Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Conference contribution › Scientific › Peer-reviewed
  2. Published

    Planning of Dependable Remote Handling Control System Architecture for ITER

    Alho, P., Hahto, A., Mattila, J. & Aha, L., 2011, European Nuclear Young Generation Forum, ENYGF 2011, 17.5.-22.5.2011, Praha. Prague: ENYGF, p. 1-7 7 p. (European Nuclear Young Generation Forum ENYGF).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Plant-wide optimization of a copper smelter: How to do it in practice?

    Korpi, M., Jansson, J., Pihlasalo, J., Suominen, O. & Vilkko, M., 2019, Proceedings of the 10th European Metallurgical Conference, EMC 2019. GDMB Verlag GmbH, Vol. 1. p. 95-106 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Plastic deformation of powder metallurgy tungsten alloy foils for satellite enclosures

    Kanerva, M., Sarlin, E., Hållbro, A. & Jokinen, J., Sep 2016, 30th Congress of the International Council of the Aeronautical Sciences ICAS (Proceedings). Daejeon, South Korea

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Power management in a mobile work machine: reduced diesel rpm for better energy efficiency

    Ahopelto, M., Backas, J. & Huhtala, K., 2012, Proceedings of the 7th FPNI PhD Symposium on Fluid Power, University of Modena and Reggio Emilia, June 27-30, 2012, Reggio Emilia, Italy. Milani, M., Montorsi, L. & Paltrinieri, F. (eds.). p. 133-148 (Fluid Power Net International PhD Symposium; vol. 7).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Power Management of Mobile Machines with Multiple Consumers

    Ahopelto, M., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 31-37 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Predicting operator's cognitive and motion skills from joystick inputs

    Laurikkala, M., Suzuki, S. & Vilkko, M., 22 Dec 2016, IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society. IEEE, p. 5935-5940 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Prediction of drive torque in hydraulic wheel loader

    Ahopelto, M. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Prediction of long-term mechanical behavior of glassy polymers

    Holopainen, S. & Wallin, M., 2010, Proceedings of the 23rd Nordic Seminar on Computational Mechanics Stockholm, 21-22 October, 2010. Eriksson, A. & Tibert, G. (eds.). 752: KTH, p. 134-137 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Prediction of transverse vibrations of thin-wall rolls under grinding process using Timoshenko beam theory

    Dospel, V. & Keskinen, E., 2010, Postgraduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, Cern, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 14-26

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Prerequisites and conditions for socially sustainable manufacturing in Europe’s future factories—results overview from the SO SMART project

    Berlin, C., Barletta, I., Fantini, P., Georgoulias, K., Hansich, C., Lanz, M., Latokartano, J., Pinzone, M., Schönborn, G., Stahre, J., Taisch, M. & Tuokko, R., 2016, Advances in Ergonomics of Manufacturing: Managing the Enterprise of the Future - Proceedings of the AHFE International Conference on Human Aspects of Advanced Manufacturing, 2016. Springer Verlag, Vol. 490. p. 319-330 12 p. (Advances in Intelligent Systems and Computing; vol. 490).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Presenting capabilities of resources and resource combinations to support production system adaptation

    Järvenpää, E., Luostarinen, P., Lanz, M. & Tuokko, R., 2011, IEEE International Symposium on Assembly and Manufacturing, ISAM 2011, 25-27 May, 2011, Tampere Hall, Tampere, Finland. Piscataway, NJ: IEEE, p. 1-6 6 p. (IEEE International Symposium on Assembly and Manufacturing ISAM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Pro-active content managing system for efficient human machine interaction in data intensive environments

    Nieto Lee, A. N., Evchina, Y., Dvoryanchikova, A. & Martinez Lastra, J. L., 2013, Proceedings 2013 11th IEEE international conference on industrial informatics INDIN, Bochum, Germany, July 29-31, 2013. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 790-796 6 p. (IEEE international conference on industrial informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Probabilistic Modelling of Defects in Additive Manufacturing: A Case Study in Powder Bed Fusion Technology

    Mokhtarian, H., Hamedi, A., Nagarajan, H., Panicker, S., Coatanea, E. & Haapala, K., 31 Dec 2018, 52nd CIRP Conference on Manufacturing Systems. Elsevier, p. 956-961 (Procedia CIRP; vol. 81).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Process for Evaluation and Validation of Non-Original Components for Aircraft Hydraulic Systems

    Aaltonen, J., Alarotu, V., Koskinen, K. T. & Siitonen, M., 2013, Proceedings of the 4th CEAS Conference in Linköping, 2013. Melin, T., Krus, P., Vinterhav, E. & Övrebö, K. (eds.). Linköping: Linköping University Electronic Press, p. 693-699 7 p. (International Conference of the European Aerospace Societies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Process planning based on feature recognition method

    Garcia, F., Lanz, M., Järvenpää, E. & Tuokko, R., 2011, IEEE International Symposium on Assembly and Manufacturing, ISAM 2011, 25-27 May, 2011, Tampere Hall, Tampere, Finland. Piscataway, NJ: IEEE, p. 1-6 6 p. (IEEE International Symposium on Assembly and Manufacturing ISAM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Product development education - Conceptual modelling, knowledge integration and metacognition

    Juuti, T., Lehtonen, T. & Rättyä, K., 2012, 4th International Conference on Engineering and Product Design Education: Design Education for Future Wellbeing, EPDE 2012, 6-7 September, Antwerp; Belgium. p. 83-88 6 p. (International Conference on Engineering and Product Design Education).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Production as a key factor for driving competitiveness in manufacturing industry

    Majuri, M., Tapaninaho, M., Tuokko, R. & Torvinen, S., 2014, Proceedings of the 24th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM2014, 20th -23rd May, San Antonio, Texas, USA. Chen, F. F. (ed.). Lancaster, Pennsylvia: DEStech Publications, p. 209-214 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Production planning and control in Finnish manufacturing companies – Current state and challenges

    Järvenpää, E., Lanz, M., Tokola, H., Salonen, T. & Koho, M., 2015, Proceedings of the 25th International Conference on Flexible Automation and Intelligent Manufacturing. 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Product life cycle disposition model

    Halonen, N., Lehtonen, T., Pakkanen, J., Juuti, T., Ellman, A. & Riitahuhta, A., 2014, Proceedings of the DESIGN 2014 13th International Design Conference , May 19-22, 2014, Dubrovnik - Croatia. Majanovic, D., Storga, M., Pavkovic, N. & Bojcetic, N. (eds.). Croatia: The Design Society, p. 831-840 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Product strategies in merchant ship and airliner industries

    Lehtinen, J., Lehtonen, T., Pakkanen, J. & Riitahuhta, A., 2013, Proceedings of the 19th International Conference on Engineering Design, ICED 13, Design for Harmonies, Vol 3: Design Organisation and Management, 19th-22nd August 2013, Sungkyunkwan University, Seoul, Korea. Lindemann, U., Venkataraman, S., Kim, Y. S., Lee, S. W., de Weck, O. & Hong, Y. S. (eds.). Scotland: The Design Society, p. 201-210 10 p. (International Conference on Engineering Design).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Propulsion system development and power consumption in an autonomous underwater vehicle

    Zavari, S., Usenius, O., Villa, J., Heininen, A., Salomaa, T., Laitinen, J., Aaltonen, J. & Koskinen, K. T., 31 Oct 2019, 2019 23rd International Conference on System Theory, Control and Computing (ICSTCC). IEEE, p. 521-524 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    PTV and PIV based dispersed phase velocity measurements in a pseudo-2D turbulent fluidized bed

    Kolehmainen, J., Elfvengren, J., Ylönen, M., Saarenrinne, P., Kallio, S. & Peltola, J., 2014, Proceedings of the International Conference on Heat Transfer and Fluid Flow, (HTFF´14), Prague, Czech Republic, August 11-12, 2014. Avestia Publishing, International ASET, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Rakenteen vasteiden estimointi metamallien avulla

    Halonen, L. & Pajunen, S., 2012, Proceedings of the 11th Finnish Mechanics Days. XI Suomen Mekaniikkapäivät Oulun yliopisto 29.-30.11.2012. Koivurova, H. & Malaska, M. (eds.). Oulu: Oulun yliopisto, p. 77-82 (Finnish Mechanics Days. Suomen Mekaniikkapäivät).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    RAMS-model for Mobile Work Machines with small production series

    Ellman, A., Kunttu, S., Valkokari, P. & Saarinen, H., 2012, Proceedings of 11th International Probabilistic Safety Assessment and Management Conference & The Annual European Safety and Reliability Conference (PSAM11, ESREL 2012), Helsinki 25-29 June 2012. Red Hook, NY: Curran Associates, p. 4983-4988 (International Probabilistic Safety Assessment and Management Conference & The Annual European Safety and Reliability Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Real-time and Robust Collaborative Robot Motion Control with Microsoft Kinect ® v2

    Teke, B., Lanz, M., Kämäräinen, J-K. & Hietanen, A., 27 Aug 2018, 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018. IEEE, 6 p. 8449156

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Real-Time Service-Oriented Architectures: A Data-Centric Implementation for Distributed and Heterogeneous Robotic System

    Alho, P. & Mattila, J., 2013, Proceedings of the 4th IFIP TC 10 International Embedded Systems Symposium, IESS 2013, Paderborn, Germany, June 2013.. Schirner, G., Götz, M., Rettberg, A., Zanella, M. C. & Rammig, F. J. (eds.). Springer, p. 262-271 10 p. (IFIP Advances in Information and Communication Technology; vol. 403).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Real time surface tracking system in laser microprocessing

    Hautala, V., Määttänen, A. & Vihinen, J., 2012, Proceedings of the 31st International Congress on Applications of Lasers & Electro-optics, ICALEO 2012, 23-27 September, 2012, Anaheim, California, USA. Laser Institute of America, p. 983-990 M1102. (International Congress on Applications of Lasers & Electro-optics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Recent advancements in miniature valve development

    Karvonen, M., Ketonen, M., Linjama, M. & Puumala, V., 2011, The Fourth Workshop on Digital Fluid Power, 21st-22nd November, 2011, Linz, Austria. Linz: DFP-Workshops, p. 90-103 14 p. (Workshop on Digital Fluid Power; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Recent results in energy efficient digital hydraulic valve control

    Huova, M., 2012, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 89-94 (GIM Scientific Workshop; vol. 6).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Recognition of Operating States of a Medium-Sized Mobile Machine

    Krogerus, T., Hyvönen, M., Raivio, K. & Huhtala, K., 2013, Proceedings of the 13th Scandinavian International Conference on Fluid Power, 3-5 June, Linköping, Sweden. p. 1-10 10 p. (Scandinavian International Conference on Fluid Power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Recognition of Operating States of Mobile Machine

    Krogerus, T., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 70-80 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Redundancy-based visual tool center point pose estimation for long-reach manipulators

    Mäkinen, P., Mustalahti, P., Launis, S. & Mattila, J., 2020, 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2020. IEEE, p. 1387-1393 7 p. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Reliability management in conceptual design - experiences from two practical cases

    Valkokari, P., Ahonen, T., Jännes, J., Välisalo, T. & Ellman, A., 2012, Proceedings of 11the International Probabilistic Safety Assessment and Management Conference & The Annual European Safety and Reliability Conference (PSAM11, ESREL 2012), Helsinki 25-29 June 2012. Red Hook, NY: Curran Associates, p. 1085-1093 (International Probabilistic Safety Assessment and Management Conference & The Annual European Safety and Reliability Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Remote energy monitoring unit design and implementation

    Zhang, B., Popescu, C., Lobov, A. & Martinez Lastra, J. L., 2011, Proceedings of the 37th IEEE International Conference on Industrial Electronics, IECON 2011, 7-10 November, 2011, Melbourne, Australia. Piscataway, NJ: IEEE, p. 3125-3130 (IEEE International Conference on Industrial Electronics IECON).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Remote Handling Control System for Water Hydraulic Mover

    Tuominen, J. & Mattila, J., 2013, The 8th International Conference on Fluid Power Transmission and Control, ICFP 2013, April 9-11, 2013, Zhejiang University, Hangzhou, China. Yongxiang, L., Qingfeng, W., Bingfeng, J. & Jun, Z. (eds.). p. 387-391 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Remote support for maintenance tasks by the use of Augmented Reality: the ManuVAR project

    Azpiazu, J., Siltanen, S., Multanen, P., Mäkiranta, A., Barrena, N., Diez, A., Agirre, J. & Smith, T., 2011, Proceedings of the 9th Congress on Virtual Reality Applications, CARVI 2011. San Sebastian: Tecnalia, p. 1-6 6 p. (Congress on Virtual Reality Applications CARVI; vol. 9).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Requirements for Manufacturing Operations Management and Control Systems in a Dynamic Environment

    Järvenpää, E., Tokola, H., Salonen, T., Lanz, M., Koho, M. & Tuokko, R., 2014, Proceedings of the 24th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM2014, 20th -23rd May, San Antonio, Texas, USA. Chen, F. F. (ed.). Lancaster, Pennsylvia: DEStech Publications, p. 1135-1142 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Research of optimizing the prime mover and hydraulics of mobile machines

    Backas, J., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-5 5 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Research platforms for future activities

    Huhtala, K., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). p. 1-16 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Resilient Cooperative Voltage Control for Distribution Network with High Penetration Distributed Energy Resources

    Gusrialdi, A., Xu, Y., Qu, Z. & Simaan, M. A., 2020, European Control Conference 2020, ECC 2020. IEEE, p. 1533-1539 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Retrofitting a factory automation system to address market needs and societal changes

    Gonzalez Moctezuma, L. E., Jokinen, J., Postelnicu, C. & Martinez Lastra, J. L., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 413-418 (IEEE International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Retrofitting digital hydraulics – An analytical study

    Ketonen, M., Linjama, M. & Huhtala, K., 24 Mar 2014, Conference proceedings, 9th International Fluid Power Conference Aachen: Modern Fluid Power - Challenges, Responsibilities, Markets, Vol. 1. Aachen Germany, p. 163 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Retrospective study on teaching engineering design and product development

    Lehtonen, T., Juuti, T., Rättyä, K. & Vanhatalo, M., 2013, E&PDE 2013, the 15th international conference on engineering and product design education, Design education - Growing our future, Dublin, Ireland, 5-6 September, 2013. Bohemia, E., Ion, W., Kovacevic, A., Lawlor, J., McGrath, M., McMahon, C., Parkinson, B., Reilly, G., Ring, M., Simpson, R. & Tormey, D. (eds.). Glasgow: The Design Society, Institution of Engineering Designers, p. 414-419 6 p. (International Conference on Engineering and Product Design Education).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Risk management in product recovery: need for a framework in risk assessment, mitigation and elimination

    Tapaninaho, M., Bernstein, W. Z., Ramanujan, D., Koho, M. & Torvinen, S., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Production Engineering, p. 961-968 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Robot modelling and collision detection with MATLAB robotics toolbox

    Deng, X., Lobov, A. & Martinez Lastra, J. L., 2012, Proceedings of the 16th International Conference on Mechatronics Technology, ICMT 2012, 16-19 October, 2012, Tianjin, China. Dante, J. D. G. (ed.). Tianjin: Tianjin University, p. 392-397 (International Conference on Mechatronics Technology).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Role based self-adaptation of reconfigurable robotized systems for sustainable manufacturing

    Salminen, K. & Kovac, I., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Production Engineering, p. 1005-1013 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Role based self-organisation of reconfigurable robotized compact systems for sustainable manufacturing

    Salminen, K., Nylund, H. & Andersson, P., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Pruduction Engineering, p. 8 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Role-based visualization of industrial IoT-based systems

    Mahmoodpour, M., Lobov, A., Lanz, M., Mäkelä, P. & Rundas, N., 27 Aug 2018, 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018. IEEE, 8 p. 8449183

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Role of VR throughout the life of low volume products towards digital extended enterprises

    Leino, S-P., Pulkkinen, A. & Anttila, J. P., 2017, Product Lifecycle Management and the Industry of the Future - 14th IFIP WG 5.1 International Conference, PLM 2017, Revised Selected Papers. Springer New York LLC, p. 404-415 12 p. (IFIP Advances in Information and Communication Technology; vol. 517).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    Roll-to-roll coating by liquid flame spray nanoparticle deposition

    Mäkelä, J. M., Haapanen, J., Aromaa, M., Teisala, H., Tuominen, M., Stepien, M., Saarinen, J. J., Toivakka, M. & Kuusipalo, J., 2015, Materials Research Society Symposium Proceedings. MATERIALS RESEARCH SOCIETY, Vol. 1747. p. 37-42 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Download list To download, please limit the number of search results to 1,000 or less.