Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Conference contribution › Scientific › Peer-reviewed
  2. Published

    Enhancing laser scanner accuracy by grid correction

    Halme, R-J., Kumpulainen, T. & Tuokko, R., 2010, Photonics West 2010 - MOEMS-MEMS: Micro- and Nanofabrication, 23-28 January, 2010, San Francisco, California, USA. Proceedings of SPIE. Maher, M. A., Chiao, J-C. & Resnick Paul, J. (eds.). Bellingham, WA: SPIE, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Equal coded digital hydraulic valve system - improving tracking control with pulse frequency modulation

    Paloniitty, M., Linjama, M. & Huhtala, K., 2014, The Second International Conference on Dynamics and Vibroacoustics of Machines, September 15-17, 2014, Samara, Russia. p. 618-626 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Evaluating the confidence level of prognostic predictions

    Lumme, V. & Pylvänen, M., 2012, 2012 IEEE Conference on Prognostics and Health Management PHM, 18-21 June 2012, Denver, CO, USA. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 1-6 6 p. (IEEE International Conference on Prognostics and Health Management).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Evaluating the structural complexity of a product family

    Rissanen, N., Malmqvist, J. & Pulkkinen, A., 2012, The 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Dorian, M., Mario, S., Neven, P. & Nenad, B. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, p. 1597-1604 (International Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Evaluation of the teaching of a simple theory through different teaching disciplines

    Saarenrinne, P., 2012, ICERI2012 Proceedings, 5th International Conference of Education, Research and Innovation 19.-21.11.2012, Madrid, Spain. Barcelona: International Association of Technology, Education and Development IATED, p. 939-942 (International Conference of Education, Research and Innovation).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Evolution equations based approach for modeling of fatigue in amorphous glassy polymers. On the investigation of fatigue damage development in polycarbonate

    Holopainen, S., 2016, Proc. of VII European Congress on Computational Methods in Applied Sciences and Engineering , ECCOMAS Congress 2016. : M. Papadrakakis, V. Papadopoulos, G. Stefanou, V. Plevris (eds.) . Crete Island, Greece, 5 – 10 June 2016. Papadrakakis, M., Papadopoulos, V., Stefanou, G. & Plevris, V. (eds.). p. 6675-6687 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Evolvable micro production systems: specific needs and differences to macro

    Hofmann, A., Bretthauer, G., Siltala, N. & Tuokko, R., 2011, IEEE International Symposium on Assembly and Manufacturing, ISAM 2011, 25-27 May, 2011, Tampere Hall, Tampere, Finland. Piscataway, NJ: IEEE, p. 1-6 6 p. (IEEE International Symposium on Assembly and Manufacturing ISAM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Examples of technical cleanliness of fluid power components

    Kuosku, M., Pekkonen, J. & Rinkinen, J., 2013, The Tenth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM2013/MFPT2013, 18-20 June 2013, Krakow, Poland. Coxmoor Publishing, p. 1-12 12 p. (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Experiences of Online Measurements in Technical Cleanliness of Fluid Power System

    Elo, L., Pekkonen, J. & Rinkinen, J., 2013, The Tenth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM2013/MFPT2013, 18-20 June 2013, Krakow, Poland. Coxmoor Publishing, p. 1-9 9 p. (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Experimental evaluation of a digital hydraulic power management system

    Heikkilä, M., Tammisto, J., Huova, M., Huhtala, K. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 129-142

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Experimental evaluation of a piston-type digital pump-motor-transformer with two independent outlets

    Heikkilä, M., Tammisto, J., Huova, M., Huhtala, K. & Linjama, M., 2010, Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK. Johnston, D. N. & Plummer, A. (eds.). p. 83-97

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Experimental investigation of the impact response of novel steelbiocomposite hybrid materials

    Ramakrishnan, K., Hokka, M., Sarlin, E., Kanerva, M., Kouhia, R. & Kuokkala, V-T., 7 Sep 2018, DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading . EDP Sciences, Vol. 183. 6 p. (EPJ WEB OF CONFERENCES).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Experimental results in Component Cleanliness of Fluid Power

    Rinkinen, J., Elo, L., Kuosku, M. & Pekkonen, J., 2013, The 26th International Congress of Condition Monitoring and Diagnostic Engineering Management, COMADEM 2013, 11-13 June, Helsinki. 8 p. (International Congress of Condition Monitoring and Diagnostic Engineering Management).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Experimental study on control system distribution and effects of remote control in hydraulic mobile machines

    Uusisalo, J., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Experimental study on effects of remote control and control system distribution in hydraulic mobile machines

    Uusisalo, J. & Huhtala, K., 2010, Proceedings of the Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, CERN, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Exploring additive manufacturing design space using bayesian network: a case study on reducing curling defect

    Mokhtarian, H., Hamedi, A. & Coatanea, E., 11 Dec 2018, NAFEMS 2018: Exploring the Design Freedom of Additive Manufacturing through Simulation: 10-11 Dec. 2018, Helsinki. Helsinki, Finland

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Extrusion-coated sealing layers on ALD-Al2O3 coated polymer substrate: Interfacial and Adhesion properties

    Lahtinen, K., Johansson, P., Kääriäinen, T., Cameron, D. C. & Kuusipalo, J., 2012, TAPPI PLACE Conference 2012: Helping Me Do My Job Better, 6-9 May 2012, Seattle, WA, United States. p. 543-562 20 p. (TAPPI European PLACE Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Factors affecting to exploitation of modularity

    Lehtinen, J., Lehtonen, T., Juuti, T. & Riitahuhta, A., 2012, Proceedings of The Ninth Norddesign Conference 2012, 22-24 August, 2012, Aalborg, Denmark. Poul, K. H. J. R., Kaj, J. & Christian, T. (eds.). Aalborg, Denmark: Aalborg university, p. 1-10 10 p. (Norddesign conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Fatigue Lifetime Estimation of Machine Component Using Accelerated Testing

    Hietala, J-P., Ojala, P., Multanen, P., Miettinen, J. & Saarenrinne, P., 2017, ESREL 2017. CRC Press

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Fatigue properties of laser clad round steel bars

    Tuominen, J., Näkki, J., Poutala, J., Miettinen, J., Peltola, T., Vuoristo, P., Rasehorn, I., Alam, M. & Kaplan, A., 2013, Proceedings of 32nd International Congress on Applications of Lasers & Electro-Optics ICALEO, October 6-10, 2013, Miami, FL, USA. Laser Institute of America, p. 998-1007 10 p. P140. (International Congress on Applications of Lasers and Electro-Optics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Fault Tolerance with digital Hydraulic Valve System

    Siivonen, L., Linjama, M. & Vilenius, M., 2011, The Eight International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20-22 June 2011, Cardiff, Wales. Northamption: British Institute of Non-destructive Testing, p. 1250-1262 (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Fault-tolerant control of a multi-outlet digital hydraulic pump-motor

    Heikkilä, M. & Linjama, M., Mar 2018, Fluid power networks: Proceedings of the 11th International Fluid Power Conference, 19th-21st March 2018, Aachen. Murrenhoff, H. (ed.). Aachen University: RWTH Publications, Vol. 1. p. 145-157 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Fault-tolerant scheduling of stateful tasks in uniprocessor real-time systems

    Alexeev, P., Boström, P., Walden, M., Huova, M., Linjama, M. & Sere, K., 2013, 3rd International Conference on Pervasive Embedded Computing and Communication Systems, PECCS 2013, Barcelona, Spain, 19.-21.2.2013. Benavente-Peces, C. & Filipe, J. (eds.). SCITEPRESS, p. 189-194 6 p. (International Conference on Pervasive Embedded Computing and Communication Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Feature recognition as a basis for the cost allocation and decision making toolset

    Lanz, M., Luostarinen, P., Garcia, F. & Andersson, P. H., 2009, Proceedings of the 20th International Conference on Production Research, ICPR'2009, August 2009, Shanghai, China. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Filtering scheme for context-aware fog computing in cyber-physical systems

    Mononen, T., M. Aref, M. & Mattila, J., 2018, 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications (MESA): 2-4 July 2018, Oulu.. Oulu: IEEE, 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Finnish manufacturing companies' views on sustainable development and sustainable production

    Koho, M., Kuusela, J., Tapaninaho, M. & Torvinen, S., 2011, Proceedings of the 4th International Swedish Production Symposium, SPS11 3-5 May, 2011, Lund, Sweden. Ståhl, J-E. (ed.). Lund: The Swedish Production Academy, p. 407-413 (International Swedish Production Symposium SPS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Flexible gripper system for small optical assemblies - final tests and findings

    Prusi, T., Heikkilä, R., Ha, T. H., Song, J. Y., Lee, C. W. & Tuokko, R., 2012, Precision assembly technologies and systems. Proceedings of the 6th IFIP WG 5.5 International precision assembly seminar, IPAS 2012, 12-14 February, 2012, Chamonix, France. Svetan, R. (ed.). Heidelberg: Springer, p. 55-64 (IFIP Advances in Information and Communication Technology; vol. 371).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Formal Information Model for Representing Production Resources

    Siltala, N., Järvenpää, E. & Lanz, M., Sep 2016, Advances in Production Management Systems: Initiatives for a Sustainable World - IFIP WG 5.7 International Conference, APMS 2016, Revised Selected Papers. Springer, p. 53-60 8 p. (IFIP Advances in Information and Communication Technology; vol. 488).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Formalising connections between products, processes and resources - towards semantic knowledge management system

    Lanz, M., Järvenpää, E., Luostarinen, P., Tenhunen, A., Tuokko, R. & Rodriguez, R., 2011, Proceedings of the 4th International Swedish Production Symposium, SPS11 3-5 May, 2011, Lund, Sweden. Ståhl, J-E. (ed.). Lund: The Swedish Production Academy, p. 425-431 (International Swedish Production Symposium SPS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Formal modelling of complex event processing: a generic algorithm and its application to a manufacturing line

    Ahmad, W., Lobov, A. & Martinez Lastra, J. L., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway, NJ: IEEE, p. 380-385 (IEEE International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Formal Resource and Capability Descriptions Supporting Rapid Reconfiguration of Assembly Systems

    Järvenpää, E., Siltala, N. & Lanz, M., Aug 2016, Proceedings of the 12th Conference on Automation Science and Engineering, and International Symposium on Assembly and Manufacturing. IEEE, p. 120-125 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Framework and feasibility study for pairwise comparison tool

    Ellman, A., Wendrich, R. & Tiainen, T., 21 Aug 2016, Proceedings of the ASME 2016 Computers and Information in Engineering Conference IDETC/CIE 2016. Charlotte, North Carolina: ASME, 7 p. DETC2016-59886

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Framework and toolset for developing and realizing sustainable production systems

    Nylund, H., Koho, M. & Torvinen, S., 2010, Proceedings of the 20th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2010, July 12-14, 2010, California State University East Bay, USA. p. 294-301

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Framework for distributed manufacturing systems

    Nylund, H., Salminen, K. & Andersson, P. H., 2011, Enabling Manufacturing Competitiveness and Economic Sustainability, Proceedings of the 4th International Conference on Changeable, Agile, Reconfigurable and Virtual production CARV2011, Montreal, Canada, 2-5 October 2011. ElMaraghy, H. (ed.). Berlin: Springer, p. 172-177 (International Conference on Changeable, Agile, Reconfigurable and Virtual production CARV).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Free shape paths in industrial robots

    Gonzalez Moctezuma, L. E., Lobov, A. & Martinez Lastra, J. L., 2012, Proceedings of the 38th Annual Conference of the IEEE Industrial Electronics Society, IECON 2012, 25-28 October, 2012, Montreal, Quebec, Canada. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 3739-3743 (Annual Conference of the IEEE Industrial Electronics Society).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Fretting fatigue of quenched and tempered steel in contact with bronze

    Hintikka, J., Lehtovaara, A. & Mäntylä, A., 2012, 15th Nordic Symposium on Tribology, NordTrib 2012, 12-15 June 2012, Trondheim, Norway. Trondheim: NTNU Norwegian University of Science and Technology, p. 1-6 6 p. (Nordic Symposium on Tribology).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    From measurements data to information

    Krogerus, T., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop , November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 51-62 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Fuel optimal controller for hydrostatic drives: A simulation study and model validation

    Backas, J., Ghabcheloo, R., Hyvönen, M. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Full-Dynamics-Based Bilateral Teleoperation of Hydraulic Robotic Manipulators

    Lampinen, S., Koivumäki, J. & Mattila, J., Aug 2018, 2018 IEEE 14th International Conference on Automation Science and Engineering (CASE). IEEE, p. 1343-1350 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Fundamentals of Digital Microhydraulic

    Linjama, M., 2012, Proceedings of the 8th International Fluid Power Conference, Dresden, March 26-28, 2012. Dresden: Technische Universität Dresden, Institute of Fluid Power, p. 385-396 (International Fluid Power Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Gain Scheduling Full State Feedback with D-Implementation for Velocity Tracking of Hydrostatic Drive Transmission

    Backas, J., Ghabcheloo, R. & Huhtala, K., 2015, Proceedings of the Fourteenth Scandinavian International Conference on Fluid Power, SICFP15. May 20-22, 2015. Tampere, Finland. Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 64-75 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Accepted/In press

    Gas-liquid ratio imbalance indicators of a fighter aircraft shock absorber

    Heininen, A., Aaltonen, J., Koskinen, K. & Huitula, J., 2019, (Accepted/In press) Proceedings of the 13th World Congress on Engineering Asset Management: WCEAM, 24-26 September 2018, Stavanger, Norway. Springer-Verlag, Berlin

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Generic Microcontroller Board for Automated Heavy Machinery with Modular Control System

    Karhu, O. & Huhtala, K., 2013, SAE 2013 Commercial Vehicle Engineering Congress (COMVEC), October 1-3, 2013, Rosemont, Illinois, USA. SAE, p. 1-7 7 p. 2013-01-2386. (SAE Technical Papers).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Geometrically exact beam formulation versus absolute nodal coordinate formulation

    Mäkinen, J. & Matikainen, M., 2010, The 1st Joint International Conference on Multibody System Dynamics, May 25-27, 2010, Lappeenranta, Finland. p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Geometry-Aided Angular Acceleration Sensing of Rigid Multi-Body Manipulator Using MEMS Rate Gyros and Linear Accelerometers

    Vihonen, J., Honkakorpi, J., Mattila, J. & Visa, A., 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) November 3-7, 2013, Tokyo, Japan. Institute of Electrical and Electronics Engineers IEEE, p. 2514-2520 7 p. (IEEE/RSJ International Conference on Intelligent Robots and Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Geometry-Aided Inversion of Manipulator Telescopic Link Length from MEMS Accelerometer and Rate Gyro Readings

    Vihonen, J., Honkakorpi, J., Mattila, J. & Visa, A., 2014, 2014 IEEE International Conference on Robotics & Automation (ICRA) Hong Kong Convention and Exhibition Center, May 31 - June 7, 2014. Hong Kong, China. Institute of Electrical and Electronics Engineers IEEE, p. 181-186 6 p. (IEEE International Conference on Robotics & Automation (ICRA)).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Geometry-Aided Low-Noise Angular Velocity Sensing of Rigid-Body Manipulator Using MEMS Rate Gyros and Linear Accelerometers

    Vihonen, J., Honkakorpi, J., Koivumäki, J., Mattila, J. & Visa, A., 2014, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Besancon, France, July 8-11, 2014. Piscataway, NJ: IEEE, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Geometry-Aided MEMS Motion State Estimation for Multi-Body Manipulators

    Vihonen, J., Honkakorpi, J., Mattila, J. & Visa, A., 2013, 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2013, Mechatronics for Human Wellbeing, July 9-12, 2013, Wollongong, Australia. Institute of Electrical and Electronics Engineers IEEE, p. 341-347 7 p. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Geometry of plate fins for maximizing heat transfer

    Karvinen, R. & Karvinen, T., 2010, 14th International Heat Transfer Conference IHTC-14, August 8-13, 2010, Washington DC, USA. ASME, p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    GIMsim: Hardware in the loop simulator for autonomous hydraulic mobile machines

    Ghabcheloo, R., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-13 13 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1...5 6 7 8 9 10 11 12 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.