Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Conference contribution › Scientific › Not peer-reviewed
  2. Published

    Multicriterion approach to minimum compliance topology optimization of trusses with comparison to stress-constrained minimum weight design

    Mela, K. & Koski, J., 2010, Advances and Trends in Structural Engineering, Mechanics and Computation. Zingoni, A. (ed.). p. 1081-1084

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  3. Published

    Novel approach on application manufacturing using inkjet printing, laser ablation and new polymer substrate

    Kunnari, E., Karttunen, M., Kumpulainen, T., Kortet, S., Laine-Ma, T., Mäntysalo, M., Smalen, M. & Ruuskanen, P., 2010, ICEP2010. International Conference on Electronics Packaging, May 12-14, 2010, Hokkaido, Japan. p. 249-254

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  4. Published

    Numerical modelling of bit-rock interaction in percussive drilling

    Saksala, T., 2010, ECCM 2010, IV European Conference on Computational Mechanics, May 16-21, 2010, Paris, France. p. 1-2 2 p. 2078

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  5. Published

    Numerical Simulation of Dynamic Brazilian Disc Test on Rock

    Saksala, T., Hokka, M., Kuokkala, V-T. & Mäkinen, J., 2011, Proceedings of the 24th Nordic Seminar on Computational Mechanics, Aalto University publication series. SCIENCE + TECHNOLOGY. Freund, J. & Kouhia, R. (eds.). Espoo: Aalto University, p. 154-157 (Nordic Seminar on Computational Mechanics; vol. 23/2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  6. Published

    ON3 - Biohybrid nanocomposite coatings from sonicated chitosan and nanoclay

    Vartiainen, J., Tuominen, M. & Nättinen, K., 2010, 4th Shelf Life International Meeting (SLIM), June 23-25, 2010, Zaragoza, Spain. p. 24-24

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  7. Published

    On the choice of damage variable in the continuum fatigue model based on a moving endurance surface

    Saksala, T., Holopainen, S. & Kouhia, R., May 2015, Proceedings of the XII Finnish Mechanics Day. p. 57-62 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  8. Published

    On the direct solution of critical equilibrium states

    Erikson, A., Kouhia, R. & Mäkinen, J., Jun 2015, Proceeding of the XII Finnish Mechanics Days. Kouhia, R., Mäkinen, J., Pajunen, S. & Saksala, T. (eds.). Helsinki: Rakenteiden Mekaniikan Seura ry, p. 244-247 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  9. Published

    On the effect of damping on stability of non-conservative systems

    Jeronen, J. & Kouhia, R., 2015, Proceedings of the XII Finnish Mechanics Days: Suomen XII mekaniikkapäivien esitelmät. Kouhia, R., Mäkinen, J., Pajunen, S. & Saksala, T. (eds.). Rakenteiden Mekaniikan Seura ry, p. 77 82 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  10. Published

    On the numerical solution of a micropolar continuum model

    Kouhia, R. & Niemi, A. H., 2013, Proceedings of the 26th Nordic Seminar on Computational Mechanics, Oslo, 23 - 25 October, 2013. Logg, A., Mardal, K. A. & Massing, A. (eds.). Center for Biomedical Computing, Simula Research Laboratory, p. 128-131 4 p. (Nordic Seminar on Computational Mechanics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  11. Published

    On the numerical solution of steady-state equations of digital hydraulic valve-actuator system

    Linjama, M., 24 May 2016, Proceedings of the eighth workshop on digital fluid power. Uusi-Heikkilä, J. & Linjama, M. (eds.). Tampere: Tampere University of Technology, p. 141-155

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  12. Published

    On the relation of business processes and engineering change management

    Pulkkinen, A. & Riitahuhta, A., 2009, Proceedings of the 6th International Product Lifecycle Management conference, PLM09, 6-8 July 2009, Bath, UK. McMahon, C., Dutta, D. & Huang, G. (eds.). p. 10 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  13. Published

    On vibroacoustic analysis of grinding contact vibrations

    Järvenpää, V-M., Yuan, L. & Kalbasi Shirvani, H., 2014, Proceedings of the 21st International Congress on Sound and Vibration, In Depth Sound and Vibration Research, 2014 ICSV21, 13-17 July, 2014, Beijing. Crocker, M. J., Pawelczyk, M. & Tian, J. (eds.). International Institute of Acoustics and Vibration (IIAV), p. 2431-2436 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  14. Published

    Out of plane actuator concept and characterization of dielectric elastomer EAP materials

    Paajanen, M., Jouppila, V., Ellman, A., Bauer, S., Kofod, G., Karesoja, M. & Tenhu, H., 2006, Applied Material Research at VTT, Helsinki, 2006. Ritschkoff, A-C., Koskinen, J. & Paajanen, M. (eds.). Helsinki: VTT, p. 50-60

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  15. Published

    PLM state of the practice and future challenges in globally networked manufacturing companies

    Pulkkinen, A., Rissanen, N. & Vainio, V., 2013, Proceedings of the PDM2013 conference, The 1st PDM Forum for Finland-Russia Collaboration, 24.-25.4.2013, Lappeenranta. Huhtala, M. & Eskelinen, H. (eds.). Lappeenranta: Lappeenranta University of Technology, p. 69-75 7 p. (LUT Scientific and Expertise Publication. Tutkimusraportit; no. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  16. Published

    Position control fo PWM-actuated pneumatic musckle actuator system

    Jouppila, V. & Ellman, A., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA. New York, NY: ASME, (ASME International Mechanical Engineering Congress and Exposition IMECE2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  17. Published

    Prediction of the Transient Effects in Glassy Polymers

    Holopainen, S., 2012, Proceedings of the 11th Finnish Mechanics Days. XI Suomen Mekaniikkapäivät, Oulun yliopisto 29.-30.11.2012. Hannu, K. & Mikko, M. (eds.). Oulu: Oulun yliopisto, p. 9-14 (Finnish Mechanics Days. Suomen Mekaniikkapäivät).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  18. Published

    Proportional valve control of water-hydraulic systems

    Sairiala, H. & Koskinen, K. T., 2012, Topic water hydraulics, Dutch Fluid Power Conference, Ede, The Netherlands 13th September 2012. Vereniging Platform Hydrauliek, p. 49-63 (Dutch Fluid Power Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  19. Published

    Radial compression behavior of Norway spruce at high strain-rate

    Moilanen, C., Björkqvist, T., Saarenrinne, P., Engberg, B. A. & Salminen, L., 2013, 8th International Fundamental Mechanical Pulp Research Seminar, 29 - 31 January, 2013, Åre, Sweden. p. 10-11 2 p. (International Fundamental Mechanical Pulp Research Seminar).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  20. Published

    Reducing indoor temperatures in summer usging natural night cooling

    Viot, M. & Kalema, T., 2014, Sisäilmastoseminaari 2014, Messukeskus, Helsinki 13.3.2014.. Säteri, J. & Backman, H. (eds.). Espoo: SIY SISÄILMATIETO OY, p. 281-286 6 p. (SIY Raportti; no. 32).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  21. Published

    Requirement considerations for ubiquitous integration of cooperation objects

    Karnouskos, S., Villasenor Herrera, V., Haroon, M., Handte, M. & Marron, P. J., 2011, 4th IFIP International Conference on New Technologies, Mobility and Security, NTMS 2011, 7-10 February, 2011, Paris, France. Piscataway, NJ: IEEE, p. 1-5 5 p. (IFIP International Conference on New Technologies, Mobility and Security NTMS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  22. Published

    Researching PLM process in industry - Case of benchmarking ECM

    Pulkkinen, A., Markova, T. & Rissanen, N., 2011, The 8th International Conference on Product Lifecycle Management, PLM11, 11-13 July, 2011, Technische Universiteit Eindhoven, The Netherlands. Eindhoven: IFIP, p. 1-10 10 p. (International Conference on Product Lifecycle Management PLM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  23. Published

    Robots for micro and desktop factories: examples and experiences

    Prusi, T., Vuola, A., Siltala, N., Heikkilä, R. & Tuokko, R., 2010, Proceedings of the joint conference of the 41st International Symposium on Robotics, ISR 2010, and 6th German Conference on Robotics, ROBOTIK 2010, 7-9 June, 2010, Munich, Germany. p. 1088-1094

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  24. Published

    Simulating the Drag Coefficient of a Spherical Autonomous Underwater Vehicle

    Heininen, A., Aaltonen, J. & Koskinen, K. T., 9 Oct 2017, Proceedings of the 2nd Annual SMACC Research Seminar 2017. Aaltonen, J., Virkkunen, R., Koskinen, K. T. & Kuivanen, R. (eds.). Tampere: Tampere University of Technology, Vol. 2. p. 53-56 4 p. 14

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  25. Published

    Simulation and advanced control of transient behaviour in gyratory cone crushers

    Itävuo, P., Jaatinen, A. & Vilkko, M., 2011, 8th International Mineral Processing Seminar, Santiago, Chile, 30.11-2.12.2011. Kracht, W., Kuyvenhoven, R., Lynch-Watson, S. & Montes-Atenas, G. (eds.). Santiago: Gecamin, p. 63-72 (International Mineral Processing Seminar).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  26. Published

    Sisäilman laadun parantaminen käyttämällä siirtoilmaa - Uusia ratkaisuja

    Kalema, T., Lassila, A-P. & Viot, M., 2014, Sisäilmastoseminaari 2014, Messukeskus, Helsinki 13.3.2014. Säteri, J. & Backman, H. (eds.). Espoo: SIY SISÄILMATIETO OY, p. 263-268 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  27. Published

    Stress raising in laser clad components depending on geometry and defects

    Kaplan, A. F. H., Alam, M. M., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkula, J., Peltola, T. & Barsoum, Z., 2013, The 14th Nordic Laser Materials Processing Conference, NOLAMP 14, August 26th - 28th 2013, Gothenburg, Sweden. Kaplan, A. & Engström, H. (eds.). Luleå: Luleå University of Technology, Department of Engineering Sciences and Mathematics, p. 281-292 12 p. (Nordic Laser Materials Processing Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  28. Published

    Support-condition analyses of rotating beams under distributed imbalance loading

    Jokinen, K., Keskinen, E., Jorkama, M. & Seemann, W., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA. New York, NY: ASME, p. 325-334 (ASME International Mechanical Engineering Congress and Exposition IMECE2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  29. Published

    Sustainable manufacturing and eco-factories within sustainable industrial areas within fast growing eco-cities

    Leino, T., Salminen, K. & Joutsiniemi, A., 2011, 21st International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2011, 26-29 June, 2011, Taichung, Taiwan. Taichung: FAIM 2011, p. 747-754 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  30. Published

    Switching control of a water hydraulic cylinder with slow parallel-connected on/off valves

    Linjama, M., Grönholm, J. & Paloniitty, M., 28 Feb 2019, The 10th Workshop on Digital Fluid Power : February 28th-March 1st, 2019, Linz, Austria. Linz Center of Mechatronics, 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  31. Published

    Symmetrization of Tensors on General Spaces and Their Applications in Continuum Mechanics

    Holopainen, S., 2009, Proceedings of 7th EUROMECH Solid Mechanics Conference - Lectures and General Sessions. Ambrosio, J. A. C. & Silva, M. P. T. (eds.). APMTAC, p. 63-64 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  32. Published

    Systeemiteoreettiset mallit liiketoiminnan kehittämisen tukena

    Huttunen, P. & Laurikkala, H., 2011, Automaatio XIX Seminaari, 15-16.3.2011, Helsinki. SAS julkaisusarja. Visala, A. (ed.). Helsinki: Suomen Automaatioseura, p. 1-6 6 p. (Automaatio Seminaari; vol. 41).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  33. Published

    The goals of assessment

    Vanhatalo, M., Lehtonen, T., Juuti, T., Pakkanen, J. & Riitahuhta, A., 2010, Proceedings of The 12th International Conference on Engineering and Product Design Education, When Design Education and Design Research meet..., Norwegian University of Science and Technology, 2-3 September, 2010, Trondheim, Norway. E&PDE2010, p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  34. Published

    The influence of chatter vibration on the cylindrical transverse grinding machine spindle

    Kalbasi Shirvani, H., Yuan, L. & Järvenpää, V-M., 2014, Proceedings of the 21st International Congress on Sound and Vibration , In Depth Sound and Vibration Research, 2014, ICSV21, 13-17 July, 2014, Beijing, China. Crocker, M. J., Pawelczyk, M. & Tian, J. (eds.). International Institute of Acoustics and Vibration (IIAV), p. 3280-3287 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  35. Published

    The module system and its requirements for PDM/PLM systems

    Pakkanen, J., Lehtinen, J., Juuti, T. & Lehtonen, T., 2013, Proceedings of the PDM2013 conference, The 1st PDM Forum for Finland-Russia Collaboration, 24.-25.4.2013, Lappeenranta. Huhtala, M. & Eskelinen, H. (eds.). Lappeenranta: Lappeenranta University of Technology, p. 91-97 7 p. (LUT Scientific and Expertise Publications. Tutkimusraportit; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  36. Published

    Thermoelastic response of thin-walled cylindrical shell under the effect of moving point load and heas source

    Keskinen, E., Karvinen, T., Dospel, V. & Cotsaftis, M., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA. New York, NY: ASME, p. 1-10 10 p. (ASME International Mechanical Engineering Congress and Exposition IMECE2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  37. Published

    The role of university centre for continuing education in the creation and implementation of innovation management education

    Siekkinen, R. & Riitahuhta, A., 2009, The 17th International Conference on Engineering Design ICED'09, 24-27 August, 2009, Stanford, California, USA. p. 195-202

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  38. Published

    Thin-shell response to machining loads

    Dospel, V. & Keskinen, E., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA. New York, NY: ASME, p. 1-10 10 p. (ASME International Mechanical Engineering Congress and Exposition IMECE2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  39. Published

    Tool for concept evaluation based on the properties of the concept and the business environment

    Vanhatalo, M., Lehtonen, T., Pakkanen, J., Juuti, T. & Riitahuhta, A., 2010, Proceeding of 11th International Design Conference DESIGN 2010, 17-20 May, 2010, Dubrovnik, Croatia. p. 965-974

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  40. Published

    Towards automatic reconfiguration planning of changeable assembly systems

    Järvenpää, E. & Tuokko, R., 2010, Proceeding of Post-Graduate Workshop on Intelligent Machines and Transport Systems, 3-7 May 2010, CERN, Switzerland. p. 79-89

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  41. Published

    Transpositions and duals high-order tensors. On theory and applications in mechanics

    Holopainen, S., 4 Jun 2015, Proceedings of the XII Finnish Mechanics Days: Suomen XII mekaniikkapäivien esitelmät. Kouhia, R. (ed.). Rakenteiden Mekaniikan Seura ry, p. 188-193 6 p. (Journal of Structural Mechanics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  42. Published

    Urban Eco-Factory compatibility of residential and industrial zones

    Leino, T., Salminen, K. & Joutsiniemi, A., 2011, The 6th International Conference on Industrial Ecology, ISIE 2011, 7-10 June, 2011, University of California, Berkeley, USA. Berkeley, CA: International Society for Industrial Ecology, p. 1-9 9 p. (International Conference on Industrial Ecology ISIE).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  43. Published

    Uusi menetelmä tuotantojärjestelmän rakentamiseen valmiista moduuleista

    Siltala, N. & Tuokko, R., 2011, Automaatio XIX Seminaari, 15-16.3.2011, Helsinki. SAS julkaisusarja. Visala, A. (ed.). Helsinki: Suomen Automaatioseura, p. 1-6 6 p. (Automaatio Seminaari; vol. 41).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  44. Published

    Ventilation and indoor air quality in school buildings

    Kalema, T. & Viot, M., 2013, Sisäilmastoseminaari 2013, Messukeskus, Helsinki 13.3.2013. Säteri, J. & Backman, H. (eds.). SIY Sisäilmayhdistys ry, p. 91-96 6 p. (SIY Raportti; no. 31).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  45. Published

    Viewpoints on digital, Virtual, and real aspects of manufacturing systems

    Nylund, H. & Andersson, P. H., 2011, Proceedings of the 7th International Conference on Digital Enterprise Technology, DET 2011, 28-30 September, 2011, Athens, Greece. Chryssolouris, G. & Mourtzis, D. (eds.). Athens: University of Patras, Laboratory for Manufacturing Systems and Automation, p. 504-511 (International Conference on Digital Enterprise Technology DET).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  46. Published

    Views to micro and desktop factories - from miniaturization of products to minaturization of production equipment and factories

    Tuokko, R., 2006, Philips Precision Technology Conference (PPTC), 3-4 October, 2006, Philips Management Training and Conference Centre Groenendael, Hilvarenbeek, The Netherlands. p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  47. Published

    Voiteluaineen vaihdon vaikutus

    Miettinen, J., 2010, Värähtelyklinikka 2010, Kunnonvalvonnan uudistaminen, Kunnossapitoyhdistys, 14.-16.4.2010, Silja Symphony, Helsinki-Tukholma-Helsinki. p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  48. Published

    Wood compression model for radial compression of earlywood and latewood

    Moilanen, C., Björkqvist, T. & Saarenrinne, P., 2015, Proceedings of the XII Finnish Mechanics Days. Rakenteiden Mekaniikan Seura ry, p. 261-266 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  49. Published

    Workers' tacit knowledge transferred to conceptual design: the case of mobile work machine

    Tiainen, T., Ellman, A. & Kaapu, T., 2013, Co-Create 2013, The Boundary-Crossing Conference on Co-Design in Innovation. Smeds, R. & Irrmann, O. (eds.). Aalto University School of Science, Department of Industrial Engineering and Management, SimLab, p. 709-720 12 p. (Aalto University publication series SCIENCE + TECHNOLOGY; vol. 15, no. 2013).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  50. Conference contribution › Scientific › Peer-reviewed
  51. Published

    3D Attitude Calculation for the Grasper of a Crane System with a Rotary Gyroscope

    Zhang, X., Mustalahti, P., Peltola, E. & Mattila, J., Nov 2018, 2018 Ninth International Conference on Intelligent Control and Information Processing (ICICIP). IEEE, p. 229-235 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  52. Published

    3d numerical simulation of rock fracture due to multiple button bit in percussive drilling

    Saksala, T., 2012, Proceedings of the 2012 ISRM International Symposium - EUROCK 2012, Rock Engineering and Technology for Sustainable Underground Construction, 28-30 May Stockholm. International Society for Rock Mechanics ISRM, p. 1-12 12 p. (ISRM International Symposium).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1...6 7 8 9 10 11 12 13 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.