Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. D4 Published development or research report or study
  2. Published

    Betonin ajasta riippumattomat materiaalimallit

    Kouhia, R., 2013, Unknown Publisher. 83 p. (Liikenneviraston tutkimuksia ja selvityksiä; no. 38)

    Research output: Book/ReportCommissioned reportProfessional

  3. Published

    Virtuaalinen konelaboratorio ja semanttinen mallinnus konejärjestelmän suunnittelun tukena, Loppuraportti, Semogen II -hanke

    Nykänen, O., Koskinen, K. T., Ranta, P., Salonen, J., Aaltonen, J., Nurmi, J., Helminen, M., Alarotu, V., Salomaa, T. & Pohjolainen, S., 2013, Tampere: Tampereen teknillinen yliopisto, Smart Simulators -tutkimusryhmä. 50 p.

    Research output: Book/ReportCommissioned reportProfessional

  4. Published

    Talotekniikka

    Kalema, T. & Joutsi, J., 2013, Tampere: Tampereen teknillinen yliopisto. 6 p. (Tampereen teknillinen yliopisto. Rakennustekniikan laitos. Rakennustuotanto ja -talous. Raportti; vol. 14)

    Research output: Book/ReportCommissioned reportProfessional

  5. Published

    Käyttövarmuustiedon hallinta ja hyödyntäminen suunnittelussa

    Franssila, H., Kunttu, S., Saarinen, H. & Valkokari, P., 2012, Espoo: VALTION TEKNILLINEN TUTKIMUSKESKUS. 47 p. (VTT Technology; vol. 48)

    Research output: Book/ReportCommissioned reportProfessional

  6. Published

    Micro and Desktop Factory Roadmap

    Tuokko, R., Heikkilä, R., Järvenpää, E., Nurmi, A., Prusi, T., Siltala, N. & Vuola, A., 2012, Tampere: Tampere University of Technology. Department of Production Engineering. 112 p.

    Research output: Book/ReportCommissioned reportProfessional

  7. Published

    Käyttövarmuuden hallinta - standardista käytäntöön

    Ahonen, T., Jännes, J., Kunttu, S., Valkokari, P., Venho-Ahonen, O., Välisalo, T., Ellman, A., Hietala, J-P., Multanen, P., Mäkiranta, A., Saarinen, H. & Franssila, H., 2012, Espoo: VALTION TEKNILLINEN TUTKIMUSKESKUS. 73 p. (VTT Technology; vol. 69)

    Research output: Book/ReportCommissioned reportProfessional

  8. Published

    EFDA goal oriented training in remote handling - GOTRH

    Mattila, J., Alho, P., Väyrynen, J., Sibois, R. & Salminen, K., 2012, VALTION TEKNILLINEN TUTKIMUSKESKUS. 3 p. (VTT Science; vol. 7)

    Research output: Book/ReportCommissioned reportProfessional

  9. Published

    Käyttövarmuussuunnittelun kehittämistarpeet

    Valkokari, P., Ahonen, T., Franssila, H., Itäsalo, A., Jännes, J., Välisalo, T. & Ellman, A., 2012, Espoo: VALTION TEKNILLINEN TUTKIMUSKESKUS. 52 p. (VTT Working Papers; vol. 180)

    Research output: Book/ReportCommissioned reportProfessional

  10. Published

    Vaikuttavaa tutkimusta tavoitteellisella verkostotoiminnalla, Matine strategia 2018

    Riitahuhta, A. & Appelqvist, P., 2012, Helsinki: Maanpuolustuksen tieteellinen neuvottelukunta MATINE. 25 p.

    Research output: Book/ReportCommissioned reportProfessional

  11. Published

    Divertor RH design updates and DTP2 Phase 2 testing

    Siuko, M., Järvenpää, J. & Mattila, J., 2012, VALTION TEKNILLINEN TUTKIMUSKESKUS. 8 p. (VTT Science; vol. 7)

    Research output: Book/ReportCommissioned reportProfessional

  12. Published

    2008-2010 Host Activities Related to DTP2 Test Facility Operation and Upgrade Preparation

    Siuko, M., Järvenpää, J. & Mattila, J., 2011, Valtion teknillinen tutkimuslaitos. 11 p. (VTT Publications; vol. 764)

    Research output: Book/ReportCommissioned reportProfessional

  13. Published

    Divertor RH design updates and DTP2 Phase 2 testing

    Siuko, M., Järvenpää, J. & Mattila, J., 2011, Espoo: VTT. 6 p. (VTT Publications; vol. 764)

    Research output: Book/ReportCommissioned reportProfessional

  14. Published

    Multicriterion Compliance Minimization and Stress-constrained Minimum Weight Design of a Three-bar Truss

    Mela, K., 2011, Tampere University of Technology. 40 p. (Tampere University of Technology, Department of Mechanics and Design. Research Report; vol. 2)

    Research output: Book/ReportCommissioned reportProfessional

  15. Published

    2008-2009 Host Activities Related to DTP2 Test Facility Operation and Upgrade Preparation

    Siuko, M., Järvenpää, J. & Mattila, J., 2010, VTT. 12 p. (VTT Publications; vol. 738)

    Research output: Book/ReportCommissioned reportProfessional

  16. Published

    SISU 2010 - Uusi tuotantoajattelu, Tekes-ohjelman loppuraportti

    Tuokko, R., Majuri, M. & Suuronen, J., 2010, Unknown Publisher. 247 p. (Tekesin ohjelmaraportti; vol. 1/2010)

    Research output: Book/ReportCommissioned reportProfessional

  17. Published

    Oxy-fuel combustion and flue gases recirculation: Apparatus development, measurements and model

    Rodriguez, M., 2009, Tampere: Unknown Publisher. 27 p. (Tampereen teknillinen yliopisto, Energia- ja prosessitekniikan laitos. Raportti; vol. 190)

    Research output: Book/ReportCommissioned reportProfessional

  18. Published

    2008-2009 Host Activities Related to DTP2 Test Facility Operation and Upgrade Preparation

    Siuko, M., Järvenpää, J. & Mattila, J., 2009, VTT. 10 p. (VTT Publications; vol. 709)

    Research output: Book/ReportCommissioned reportProfessional

  19. Published

    Implementation of a DTP2 safety system for testing, and final CMM/SCEE integration and commissioning

    Mattila, J. & Järvenpää, J., 2009, VTT. 3 p. (VTT Publications; vol. 709)

    Research output: Book/ReportCommissioned reportProfessional

  20. Published

    Host activities in connection with the DTP2 test facility

    Järvenpää, J., Timperi, A., Tuominen, R. & Mattila, J., 2008, Espoo: VTT. 5 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  21. Published

    Software development and modelling of the CMM system

    Mattila, J., 2008, Espoo: VTT. 2 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  22. Published

    Development of DTP2 subsystems and tooling in support of remote handling trials

    Mattila, J., 2008, Espoo: VTT. 7 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  23. Published

    Implementation of a DTP2 safety system for testing, and final CMM/SCEE integration and commissioning

    Mattila, J. & Järvenpää, J., 2008, Espoo: VTT. 3 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  24. Published

    EFDA quality assurance exercise

    Mattila, J. & Järvenpää, J., 2008, Espoo: VTT. 2 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  25. D3 Professional conference proceedings
  26. Published

    Improving tracking performance of composite nonlinear feedback controllers via new reset and hold feature of nonlinear functions

    Pyrhönen, V-P. & Vilkko, M., 15 May 2019, Automaatiopäivät 23: 15-16.5.2019 Oulu.. Juuso, E. (ed.). Oulu: Suomen Automaatioseura, 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  27. Published

    Robust and perfect tracking control of a DC servo motor

    Pyrhönen, V-P., 15 May 2019, Automaatiopäivät 23: 15-16.5.2019, Oulu. Juuso, E. (ed.). Oulu: Suomen Automaatioseura

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  28. Published

    Switching control of a water hydraulic cylinder with slow parallel-connected on/off valves

    Linjama, M., Grönholm, J. & Paloniitty, M., 28 Feb 2019, The 10th Workshop on Digital Fluid Power : February 28th-March 1st, 2019, Linz, Austria. Linz Center of Mechatronics, 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  29. Published

    Digital hydraulic multi-pressure actuators - simulation study of a forwarder crane

    Heikkilä, M., Huova, M. & Linjama, M., 28 Feb 2019, The 10th Workshop on Digital Fluid Power : February 28th - March 1st, 2019, Linz, Austria. Linz Center of Mechatronics, 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  30. Published

    Comportamiento Dinámico en Tracción a Alta Temperatura De Titanio Ensayado Por Dos Métodos Distintos

    Hueto, F., Sancho, R., Hokka, M. & Galvez, F., 2017, Grupo Español de Fractura.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  31. Published

    Digital Image Correlation as a Measurement Tool for Heart Surgery

    Hokka, M., 2017, Proceedings of the Annual Meeting of the International Digital Image Correlation Society, Barcelona.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  32. Published

    Identification of fundamental requirements for ideal metamodeling framework in additive manufacturing

    Mokhtarian, H., Coatanea, E., Paris, H. & Vihinen, J., 2017, Proceedings of the 2nd Annual SMACC Research Seminar 2017. Aaltonen, J., Virkkunen, R., Koskinen, K. T. & Kuivanen, R. (eds.). p. 29-31 3 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  33. Published

    Low-fidelity design analysis tool for early design phase

    Ellman, A., 10 Oct 2016, Proceedings of the 1st Annual SMACC Research Seminar 2016. p. 90-93 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  34. Published

    Toward Developing Surrogate Model Integrating Multi-physics, Multi-criteria Models for Additive Manufacturing Technologies

    Mokhtarian, H., Coatanea, E., Paris, H., Vihinen, J., Ikkala, K. & Kiviö, J., Oct 2016, Proceedings of the 1st Annual SMACC Research Seminar 2016. p. 40-42

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  35. Published

    Modeling of the Process Parameters Influencing Cold Metal Transfer (CMT): Development of an Approach Based in Causal Networks

    Välimäki, E., Mokhtarian, H., Vihinen, J. & Coatanea, E., Oct 2016, Proceedings of the 1st Annual SMACC Research Seminar 2016. p. 40-42. p. 56-59 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  36. Published

    Technical Cleanliness of Hose Assemblies in Fluid Power System

    Rinkinen, J., Huhturi, J. & Elo, L., 2 Jun 2016, 23rd International Conference on Hydraulics and Pneumatics, June 1 – 3, 2016, Prague, Czech Republic. 8 p. 2

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  37. Published

    Correlation of wear and work in dual pivoted jaw crusher tests

    Terva, J., Valtonen, K., Siitonen, P. & Kuokkala, V-T., Jun 2016, The 17th Nordic Symposium on Tribology - NORDTRIB 2016.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  38. Published

    High-Performance Digital Hydraulic Tracking Control of a Mobile Boom Mockup

    Linjama, M., Huova, M., Karhu, O. & Huhtala, K., Mar 2016, 10th International Fluid Power Conference (10. IFK) . Dresden, Vol. 1. 12 p. A-1

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  39. Published

    LeanMES Concept – An Approach to Manage Order-Delivery Information in a Production Network

    Järvenpää, E., Toivonen, V., Lanz, M. & Nieminen, H., 2016, Proceedings of the 26th International conference on Flexible Automation and Intelligent Manufacturing (FAIM2016). p. 988-995 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  40. Published

    Closing the Gap – Improving Production Control with a New Layer of Decision Making

    Toivonen, V., Järvenpää, E. & Lanz, M., 2016, Proceedings of the 26th International conference on Flexible Automation and Intelligent Manufacturing (FAIM2016). p. 1042-1049 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  41. Published

    The role of microstructure in high stress abrasion of white cast irons

    Heino, V., Kallio, M., Valtonen, K. & Kuokkala, V-T., 2016, The 17th Nordic Symposium on Tribology - NORDTRIB 2016 14th - 17th June 2016 Aulanko, Hämeenlinna, Finland.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  42. Published

    The effects of microstructure on erosive-abrasive wear behavior of carbide free bainitic and boron steels

    Vuorinen, E., Heino, V., Ojala, N., Haiko, O. & Hedayati, A., 2016, The 17th Nordic Symposium on Tribology - NORDTRIB 2016 14th - 17th June 2016 Aulanko, Hämeenlinna, Finland.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  43. Published

    Sensor-assisted Flexible Industrial Robot Workcell: A Case Study

    Halme, J., Changizi, A., Hietanen, A., Latokartano, J., Lanz, M., Kämäräinen, J. & Koskinen, K. T., 2016, Proceedings of the 1st Annual SMACC Research Seminar 2016. p. 61-64 4 p. 14

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  44. Published

    Characterization of the cutting parameters in comparison to the machine tool input power

    Ikkala, K., Kiviö, J., Mokhtarian, H. & Coatanea, E., 2016, 26th International Conference on Flexible Automation and Inteligent Manufacturing, FAIM 2016, KSTC Seoul.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  45. Published

    Modeling and Preliminary Design of Underwater Robot for Inspection

    Zavari, S., Salomaa, T., Koskinen, K., Villa Escusol, J. & Aaltonen, J., 2016, Proceedings of the 2nd Annual SMACC Research Seminar 2017. Tampere: Tampere University of Technology, p. 81-84 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  46. Published

    Digital image correlation method in hydro turbine shaft torque and vibration monitoring

    Saarenrinne, P., Miettinen, J., Ylönen, M. & Kokko, V., 27 Oct 2015, Proceedings of the Hydro 2015 Bordeaux 26-28 October 2015. Hydro Power & Dams, 8 p. 08.06

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  47. Published

    Productivity measurement at the factory level

    Paranko, J., Paranko, B. & Huhtala, P., 7 Oct 2015, TARC 2015 Trends in accounting research conference : With International PhD Colloquium and Workshop 7-9 th october 2015, Lodz, Poland. Lodz, Poland: University of Lodz, Poland, p. 1-25 25 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  48. Published

    Local oscillation of the boundary layer over the surface of swimming rainbow trout: implications for active drag reduction

    Saarenrinne, P. & Yanase, K., 15 Sep 2015, Proceedings of the 11TH International Symposium on Particle Image Velocimetry – PIV15 . 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  49. Published

    Compression model for radial compression of Norway spruce earlywood and latewood

    Moilanen, C., Björkqvist, T. & Saarenrinne, P., 19 May 2015, 9th International Mechanical Pulping Research Seminar. Trondheim, Norway

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  50. Published

    Using maintenance data for extended warranty simulation

    Mahlamäki, K., Jokinen, J., Borgman, J., Niemi, A. & Rämänen, J., 2015, COMADEM 2014, Implications of life cycle analysis in asset and maintenance management, 16-18 September 2014, Brisbane Convention and Exhibition Centre, Australia. 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  51. Published

    Two models for hydraulic cylinder

    Ylinen, A., Kouhia, R. & Mäkinen, J., 2015, 2nd International Conference on Multi-Scale Computational Methods for Solids and Fluids: ECCOMAS MSF 2015. Ibrahimbegović, A., Ademović, N., Ilić-Georgijević, E., Serdarević, A., Hrasnica, M. & Dolarević, S. (eds.). Sarajevo, p. 115-116 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  52. Published

    Improving Recovery Boiler Availability through Understanding Fume Behavior

    Leppänen, A. & Välimäki, E., 2015, TAPPI PEERS Conference Proceedings, October 25-28, 2015. Atlanta, Georgia: TAPPI, 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  53. Published

    Hydraulikomponenttien puhtausvalvontastandardien tilanne 2014

    Rinkinen, J., 2014, PAMAS 2014 Käyttäjäpäivä, 4.2.2014, Tampereen teknillinen yliopisto, Tampere. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). Tampere: Tampereen teknillinen yliopisto, p. 157-182 26 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  54. Published

    Implementing KPIs for energy performance assessment in brownfield districts

    Florea, A., Martinez Lastra, J. L., Marquez, J. A., Colino, A., Presser, M. & Larranaga, M., 2014, Sustainable Places, October 1-3, 2014, Nice, France. 21 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  55. Published

    Hydraulikomponenttien testipenkkistandardi ja mittaustuloksia

    Pekkonen, J., Elo, L., Kuosku, M. & Rinkinen, J., 2014, PAMAS 2014 Käyttäjäpäivä, 4.2.2014, Tampereen teknillinen yliopisto, Tampere. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). Tampere: Tampereen teknillinen yliopisto, p. 199-210 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  56. Published

    Automaattinen öljyn epäpuhtauksien mittaus ja keskeiset standardit

    Multanen, P., Niiranen, E., Elo, L. & Rinkinen, J., 2014, PAMAS 2014 Käyttäjäpäivä, 4.2.2014, Tampereen teknillinen yliopisto, Tampere. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). Tampere: Tampereen teknillinen yliopisto, p. 43-70 28 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  57. Published

    Kokemuksia inline- ja online-mittauksista - ISO/SAE -standardit

    Elo, L., Pekkonen, J. & Rinkinen, J., 2012, KompuNW -verkostoseminaari TTY:ssa 9.10.2012. Tampere: Tampere University of Technology, IHA - Department of Intelligent Hydraulics and Automation, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  58. Published

    IHA:n KompuNW-testipenkillä tehtyjä mittauksia

    Pekkonen, J., Elo, L., Kuosku, M. & Rinkinen, J., 2012, KompuNW -verkostoseminaari TTY:ssa 9.10.2012. Tampere: Tampere University of Technology, IHA - Department of Intelligent Hydraulics and Automation, p. 1-16 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  59. Published

    Mittaustuloksia kaupallisilla puhtaustestikaapeilla

    Kuosku, M., Pekkonen, J. & Rinkinen, J., 2012, KompuNW -verkostoseminaari TTY:ssa 9.10.2012. Tampere: Tampere University of Technology, IHA - Department of Intelligent Hydraulics and Automation, p. 1-15 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  60. Published

    Voiteluöljyn online- ja inline-kunnonvalvonta, "Uusia tapoja ja menetelmiä öljyn kunnon ja vaihtovälin määrittelemiseksi"

    Elo, L. & Rinkinen, J., 2012, Voiteluaineanalyysit mittaavan kunnossapidon työkaluna, AEL -seminaari 29.8.2012. Helsinki: Elinkeinoelämän koulutuspalvelut, p. 1-14 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  61. Published

    Komponentin ja järjestelmän elinkaaren mallintaminen analyyttisillä menetelmillä

    Aaltonen, J., 2012, Hydraulijärjestelmien modernisointi, 21.-22.3.2012, Suomen ilmailumuseo, Vantaa, Kunnossapitoyhdistys. Helsinki: Kunnossapitoyhdistys ProMaint, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  62. Published

    Koneiden vikaantumismekanismit

    Miettinen, J., 2011, Kuntoon perustuva kunnossapito ja kunnonvalvonta, 23.-24.11.2011, Tampere. Kunnossapitoyhdistys ProMaint, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  63. Published

    Värähtelymittauksen perusteet

    Miettinen, J., 2011, Kuntoon perustuva kunnossapito ja kunnonvalvonta, 23.-24.11.2011, Tampere. Kunnossapitoyhdistys ProMaint, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  64. Published

    Out of plane acturator concept and characterization of dielectric elastomer EAP materials

    Paajanen, M., Jouppila, V., Ellman, A., Bauer, S., Kofod, G., Karesoja, M. & Tenhu, H., 2006, Applied Material Research at VTT. VTT Symposium. Ritschkoff, A-C., Koskinen, J. & Paajanen, M. (eds.). p. 50-60

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  65. D2 Article in professional manuals or guides or professional information systems or text book material
  66. Published

    Suomalaiset ambulanssit

    Lehtonen, T., 2017, Suomi turvassa 100 vuotta. Mobilia säätiö, p. 36-45 10 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  67. Published

    Persistent Business Transformation with Product Knowledge and Lifecycle Management

    Pulkkinen, A. (ed.), Leino, S-P. (ed.) & Papinniemi, J. (ed.), Nov 2016, DIMECC MANU – Future Digital Manufacturing Final Report. Syrjälä, K. (ed.). 2016 ed. Tampere: Teknologiainfo Teknova, Vol. 10. (Dimecc Publications Series).

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  68. Published

    Pyörät ja pyssyt

    Kylliäinen, M., Partanen, S., Ojanen, O. J., Tikander, V., Katjamäki, T., Kortti, J., Piltz, M., Lempinen, O., Lehtonen, T., Lehtomäki, K. & Lilja, E., 2013, Kahdella pyörällä. Kirsi, L. (ed.). 246: Mobilia säätiö, p. 71-77

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  69. Published

    Project Data Sheet: Future models for digital and global extended enterprises (Fudge)

    Pulkkinen, A., 2012, Fimecc, GP4Variants, Final report. Tampere: FIMECC Oy, p. 9-10

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  70. Published

    Linja-autoliikennöitsijät ja tavaralinjaliikenne

    Lehtonen, T., 2011, Yölinjalla. Levä, K. (ed.). Mobilia, p. 58-65

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  71. Published

    Elävien kuvien linja-auto

    Lehtonen, T., 2010, Peltitähdet - Auto elokuvissa. Levä, K. (ed.). Kerava: Mobilia säätiö, p. 83-94

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  72. Published

    Formal methods in factory automation

    Popescu, C. & Martinez Lastra, J. L., 2010, Factory Automation. Silvestre-Blanes, J. (ed.). Croatia: In-Teh, p. 463-475

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  73. Published

    Kehittyneet kelausteknologiat automatisoituna 3D-komposiittikappaleiden valmistusmenetelmänä - 3D FiWi

    Vuorinen, J. & Ellman, A., 2010, SISU 2010 - uusi tuotantoajattelu: loppuraportti. Tekesin ohjelmaraportti. p. 94-98

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  74. D1 Article in a trade journal
  75. Published

    Robotit yhteiskunnan palveluksessa

    Halonen, E., 25 Apr 2018, In : Automaatioväylä. 2, p. 27 1 p.

    Research output: Contribution to journalArticleProfessional

  76. Published

    Levynmuovauksen teemapäivä - Steel forum 2017

    Minkkinen, A., Vuorio, T. & Peura, P., Apr 2018, In : Ohutlevy-lehti. 2018, 1, p. 13-16 4 p.

    Research output: Contribution to journalArticleProfessional

  77. Published

    Robotiikan turvallisuus ja standardit

    Lanz, M. & Järvenpää, E., Apr 2018, In : Automaatioväylä. 2, p. 29

    Research output: Contribution to journalArticleProfessional

  78. Published

    Robottien tulevaisuus: seuralaisia ja uusia ideoita

    Lanz, M. & Järvenpää, E., Apr 2018, In : Automaatioväylä. 2, p. 30

    Research output: Contribution to journalArticleProfessional

  79. Published

    Koneisiin lisää kestoikää kitkaväsymisen paremmalla hallinnalla

    Juoksukangas, J., Mar 2018, In : Promaint. 1, p. 24-26 3 p.

    Research output: Contribution to journalArticleProfessional

  80. Published

    IDDRG 2017 konferenssi Munchenissä - Materials Modelling for Sheet Metal Forming

    Peura, P., 20 Sep 2017, In : Ohutlevy-lehti. 2, p. 7-9 3 p.

    Research output: Contribution to journalArticleProfessional

  81. Published

    Tuntemalla olosuhteet voit optimoida materiaalit kulutussovelluksiin

    Ratia, V., Ojala, N., Valtonen, K. & Heino, V., May 2016, In : Promaint. 3, p. 16-20

    Research output: Contribution to journalArticleProfessional

  82. Published

    Nopeutettu elinkaaren määritys, Tampereen teknillisen yliopiston NEM-projekti

    Miettinen, J., 10 Mar 2016, In : Koneviesti. 2016, 4, p. 44-45 2 p.

    Research output: Contribution to journalArticleProfessional

  83. Published

    Kitka ja kuluminen haastavat koneensuunnittelijat

    Valtonen, K. & Lehtovaara, A., 16 Feb 2016, In : Materia. 2016, 1, p. 29-30 2 p.

    Research output: Contribution to journalArticleProfessional

  84. Published

    Reiänlaajennustesti - voidaanko sen tulos ennustaa vetokokeen perusteella?

    Peura, P., Chufan, S., Hokka, M. & Minkkinen, A., 2016, In : Ohutlevy-lehti. 2, p. 28-33 6 p.

    Research output: Contribution to journalArticleProfessional

  85. Published

    Soodakattilan käyttövarmuuden parantaminen tuhkayhdisteiden käyttäytymistä mallintamalla

    Leppänen, A. & Haaga, K., 2015, In : Promaint. 3/2015, p. 25-27 3 p.

    Research output: Contribution to journalArticleProfessional

  86. Published

    Keskipakopumppujen mitoituksen ja käytön haasteet

    Lehtonen, E. & Rinkinen, J., 2015, In : Promaint. 29, 4, p. 37-39 3 p.

    Research output: Contribution to journalArticleProfessional

  87. Published

    Teollinen internet täydentää pk-yritysten palveluita

    Väliaho, V., Martinsuo, M., Koskinen, K. & Aaltonen, J., 2015, In : Promaint. 29, 5, p. 36-38 3 p.

    Research output: Contribution to journalArticleProfessional

  88. Published

    Suomalaisten konepajojen tuotannonsuunnittelu on ERP:n ja Excel-taulukoiden varassa

    Järvenpää, E. & Lanz, M., 2014, In : Stoori. 4, p. 19-24 6 p.

    Research output: Contribution to journalArticleProfessional

  89. Published

    Peruskäyttöalue - metalliteollisuus

    Koskinen, K. T., 2014, In : Konstruktor. 4, p. 66-67 2 p.

    Research output: Contribution to journalArticleProfessional

  90. Published

    Water Hydraulics Pushes Into High-Pressure Systems

    Koskinen, K. T. & Aaltonen, J., 2014, In : Hydraulics & Pneumatics. 67, 2, p. 84-89 4 p.

    Research output: Contribution to journalArticleProfessional

  91. Published

    A perfect fit

    Lehtinen, J., Pajunen, S. & Heinonen, O., 2013, In : Ansys Advantage. 7, 2, p. 26-29 4 p.

    Research output: Contribution to journalArticleProfessional

  92. Published

    Polttoainekulut kuriin

    Huhtala, K., 2013, In : Fluid Finland. 12, 2, p. 14-16 3 p.

    Research output: Contribution to journalArticleProfessional

  93. Published

    Pääkirjoitus: Tehokkuutta sitähän se kaikki on

    Huhtala, K., 2013, In : Fluid Finland. 12, 1, p. 5-5 1 p.

    Research output: Contribution to journalArticleProfessional

  94. Published

    Täältä pesee - Hydraulikomponenttien pesukoneet ja nesteet kuntoon

    Elo, L., Kuosku, M. & Rinkinen, J., 2013, In : Promaint. 27, 5, p. 42-45 4 p.

    Research output: Contribution to journalArticleProfessional

  95. Published

    Puhtaus on puoli hydrauliikkaa

    Kuosku, M. & Rinkinen, J., 2013, In : Promaint. 27, 5, p. 34-36 3 p.

    Research output: Contribution to journalArticleProfessional

  96. Published

    Digitaalihydrauliikan seminaarin satoa Tampereella

    Linjama, M., 2013, In : Fluid Finland. 12, 1, p. 8-8 1 p.

    Research output: Contribution to journalArticleProfessional

  97. Published

    Uudenlaista kuormantuntotekniikkaa

    Pihlajamäki, T. & Luomaranta, M., 2013, In : Fluid Finland. 12, 1, p. 12-15 4 p.

    Research output: Contribution to journalArticleProfessional

  98. Published

    Kantavuutta maaperään massastabiloinnilla

    Seppälä, J. & Rinkinen, J., 2013, In : Promaint. 27, 3, p. 42-44 3 p.

    Research output: Contribution to journalArticleProfessional

  99. Published

    Kitkaväsymisen tuomat haasteet

    Juoksukangas, J. & Lehtovaara, A., 2012, In : Materia. 70, 5, p. 56-57

    Research output: Contribution to journalArticleProfessional

  100. Published

    Reliability and Maintainability

    Virtanen, S., 2012, In : Public Service Review, Europe. 24, p. 516-517

    Research output: Contribution to journalArticleProfessional

  101. Published

    Digitaalinen Hydraulisäätö - tulevaisuuden tekniikkaa?

    Siivonen, L., 2012, In : Promaint. 26, 7, p. 41-43

    Research output: Contribution to journalArticleProfessional

  102. Published

    Full-Field-menetelmä käänteisessä monitoroinnissa

    Miettinen, J. & Ojala, P., 2012, In : Promaint. 26, 5, p. 34-38

    Research output: Contribution to journalArticleProfessional

  103. Published

    Hydrauliikan aika ei ole ohi - The time of hydraulics is not over

    Linjama, M., 2012, In : Fluid Finland. 11, 2, p. 10-12

    Research output: Contribution to journalArticleProfessional

  104. Published

    Elintarviketeollisuuden koneautomaation kehitys kaipaa tiivistämistä

    Sairiala, H. & Koskinen, K. T., 2012, In : Kehittyvä elintarvike. 23, 4, p. 12-13

    Research output: Contribution to journalArticleProfessional

Previous 1 2 3 4 5 6 7 8 ...13 Next
Download list To download, please limit the number of search results to 1,000 or less.