Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. B3 Non-refereed article in conference proceedings
  2. Published

    A service-oriented monitoring system of pressurized air in industrial systems for energy awareness

    Rabeko, P., Lobov, A. & Martinez Lastra, J. L., 2011, GlobeNet 2011, The Sixth International Conference on Systems, ICONS 2011, 23-28 January, 2011, St. Maarten, The Netherlands Antilles. St. Maarten: IARIA, p. 150-156 (International Conference on Systems ICONS GlobeNet).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  3. Published

    Finnish manufacturing companies' views on sustainable development and sustainable manufacturing

    Koho, M., Kuusela, J. & Tapaninaho, M., 2011, Tampere Manufacturing Summit, Lean and Sustainable, 23-25 May, 2011, Tampere Hall, Tampere, Finland. Tampere: Tampere Manufacturing Summit, (Tampere Manufacturing Summit, Lean and Sustainable).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  4. Published

    Position control fo PWM-actuated pneumatic musckle actuator system

    Jouppila, V. & Ellman, A., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA. New York, NY: ASME, (ASME International Mechanical Engineering Congress and Exposition IMECE2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  5. Published

    Thin-shell response to machining loads

    Dospel, V. & Keskinen, E., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA. New York, NY: ASME, p. 1-10 10 p. (ASME International Mechanical Engineering Congress and Exposition IMECE2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  6. Published

    Integrated product/process system for next generation manufacturing

    Salminen, K., 2011, Tampere Manufacturing Summit 2011, Lean and Sustainable, 23-25 May, 2011, Tampere Hall, Tampere, Finland. Tampere: Tampere Manufacturing Summit, (Tampere Manufacturing Summit, Lean and Sustainable).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  7. Published

    Sustainable manufacturing and eco-factories within sustainable industrial areas within fast growing eco-cities

    Leino, T., Salminen, K. & Joutsiniemi, A., 2011, 21st International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2011, 26-29 June, 2011, Taichung, Taiwan. Taichung: FAIM 2011, p. 747-754 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  8. Published

    Decentralized production planning and control in a collaborative SME network

    Toivonen, V., Väistö, V., Perälä, T. & Tuokko, R., 2011, 21st International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2011, 26-29 June, 2011, Taichung, Taiwan. Taichung: FAIM 2011, p. 621-629 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  9. Published

    Effect of the Immersion Level of a Virtual Loader Simulator on the Sense of Presence

    Kuusisto, J., Ellman, A., Kaapu, T. & Tiainen, T., 2011, ASME 2011 World Conference on Innovative Virtual Reality WINVR2011, June 27-29, 2011, Milan, Italy. New York, NY: ASME, (ASME World Conference on Innovative Virtual RealityWINVR).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  10. Published

    Considering aspects of lean, agility, and sustainability in digital manufacturing systems

    Nylund, H., Kirman, B., Koho, M., Tapaninaho, M. & Torvinen, S., 2011, Proceedings of the International Conference on Agile Manufacturing systems, ICAM 2011, Systems approach for enhancing agility of organizations and processes, 18-20 December, 2011, Dayalbagh Educational Institute, Agra, India. Hans Raj, K., Verma, A. K., Dwivedi, S. N., Patvardhan, C., Mishra, D. S. & Sharma, R. S. (eds.). Agra: ICAM 2011, p. 580-586 (International Conference on Agile Manufacturing systems ICAM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  11. Published

    Uusi menetelmä tuotantojärjestelmän rakentamiseen valmiista moduuleista

    Siltala, N. & Tuokko, R., 2011, Automaatio XIX Seminaari, 15-16.3.2011, Helsinki. SAS julkaisusarja. Visala, A. (ed.). Helsinki: Suomen Automaatioseura, p. 1-6 6 p. (Automaatio Seminaari; vol. 41).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  12. Published

    Numerical modelling of bit-rock interaction in percussive drilling

    Saksala, T., 2010, ECCM 2010, IV European Conference on Computational Mechanics, May 16-21, 2010, Paris, France. p. 1-2 2 p. 2078

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  13. Published

    Coal char combustion under chemical kinetics controlled conditions

    Rodriguez Avila, M., Tolvanen, H., Siitonen, T. & Raiko, R., 2010, International Conference on Applied Energy (ICAE 2010), Energy Solutions for a Sustainable World, 21-23 April 2010, Singapore. p. 459-468

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  14. Published

    Developing competitive and sustainable performance metrics for an intelligent manufacturing environment

    Nylund, H., Lanz, M., Ranta, A., Ikkala, K. & Tuokko, R., 2010, Proceedings of International Scientific Conference on Management of Technology - Step to Sustainable Production, MOTSP 2010, 2-4 June, 2010, Rovinj, Croatia. Baric, G. & Dukic, G. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  15. Published

    An information framework for estimation of instrument transformer cost

    Pavlic, D. & Vanhatalo, M., 2010, Proceeding of 11th International Design Conference DESIGN 2010, 17-20 May, 2010, Dubrovnik, Croatia. p. 1713-1720

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  16. Published

    Laser produced grinding burns for Barkhausen noise measurement result validation

    Santa-Aho, S., Sorsa, A., Vippola, M., Latokartano, J., Lindgren, M. & Lepistö, T., 2010, The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies CM2010 / MFPT 2010, 22-24 June 2010, Ettington Chase, Stratford-upon-Avon, England. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  17. Published

    Voiteluaineen vaihdon vaikutus

    Miettinen, J., 2010, Värähtelyklinikka 2010, Kunnonvalvonnan uudistaminen, Kunnossapitoyhdistys, 14.-16.4.2010, Silja Symphony, Helsinki-Tukholma-Helsinki. p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  18. Published

    ON3 - Biohybrid nanocomposite coatings from sonicated chitosan and nanoclay

    Vartiainen, J., Tuominen, M. & Nättinen, K., 2010, 4th Shelf Life International Meeting (SLIM), June 23-25, 2010, Zaragoza, Spain. p. 24-24

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  19. Published

    Adaptive gripper system for small optical assemblies

    Heikkilä, R., Prusi, T., Ha, T. H., Song, J. Y., Lee, C. W. & Tuokko, R., 2010, Proceedings of the 7th International Workshop on Microfactories, IWMF 2010, 24-27 October, 2010, Daejeon, Korea. p. 308-312

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  20. Published

    Tool for concept evaluation based on the properties of the concept and the business environment

    Vanhatalo, M., Lehtonen, T., Pakkanen, J., Juuti, T. & Riitahuhta, A., 2010, Proceeding of 11th International Design Conference DESIGN 2010, 17-20 May, 2010, Dubrovnik, Croatia. p. 965-974

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  21. Published

    Energy efficiency in double disc chip refining; Influence of intensity by segment design

    Muhic, D., Huhtanen, J-P., Sundström, L., Sandberg, C., Ullmar, M., Vuorio, P. & Engstrand, P., 2010, 7th International Seminar on Fundamental Mechanical Pulp Research (IFMPRS 2010), June 21-23, 2010, Nanjing, China. p. 109-117 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  22. Published

    Microstructure and wear resistance of the laser hardened PM tool steel vanadis 6

    Surzhenkov, A., Kulu, P., Viljus, M., Vallikivi, A. & Latokartano, J., 2010, Proceedings of the 7th International Conference of DAAAM Baltic Industrial Engineering, 22-24 April, 2010, Tallinn, Estonia. Kyttner, R. (ed.). Tallinn University of Technology, p. 486-491

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  23. Published

    Robots for micro and desktop factories: examples and experiences

    Prusi, T., Vuola, A., Siltala, N., Heikkilä, R. & Tuokko, R., 2010, Proceedings of the joint conference of the 41st International Symposium on Robotics, ISR 2010, and 6th German Conference on Robotics, ROBOTIK 2010, 7-9 June, 2010, Munich, Germany. p. 1088-1094

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  24. Published

    Feature-based unfolding algorithm for sheet metal products

    Garcia, F., Lanz, M., Luostarinen, P. & Andersson, P. H., 2010, 5th International Conference on Production Research, ICPR 2010 Americas, 21-23 July, 2010, Bogotá, Colombia. p. 5 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  25. Published

    Towards automatic reconfiguration planning of changeable assembly systems

    Järvenpää, E. & Tuokko, R., 2010, Proceeding of Post-Graduate Workshop on Intelligent Machines and Transport Systems, 3-7 May 2010, CERN, Switzerland. p. 79-89

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  26. Published

    Micro H-scara robot: findings and results

    Vuola, A., Siltala, N., Heikkilä, R. & Tuokko, R., 2010, Proceedings of the 7th International Workshop on Microfactories, IWMF 2010, 24-27 October, 2010, Daejeon, Korea. p. 20-24

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  27. Published

    Bio-hybrid nanocomposite packaging materials from polysaccharides and nanoclay

    Vartiainen, J., Tuominen, M., Nättinen, K., Tammelin, T., Pere, J., Tapper, U. & Harlin, A., 2010, ICOST Action: FA0904, Conference and WGs Meeting, June 28-29, 2010, Iasi, Romania. Vasile, C. & Ciolacu, D. (eds.). p. 29-29

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  28. Published

    Digital manufacturing supporting competitive and sustainable collaboration for networked production

    Nylund, H. & Andersson, P. H., 2010, Proceedings of the 5th International Conference on Advances in Production Engineering, APE'2010, Warsaw University of Technology, Warsaw, Poland. p. 543-552

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  29. Published

    A H-scara mini robot - a dual parallel kinematics mini manipulator

    Siltala, N., Vuola, A., Heikkilä, R. & Tuokko, R., 2010, Proceedings of the joint conference of the 41st International Symposium on Robotics, ISR 2010, and 6th German Conference on Robotics, ROBOTIK 2010, 7-9 June, 2010, Munich, Germany. p. 1218-1224

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  30. Published

    Multicriterion approach to minimum compliance topology optimization of trusses with comparison to stress-constrained minimum weight design

    Mela, K. & Koski, J., 2010, Advances and Trends in Structural Engineering, Mechanics and Computation. Zingoni, A. (ed.). p. 1081-1084

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  31. Published

    Improvements to refiner performance with flow modeling and optimization

    Lindstedt, M., Huhtanen, J-P. & Karvinen, R., 2010, 7th International Seminar on Fundamental Mechanical Pulp Research (IFMPRS 2010), June 21-23, 2010, Nanjing, China. p. 202-210

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  32. Published

    The goals of assessment

    Vanhatalo, M., Lehtonen, T., Juuti, T., Pakkanen, J. & Riitahuhta, A., 2010, Proceedings of The 12th International Conference on Engineering and Product Design Education, When Design Education and Design Research meet..., Norwegian University of Science and Technology, 2-3 September, 2010, Trondheim, Norway. E&PDE2010, p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  33. Published

    Modeling and identification of a pneumatic muscle actuator system controlled by on/off solenoid valve

    Jouppila, V., Gadsden, A. & Ellman, A., 2010, Proceedings of the 7th International Fluid Power Conference IFK, Aachen, Germany, 22 - 24 March, 2010. p. 1-34 34 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  34. Published

    Enhancing learning by utilising students on creating course material and course grading evaluation

    Rapo, L. & Vanhatalo, M., 2010, Proceedings of XI International Conference on Engineering and Computer Education, INTERTECH'2010, Engineering and Technology Education Innovating for Growth, 7-10 March, 2010, Ilhéus, Brazil. p. 174-178

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  35. Published

    Introduction to contact modelling - Part 1

    Lehtovaara, A., 2010, Striking Surfaces, International Seminar on Wear Control, Tampere University of Technology, Tampere Wear Center, 20.10.2010. p. 14 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  36. Published

    Modeling of closed spare part circulation for better availability of aircraft

    Laitinen, J. & Hagmark, P-E., 2010, Proceedings of the 4th Asia-Pacific International Symposium on Advanced Reliability and Maintenance Modeling APARM 2010, Wellington, New Zealand, 2 - 4 December, 2010. Chukova, S., Haywood, J. & Dohi, T. (eds.). p. 409-416

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  37. Published

    Logical and semantical foundations for knowledge representation for assembly and manufacturing processes

    Lanz, M. & Tuokko, R., 2010, Proceeding of Post-Graduate Workshop on Intelligent Machines and Transport Systems, 3-7 May 2010, CERN, Switzerland. p. 98-109 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  38. Published

    Energy reduction in chip refining by optimization of operating parameters and segment design

    Huhtanen, J-P., Ruola, V. & Vuorio, P., 2010, 7th International Seminar on Fundamental Mechanical Pulp Research (IFMPRS 2010), June 21-23, 2010, Nanjing, China. p. 125-129

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  39. Published

    Microfactory concept for highly flexible volume assembly of watch mechanisms

    Järvenpää, E., Heikkilä, R. & Tuokko, R., 2010, Proceedings of the 7th International Workshop on Microfactories, IWMF 2010, 24-27 October, 2010, Daejeon, Korea. p. 9-14

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  40. Published

    Developing engineering creativity in the early design stages of product development process

    Ryynänen, L. & Riitahuhta, A., 2010, Proceedings of The First International Conference on Design Creativity, ICDC 2010, 29 November-1 December, 2010, Kobe, Japan. p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  41. Published

    Effect of asymmetric heat transfer on glass deformations

    Aronen, A., 2010, Conference on Architectural and Structural Applications of Glass Faculty of Architecture, Challenging Glass 2, Delft University of Technology, 20-21 May 2010, the Netherlands. Bos, F., Louter, C. & Veer, F. (eds.). p. 279-285

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  42. Published

    Managing high variety products in global value systems

    Pulkkinen, A., Riitahuhta, A., Leino, S-P., Lappeteläinen, I., Heikkilä, M. & Kohtamäki, M., 2010, The 7th International Conference on Product Lifecycle Management, PLM 10, 12-14 July, 2010, BIBA University of Bremen, Germany. Bremen: BIBA-Bremen Institut Für Produktion und Logistik GmbH, p. 13 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  43. Published

    Novel approach on application manufacturing using inkjet printing, laser ablation and new polymer substrate

    Kunnari, E., Karttunen, M., Kumpulainen, T., Kortet, S., Laine-Ma, T., Mäntysalo, M., Smalen, M. & Ruuskanen, P., 2010, ICEP2010. International Conference on Electronics Packaging, May 12-14, 2010, Hokkaido, Japan. p. 249-254

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  44. Published

    Information management challenges and enabling factors for utilizing virtual product builds

    Mela, J., Järvenpää, E., Velez, R., Lehtonen, T. & Riitahuhta, A., 2010, The 7th International Conference on Product Lifecycle Management, PLM 10, 12-14 July, 2010, BIBA University of Bremen, Germany. Bremen: BIBA-Bremen Institut Für Produktion und Logistik GmbH, p. 15 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  45. Published

    On the relation of business processes and engineering change management

    Pulkkinen, A. & Riitahuhta, A., 2009, Proceedings of the 6th International Product Lifecycle Management conference, PLM09, 6-8 July 2009, Bath, UK. McMahon, C., Dutta, D. & Huang, G. (eds.). p. 10 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  46. Published

    Symmetrization of Tensors on General Spaces and Their Applications in Continuum Mechanics

    Holopainen, S., 2009, Proceedings of 7th EUROMECH Solid Mechanics Conference - Lectures and General Sessions. Ambrosio, J. A. C. & Silva, M. P. T. (eds.). APMTAC, p. 63-64 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  47. Published

    The role of university centre for continuing education in the creation and implementation of innovation management education

    Siekkinen, R. & Riitahuhta, A., 2009, The 17th International Conference on Engineering Design ICED'09, 24-27 August, 2009, Stanford, California, USA. p. 195-202

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  48. Published

    Development of micro gripper systems for microfactories

    Heikkilä, R., Remes, M., Prusi, T. & Tuokko, R., 2008, Proceedings of the 4th International Workshop on Microfactory Technology, 10-11 July, 2008, Jeju-do, Korea. p. 4 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  49. Published

    Design education with simulation games

    Juuti, T., Hansen, P. K. & Lehtonen, T., 2008, Proceedings of the 10th Engineering and product design Eduacation International Conference, 4-5 September, 2008, Universitat Politecnica de Catalunya, Barcelona, Spain. Clarke, A., Evatt, M., Hogarth, P., Lloveras, J. & Pons, L. (eds.). p. 811-816

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  50. Published

    Improving learning results with peer evaluation

    Kallela, T., Lanz, M., Rapo, L. & Riitahuhta, A., 2008, New Perspectives in design education, Universitat Politecnica de Catalunya, 4-5 September, 2008, Barcelona, Spain. Clarke, A. (ed.). p. 799-804

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  51. Published

    Out of plane actuator concept and characterization of dielectric elastomer EAP materials

    Paajanen, M., Jouppila, V., Ellman, A., Bauer, S., Kofod, G., Karesoja, M. & Tenhu, H., 2006, Applied Material Research at VTT, Helsinki, 2006. Ritschkoff, A-C., Koskinen, J. & Paajanen, M. (eds.). Helsinki: VTT, p. 50-60

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  52. Published

    Views to micro and desktop factories - from miniaturization of products to minaturization of production equipment and factories

    Tuokko, R., 2006, Philips Precision Technology Conference (PPTC), 3-4 October, 2006, Philips Management Training and Conference Centre Groenendael, Hilvarenbeek, The Netherlands. p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  53. Published

    Effect of parameter uncertainty on reliability of hydraulic transmission system simulation

    Ellman, A., Kajaste, J., Kauranne, H. & Pietola, M., 2005, Proceedings of IMECE 2005, 2005 ASME International Mechanical Engineering Congress and Exposition, November 5-11, 2005, Orlando, Florida USA. p. 7 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  54. B2 Part of a book or another research book
  55. Published

    Micro-factories

    Järvenpää, E., Heikkilä, R., Siltala, N., Prusi, T. & Tuokko, R., 2015, Micromanufacturing Engineering and Technology. 2 ed. Elsevier, p. 549-579

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  56. Published

    Hydraulijärjestelmien suunnitteluperusteet

    Huhtala, K. & Rinkinen, J., 2014, Koneenosien suunnittelu. Björk, T., Hautala, P., Huhtala, K., Kivioja, S., Kleimola, M., Lavi, M., Martikka, H., Miettinen, J., Ranta, A., Rinkinen, J. & Salonen, P. (eds.). Helsinki: Sanoma Pro Oy, p. 436-463 28 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  57. B1 Article in a scientific magazine
  58. Published

    Preface: Special Issue on ‘New Hydraulic Components for Tough Robots’

    Suzumori, K., Hyon, S. H., Semini, C., Mattila, J. & Kanda, T., 3 May 2018, In : Advanced Robotics. 32, 9, 1 p.

    Research output: Contribution to journalEditorialScientific

  59. E-pub ahead of print

    Reconfigurable manipulator simulation for robotics and multimodal machine learning application: Aaria: Aaria

    Hautakoski, A., Aref, M. M. & Mattila, J., 1 Mar 2018, In : arXiv.org. 1803.00532.

    Research output: Contribution to journalArticleScientific

  60. Published

    Guest editorial introduction to the focused section on design and control of hydraulic robots

    Mattila, J., Semini, C., Moon, H., Buchli, J., Hyon, S., Li, P. Y. & Yao, B., 1 Apr 2017, In : IEEE - ASME Transactions on Mechatronics. 22, 2, p. 585-588 4 p.

    Research output: Contribution to journalEditorialScientific

  61. Published

    Response to discussion with DA Hills et al., concerning the article "Development of a complete contact fretting test device" by J. Juoksukangas et al.

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 2014, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 228, 1, p. 127-128 2 p.

    Research output: Contribution to journalArticleScientific

  62. Published

    Erratum: 3D numerical modelling of bit-rock fracture mechanisms in percussive drilling with a multiple-button bit (vol 37, pg 309, 2013)

    Saksala, T., 2013, In : International Journal for Numerical and Analytical Methods in Geomechanics. 37, 3, p. 325-330 6 p.

    Research output: Contribution to journalArticleScientific

  63. Published

    Discussion: Is the future of fluid power digital? Response

    Linjama, M., Scheidl, R. & Schmidt, S., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 226, I6, p. 726-727

    Research output: Contribution to journalArticleScientific

  64. Published

    Hydrauliikan komponenttipuhtausstandardien hyödyntäminen suomalaisessa konepajateollisuudessa

    Rinkinen, J., 2010, In : Fluid Finland. 1/2010, p. 18-23

    Research output: Contribution to journalArticleScientific

  65. Published

    Reitinvalintaa rastilta seuraavalle

    Huhtala, K., 2010, In : Fluid Finland. 3-4, p. 7-7

    Research output: Contribution to journalArticleScientific

  66. Published

    Koulutuksesta ja tutkimuksesta

    Huhtala, K., 2010, In : Fluid Finland. 9, 3-4, p. 6-6

    Research output: Contribution to journalArticleScientific

  67. Published

    GVT-Getriebe mit hydrostatischer Verstelleinheit

    Erkkilä, M. & Viitasalo, V., 2010, In : Mobile Maschinen. 1/2010, p. 32-33

    Research output: Contribution to journalArticleScientific

  68. Published

    Matkaraportti: Digitaalihydrauliikan seminaari marraskuisessa Linzissä

    Linjama, M., 2010, In : Fluid Finland. 1/2010, p. 12-14

    Research output: Contribution to journalArticleScientific

  69. Published

    The energy balance of the electro-hydraulic linear actuation system

    Herranen, M., Huhtala, K. & Vilenius, M., 2010, In : Journal of Energy and Power Engineering. 4, 8, p. 57-63

    Research output: Contribution to journalArticleScientific

  70. Published

    Kehitystä putkistopassin koulutusmateriaaliin

    Rinkinen, J. & Virta, S., 2010, In : Fluid Finland. 1/2010, p. 28-30

    Research output: Contribution to journalArticleScientific

  71. Published

    M1-teknologialla voidaan rakentaa virtuaalisia oppimisympäristöjä ja konelaboratorioita

    Koskinen, K. T., Leino, T., Palonen, T. & Ranta, P., 2010, In : Fluid Finland. 2/2010, p. 18-20

    Research output: Contribution to journalArticleScientific

  72. Published

    Hydraulikomponenttien käyttöikä

    Rinkinen, J. & Immonen, A., 2010, In : Fluid Finland. 1/2010, p. 8-11

    Research output: Contribution to journalArticleScientific

  73. A4 Article in a conference publication
  74. Published

    Propulsion system development and power consumption in an autonomous underwater vehicle

    Zavari, S., Usenius, O., Villa, J., Heininen, A., Salomaa, T., Laitinen, J., Aaltonen, J. & Koskinen, K. T., 31 Oct 2019, 2019 23rd International Conference on System Theory, Control and Computing (ICSTCC). IEEE, p. 521-524 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  75. Published

    Internal and external stakeholders’ impact on product development curriculum design

    Lindsten, H., Auvinen, P. & Juuti, T., 12 Sep 2019, DS 95: Proceedings of the 21st International Conference on Engineering and Product Design Education (E&PDE 2019), University of Strathclyde, Glasgow. 12th -13th September 2019. The Design Society

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  76. Accepted/In press

    Online stabilization of dc power distribution systems applying mimo-identification method and resonance-enhanced voltage controller

    Abdollahi, H., Roinila, T., Arrua, S. & Santi, E., 25 May 2019, (Accepted/In press) Proceedings of the 11th Annual IEEE Energy Conversion Congress and Exposition 2019, IEEE-ECCE: Sept. 29 - Oct. 3 2019, Baltimore, Maryland, USA. IEEE

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  77. Published

    Method for evaluating the value of technology in the manufacturing industry

    Mämmelä, J., Juuti, T., Julkunen, P., Lemmetty, P. & Pakkanen, J., 2019, The 13th World Congress on Engineering assets and public infrastructures in the age of digitalization, WCEAM: 24th-26th September, Stavanger, Norway.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  78. Accepted/In press

    Value creation mechanisms of modularisation and engineering asset lifecycle

    Pakkanen, J., Juuti, T. & Lehtonen, T., 2019, (Accepted/In press) Engineering Assets and Public Infrastructures in the Age of Digitalization: WCEAM, Proceedings of the 13th World Congress on Engineering Asset Management, 24th-26th September, Stavanger, Norway. Springer, 8 p. 120

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  79. Accepted/In press

    Gas-liquid ratio imbalance indicators of a fighter aircraft shock absorber

    Heininen, A., Aaltonen, J., Koskinen, K. & Huitula, J., 2019, (Accepted/In press) Proceedings of the 13th World Congress on Engineering Asset Management: WCEAM, 24-26 September 2018, Stavanger, Norway. Springer-Verlag, Berlin

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  80. Published

    Comfort Design in Human Robot Cooperative Tasks

    Changizi, A., Dianatfar, M. & Lanz, M., 2019, Human Systems Engineering and Design - Proceedings of the 1st International Conference on Human Systems Engineering and Design IHSED2018: Future Trends and Applications. Springer Verlag, p. 521-526 6 p. (Advances in Intelligent Systems and Computing; vol. 876).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  81. Published

    The comfort zone concept in a human-robot cooperative task

    Changizi, A. & Lanz, M., 2019, Precision Assembly in the Digital Age - 8th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2018, Revised Selected Papers. Springer New York LLC, Vol. 530. p. 82-91 10 p. (IFIP Advances in Information and Communication Technology; vol. 530).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  82. Published

    Creating resource combinations based on formally described hardware interfaces

    Siltala, N., Järvenpää, E. & Lanz, M., 2019, Precision Assembly in the Digital Age - 8th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2018, Revised Selected Papers. Springer New York LLC, Vol. 530. p. 29-39 11 p. (IFIP Advances in Information and Communication Technology; vol. 530).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  83. Published

    Probabilistic Modelling of Defects in Additive Manufacturing: A Case Study in Powder Bed Fusion Technology

    Mokhtarian, H., Hamedi, A., Nagarajan, H., Panicker, S., Coatanea, E. & Haapala, K., 31 Dec 2018, 52nd CIRP Conference on Manufacturing Systems. Elsevier, p. 956-961 (Procedia CIRP; vol. 81).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  84. Published

    Aggregated Modeling and Power Hardware-in-the-Loop Emulation of Grid Impedance

    Alenius, H., Messo, T., Reinikka, T. & Roinila, T., 6 Dec 2018, The 10th Annual IEEE Energy Conversion Congress and Exposition (ECCE 2018): September 23-27, 2018, Portland, Oregon, USA. IEEE, p. 4179-4186 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  85. Published

    Improved Real-Time Stability Assessment of Grid-Connected Converters Using MIMO-Identification Methods

    Luhtala, R., Reinikka, T., Roinila, T., Messo, T. & Sihvo, J., 6 Dec 2018, The 10th Annual IEEE Energy Conversion Congress and Exposition (ECCE 2018): September 23 – 27, 2018, Portland, Oregon, USA . IEEE, p. 5322-5329 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  86. Published

    Clustering Analysis for Secondary Breaking Using a Low-Cost Time-of-Flight Camera

    Niu, L., Aref, M. M. & Mattila, J., Nov 2018, 2018 Ninth International Conference on Intelligent Control and Information Processing (ICICIP). IEEE, p. 318-324 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  87. Published

    3D Attitude Calculation for the Grasper of a Crane System with a Rotary Gyroscope

    Zhang, X., Mustalahti, P., Peltola, E. & Mattila, J., Nov 2018, 2018 Ninth International Conference on Intelligent Control and Information Processing (ICICIP). IEEE, p. 229-235 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  88. Published

    Deep Learning of Robotic Manipulator Structures by Convolutional Neural Network

    Aref, M. M. & Mattila, J., Nov 2018, 2018 Ninth International Conference on Intelligent Control and Information Processing (ICICIP). IEEE, p. 236-242 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  89. Published

    Analysis of the Effects of Path Properties on Autonomous Motion Control of a Hydraulic Tracked Vehicle

    Mononen, T., Aref, M. M. & Mattila, J., Nov 2018, 2018 25th International Conference on Mechatronics and Machine Vision in Practice (M2VIP). IEEE, 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  90. Published

    UX 1 system design - A robotic system for underwater mining exploration

    Martins, A., Almeida, J., Almeida, C., Dias, A., Dias, N., Aaltonen, J., Heininen, A., Koskinen, K., Rossi, C., Dominguez, S., Vörös, C., Henley, S., McLoughlin, M., van Moerkerk, H., Tweedie, J., Bodo, B., Zajzon, N. & Silba, E., 5 Oct 2018, 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS): October, 1-5, 2018, Madrid, Spain. IEEE, p. 1494-1500 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  91. Published

    Social capital characteristics in RD project networks

    Majuri, M. & Lanz, M., 4 Oct 2018, 2018 Portland International Conference on Management of Engineering and Technology (PICMET). IEEE, 8481775

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  92. Published

    Learning from Demonstration for Hydraulic Manipulators

    Suomalainen, M., Koivumäki, J., Lampinen, S., Kyrki, V. & Mattila, J., 1 Oct 2018, 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). IEEE, p. 3579-3586 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  93. Published

    Combining Method of Alternating Projections and Augmented Lagrangian for Task Constrained Trajectory Optimization

    Singh, A. K., Ghabcheloo, R., Muller, A. & Pandya, H., 1 Oct 2018, 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). IEEE, p. 7568-7575 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  94. Published

    An application of Cloud Robotics for enhancing the Flexibility of Robotic Cells at Factory Shop Floors

    Hussnain, A., Ferrer, B. R. & Lastra, J. L. M., Oct 2018, IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society. IEEE, p. 2963-2970 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  95. Published

    Experimental investigation of the impact response of novel steelbiocomposite hybrid materials

    Ramakrishnan, K., Hokka, M., Sarlin, E., Kanerva, M., Kouhia, R. & Kuokkala, V-T., 7 Sep 2018, DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading . EDP Sciences, Vol. 183. 6 p. (EPJ WEB OF CONFERENCES).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  96. Published

    Strain rate jump tests on an austenitic stainless steel with a modified tensile Hopkinson split bar

    Vazquez Fernandez, N. I., Isakov, M., Hokka, M. & Kuokkala, V-T., 7 Sep 2018, DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading. EDP Sciences, Vol. 183. (EPJ WEB OF CONFERENCES).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  97. Published

    Mobile robotic spatial odometry by low-cost IMUs: (Inertial Measurement Unit Sensors)

    Zhang, X., Mononen, T., M. Aref, M. & Mattila, J., 30 Aug 2018, 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications (MESA): Oulu, July 2-4, 2018.. Oulu: IEEE, 6 p. 8449209

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  98. Published

    Real-time and Robust Collaborative Robot Motion Control with Microsoft Kinect ® v2

    Teke, B., Lanz, M., Kämäräinen, J-K. & Hietanen, A., 27 Aug 2018, 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018. IEEE, 6 p. 8449156

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  99. Published

    Role-based visualization of industrial IoT-based systems

    Mahmoodpour, M., Lobov, A., Lanz, M., Mäkelä, P. & Rundas, N., 27 Aug 2018, 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018. IEEE, 8 p. 8449183

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  100. Published

    Methods to design optimum heat sink geometries

    Karvinen, R. & Lampio, K., 10 Aug 2018, International Heat Transfer Conference, IHTC-16, August 10-15, 2018, Beijing, China. p. 5041-5048 8 p. IHTC16-23247

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  101. Published

    Dimensional analysis conceptual modeling supporting adaptable reasoning in simulation-based training

    Coatanea, E. & Roca, R., 7 Aug 2018, 2018 13th System of Systems Engineering Conference, SoSE 2018. IEEE, p. 245-252 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  102. Published

    Full-Dynamics-Based Bilateral Teleoperation of Hydraulic Robotic Manipulators

    Lampinen, S., Koivumäki, J. & Mattila, J., Aug 2018, 2018 IEEE 14th International Conference on Automation Science and Engineering (CASE). IEEE, p. 1343-1350 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  103. Published

    An approach for interconnection and unification of state models in discrete manufacturing

    Gruner, S., Schmitt, J., Lobov, A. & Hassan, H., Jul 2018, 2018 IEEE 16th International Conference on Industrial Informatics (INDIN) : Porto, Portugal, 18-20 July 2018. Porto, Portugal: IEEE, p. 565-570 6 p. (IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL INFORMATICS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  104. Published

    Configurator module to integrate different protocols for IoT solution

    Mahmoodpour, M., Lobov, A. & Lanz, M., Jul 2018, 2018 IEEE 16th International Conference on Industrial Informatics (INDIN): 18-20 July 2018, Porto, Portugal. IEEE, p. 67-73 7 p. (IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL INFORMATICS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...13 Next
Download list To download, please limit the number of search results to 1,000 or less.