. & Seemann, W., 2013, Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition, IMECE2013, November 15-21, 2013, San Diego, California, USA. ASME, p. 1-7 7 p. 64835. (ASME International Mechanical Engineerig Congress and Exposition).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Download list To download, please limit the number of search results to 1,000 or less.