Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. A1 Journal article-refereed
  2. Published

    Considering aspects of lean, agility, and sustainability in digital manufacturing systems

    Nylund, H., Kirman, B., Koho, M., Tapaninaho, M. & Torvinen, S., 2012, In : International Journal of Advanced Manufacturing Systems. 14, 2, p. 9-16

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    On the equivalence of minimum compliance and stress-constrained minimum weight design of trusses under multiple loading conditions

    Mela, K. & Koski, J., 2012, In : Structural and Multidisciplinary Optimization. 46, 5, p. 679-691

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Direct computation of critical equilibrium states for spatial beams and frames

    Mäkinen, J., Kouhia, R., Fedoroff, A. & Marjamäki, H., 2012, In : International Journal for Numerical Methods in Engineering. 89, 2, p. 135-153

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Data analysis process of working hydraulics of small mobile machine

    Krogerus, T., Rokala, M. & Koskinen, K. T., 2012, In : International Journal of Fluid Power. 13, 3, p. 5-15

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    Sensor module for hydraulic boom state feedback control

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2012, In : International Journal of Fluid Power. 13, 3, p. 15-23

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    A Petri net-based approach to incremental modelling of flow and resources in service-oriented manufacturing systems

    Popescu, C., Cavia Soto, M. & Martinez Lastra, J. L., 2012, In : International Journal of Production Research. 50, 2, p. 325-343

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    An Exceptional Generalization of the Poisson Distribution

    Hagmark, P-E., 2012, In : Open Journal of Statistics. 2, p. 313-318

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Optimized laser processing of calibration blocks for grinding burn detection with Barkhausen noise

    Santa-aho, S., Vippola, M., Sorsa, A., Lindgren, M., Latokartano, J., Leiviskä, K. & Lepistö, T., 2012, In : Journal of Materials Processing Technology. 212, p. 2282-2293

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Optimization of isothermal plate fin arrays with laminar forced convection

    Lindstedt, M. & Karvinen, R., 2012, In : Journal of Enhanced Heat Transfer. 19, 6, p. 535-547

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Detection and isolation of leakage and valve faults in hydraulic systems in varying loading conditions, Part 2: Fault detection and isolation scheme

    Nurmi, J. & Mattila, J., 2012, In : International Journal of Fluid Power. 13, 1, p. 17-27

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Optimization of Plate Fin Arrays with Laminar and Turbulent Forced Convection

    Lindstedt, M. & Karvinen, R., 2012, In : Journal of Physics: Conference Series. 395, p. 1-8 8 p., 012059.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Precise online auto-focus system in high speed laser micromachining applications

    Määttänen, A., Hautala, V. & Vihinen, J., 2012, In : Physics Procedia. 39, p. 807-813

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    On Three Competing Maintenance Actions and the Related Condition Control

    Hagmark, P-E., 2011, In : International Journal of Quality, Statistics, and Reliability. 2011, p. 1-6 6 p., 637079.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Minimizing the Maximum Curvature of Quadratic Bezier Curves with a Tetragonal Concave Polygonal Boundary Constraint

    Choi, J., Curry, R. E. & Elkaim, G. H., 2011, In : Computer-Aided Design. 44, 4, p. 1-22 22 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Modelling and analysis of fretting wear in rough point contacts in partial slip conditions

    Lehtovaara, A. & Lönnqvist, C., 2011, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 225, 10, p. 986-998

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    The Effects of Laser Welding on the Heterogeneous Immunoassay Performance in a Microfluidic Cartridge

    Mäntymaa, A., Halme, J., Välimaa, L. & Kallio, P., 2011, In : Biomicrofluidics. 5, 4, p. 1-11 11 p., 046504.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Lagrangian tracking of bubbles interacting with pin-fins in a microchannel

    Honkanen, M., Elcock, D., Kuo, C-J., Peles, Y. & Amitay, M., 2011, In : Experiments in Fluids. 50, 6, p. 1527-1538

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Real-time markerless Augmented Reality for Remote Handling system in bad viewing conditions

    Ziaei, Z., Hahto, A., Mattila, J., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2033-2038

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Lasin karkaisun laatuongelmat

    Aronen, A., 2011, In : Rakenteiden mekaniikka. 44, 2, p. 140-155

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    Command and Control application framework for interoperable heterogeneous ITER Remote Handling devices

    Tuominen, J., Muhammad, A., Mattila, J., Aha, L., Saarinen, H., Siuko, M., Hamilton, D. & Semerero, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2067-2070

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Energy efficiency in double disc refining - Influence of intensity by segment design

    Muhic, D., Huhtanen, J-P., Sundström, L., Sandberg, C., Ullmar, M., Vuorio, P. & Engstrand, P., 2011, In : Nordic Pulp and Paper Research Journal. 3, p. 1-8 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    DTP2 control room operator and remote handing operation designer responsibilities and information available to them

    Aha, L., Salminen, K., Hahto, A., Saarinen, H., Mattila, J., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2078-2081

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    On the orientation probability distribution of flexible fibres in a contracting channel flow

    Niskanen, H., Eloranta, H., Tuomela, J. & Hämäläinen, J., 2011, In : International Journal of Multiphase Flow. 37, 4, p. 336-345

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Numerical modelling of bit-rock fracture mechanisms in percussive drilling with a continuum approach

    Saksala, T., 2011, In : International Journal for Numerical and Analytical Methods in Geomechanics. 35, 13, p. 1483-1505

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Bubble dynamics and interactions with a pair of micro pillars in tandem

    Elcocka, D., Honkanen, M., Kuoc, C., Amitaya, M. & Pelesa, Y., 2011, In : International Journal of Multiphase Flow. 37, 5, p. 440-452

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Modelling and evaluation of the fretting fatigue cracking risk in smooth spherical contacts

    Lehtovaara, A., Rabb, R. & Pasanen, A., 2011, In : Tribology International. 44, 11, p. 1526-1534

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    Categorization of ITER remote handling operations

    Salminen, K., Aha, L., Saarinen, H., Siuko, M., Mattila, J. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2075-2077

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    Detection and isolation of leakage and valve faults in hydraulic systems in varying loading conditions, Part 1: Global sensitivity analysis

    Nurmi, J. & Mattila, J., 2011, In : International Journal of Fluid Power. 12, 3, p. 41-51

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    Genetic optimization of a fast solenoid actuator for a digital hydraulic valve

    Pellikka, M., Ahola, V., Söderlund, L. & Uusitalo, J-P., 2011, In : International Journal of Fluid Power. 12, 2, p. 49-56

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Analytical solution for a class of flat plate conjugate convective heat transfer problems

    Lehtinen, A. & Karvinen, R., 2011, In : Frontiers in Heat and Mass Transfer. 2, p. 1-6 6 p., 043004.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    Effect of start-up schemes and amplitude of tangential motion on friction behavior in fretting point contact

    Hintikka, J., Lehtovaara, A. & Lönnqvist, C., 2011, In : Tribology International. 44, 11, p. 1535-1543

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    Framework for extended digital manufacturing systems

    Nylund, H. & Andersson, P. H., 2011, In : International Journal of Computer Integrated Manufacturing. 24, 5, p. 446-456

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    Low temperature nanoparticle sintering with continuous wave and pulse lasers

    Kumpulainen, T., Pekkanen, J., Valkama, J., Laakso, J., Tuokko, R. & Mäntysalo, M., 2011, In : Optics and laser technology. 43, 3, p. 570-576

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    On design and development of additional End-Effectors for the Cassette Multifunctional Mover

    Valkama, P., Mattila, J., Amjad, F., Väyrynen, J., Vilenius, M., Siuko, M., Semeraro, L. & Esque, S., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 1946-1949

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    Results of CMM standalone tests at DTP2

    Saarinen, H., Kivelä, T., Zhai, L., Hämäläinen, V., Karjalainen, J-P., Aha, L., Heikkilä, L., Mäkinen, H., Järvenpää, J., Kiviranta, S., Krassi, B., Viinikainen, M., Siuko, M., Mattila, J., Esque, S. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 1907-1910

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    Analysis of the new architecture proposal for the CMM control system

    Heikkilä, L., Saarinen, H., Aha, L., Viinikainen, M., Mattila, J., Hahto, A., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2071-2074

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    Ubiquitous Integration of Cooperating Objects

    Karnouskos, S., Villasenor, V., Handte, M. & Marron, P. J., 2011, In : International Journal of Next-Generation Computing. 2, 3, p. 1-19 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    Optimal design of stiffened plate using metamodeling techniques

    Heinonen, O. & Pajunen, S., 2011, In : Rakenteiden mekaniikka. 44, 3, p. 218-230

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    Two-step Exact Solution for Mohr-Coulomb Viscoplastic Consistency Model with Linear Hardening/Softening: A Proof with Maple Software

    Saksala, T., 2011, In : American Journal of Computational and Applied Mathematics. 1, 1, p. 1-3 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    An implementation of a semantic, web-based virtual machine laboratory prototyping environment

    Salonen, J., Nykänen, O., Ranta, P., Nurmi, J., Helminen, M., Rokala, M., Palonen, T., Alarotu, V., Koskinen, K. & Pohjolainen, S., 2011, In : Lecture Notes in Computer Science. 7032, p. 221-236

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Supervisory system for DTP2 remote handling operations

    Hahto, A., Aha, L., Nurminen, T., Aaltonen, A., Heikkilä, L., Mattila, J., Siuko, M., Saarinen, H. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2047-2050

    Research output: Contribution to journalArticleScientificpeer-review

  43. Published

    Calibration and compensation of deflections and compliances in remote handling equipment configurations

    Kivelä, T., Saarinen, H., Mattila, J., Hämäläinen, V., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2043-2046

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    Concept design of the cassette toroidal mover

    Mäkinen, H., Järvenpää, J., Valkama, P., Väyrynen, J., Amjad, F., Siuko, M., Mattila, J., Semeraro, L. & Esque, S., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2092-2095

    Research output: Contribution to journalArticleScientificpeer-review

  45. Published

    Robust control of Cassette Multi-functional Mover for ITER remote handling tasks

    Zhai, L., Mattila, J., Saarinen, H. & Virvalo, T., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2008-2011

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Advantage of redundancy in the controllability of remote handling manipulator

    Muhammad, A., Mattila, J., Vilenius, M., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 1882-1885

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    What do information reuse and automated processing require in engineering design? Semantic process

    Nykänen, O., Salonen, J., Markkula, M., Ranta, P., Rokala, M., Helminen, M., Alarotu, V., Nurmi, J., Palonen, T., Koskinen, K. T. & Pohjolainen, S., 2011, In : Journal of Industrial Engineering and Management. 4, 4, 329.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    Reel-to-reel inline atmospheric plasma deposition of hydrophobic coatings

    Nättinen, K., Nikkola, J., Minkkinen, H., Heikkilä, P., Lavonen, J-P. & Tuominen, M., 2011, In : Journal of Coatings Technology and Research. 8, 2, p. 235-245

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Predicting the runtime reliability of ITER Remote Handling maintenance equipment

    Väyrynen, J., Mattila, J., Vilenius, M., Ali, M., Valkama, P., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2012-2015

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    A Semantic web services-based approach for production systems control

    Puttonen, J., Lobov, A., Cavia Soto, M. A. & Martinez Lastra, J. L., 2010, In : Advanced Engineering Informatics. 24, 3, p. 285-299

    Research output: Contribution to journalArticleScientificpeer-review

  51. Published

    Automated object locator in a forest forwarder

    Hahto, A., Mattila, J. & Koivisto, H., 2010, In : Applied Artificial Intelligence. 24, 7, p. 711-721

    Research output: Contribution to journalArticleScientificpeer-review

  52. Published

    Simulation of service-oriented and distributed manufacturing systems

    Nylund, H. & Andersson, P. H., 2010, In : Robotics and Computer-Integrated Manufacturing. 26, 6, p. 622-628

    Research output: Contribution to journalArticleScientificpeer-review

  53. Published

    An integrated approach to mixed-model assembly line balancing and sequencing

    Uddin, M. K., Cavia Soto, M. & Martinez Lastra, J. L., 2010, In : Assembly Automation. 30, 2, p. 164-172

    Research output: Contribution to journalArticleScientificpeer-review

  54. Published

    Evaluation of lubrication conditions in gear contacts using contact resistance and bulk temperature measurements

    Kleemola, J. & Lehtovaara, A., 2010, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 224, 4, p. 367-375

    Research output: Contribution to journalArticleScientificpeer-review

  55. Published

    Advances in the TUT microfactory concept development

    Heikkilä, R., Järvenpää, E. & Tuokko, R., 2010, In : International Journal of Automation Technology. 4, 2, p. 117-126

    Research output: Contribution to journalArticleScientificpeer-review

  56. Published

    Department of Intelligent Hydraulics and Automation, Tampere University of Technology, Finland

    Koskinen, K. T., 2010, In : Journal of the Japan Fluid Power System Society. 41, 1, p. 35-40

    Research output: Contribution to journalArticleScientificpeer-review

  57. Published

    Damage-viscoplastic consistency model for rock fracture in heterogeneous rocks under dynamic loading

    Saksala, T., 2010, In : International Journal for Numerical and Analytical Methods in Geomechanics. 34, 10, p. 1041-1062

    Research output: Contribution to journalArticleScientificpeer-review

  58. Published

    Safety of interactive robotics - Learning from accidents

    Malm, T., Viitaniemi, J., Latokartano, J., Lind, S., Venho-Ahonen, O. & Schabel, J., 2010, In : International Journal of Social Robotics. 2, 3, p. 221-227

    Research output: Contribution to journalArticleScientificpeer-review

  59. Published

    Damage-viscoplastic consistency model with a parabolic cap for rocks with brittle and ductile behavior under low-velocity impact loading

    Saksala, T., 2010, In : International Journal for Numerical and Analytical Methods in Geomechanics. 34, 13, p. 1362-1386

    Research output: Contribution to journalArticleScientificpeer-review

  60. Published

    Novel bistable hammer valve for digital hydraulics

    Uusitalo, J-P., Ahola, V., Söderlund, L., Linjama, M., Juhola, M. & Kettunen, L., 2010, In : International Journal of Fluid Power. 11, 3, p. 35-44

    Research output: Contribution to journalArticleScientificpeer-review

  61. Published

    Energy efficiency of three-chamber cylinder with digital valve system

    Huova, M., Laamanen, A. & Linjama, M., 2010, In : International Journal of Fluid Power. 11, 3, p. 15-22

    Research output: Contribution to journalArticleScientificpeer-review

  62. Published

    A numerical model for the calculation of fretting fatique crack initiation for a smooth line contact

    Lehtovaara, A., Lönnqvist, C. & Mäntylä, A., 2010, In : Tribologia - Finnish Journal of Tribology. 29, 1, p. 7-16

    Research output: Contribution to journalArticleScientificpeer-review

  63. Published

    Optimum geometry of fixed volume plate fin for maximizing heat transfer

    Karvinen, R. & Karvinen, T., 2010, In : International Journal of Heat and Mass Transfer. 53, 23-24, p. 5381-5385

    Research output: Contribution to journalArticleScientificpeer-review

  64. Published

    Jammed on/off valve fault compensation with distributed digital valve system

    Siivonen, L., Linjama, M., Huova, M. & Vilenius, M., 2009, In : International Journal of Fluid Power. 10, 2, p. 73-82

    Research output: Contribution to journalArticleScientificpeer-review

  65. Published

    Enhanced industrial maintenance work task planning by using virtual engineering tools and haptic user interfaces

    Leino, S-P., Lind, S., Poyade, M., Kiviranta, S., Multanen, P., Reyes-Lecuona, A., Mäkiranta, A. & Muhammad, A., 2009, In : Lecture Notes in Computer Science. 5622, p. 346-354

    Research output: Contribution to journalArticleScientificpeer-review

  66. Published

    Development of a test device for the evaluation of hydrodynamic lubrication in thrust bearings

    Pasanen, A., Kleemola, J. & Lehtovaara, A., 2008, In : Tribologia - Finnish Journal of Tribology. 27, 4, p. 12-20

    Research output: Contribution to journalArticleScientificpeer-review

  67. Laser treatment of PVD coated carbon steels and powder steels

    Surzhenkov, A., Kulu, P., Gregor, A., Vuoristo, P., Latokartano, J. & Rupponen, M., 2008, In : Materials Science: Medziagotyra. 14, 4, p. 301-305

    Research output: Contribution to journalArticleScientificpeer-review

  68. A3 Part of a book or another research book
  69. Submitted

    Life end stock need estimation for repairable spare components of obsoleting fleet by simulation

    Toikka, T., Laitinen, J. & Koskinen, K., 2019, (Submitted) WCEAM – 2018: The 13th World Congress On Engineering Asset Management: 24th-26th September, Stavanger, Norway. 10 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  70. Published

    Enablers and barriers of smart data-based asset management services in industrial business networks

    Ahonen, T., Hanski, J., Hyvärinen, M., Kortelainen, H., Uusitalo, T., Vainio, H., Kunttu, S. & Koskinen, K., 2019, Lecture Notes in Mechanical Engineering. Pleiades Publishing, p. 51-60 10 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  71. Published

    Modelling of digital extended enterprise

    Pulkkinen, A., Vainio, V., Anttila, J. P. & Leino, S-P., 17 Oct 2018, 20th International Dependency and Structure Modeling Conference: Oct. 15-17, 2018, Trieste, Italy. Leardi, C., Browning, T. R., Eppinger, R., Steven, D. & Becerril, L. (eds.). The Design Society, p. 139-148 10 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  72. Published

    Creativity from design and Iinnovation perspectives

    Medyna, G., Coatanea, E., Christophe, F., Bakhouya, M., Choulier, D. & Forest, J., 5 Aug 2018, Encyclopedia of creativity, invention, innovation and entrepreneurship. Springer, 8 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  73. Published

    Collaborative Systems and Environments for Future Working Life: Towards the Integration of Workers, Systems and Manufacturing Environments

    Hämäläinen, R., Lanz, M. & Koskinen, K. T., 2017, The Impact of Digitalization in the Workplace: An Educational View. Springer, p. 25-38 13 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  74. Published

    Two models for hydraulic cylinders in flexible multibody simulations

    Ylinen, A., Mäkinen, J. & Kouhia, R., 2016, Computational Methods for Solids and Fluids: Multiscale Analysis, Probability Aspects and Model Reduction. Springer, p. 463-493 31 p. (Computational Methods in Applied Sciences; vol. 41).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  75. Published

    Successful Industrial and Academia Cooperation in Technology Industry

    Riitahuhta, A. & Oja, H., 12 Jul 2015, Impact of Design Research on Industrial Practice: Tools, Technology, and Training. Chakrabarti, A. & Lindemann, U. (eds.). Springer International Publishing, p. 269-280 12 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  76. Published

    Activity report of COST Action TU0905 Working Group 2 – Material characterization and material improvement

    Schneider, J., Karvinen, R., Vandebroek, M. & Savineau, G., 2014, Proceedings volume of the Challenging Glass 4 & COST Action TU0905 Final Conference, 6-7 February 2014 at the EPFL in Lausanne, Switzerland. Louter, C., Bos, F., Belis, J. & Lebet, J-P. (eds.). CRC Press, p. 21-24 4 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  77. Published

    Implementing circulating oil lubrication systems based on the IMC-AESOP architecture

    Camp, R. & Lobov, A., 2014, Industrial cloud-based cyber-physical systems. The IMC-AESOP approach. Colombo, A. W., Bangemann, T., Karnouskos, S., Delsing, J., Stluka, P., Harrison, R., Jammes, F. & Martinez Lastra, J. L. (eds.). Springer, p. 183-202 20 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  78. Published

    CO-Based Outdoor Smart Lighting for Energy Aware Factory

    Florea, A., Farahat, A., Postelnicu, C., Martinez Lastra, J. L. & Azcondo Sánchez, F. J., 2014, Internet of Things Based on Smart Objects. Fortino, G. & Trunfio, P. (eds.). Springer International Publishing, p. 69-83 15 p. (Internet of Things).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  79. Published

    Hydraulic Cylinders

    Koskinen, K. T. & Aaltonen, J., 2013, Encyclopedia of Tribology. Wang, Q. J. & Chung, Y-W. (eds.). Springer US, p. 1709-1718 10 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  80. Published

    Numerical modeling and experimentation of dynamic indentation with single and triple indenters on Kuru granite

    Saksala, T., Gomon, D., Hokka, M. & Kuokkala, V-T., 2013, Rock Dynamics and Applications - State of the Art, Proceedings of the first international conference on rock dynamics and applications, RocDyn-1, Lausanne, Switzerland, 6-8 June 2013. Zhao, J. & Li, J. (eds.). Boca Raton: CRC Press Taylor & Francis Group : A Belkema Book, p. 415-421 7 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  81. Published

    Principles of Classification

    Lumme, V., 2013, Diagnostics and Prognostics of Engineering Systems: Methods and Techniques. Seifedine, K. (ed.). IGI Global, p. 55-73 19 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  82. Published

    Failure Simulations with a Strain Rate Dependent Ductile-to-Brittle Transition Model

    Hartikainen, J., Kolari, K. & Kouhia, R., 2013, Numerical Methods for Differential Equations, Optimization, and Technological Problems. Repin, S., Tiihonen, T. & Tuovinen, T. (eds.). Springer, p. 431-444 14 p. (Computational Methods in Applied Sciences; vol. 27).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  83. Published

    Heat transfer phenomena and theories governing residual stress formation in glass tempering

    Karvinen, R., 2013, COST Action TU0905 Mid-term Conference on Structural Glass, Proceedings of Cost Action TU0905 Mid-term Conference on Structural Glass, Porec, Croatia, 18-19 April, 2013. Belis, J., Louter, C. & Mocibob, D. (eds.). London: CRC Press Taylor & Francis Group, p. 573-580 8 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  84. Published

    Digital manufacturing supporting autonomy and collaboration of manufacturing systems

    Nylund, H. & Andersson, P. H., 2012, Manufacturing systems. Faieza, A. A. (ed.). Rijeka, Croatia: InTech, p. 261-284

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  85. Published

    Towards adaptive manufacturing systems - knowledge and knowledge management systems

    Lanz, M., Järvenpää, E., Garcia, F., Luostarinen, P. & Tuokko, R., 2012, Manufacturing systems. Faieza, A. A. (ed.). Rijeka, Croatia: InTech, p. 141-158

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  86. Published

    Adaptation of manufacturing systems in dynamic environment based on capability description method

    Järvenpää, E., Luostarinen, P., Lanz, M. & Tuokko, R., 2012, Manufacturing systems. Faieza, A. A. (ed.). Rijeka, Croatia: InTech, p. 93-118

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  87. Published

    Assembly line balancing and sequencing

    Uddin, K. M. & Martinez Lastra, J. L., 2011, Assembly Line - Theory and Practice. Grzechca, W. (ed.). Croatia: InTech, p. 13-36

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  88. Published

    Development of Controllers Using Simulink and Contract-Based Design. Chapter 8

    Boström, P., Huova, M., Olszewska, M., Linjama, M., Heikkilä, M., Sere, K. & Walden, M., 2011, Dependability and Computer Engineering: Concepts for Software-Intensive Systems. Petre, L., Sere, K. & Troubitsyna, E. (eds.). Hershey, PA: IGI Global, p. 151-169

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  89. Published

    Technology of Jet Ventilation

    Virtanen, J. & Karvinen, R., 2011, Joint Papers on Jet Ventilation: Paper Collection initiated by the European Society for Jet Ventilation, June, 2010. Baer, G. A. (ed.). Tampere: Tampere University Press, p. 5-17

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  90. Published

    Water Hydraulic

    Koskinen, K. T. & Vilenius, M., 2011, Handbook of Hydraulic Fluid Technology. Totten, G. E. & De Negri, V. J. (eds.). Boca Raton,FL: CRC Press, p. 723-757

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  91. Published

    Open Product Development

    Riitahuhta, A., Lehtonen, T., Pulkkinen, A. & Huhtala, P., 2011, The future of design methodology. Birkhofer, H. (ed.). London: Springer, p. 135-146

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  92. Published

    Dynamics of wire-driven machine mechanisms, Part II: Theory and applications

    Keskinen, E., Karvinen, T. & Montonen, J., 2010, Dynamical Systems: Discontinuity, Stochasticity abd Time-Delay. Luo Albert, C. J. (ed.). p. 299-317

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  93. Published

    Factory level logistics and control aspects for flexible and reactive microfactory concept

    Järvenpää, E., Heikkilä, R. & Tuokko, R., 2010, Frontiers of Assembly and Manufacturing - Selected papers from ISAM 2009. Lee, S., Suarez, R. & Choi, B-W. (eds.). Springer-Verlag Berlin Heidelberg, p. 127-140

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  94. Published

    Dynamics of wire-driven machine mechanisms: Literature review

    Karvinen, T. & Keskinen, E., 2010, Dynamical Systems: Discontinuity, Stochasticity abd Time-Delay. Luo Albert, C. J. (ed.). p. 285-298

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  95. A4 Article in a conference publication
  96. Accepted/In press

    Online stabilization of dc power distribution systems applying mimo-identification method and resonance-enhanced voltage controller

    Abdollahi, H., Roinila, T., Arrua, S. & Santi, E., 25 May 2019, (Accepted/In press) Proceedings of the 11th Annual IEEE Energy Conversion Congress and Exposition 2019, IEEE-ECCE: Sept. 29 - Oct. 3 2019, Baltimore, Maryland, USA. IEEE

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  97. Published

    Method for evaluating the value of technology in the manufacturing industry

    Mämmelä, J., Juuti, T., Julkunen, P., Lemmetty, P. & Pakkanen, J., 2019, The 13th World Congress on Engineering assets and public infrastructures in the age of digitalization, WCEAM: 24th-26th September, Stavanger, Norway.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  98. Accepted/In press

    Value creation mechanisms of modularisation and engineering asset lifecycle

    Pakkanen, J., Juuti, T. & Lehtonen, T., 2019, (Accepted/In press) Engineering Assets and Public Infrastructures in the Age of Digitalization: WCEAM, Proceedings of the 13th World Congress on Engineering Asset Management, 24th-26th September, Stavanger, Norway. Springer, 8 p. 120

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  99. Accepted/In press

    Gas-liquid ratio imbalance indicators of a fighter aircraft shock absorber

    Heininen, A., Aaltonen, J., Koskinen, K. & Huitula, J., 2019, (Accepted/In press) Proceedings of the 13th World Congress on Engineering Asset Management: WCEAM, 24-26 September 2018, Stavanger, Norway. Springer-Verlag, Berlin

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  100. Published

    Comfort Design in Human Robot Cooperative Tasks

    Changizi, A., Dianatfar, M. & Lanz, M., 2019, Human Systems Engineering and Design - Proceedings of the 1st International Conference on Human Systems Engineering and Design IHSED2018: Future Trends and Applications. Springer Verlag, p. 521-526 6 p. (Advances in Intelligent Systems and Computing; vol. 876).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  101. Published

    The comfort zone concept in a human-robot cooperative task

    Changizi, A. & Lanz, M., 2019, Precision Assembly in the Digital Age - 8th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2018, Revised Selected Papers. Springer New York LLC, Vol. 530. p. 82-91 10 p. (IFIP Advances in Information and Communication Technology; vol. 530).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  102. Published

    Creating resource combinations based on formally described hardware interfaces

    Siltala, N., Järvenpää, E. & Lanz, M., 2019, Precision Assembly in the Digital Age - 8th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2018, Revised Selected Papers. Springer New York LLC, Vol. 530. p. 29-39 11 p. (IFIP Advances in Information and Communication Technology; vol. 530).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  103. Published

    Probabilistic Modelling of Defects in Additive Manufacturing: A Case Study in Powder Bed Fusion Technology

    Mokhtarian, H., Hamedi, A., Nagarajan, H., Panicker, S., Coatanea, E. & Haapala, K., 31 Dec 2018, 52nd CIRP Conference on Manufacturing Systems. Elsevier, p. 956-961 (Procedia CIRP; vol. 81).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...13 Next
Download list To download, please limit the number of search results to 1,000 or less.