Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Review Article › Scientific › Peer-reviewed
  2. Published

    Barkhausen Noise Probes and Modelling: A Review

    Santa-aho, S., Laitinen, A., Sorsa, A. & Vippola, M., 1 Dec 2019, In : Journal of Nondestructive Evaluation. 38, 4, 94.

    Research output: Contribution to journalReview ArticleScientificpeer-review

  3. Conference contribution › Scientific › Peer-reviewed
  4. A framework for building behavioral models for design-stage failure identification using dimensional analysis

    Coatanéa, E., Ritola, T., Tumer, I. Y. & Jensen, D., 2010, Proceedings of the ASME Design Engineering Technical Conference. AMER SOC MECHANICAL ENGINEERS, Vol. 5. p. 591-601 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    An origami inspired reconfigurable spiral antenna

    Saintsing, C. D., Cook, B. S. & Tentzeris, M. M., 2014, 38th Mechanisms and Robotics Conference. The American Society of Mechanical Engineers ASME, Vol. 5B.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    A Reduced-Order Two-Degree-of-Freedom Composite Nonlinear Feedback Control for a Rotary DC Servo Motor

    Pyrhönen, V-P., Koivisto, H. & Vilkko, M., 12 Dec 2017, Proceedings of the 56th IEEE Conference on Decision and Control. Melbourne, Australia, p. 2065-2071 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    A system for real-time detection and tracking of vehicles from a single car-mounted camera

    Caraffi, C., Vojir, T., Trefný, J., Šochman, J. & Matas, J., 2012, 2012 15th International IEEE Conference on Intelligent Transportation Systems, ITSC 2012. p. 975-982 8 p. 6338748

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Biomimetic hemo-compatible surfaces of polyurethane by grafting copolymer brushes of poly(ethylene glycol) and poly(phosphorylcholine methacrylate)

    Yang, D., Feng, Y., Behl, M., Lendlein, A., Zhao, H., Khan, M. & Guo, J., 2012, Multifunctional Polymer-Based Materials. Vol. 1403. p. 171-176 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Block copolymer self-assembly on ethylene glycol (EG) self-assembled monolayer (SAM) for nanofabrication

    Borah, D., Rasappa, S., Kosmala, B., Holmes, J. D. & Morris, M. A., 2012, Nanoscale Materials Modification by Photon, Ion, and Electron Beams. Vol. 1450. p. 8-13 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Branched thiophene oligomer/polymer bulk heterojunction organic solar cell

    Martinez, F., Neculqueo, G., Vasquez, S. O., Lemmetyinen, H., Efimov, A. & Vivo, P., 2015, Materials Research Society Symposium Proceedings. MATERIALS RESEARCH SOCIETY, Vol. 1737. p. 19-25 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Complete Odometry Estimation of a Vehicle Using Single Automotive Radar and a Gyroscope

    Ghabcheloo, R. & Siddiqui, S., 20 Aug 2018, MED 2018 - 26th Mediterranean Conference on Control and Automation. IEEE, p. 855-860 6 p. 8442474

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Deformability analysis and improvement in stretchable electronics systems through finite element analysis

    Di Vito, D., Mosallaei, M., Vahed, B. K., Kanerva, M. & Mäntysalo, M., 2020, Proceedings of XXIV AIMETA Conference 2019. Carcaterra, A., Graziani, G. & Paolone, A. (eds.). Springer, p. 755-763 9 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Design and Control of a Flexible Joint as a Hydraulic Series Elastic Actuator for Manipulation Applications

    Cao, X., Aref, M. M. & Mattila, J., 2019, Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems and Robotics, Automation and Mechatronics, CIS and RAM 2019. IEEE, p. 553-558 6 p. 9095773. (IEEE International Conference on Cybernetics and Intelligent Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Development and numerical implementation of an anisotropic continuum damage model for concrete

    Hartikainen, J., Kolari, K. & Kouhia, R., 2016, Advances in Fracture and Damage Mechanics XV. Trans Tech Publications Ltd, p. 115-118 4 p. (Key Engineering Materials; vol. 713).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    DIC measurements of the human heart during cardiopulmonary bypass surgery

    Hokka, M., Mirow, N., Nagel, H., Vogt, S. & Kuokkala, V-T., 2016, Conference Proceedings of the Society for Experimental Mechanics Series. Springer New York LLC, Vol. 6. p. 51-59 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Digital image correlation study of the deformation and functioning of the human heart during open-heart surgery

    Soltani, A., Curtze, S., Lahti, J., Järvelä, K., Laurikka, J., Hokka, M. & Kuokkala, V. T., 2018, Mechanics of Biological Systems, Materials and other topics in Experimental and Applied Mechanics - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Springer New York LLC, Vol. 4. p. 19-27 9 p. (Conference Proceedings of the Society for Experimental Mechanics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Dimension reduction and decomposition using causal graph and qualitative analysis for aircraft concept design optimization

    Wu, D., Coatanea, E. & Wang, G. G., 2017, 43rd Design Automation Conference. The American Society of Mechanical Engineers ASME

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Direct model predictive power control of a series-connected modular rectifier

    Rossi, M., Liegmann, E., Karamanakos, P., Castelli-Dezza, F. & Kennel, R., 1 May 2019, PRECEDE 2019: 2019 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics. IEEE, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Effect of air gap on the adhesion of PET layer on cardboard substrate in extrusion coating

    Suokas, E., 1 Jan 2017, 16th TAPPI European PLACE Conference 2017. TAPPI Press, p. 529-544 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Effect of polyolefin molecular structure on product properties in extrusion coating

    Suokas, E., 2019, 17th Biennial TAPPI European PLACE Conference 2019. TAPPI Press, p. 89-98 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Effect of pre-treatments on barrier properties of layers applied by atomic layer deposition onto polymer-coated substrates

    Vähä-Nissi, M., Hirvikorpi, T., Sievänen, J., Salo, E., Harlin, A., Johansson, P. & Kuusipalo, J., 2011, 13th European PLACE Conference 2011. Vol. 1. p. 447 1 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Effect of rotor pole-shoe construction on losses of inverter-fed synchronous motors

    Rasilo, P., Belahcen, A. & Arkkio, A., 2012, Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012. p. 1282-1286 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Effects of adiabatic heating estimated from tensile tests with continuous heating

    Vazquez Fernandez, N., Isakov, M., Hokka, M. & Kuokkala, V. T., 2018, Dynamic Behavior of Materials - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Springer New York LLC, Vol. 1. p. 1-7 7 p. (Conference Proceedings of the Society for Experimental Mechanics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    End-plate connections in Bi-axial bending - Measurements

    Mäkinen, J., Fränti, K., Korhonen, M., Fillion, J. & Heinisuo, M., 2016, 13th International Aluminium Conference, Sustainability, Durability and Structural Advantages, : INALCO 2016; Naples; Italy; 21 September 2016 through 23 September 2016. Mazzolani, F. M., Squillace, A., Faggiano, B. & Bellucci, F. (eds.). Trans Tech Publications Ltd, Vol. 710. p. 275-280 6 p. (Key Engineering Materials; vol. 710).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Evaluating the electrode measurement sensitivity of subdermal electroencephalography electrodes

    Mendes, M. R., Subramaniyam, N. P. & Wendel-Mitoraj, K., 1 Jul 2015, International IEEE/EMBS Conference on Neural Engineering, NER. IEEE COMPUTER SOCIETY PRESS, Vol. 2015-July. p. 1092-1095 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Evaluation of parts of a boat cabin based on exergy - Focusing on environmental and economic assessments

    Medyna, G., Coatanea, E. & Millet, D., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. PARTS A AND B ed. AMER SOC MECHANICAL ENGINEERS, Vol. 4. p. 1083-1092 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Fabrication of soft devices with buried fluid channels by using sacrificial 3D printed molds

    Koivikko, A. & Sariola, V., 24 May 2019, 2019 2nd IEEE International Conference on Soft Robotics (RoboSoft). IEEE, p. 509-513 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Flux-Weakening Control for IPMSM Employing Model Order Reduction

    Far, M. F., Mustafa, B., Martin, F., Rasilo, P. & Belahcen, A., 24 Oct 2018, 2018 23rd International Conference on Electrical Machines, ICEM 2018. IEEE, p. 1510-1516 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    FORMI: A Fast Holonomic Path Planning and Obstacle Representation Method Based on Interval Analysis

    Mäenpää, P., Aref, M. M. & Mattila, J., 1 Nov 2019, Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems and Robotics, Automation and Mechatronics, CIS and RAM 2019. IEEE, p. 398-403 6 p. (IEEE International Conference on Cybernetics and Intelligent Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Framework and feasibility study for pairwise comparison tool

    Ellman, A., Wendrich, R. & Tiainen, T., 21 Aug 2016, Proceedings of the ASME 2016 Computers and Information in Engineering Conference IDETC/CIE 2016. Charlotte, North Carolina: ASME, 7 p. DETC2016-59886

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Graph based representation and analyses for conceptual stages

    Coatanéa, E., Nonsiri, S., Christophe, F. & Mokammel, F., 2014, 34th Computers and Information in Engineering Conference. The American Society of Mechanical Engineers ASME, Vol. 1A.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Heat Transfer of Impinging Jet: Effect of Compressibility and Turbulent Kinetic Energy Production

    Mikkonen, A. & Karvinen, R., 2017, IX International Conference on Computational Heat and Mass Transfer (ICCHMT 2016) .

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    High Temperature Tension HSB Device Based on Direct Electrical Heating

    Hokka, M., Östman, K., Rämö, J. & Kuokkala, V. T., 2015, Dynamic Behavior of Materials, Volume 1: Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics. Song, B., Casem, D. & Kimberley, J. (eds.). Springer, Vol. 65. p. 227-233 7 p. (Conference Proceedings of the Society for Experimental Mechanics Series).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Improving the effect of a nanoscale barrier coating on BOPP film properties by surface pretreatments

    Lahtinen, K., Lahti, J., Johansson, P., Seppänen, T. & Cameron, D. C., 2013, 14th European PLACE Conference 2013. TAPPI Press, Vol. 1. p. 469-493 25 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Improving the effect of nanoscale barrier coating on BOPP film properties: Influence of substrate contamination, web handling and pretreatments

    Lahti, J., Johansson, P., Lahtinen, K., Cameron, D. C. & Seppänen, T., 2014, TAPPI PLACE Conference 2014. TAPPI Press, Vol. 2. p. 1039-1061 23 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Inertial Sensor-Based State Estimation of Flexible Links Subject to Bending and Torsion

    Mäkinen, P., Mononen, T. & Mattila, J., 27 Aug 2018, 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018. IEEE, 8 p. 8449188

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Introducing Multi-Convexity in Path Constrained Trajectory Optimization for Mobile Manipulators

    Singh, A. K., Ahonen, A., Ghabcheloo, R. & Mueller, A., 2020, European Control Conference 2020, ECC 2020. IEEE, p. 1178-1185 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Knowledge-based artificial neural network (KB-ANN) in engineering: Associating functional architecture modeling, dimensional analysis and causal graphs to produce optimized topologies for KB-ANNs

    Coatanéa, E., Wu, D., Tsarkov, V., Gary Wang, G., Modi, S. & Jafarian, H., 2018, 38th Computers and Information in Engineering Conference. The American Society of Mechanical Engineers ASME, Vol. 1B-2018. 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Locomotion of light-driven soft microrobots through a hydrogel via local melting

    Palagi, S., Mark, A. G., Melde, K., Qiu, T., Zeng, H., Parmeggiani, C., Martella, D., Wiersma, D. S. & Fischer, P., 3 Aug 2017, International Conference on Manipulation, Automation and Robotics at Small Scales, MARSS 2017 - Proceedings. IEEE

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Market implementation of active and intelligent packaging-opportunities from a socio-economic perspective

    Lahti, J., 2019, 17th Biennial TAPPI European PLACE Conference 2019. TAPPI Press, p. 419-427 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Materials for electronics by thermal spraying

    Ronkainen, H., Kanerva, U., Varis, T., Ruusuvuori, K., Turunen, E., Peräntie, J., Putaala, J., Juuti, J. & Jantunen, H., 2013, Physical and Numerical Simulation of Materials Processing VII. Vol. 762. p. 451-456 6 p. (Materials Science Forum; vol. 762).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Measurements and Modeling of Frost Depth in Railway Tracks

    Pylkkänen, K., Nurmikolu, A., Guthrie, W. S. & Argyle, H. M., 2015, Proceedings of the International Conference on Cold Regions Engineering: 16th International Conference on Cold Regions Engineering 2015. American Society of Civil Engineers ASCE, p. 123-134 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Measurement theory and dimensional analysis: Methodological impact on the comparison and evaluation process

    Coatanéa, E., Yannou, B., Honkala, S., Lajunen, A., Saarelainen, T. & Makkonen, P., 2008, 19th International Conference on Design Theory and Methodology and 1st International Conference on Micro and Nano Systems, presented at - 2007 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2007. AMER SOC MECHANICAL ENGINEERS, p. 173-182 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    M-Estimator Application in Real-Time Sensor Fusion for Smooth Position Feedback of Heavy-Duty Field Robots

    Liikanen, H., Aref, M. M. & Mattila, J., 2019, Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems (CIS) and IEEE Conference on Robotics, Automation and Mechatronics (RAM). IEEE, p. 368-373 6 p. (IEEE International Conference on Cybernetics and Intelligent Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Modeling of steels and steel surfaces using quantum mechanical first principles methods

    Alatalo, M., Pitkänen, H., Ropo, M., Kokko, K. & Vitos, L., 2013, Physical and Numerical Simulation of Materials Processing VII. Vol. 762. p. 445-450 6 p. (Materials Science Forum; vol. 762).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Model Order Reduction of Bearingless Reluctance Motor Including Eccentricity

    Far, M. F., Mukherjee, V., Martin, F., Rasilo, P. & Belahcen, A., 24 Oct 2018, 2018 23rd International Conference on Electrical Machines, ICEM 2018. IEEE, p. 2243-2249 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Moving Web and Dynamic Problem of Aerothermoelastic Vibrations and Instability

    Banichuk, N., Ivanova, S. & Jeronen, J., 2020, Advanced Problems in Mechanics: Proceedings of the 47th International Summer School-Conference on Advanced Problems in Mechanics, APM 2019. Indeitsev, D. A. & Krivtsov, A. M. (eds.). Springer, p. 66-71 6 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Nanocellulose and Polylactic Acid Based Multilayer Coatings for Barrier Applications

    Lahti, J., 2019, 17th Biennial TAPPI European PLACE Conference 2019. TAPPI Press, p. 446-455 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Nanoparticle deposition on packaging materials by the liquid flame spray

    Teisala, H., Tuominen, M., Aromaa, M., Mäkelä, J. M., Stepien, M., Saarinen, J. J., Toivakka, M. & Kuusipalo, J., 2011, 13th European PLACE Conference 2011. Vol. 1. 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Nanoscale barrier coating on BOPP packaging film by ALD

    Lahti, J., 2016, TAPPI PLACE Conference 2016: Exploring New Frontiers. TAPPI Press, p. 493-505 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    Novel bio-based materials for active and intelligent packaging

    Lahti, J., Kamppuri, T. & Kuusipalo, J., 1 Jan 2017, 16th TAPPI European PLACE Conference 2017. TAPPI Press, 1 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  52. Published

    Novel equipment to simulate hot air heat sealability of packaging materials

    Lahti, J., Kuusipalo, J. & Auvinen, S., 1 Jan 2017, 16th TAPPI European PLACE Conference 2017. TAPPI Press, p. 237-248 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  53. Published

    On the threshold based neuronal spike detection, and an objective criterion for setting the threshold

    Tanskanen, J. M. A., Kapucu, F. E. & Hyttinen, J. A. K., 1 Jul 2015, International IEEE/EMBS Conference on Neural Engineering, NER. IEEE COMPUTER SOCIETY PRESS, p. 1016-1019 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  54. Published

    Operating point dependent variable switching point predictive current control for PMSM drives

    Wendel, S., Karamanakos, P., Dietz, A. & Kennel, R., 1 May 2019, PRECEDE 2019: 2019 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics. IEEE, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  55. Published

    Pneumatically actuated elastomeric device for simultaneous mechanobiological studies & live-cell fluorescent microscopy

    Kreutzer, J., Viehrig, M., Maki, A-J., Kallio, P., Rahikainen, R. & Hytönen, V., 3 Aug 2017, International Conference on Manipulation, Automation and Robotics at Small Scales, MARSS 2017 - Proceedings. IEEE

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  56. Published

    Position Estimation for Drones based on Visual SLAM and IMU in GPS-denied Environment

    Motlagh, H. D. K., Lotfi, F., Taghirad, H. D. & Germi, S. B., 1 Nov 2019, ICRoM 2019 - 7th International Conference on Robotics and Mechatronics. IEEE, p. 120-124 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  57. Published

    Real-time and Robust Collaborative Robot Motion Control with Microsoft Kinect ® v2

    Teke, B., Lanz, M., Kämäräinen, J-K. & Hietanen, A., 27 Aug 2018, 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018. IEEE, 6 p. 8449156

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  58. Published

    Recurrence network analysis of wide band oscillations of local field potentials from the primary motor cortex reveals rich dynamics.

    Subramaniyam, N. P., Hyttinen, J., Hatsopoulos, N. G. & Takahashi, K., 1 Jul 2015, International IEEE/EMBS Conference on Neural Engineering, NER. IEEE COMPUTER SOCIETY PRESS, p. 960-963 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  59. Published

    Redundant robotic manipulator path planning for real-time obstacle and self-collision avoidance

    Kivelä, T., Mattila, J., Puura, J. & Launis, S., 21 Jun 2017, Advances in Service and Industrial Robotics: Proceedings of the 26th International Conference on Robotics in Alpe-Adria-Danube Region, RAAD 2017. Ferraresi, C. & Quaglia, G. (eds.). Springer International Publishing, p. 208-216 9 p. (Mechanisms and Machine Science; vol. 49).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  60. Published

    Resilient Cooperative Voltage Control for Distribution Network with High Penetration Distributed Energy Resources

    Gusrialdi, A., Xu, Y., Qu, Z. & Simaan, M. A., 2020, European Control Conference 2020, ECC 2020. IEEE, p. 1533-1539 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  61. Published

    Role-based visualization of industrial IoT-based systems

    Mahmoodpour, M., Lobov, A., Lanz, M., Mäkelä, P. & Rundas, N., 27 Aug 2018, 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018. IEEE, 8 p. 8449183

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  62. Published

    Roll-to-roll coating by liquid flame spray nanoparticle deposition

    Mäkelä, J. M., Haapanen, J., Aromaa, M., Teisala, H., Tuominen, M., Stepien, M., Saarinen, J. J., Toivakka, M. & Kuusipalo, J., 2015, Materials Research Society Symposium Proceedings. MATERIALS RESEARCH SOCIETY, Vol. 1747. p. 37-42 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  63. Published

    Semantic analysis of function-solution duality

    Christophe, F., Ritola, T., Coatanéa, E. & Bernard, A., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. Vol. 3. p. 611-619 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  64. Published

    Solar Panel Breakage During Heavy Rain Caused by Thermal Stress

    Mikkonen, A. & Karvinen, R., Oct 2016, Engineered Transparency 2016: Glass in Architechture and Structural Engineering. Wiley

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  65. Published

    Statistical modeling of water vapor transmission rates for extrusion-coated papers

    Lahtinen, K. & Kuusipalo, J., 2008, TAPPI 2008 PLACE Conference: Innovations in Flexible Consumer Packaging.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  66. Published

    Structures and properties of laser-assisted cold-sprayed aluminum coatings

    Koivuluoto, H., Milanti, A., Bolelli, G., Latokartano, J., Marra, F., Pulci, G., Vihinen, J., Lusvarghi, L. & Vuoristo, P., 2017, THERMEC 2016. Trans Tech Publications Ltd, Vol. 879. p. 984-989 6 p. (Materials Science Forum; vol. 879).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  67. Published

    Tampere University of Technology, laboratory of materials science, paper converting and packaging technology Tampere, Finland

    Kuusipalo, J. & Lahti, J., 1 Jan 2017, 16th TAPPI European PLACE Conference 2017: Basel; Switzerland; 22 May 2017 through 24 May 2017. TAPPI Press, Vol. May-2017. 1 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  68. Published

    The effects of corona and flame treatment: Part 2. PE-HD and PP coated papers

    Lahti, J., Tuominen, M., Penttinen, T., Räsänen, J. P. & Kuusipalo, J., 2009, TAPPI Press - 12th European PLACE Conference 2009. Vol. 1. p. 278-314 37 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  69. Published

    Towards an approach for evaluating the quality of requirements

    Mokammel, F., Coatanea, E., Christophe, F., Ba Khouya, M. & Medyna, G., 2013, 33rd Computers and Information in Engineering Conference. American Society of Mechanical Engineers, Vol. 2 B. V02BT02A024

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  70. Conference contribution › Scientific › Not peer-reviewed
  71. Published

    Simulating the Drag Coefficient of a Spherical Autonomous Underwater Vehicle

    Heininen, A., Aaltonen, J. & Koskinen, K. T., 9 Oct 2017, Proceedings of the 2nd Annual SMACC Research Seminar 2017. Aaltonen, J., Virkkunen, R., Koskinen, K. T. & Kuivanen, R. (eds.). Tampere: Tampere University of Technology, Vol. 2. p. 53-56 4 p. 14

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  72. Chapter › Scientific › Peer-reviewed
  73. Published

    Enablers and barriers of smart data-based asset management services in industrial business networks

    Ahonen, T., Hanski, J., Hyvärinen, M., Kortelainen, H., Uusitalo, T., Vainio, H., Kunttu, S. & Koskinen, K., 2019, Lecture Notes in Mechanical Engineering. Pleiades Publishing, p. 51-60 10 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  74. Published

    Towards dependable automation

    Seppälä, J. & Salmenperä, M., 2015, Cyber Security: Analytics, Technology and Automation: Part IV. Springer International Publishing, p. 229-249 21 p. (Intelligent Systems, Control and Automation: Science and Engineering; vol. 78).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  75. Special issue › Scientific › Peer-reviewed
  76. Published

    Special Issue: From Responsive Materials to Interactive Materials

    Priimägi, A. (ed.) & Hecht, S. (ed.), 2020, In : Advanced Materials. 32, 20

    Research output: Contribution to journalSpecial issueScientificpeer-review

  77. Editorial › Scientific › Not peer-reviewed
  78. Published

    From Responsive Molecules to Interactive Materials

    Priimägi, A. (ed.) & Hecht, S. (ed.), 2020, In : Advanced Materials. 32, 20, 3 p., 2000215.

    Research output: Contribution to journalEditorialScientific

  79. Review Article › Scientific › Peer-reviewed
  80. Published

    Superhydrophobic Coatings on Cellulose-Based Materials: Fabrication, Properties, and Applications

    Teisala, H., Tuominen, M. & Kuusipalo, J., 1 Feb 2014, In : Advanced Materials Interfaces. 1, 1, p. 1-20 20 p., 1300026.

    Research output: Contribution to journalReview ArticleScientificpeer-review

  81. Published

    Waves in hyperbolic and double negative metamaterials including rogues and solitons

    Boardman, A. D., Alberucci, A., Assanto, G., Grimalsky, V. V., Kibler, B., McNiff, J., Nefedov, I. S., Rapoport, Y. G. & Valagiannopoulos, C. A., 9 Oct 2017, In : Nanotechnology. 28, 44, 444001.

    Research output: Contribution to journalReview ArticleScientificpeer-review

  82. Article › Scientific › Peer-reviewed
  83. Published

    A comparison of five optical surface topography measurement methods

    Mettänen, M. & Hirn, U., 1 Jan 2015, In : TAPPI Journal. 14, 1, p. 27-38 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  84. Published

    A comparison of relative displacement fields between numerical predictions and experimental results in fretting contact

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 1 Oct 2016, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 230, 10, p. 1273-1287 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  85. Published

    Adaptive and nonlinear control of discharge pressure for variable displacement axial piston pumps

    Koivumäki, J. & Mattila, J., 1 Oct 2017, In : Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME. 139, 10, 101008.

    Research output: Contribution to journalArticleScientificpeer-review

  86. Published

    A fractional representation approach to the robust regulation problem for SISO systems

    Laakkonen, P. & Quadrat, A., 1 May 2017, In : Systems and Control Letters. 103, p. 32-37 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  87. Published

    Analysing traffic fluency from bus data

    Syrjärinne, P., Nummenmaa, J., Thanisch, P., Kerminen, R. & Hakulinen, E., 1 Aug 2015, In : IET Intelligent Transport Systems. 9, 6, p. 566-572 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  88. Published

    Analysis of common rail pressure signal of dual-fuel large industrial engine for identification of injection duration of pilot diesel injectors

    Krogerus, T., Hyvönen, M. & Huhtala, K., Mar 2018, In : Fuel. 216, p. 1-9

    Research output: Contribution to journalArticleScientificpeer-review

  89. Published

    Analysis of thermo-active pile structures and their performance under groundwater flow conditions

    Gashti, E. H. N., Malaska, M. & Kujala, K., 11 Aug 2015, In : Energy and Buildings. 105, p. 1-8 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  90. Published

    An Artificial Nocturnal Flower via Humidity-Gated Photoactuation in Liquid Crystal Networks

    Wani, O. M., Verpaalen, R., Zeng, H., Priimagi, A. & Schenning, A. P. H. J., Jan 2019, In : Advanced Materials. 31, 2, 1805985.

    Research output: Contribution to journalArticleScientificpeer-review

  91. Published

    A near-infrared optoelectronic approach to detection of road conditions

    Colace, L., Santoni, F. & Assanto, G., May 2013, In : Optics and Lasers in Engineering. 51, 5, p. 633-636 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  92. Published

    An exploratory study on strengthening and thermal stability of magnetron sputtered W nanoparticles at the interface of Cu/Ni multilayer films

    Schoeppner, R. L., Mohanty, G., Polyakov, M. N., Petho, L., Maeder, X. & Michler, J., 2020, In : Materials and Design. 195, 9 p., 108907.

    Research output: Contribution to journalArticleScientificpeer-review

  93. Assessing population vulnerability towards summer energy poverty: Case studies of Madrid and London

    Sanchez-Guevara, C., Núñez Peiró, M., Taylor, J., Mavrogianni, A. & Neila González, J., 1 May 2019, In : Energy and Buildings. 190, p. 132-143 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  94. Published

    Assessment of pitting corrosion in bare and passivated (wet scCO2-induced patination and chemical passivation) hot-dip galvanized steel samples with SVET, FTIR, and SEM (EDS)

    Saarimaa, V., Fuertes, N., Persson, D., Zavalis, T., Kaleva, A., Nikkanen, J-P., Levänen, E. & Heydari, G., 2020, In : Materials and Corrosion. 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  95. Published

    Asymptotics and approximation of large systems of ordinary differential equations

    Paunonen, L. & Seifert, D., 2020, In : Systems and Control Letters. 140, 9 p., 104703.

    Research output: Contribution to journalArticleScientificpeer-review

  96. E-pub ahead of print

    A TOpti simulation for finding fuel saving by optimising propulsion control and power management

    Jaurola, M., Hedin, A., Tikkanen, S. & Huhtala, K., 2019, In : Journal of Marine Science and Technology (Japan).

    Research output: Contribution to journalArticleScientificpeer-review

  97. Published

    Avoiding the high friction peak in fretting contact

    Juoksukangas, J., Hintikka, J., Lehtovaara, A., Mäntylä, A., Vaara, J. & Frondelius, T., 2020, In : Rakenteiden Mekaniikka. 53, 1, p. 12-19 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  98. Published

    Barkhausen noise response of three different welded duplex stainless steels

    Lindgren, M., Santa-aho, S. & Vippola, M., 1 Sep 2016, In : Insight. 58, 9, p. 480-486 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  99. Published

    Behaviour of leaded tin bronze in simulated seawater in the absence and presence of tribological contact with alumina counterbody: Corrosion, wear and tribocorrosion

    Huttunen-Saarivirta, E., Isotahdon, E., Metsäjoki, J., Salminen, T., Ronkainen, H. & Carpén, L., 2019, In : Tribology International. 129, p. 257-271 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  100. Published

    Bioactive glass ions induce efficient osteogenic differentiation of human adipose stem cells encapsulated in gellan gum and collagen type I hydrogels

    Vuornos, K., Ojansivu, M., Koivisto, J. T., Häkkänen, H., Belay, B., Montonen, T., Huhtala, H., Kääriäinen, M., Hupa, L., Kellomäki, M., Hyttinen, J., Ihalainen, J. A. & Miettinen, S., 1 Jun 2019, In : Materials Science and Engineering C. 99, p. 905-918 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  101. Published

    CFD modeling the diffusional losses of nanocluster-sized particles and condensing vapors in 90° bends of circular tubes

    Olin, M. & Dal Maso, M., 2020, In : Journal of Aerosol Science. 150, 10 p., 105618.

    Research output: Contribution to journalArticleScientificpeer-review

  102. Published

    Characterization of cracks formed in large flat-on-flat fretting contact

    Juoksukangas, J., Nurmi, V., Hintikka, J., Vippola, M., Lehtovaara, A., Mäntylä, A., Vaara, J. & Frondelius, T., Jul 2019, In : International Journal of Fatigue. 124, p. 361-370 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  103. Published

    Characterization of the microstructure and corrosion performance of Ce-alloyed Nd-Fe-B magnets

    Isotahdon, E., Huttunen-Saarivirta, E. & Kuokkala, V., Jan 2017, In : Journal of Alloys and Compounds. 692, p. 190-197

    Research output: Contribution to journalArticleScientificpeer-review

  104. Chemically tailored dielectric-to-metal transition for the design of metamaterials from nanoimprinted colloidal nanocrystals

    Fafarman, A. T., Hong, S. H., Caglayan, H., Ye, X., Diroll, B. T., Paik, T., Engheta, N., Murray, C. B. & Kagan, C. R., 13 Feb 2013, In : Nano Letters. 13, 2, p. 350-357 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  105. Published

    Chemical synthesis of WC-Co from water-soluble precursors: The effect of carbon and cobalt additions to WC synthesis

    Kanerva, U., Karhu, M., Lagerbom, J., Kronlöf, A., Honkanen, M., Turunen, E. & Laitinen, T., 1 Apr 2016, In : International Journal of Refractory Metals and Hard Materials. 56, p. 69-75 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  106. Published

    Chip-by-chip configurable interconnection using digital printing techniques

    Mashayekhi, M., Winchester, L., Laurila, M-M., Mäntysalo, M., Ogier, S., Terés, L. & Carrabina, J., 6 Mar 2017, In : Journal of Micromechanics and Microengineering. 27, 4, 045009.

    Research output: Contribution to journalArticleScientificpeer-review

  107. Published

    Circular dichroism in the second harmonic field evidenced by asymmetric AU coated gaas nanowires

    Belardini, A., Leahu, G., Petronijevic, E., Hakkarainen, T., Koivusalo, E., Piton, M. R., Talmila, S., Guina, M. & Sibilia, C., 1 Feb 2020, In : Micromachines. 11, 2, p. 1-8 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  108. Published

    Co-electrospun blends of PU and PEG as potential biocompatible scaffolds for small-diameter vascular tissue engineering

    Wang, H., Feng, Y., Fang, Z., Yuan, W. & Khan, M., 1 Dec 2012, In : Materials Science and Engineering C: Materials for Biological Applications. 32, 8, p. 2306-2315 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  109. Published

    Comparative environmental impacts of additive and subtractive manufacturing technologies

    Paris, H., Mokhtarian, H., Coatanéa, E., Museau, M. & Ituarte, I. F., 2016, In : CIRP Annals: Manufacturing Technology. 65, 1, p. 29-32

    Research output: Contribution to journalArticleScientificpeer-review

  110. Published

    Computational design of a novel medium-carbon, low-alloy steel microalloyed with niobium

    Javaheri, V., Nyyssönen, T., Grande, B. & Porter, D., Jun 2018, In : Journal of Materials Engineering and Performance. 27, 6, p. 2978-2992 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  111. Published

    Concepts, methods and tools for individualized production

    Lanz, M. & Tuokko, R., 1 Apr 2017, In : PRODUCTION ENGINEERING. 11, 2, p. 205-212 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  112. Published

    Conductivity control via minimally invasive anti-Frenkel defects in a functional oxide

    Evans, D. M., Holstad, T. S., Mosberg, A. B., Småbråten, D. R., Vullum, P. E., Dadlani, A. L., Shapovalov, K., Yan, Z., Bourret, E., Gao, D., Akola, J., Torgersen, J., van Helvoort, A. T. J., Selbach, S. M. & Meier, D., 2020, In : Nature Materials. 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  113. Published

    Conjugated Heat Transfer Simulation of a Fin-and-Tube Heat Exchanger

    Välikangas, T. & Karvinen, R., 2018, In : Heat Transfer Engineering. 39, 13-14, p. 1192-1200 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  114. Published

    Consideration of energy consumption, energy costs, and space occupancy in Finnish daycare centres and school buildings

    Sekki, T., Andelin, M., Airaksinen, M. & Saari, A., 1 Oct 2016, In : Energy and Buildings. 129, p. 199-206 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  115. Published

    Controlling liquid spreading using microfabricated undercut edges

    Liimatainen, V., Sariola, V. & Zhou, Q., 24 Apr 2013, In : Advanced Materials. 25, 16, p. 2275-2278 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  116. Published

    Corrosion mechanisms of sintered Nd-Fe-B magnets in the presence of water as vapour, pressurised vapour and liquid

    Isotahdon, E., Huttunen-Saarivirta, E., Heinonen, S., Kuokkala, V. T. & Paju, M., 25 Mar 2015, In : Journal of Alloys and Compounds. 626, p. 349-359 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  117. Published

    Cost optimal and nearly zero (nZEB) energy performance calculations for residential buildings with REHVA definition for nZEB national implementation

    Kurnitski, J., Saari, A., Kalamees, T., Vuolle, M., Niemelä, J. & Tark, T., Nov 2011, In : Energy and Buildings. 43, 11, p. 3279-3288 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  118. Published

    Defined-size DNA triple crossover construct for molecular electronics: Modification, positioning and conductance properties

    Linko, V., Leppiniemi, J., Paasonen, S. T., Hytönen, V. P. & Jussi Toppari, J., 8 Jul 2011, In : Nanotechnology. 22, 27, 275610.

    Research output: Contribution to journalArticleScientificpeer-review

  119. Published

    Democratizing composites manufacturing -inexpensive tooling empowers new players

    Antin, K. N. & Pärnänen, T., 1 Jul 2017, In : SAMPE Journal. 53, 4, p. 6-10 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  120. E-pub ahead of print

    Deposition of dry particles on a fin-and-tube heat exchanger by a coupled soft-sphere DEM and CFD

    Välikangas, T., Hærvig, J., Kuuluvainen, H., Dal Maso, M., Peltonen, P. & Vuorinen, V., 2019, In : International Journal of Heat and Mass Transfer. 19 p., 119046.

    Research output: Contribution to journalArticleScientificpeer-review

  121. Published

    Detection beyond Debye's length with an electrolyte-gated organic field-effect transistor

    Palazzo, G., De Tullio, D., Magliulo, M., Mallardi, A., Intranuovo, F., Mulla, M. Y., Favia, P., Vikholm-Lundin, I. & Torsi, L., 2015, In : Advanced Materials. 27, 5, p. 911-916 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  122. E-pub ahead of print

    Detection of gaseous species during KCl-induced high-temperature corrosion by the means of CPFAAS and CI-APi-TOF

    Lehmusto, J., Olin, M., Viljanen, J., Kalliokoski, J., Mylläri, F., Toivonen, J., Dal Maso, M. & Hupa, L., 30 Aug 2019, In : Materials and Corrosion. 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  123. Published

    Development of expanded graphite filled natural rubber vulcanizates in presence and absence of carbon black: Mechanical, thermal and morphological properties

    Malas, A., Das, C. K., Das, A. & Heinrich, G., 2012, In : Materials and Design. 39, p. 410-417 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  124. Published

    Differential basal-to-apical accessibility of lamin A/C epitopes in the nuclear lamina regulated by changes in cytoskeletal tension

    Ihalainen, T. O., Aires, L., Herzog, F. A., Schwartlander, R., Moeller, J. & Vogel, V., 1 Dec 2015, In : Nature Materials. 14, 12, p. 1252-1261 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  125. Published

    Digital hydraulic multi-pressure actuator – the concept, simulation study and first experimental results

    Huova, M., Aalto, A., Linjama, M., Huhtala, K., Lantela, T. & Pietola, M., 2017, In : International Journal of Fluid Power. 18, 3, p. 141-152 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  126. E-pub ahead of print

    Dissolution, bioactivity and osteogenic properties of composites based on polymer and silicate or borosilicate bioactive glass

    Houaoui, A., Lyyra, I., Agniel, R., Pauthe, E., Massera, J. & Boissière, M., 2019, In : Materials Science and Engineering C. 107, 110340.

    Research output: Contribution to journalArticleScientificpeer-review

  127. Published

    Divertor remote handling for DEMO: Concept design and preliminary FMECA studies

    Carfora, D., Di Gironimo, G., Järvenpää, J., Huhtala, K., Määttä, T. & Siuko, M., 9 Jul 2015, In : Fusion Engineering and Design. 98-99, p. 1437-1441 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  128. Published

    Do properties of bioactive glasses exhibit mixed alkali behavior?

    Wang, X., Fagerlund, S., Massera, J., Södergård, B. & Hupa, L., 2017, In : Journal of Materials Science. 52, 15, p. 8986–8997 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  129. Published

    Dynamic speckle analysis with smoothed intensity-based activity maps

    Stoykova, E., Berberova, N., Kim, Y., Nazarova, D., Ivanov, B., Gotchev, A., Hong, J. & Kang, H., 1 Jun 2017, In : Optics and Lasers in Engineering. 93, p. 55-65 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  130. Published

    Effect of energy measures on the values of energy efficiency indicators in Finnish daycare and school buildings

    Sekki, T., Airaksinen, M. & Saari, A., 15 Mar 2017, In : Energy and Buildings. 139, p. 124-132 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  131. Published

    Effect of finish rolling and quench stop temperatures on impact-abrasive wear resistance of 0.35 % carbon direct-quenched steel

    Haiko, O., Miettunen, I., Porter, D., Ojala, N., Ratia, V., Heino, V. & Kemppainen, A., 2017, In : Tribologia. 35, 1-2, p. 5-21 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  132. Published