Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. A4 Article in a conference publication
  2. Published

    Learning logs in product development education

    Juuti, T., Rättyä, K. & Lehtonen, T., 2016, Proceedings of the 18th International Conference on Engineering and Product Design Education: Design Education: Collaboration and Cross-Disciplinarity, E and PDE 2016. Institution of Engineering Designers, The Design Society, p. 296-301 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Vision-based path coordination for multiple mobile robots with four steering wheels using an overhead camera

    Ziaei, Z., Oftadeh, R. & Mattila, J., 1 Jul 2015, IEEE International Conference on Advanced Intelligent Mechatronics (AIM), 2015. p. 261-268 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    High performance wear and corrosion resistant coatings by novel cladding techniques

    Tuominen, J., Näkki, J., Pajukoski, H., Nyyssönen, T., Ristonen, T., Peltola, T. & Vuoristo, P., Jan 2015, Surface Modification Technologies XXVIII: Proceedings of the 28th International Conference on Surface Modification Technologies. Sudarshan, T. S., Vuoristo, P. & Koivuluoto, H. (eds.). Valardocs, p. 105-117 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Analysis of the aircraft operational reliability research series: From statistical models to avionics data monitoring

    Laitinen, J. & Niemi, A., 2015, Proceedings of the 9th World congress on engineering asset management (WCEAM 2014), Pretoria, South Africa 28-31 Oct, 2014. 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Simulation of ash-forming compounds in the kraft recovery boiler

    Leppänen, A., Välimäki, E. & Oksanen, A., 2015, 10th European Conference on Industrial Furnaces and Boilers. Porto, Portugal, 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Anomaly Detection and Diagnostics of a Wheel Loader Using Dynamic Mathematical Model and Joint Probability Distributions

    Krogerus, T., Hyvönen, M., Backas, J. & Huhtala, K., 2015, Proceedings of the Fourteenth Scandinavian International Conference on Fluid Power, SICFP15. May 20-22, 2015. Tampere, Finland. Tampere University of Technology. Department of Intelligent Hydraulics and Automation, 14 p. (The Scandinavian International Conference on Fluid Power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Production planning and control in Finnish manufacturing companies – Current state and challenges

    Järvenpää, E., Lanz, M., Tokola, H., Salonen, T. & Koho, M., 2015, Proceedings of the 25th International Conference on Flexible Automation and Intelligent Manufacturing. 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Sustainability Performance Measurement and Management Model

    Koho, M., Tapaninaho, M., Järvenpää, E., Heilala, J. & Lanz, M., 2015, . Proceedings of the 25th International Conference on Flexible Automation and Intelligent Manufacturing. 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Guidelines for Designing Human-friendly User Interfaces for Factory Floor Manufacturing Operators

    Järvenpää, E. & Lanz, M., 2015, Advances in Production Management Systems: Innovative Production Management Towards Sustainable Growth: IFIP WG 5.7 International Conference, APMS 2015, Tokyo, Japan, September 7-9, 2015, Proceedings, Part II. Springer International Publishing, p. 531-538 8 p. (IFIP Advances in Information and Communication Technology).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Increasing Employee Involvement in Socially Sustainable Manufacturing: Two Methods for Capturing Employees’ Tacit Knowledge to Improve Manufacturing Processes

    Kopra, M-J., Halonen, N., Järvenpää, E. & Lanz, M., 2015, Advances in Production Management Systems: Innovative Production Management Towards Sustainable Growth: IFIP WG 5.7 International Conference, APMS 2015, Tokyo, Japan, September 7-9, 2015, Proceedings, Part II. Springer International Publishing, p. 539-546 8 p. (IFIP Advances in Information and Communication Technology).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Method for Modelling Strategic Capabilities in Small and Medium Sized Enterprises

    Halme, J., Majuri, M., Nylund, H., Kopra, M-J. & Tuokko, R., 2015, Proceedings of the 25th international conference on flexible automation and intelligent manufacturing : FAIM2015, 23rd-26th June, 2015 Wolverhampton, UK. Vol. Vol. 2. p. 132-139 8 p. 130

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Collaborative Innovation Capabilities of SME Network

    Majuri, M., Halme, J., Kopra, M-J. & Nylund, H., 2015, Proceedings of the 25th international conference on flexible automation and intelligent manufacturing: FAIM2015, 23rd-26th June, 2015 Wolverhampton, UK. Vol. Vol. 2. p. 404-409 6 p. 175

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Gain Scheduling Full State Feedback with D-Implementation for Velocity Tracking of Hydrostatic Drive Transmission

    Backas, J., Ghabcheloo, R. & Huhtala, K., 2015, Proceedings of the Fourteenth Scandinavian International Conference on Fluid Power, SICFP15. May 20-22, 2015. Tampere, Finland. Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 64-75 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Roll-to-roll coating by liquid flame spray nanoparticle deposition

    Mäkelä, J. M., Haapanen, J., Aromaa, M., Teisala, H., Tuominen, M., Stepien, M., Saarinen, J. J., Toivakka, M. & Kuusipalo, J., 2015, Materials Research Society Symposium Proceedings. MATERIALS RESEARCH SOCIETY, Vol. 1747. p. 37-42 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Vision-based trajectories planning for four wheels independently steered mobile robots with maximum allowable velocities

    Ziaei, Z., Oftadeh, R. & Mattila, J., 2015, Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). Springer Verlag, Vol. 9287. p. 303-309 7 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 9287).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    A Novel Coaxially Laser-Assisted (COLA) Cold Spray System

    Allen, C., Marrocco, T., McNutt, P., Koivuluoto, H., Latokartano, J., Vuoristo, P. & Olsson, R., 2015, ITSC2015: International Thermal Spray Conference, May 11-14, 2015, Long Beach, California, USA. p. 210-216 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Numerical modelling of rock fracture with the embedded discontinuity approach incorporating heterogeneity

    Saksala, T., 2015, ISRM Congress 2015 Proceedings: Innovations in Applied and Theoretical Rock Mechanics. International Society for Rock Mechanics ISRM, 11 p. 177

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    A new method to calculate natural convection heat transfer from a non-isothermal fin array

    Lampio, K. & Karvinen, R., 2015, Proceedings of the 7th Baltic Heat Transfer Conference, August 24-26 2015, Tallinn Estonia. Neshumayev, D. & Sunden, B. (eds.). Tallinn: Tallinn University of Technology, (Baltic Heat Transfer Conference BHTC).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Brownfield process for the rationalisation of existing product variety towards a modular product family

    Pakkanen, J., Juuti, T. & Lehtonen, T., 2015, ICED 15, vol 7: Product Modularisation, Product Architecture, Systems Engineering, Product Service Systems. Weber, C., Husung, S., Cascini, G., Cantamessa, M., Marjanovic, D. & Rotini, F. (eds.). The Design Society, Vol. 7. 10 p. (International Conference on Engineering Design).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Case study on engineering change management and digital manufacturing

    Leino, S-P., Jokinen, L., Anttila, J-P. & Pulkkinen, A., 2015, IFIP Advances in Information and Communication Technology. Springer New York LLC, Vol. 467. p. 591-600 10 p. (IFIP Advances in Information and Communication Technology; vol. 467).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Energy efficiency evaluation method for machine tools

    Ikkala, K., Lanz, M., Kiviö, J. & Coatanéa, E., 2015, Flexible Automation and Intelligent Manufacturing 2015. The Choir Press, p. 58-65 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Retrofitting digital hydraulics – An analytical study

    Ketonen, M., Linjama, M. & Huhtala, K., 24 Mar 2014, Conference proceedings, 9th International Fluid Power Conference Aachen: Modern Fluid Power - Challenges, Responsibilities, Markets, Vol. 1. Aachen Germany, p. 163 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Production as a key factor for driving competitiveness in manufacturing industry

    Majuri, M., Tapaninaho, M., Tuokko, R. & Torvinen, S., 2014, Proceedings of the 24th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM2014, 20th -23rd May, San Antonio, Texas, USA. Chen, F. F. (ed.). Lancaster, Pennsylvia: DEStech Publications, p. 209-214 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Impacts of making design decision sequence explicit on NPD project in forest machinery company

    Halonen, N., Lehtonen, T. & Juuti, T., 2014, Proceedings of 10th NordDesign 2014 Conference, Espoo, August 27-29, Aalto University. Laakso, M. & Ekman, K. (eds.). Espoo: Aalto Desingn Factory, p. 702-711 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Image Based Local Strain Measurement of Wood

    Moilanen, C. S., Saarenrinne, P., Engberg, B. A. & Björkqvist, T., 2014, Advancement of Optical Methods in Experimental Mechanics Volume 3, Conference Proceedings of the Society for Experimental Mechanics Series. Jin, H., Sciammarella, C., Yoshida, S. & Lamberti, L. (eds.). Berlin: Springer, p. 339-345 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Issue of using students as test users - some findings in VE testing

    Tiainen, T. & Ellman, A., 2014, Proceedings of the DESIGN 2014 13th International design conference, May 19-22, 2014, Dubrovnik - Croatia. Majanovic, D., Storga, M., Pavkovic, N. & Bojcetic, N. (eds.). Croatia: Facalty of Mechanical Engineering and Naval Architecture, University of Zagreb; The Design Society, Glasgow, p. 615-622 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Hydraulic Manipulator Virtual Decomposition Control with Performance Analysis Using Low-Cost MEMS Sensors

    Koivumäki, J., Honkakorpi, J., Vihonen, J. & Mattila, J., 2014, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Besancon, France, July 8-11, 2014. Piscataway, NJ: IEEE, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    A Semi-Fidelity Training Simulator: Promising Opportunities for Student-Centered Learning

    Kaapu, T., Tiainen, T. & Ellman, A., 2014, Proceedings of the 22nd European Conference on Information Systems, ECIS 2014, June 9-11, 2014,Tel Aviv. 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Fuel optimal controller for hydrostatic drives: A simulation study and model validation

    Backas, J., Ghabcheloo, R., Hyvönen, M. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Influence of laser hardening to the sliding wear resistance of the PVD (Al,Ti) N-G and nACo(Registered trademark) coatings

    Surzhenkov, A., Adoberg, E., Antonov, M., Sergejev, F., Mikli, V., Viljus, M., Latokartano, J. & Kulu, P., 2014, 22nd International Baltic Conference on Engineering Materials and Tribology, BALTMATTRIB 2013; Riga Latvia; 14 November 2013 through 15 November 2013. Trans Tech Publications Ltd, p. 28-31 4 p. (Key Engineering Materials; vol. 604).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Electro hydraulic gas exchange valve actuation of 4-stroke large bore diesel engine

    Herranen, M. & Huhtala, K., 2014, 8th FPNI Ph.D Symposium on Fluid Power, FPNI2014, June 11-13, 2014, Lappeenranta, Finland. The American Society of Mechanical Engineers ASME, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Energy efficient outdoor lighting: an implementation

    Farahat, A., Florea, A., Martinez Lastra, J. L., Branas Reyes, C. & Azcondo, F. J., 2014, 2014 IEEE 15th Workshop on Control and Modeling for Power Electronics (COMPEL), 22-25 June 2014, University of Cantabria, Santander, Spain. Piscataway: The Institute of Electrical and Electronics Engineers, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Hopf bifurcation of nonlinear contact force in grinding system

    Yuan, L., Järvenpää, V-M. & Virtanen, S., 2014, Proceedings of the 21st International Congress on Sound and Vibration, In Depth Sound and Vibration Research, 2014, ICSV21, 13-17 July, 2014, Beijing, China. Crocker, M. J., Pawelczyk, M. & Tian, J. (eds.). International Institute of Acoustics and Vibration (IIAV), p. 2445-2452 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Sustainability and Performance Indicators Landscape

    Lanz, M., Järvenpää, E., Nylund, H., Tuokko, R., Torvinen, S. & Georgoulias, K., 2014, Proceedings of the 24th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM2014, 20th -23rd May, San Antonio, Texas, USA. Chen, F. F. (ed.). Lancaster, Pennsylvia: DEStech Publications, p. 283-290 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Simulation Based Methods for Flexible Maintenance Program Development

    Aaltonen, J., Koskinen, K. T., Vainio, H. & Martinsuo, M., 2014, EuroMaintenance 2014, Congress proceedings May 5-7, Helsinki, Finland, 22nd European Congress & Expo on Maintenance and Asset Management, 6th World Congress & Global Forum on Maintenance and Asset Management. European Federation of National Maintenance Societies, p. 446-450 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Image Stitching Based Measurements of Medical Screws

    Cenev, Z., Prusi, T. & Tuokko, R., 2014, Precision Assembly Technologies and Systems. 7th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2014, Chamonix, France, February 16-18, 2014, Revised Selected Papers. Ratchev, S. (ed.). Springer Berlin Heidelberg, p. 69-78 10 p. (IFIP Advances in Information and Communication Technology; vol. 435).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Innovative tool for specifying customer requirements

    Ellman, A., Wendrich, R. & Tiainen, T., 2014, Proceedings of the ASME 2014 International Design and Engineering Technical Conferences & Computers and Information in Engineering Conference IDECT/CIE 2014, August 17-20, 2014, Buffalo, New York, USA. p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Effect of Temperature on Fume Formation and Deposition in Kraft Recovery Boilers - a Modeling Approach

    Leppänen, A., Tran, H., Välimäki, E. & Oksanen, A., 2014, 2014 International Chemical Recovery Conference, Proceedings - Volume 2. Nieminen, M. & Lampinen, P. (eds.). Suomen Soodakattilayhdistys, The Finnish Recovery Boiler Committee; TAPPI, p. 38-47 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Requirements for Manufacturing Operations Management and Control Systems in a Dynamic Environment

    Järvenpää, E., Tokola, H., Salonen, T., Lanz, M., Koho, M. & Tuokko, R., 2014, Proceedings of the 24th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM2014, 20th -23rd May, San Antonio, Texas, USA. Chen, F. F. (ed.). Lancaster, Pennsylvia: DEStech Publications, p. 1135-1142 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Hermetic room temperature glass welding technology

    Lundén, H., Kumpulainen, T., Määttänen, A. & Vihinen, J., 2014, 2014 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2014 June 15-18, 2014, Washington, DC, USA. Nano Science and Technology Institute, p. 13-16 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Analysis of signals and power flow in a digital hydraulic multi actuator application

    Karvonen, M., Heikkilä, M., Linjama, M. & Huhtala, K., 2014, 8th FPNI Ph.D Symposium on Fluid Power, FPNI2014, June 11-13, 2014, Lappeenranta, Finland. The American Society of Mechanical Engineers ASME, p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Analysis of Real-Time Properties of a Digital Hydraulic Power Management System

    Boström, P., Alexeev, P., Heikkilä, M., Huova, M., Waldén, M. & Linjama, M., 2014, 19th International Conference, FMICS 2014, Florence, Italy, September 11-12, 2014.. Springer International Publishing, p. 33-47 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Assistive Obstacle-Free Path Planning in the Image Space for Teleoperation Tasks Using Monocular Camera

    Ziaei, Z., Oftadeh, R. & Mattila, J., 2014, 18th International Conference on System Theory, Control and Computing, ICSTCC 2014, October 17-19, 2014, Sinaia, Romania. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 838-844 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Comparison of proportional control and displacement control using digital hydraulic power management system

    Heikkilä, M., Karvonen, M., Linjama, M., Tikkanen, S. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    A Continuum damage model for quasi-brittle materials

    Yaghoubi, S. T., Kouhia, R., Hartikainen, J. & Kolari, K., 2014, Proceedings of NSCM-27: the 27th Mechanics Nordic Seminar on Computational Mechanics. Eriksson, A., Kulachenko, A., Mihaescu, M. & Tibert, G. (eds.). Stockholm: KTH Mechanics, p. 160-163 4 p. (TRITA-MEK Technical report; no. 24).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Model-based development in the domain of mobile machines

    Jouppila, V., Kaapu, T., Sjöstedt, C-J., Ellman, A. & Chen, D-J., 2014, Digital proceedings of the tenth International Symposium on Tools and Methods of Competitive Engineering - TMCE 2014, May 19-23, Budapest, Hungary. Horvath, I. & Rusak, Z. (eds.). Delft: Delft University of Technology, p. 759-772 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Dynamics of ice milling and breaking during arctic ship steering operations

    Keskinen, E., Montonen, J., Sharma, N. & Cotsaftis, M., 2014, Proceedings of the ASME 2014, 12th Biennial Conference on Engineering Systems Design and Analysis, ESDA2014, June 25-27, 2014, Copenhagen, Denmark. The American Society of Mechanical Engineers ASME, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    A case study of share of ICT infrastructure in energy consumption of discrete manufacturing facility

    Sohail, M., Florea, A. & Martinez Lastra, J. L., 2014, 2014 IEEE 15th Workshop on Control and Modeling for Power Electronics (COMPEL), 22-25 Junen 2014, University of Cantabria, Santander, Spain. Piscataway: The Institute of Electrical and Electronics Engineers IEEE, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Concerns over students role as test users in virtual environments

    Tiainen, T. & Ellman, A., 2014, Proceedings of the 18th Academic MindTrek Conference 2014 "Media business, management, content & services" 4-6 November, 2014, Tampere, Finland. Lugmayr, A., Franssila, H. & Paavilainen, J. (eds.). New York, NY: The Association for Computing Machinery, p. 11-18 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    Novel glass welding technique for hermetic encapsulation

    Lundén, H., Kumpulainen, T., Määttänen, A. & Vihinen, J., 2014, 5th Electronics System-Integration Technology Conference, ESTC 2014, September 16-18, 2014, Helsinki, Finland. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  52. Published

    Product life cycle disposition model

    Halonen, N., Lehtonen, T., Pakkanen, J., Juuti, T., Ellman, A. & Riitahuhta, A., 2014, Proceedings of the DESIGN 2014 13th International Design Conference , May 19-22, 2014, Dubrovnik - Croatia. Majanovic, D., Storga, M., Pavkovic, N. & Bojcetic, N. (eds.). Croatia: The Design Society, p. 831-840 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  53. Published

    Performance of a pump controlled asymmetric actuator: A comparison of different control methods

    Kukkonen, S. & Mäkinen, E., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  54. Published

    Prediction of drive torque in hydraulic wheel loader

    Ahopelto, M. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  55. Published

    Knowledge-based web service integration for industrial automation

    Ramis Ferrer, F. D. B., Gonzalez Moctezuma, L. E., Iarovyi, S., Lobov, A., Martinez Lastra, J. L., Vyatkin, V. & Dai, W., 2014, Proceedings 2014 12th IEEE International Conference on Industrial Informatics (INDIN), Porto Alegre, RS, Brazil, 27-30 July, 2014. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 733 - 739 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  56. Published

    Novel Procedure for Supporting Maintenance of Mobile Work Machines Using R&D Simulators

    Hietala, J-P., Krogerus, T., Multanen, P., Hyvönen, M. & Huhtala, K., 2014, The Eleventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM2014 / MFPT2014, 10-12 June 2014, Manchester, UK. The British Institute of Non-Destructive Testing, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  57. Published

    High Performance Particle Tracking Velocimetry for Fluidized Beds

    Elfvengren, J., Kolehmainen, J. & Saarenrinne, P., 2014, VISAPP 2014, Proceedings of the 9th International Conference on Computer Vision Theory and Applications , Volume 3, Lisbon, Portugal, 5-8 January, 2014. Battiato, S. & Braz, J. (eds.). SCITEPRESS, p. 441-449 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  58. Published

    Developed measuring methods for hydraulic fluid dynamics and viscosity at extreme pressures and temperatures

    Karjalainen, J-P., Karjalainen, R. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  59. Published

    Design reasoning patterns in NPD education design

    Juuti, T., Lehtonen, T., Rättyä, K., Halonen, N., Vanhatalo, M. & Kujansuu, P., 2014, Proceedings of 16th International Conference on Engineering and Product Design Education, University of Twente, Enschede, The Netherlands 4th-5th September 2014. Bohemia, E., Eger, A., Eggink, W., Kovacevic, A., Parkinson, B. & Wits, W. (eds.). The Design Society, p. 682-687 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  60. Published

    Local compression behaviour of pre-fatigued and chemically pre-treated wood at high strain rate and high temperature

    Moilanen, C., Engberg, B. A. K., Björkqvist, T., Salminen, L. & Saarenrinne, P., 2014, International Mechanical Pulping Conference, IMPC 2014, 2-5 June 2014, Helsinki, Finland, PULPAPER 2014, 3-5 June, 2014, Helsinki, Finland. AEL, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  61. Published

    Aspects of the energy consumption of a digital hydraulic power management system supplying a digital and proportional valve controlled multi actuator system

    Karvonen, M., Heikkilä, M., Tikkanen, S., Linjama, M. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  62. Published

    Geometry-Aided Low-Noise Angular Velocity Sensing of Rigid-Body Manipulator Using MEMS Rate Gyros and Linear Accelerometers

    Vihonen, J., Honkakorpi, J., Koivumäki, J., Mattila, J. & Visa, A., 2014, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Besancon, France, July 8-11, 2014. Piscataway, NJ: IEEE, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  63. Published

    A Macro-Micro Controller for Pallet Picking by an Articulated-frame-steering Hydraulic Mobile Machine

    M. Aref, M., Ghabcheloo, R. & Mattila, J., 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA), May 31 - June 7, 2014, Hong Kong, China. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 6816-6822 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  64. Published

    Constrained Path Optimization with Bézier Curve Primitives

    Choi, J-W. & Huhtala, K., 2014, 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2014), September 14-18, 2014, Palmer House Hilton, Chicago, IL, USA. Institute of Electrical and Electronics Engineers IEEE, p. 246-251 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  65. Published

    Delay excited vibrations in grinding wheel rotor system

    Järvenpää, V-M. & Yuan, L., 2014, Proceedings of the 21st International Congress on Sound and Vibration, In Depth Sound and Vibration Research 2014, ICSV21, 13-17 July, 2014, Beijing, China. Crocker, M. J., Pawelczyk, M. & Tian, J. (eds.). International Institute of Acoustics and Vibration (IIAV), p. 2437-2444 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  66. Published

    Mechatronic design of digital hydraulic micro valve package

    Linjama, M., Paloniitty, M., Tiainen, L. & Huhtala, K., 2014, The Second International Conference on Dynamics and Vibroacoustics of Machines, September 15-17, 2014, Samara, Russia. p. 610-617 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  67. Published

    Global Path Planning with Obstacle Avoidance for Omnidirectional Mobile Robot Using Overhead Camera

    Ziaei, Z., Oftadeh, R. & Mattila, J., 2014, 2014 IEEE International Conference on Mechatronics and Automation, ICMA 2014, Tianjin, China, August 3-6, 2014. Piscataway, NJ: IEEE, p. 697-704 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  68. Published

    Application of Design Review to Probabilistic Risk Assessment in a Large Investment Project

    Virtanen, S., Penttinen, J-P., Kiiski, M. & Jokinen, J., 2014, Proceedings of the Probabilistic Safety Assessment and Management PSAM12, June 2014, Honolulu, Hawaii. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  69. Published

    Time Optimal Path Following with Bounded Velocities and Accelerations for Mobile Robots with Independently Steerable Wheels

    Oftadeh, R., Ghabcheloo, R. & Mattila, J., 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA), May 31 - June 7, 2014, Hong Kong, China. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 2925-2931 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  70. Published

    PTV and PIV based dispersed phase velocity measurements in a pseudo-2D turbulent fluidized bed

    Kolehmainen, J., Elfvengren, J., Ylönen, M., Saarenrinne, P., Kallio, S. & Peltola, J., 2014, Proceedings of the International Conference on Heat Transfer and Fluid Flow, (HTFF´14), Prague, Czech Republic, August 11-12, 2014. Avestia Publishing, International ASET, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  71. Published

    Verification and Validation of a Pressure Control Unit for Hydraulic Systems

    Boström, P., Heikkilä, M., Huova, M., Waldén, M. & Linjama, M., 2014, 6th International Workshop, SERENE 2014, Budapest, Hungary, October 15-16, 2014. Springer International Publishing, p. 101-115 15 p. (Lecture Notes in Computer Science; vol. 8785).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  72. Published

    Equal coded digital hydraulic valve system - improving tracking control with pulse frequency modulation

    Paloniitty, M., Linjama, M. & Huhtala, K., 2014, The Second International Conference on Dynamics and Vibroacoustics of Machines, September 15-17, 2014, Samara, Russia. p. 618-626 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  73. Published

    Inkjet printed nano-particle Cu process for fabrication of re-distribution layers on silicon wafer

    Soltani, A., Kumpulainen, T. & Mäntysalo, M., 2014, 2014 IEEE 64th Electronic Components and Technology Conference (ECTC), 27-30 May 2014, Orlando, FL. Institute of Electrical and Electronics Engineers IEEE, p. 1685-1689 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  74. Published

    Easurement of solids velocity and concentration in a large cold CFB model

    Peltola, J., Karvonen, L., Elfvengren, J., Kolehmainen, J., Kallio, S., Pallares, D. & Johnsson, F., 2014, CFB-11: Proceedings of the 11th International Conference on Fluidized Bed Technology, Beijing, China, 14-17 May 2014. p. 589-594

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  75. Published

    Parallel pump-controlled multi-chamber cylinder

    Niemi-Pynttäri, O., Linjama, M., Laamanen, A. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  76. Published

    Jet pump performance in liquid and gas pumping

    Mikkonen, A. & Karvinen, R., 2014, MFIP13, 13th International conference on multiphase flow in industrial plants, Mediterrean Foundation, Sestri Levante (Genova), Italy, 17-19 September 2014. Genova: Italian association of industrial plant enginnering; University of Genova Polytechnic school; Iltalian association of chemical engineering, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  77. Published

    Technical cleanliness of assembled fluid power components

    Elo, L., Pekkonen, J. & Rinkinen, J., 2014, 8th FPNI Ph.D Symposium on Fluid Power, FPNI2014, June 11-13, 2014, Lappeenranta, Finland. The American Society of Mechanical Engineers ASME, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  78. Published

    Geometry-Aided Inversion of Manipulator Telescopic Link Length from MEMS Accelerometer and Rate Gyro Readings

    Vihonen, J., Honkakorpi, J., Mattila, J. & Visa, A., 2014, 2014 IEEE International Conference on Robotics & Automation (ICRA) Hong Kong Convention and Exhibition Center, May 31 - June 7, 2014. Hong Kong, China. Institute of Electrical and Electronics Engineers IEEE, p. 181-186 6 p. (IEEE International Conference on Robotics & Automation (ICRA)).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  79. Published

    Surface Processing of Zirconia Ceramics by Laser

    Kumpulainen, T., Ismailov, A., Hyvärinen, L., Levänen, E. & Vihinen, J., 2014, Proceedings of the Twenty Eighth International Conference on Surface Modification Technologies. p. 275-284 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  80. Published

    Design driven world of cellulose-from bulk to luxury?

    Qvintus, P., Kataja, K., Heikkilä, P., Salmela, J., Lehmonen, J., Ketoja, J., Hänninen, T., Harlin, A., Härkäsalmi, T., Vuorinen, J. & Vuorinen, T., 2014, Fibre Value Chain Conference and Expo 2014: Pulp and Paper Bioenergy Bioproducts. Appita Inc., p. 67-74 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  81. Published

    Modeling of Age-Dependent Failure Tendency from Incomplete Data

    Hagmark, P. & Laitinen, J., 2014, Engineering Asset Management 2011: Proceedings of the Sixth World Congress on Engineering Asset Management. Lee, J., Ni, J., Sarangapani, J. & Mathew, J. (eds.). London: Springer-Verlag London Limited, p. 449-459 11 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  82. Published

    Geometry-Aided MEMS Motion State Estimation for Multi-Body Manipulators

    Vihonen, J., Honkakorpi, J., Mattila, J. & Visa, A., 2013, 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2013, Mechatronics for Human Wellbeing, July 9-12, 2013, Wollongong, Australia. Institute of Electrical and Electronics Engineers IEEE, p. 341-347 7 p. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  83. Published

    Smart lighting in multipurpose outdoor environments: energy efficient solution using network of cooperating objects

    Florea, A., Farahat, A., Postelnicu, C., Martinez Lastra, J. L. & Azcondo Sanchez, F. J., 2013, Proceedings of 4th international workshop on networks of cooperating objects for smart cities 2013 (CONET/UBICITEC 2013), Philadelphia, USA, April 8, 2013. Fortino, G., Karnouskos, S., Marron, P. J. & Martinez Lastra, J. L. (eds.). CEUR-WS.org, p. 1-13 13 p. (CEUR Workshop Proceedings; vol. 1002).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  84. Published

    Hydraulic Energy Recovery in Displacement Controlled Digital Hydraulic System

    Heikkilä, M. & Linjama, M., 2013, Proceedings of the 13th Scandinavian International Conference on Fluid Power, 3-5 June, Linköping, Sweden. Scandinavian International Conference on Fluid Power, p. 1-7 7 p. (Scandinavian International Conference on Fluid Power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  85. Published

    A Novel Time Optimal Path Following Controller with Bounded Velocities for Mobile Robots with Independently Steerable Wheels

    Oftadeh, R., Ghabcheloo, R. & Mattila, J., 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) November 3-7, 2013, Tokyo, Japan. Institute of Electrical and Electronics Engineers IEEE, p. 4845-4851 7 p. (IEEE/RSJ International Conference on Intelligent Robots and Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  86. Published

    Stable and high performance energy-efficient motion control of electric load sensing controlled hydraulic manipulators

    Koivumäki, J. & Mattila, J., 2013, Proceedings of ASME/BATH 2013 Symposium on Fluid Power and Motion Control, FPMC2013, October 6-9, 2013, Sarasota, Florida. Sarasota, Florida, USA: ASME, p. 1-10 10 p. (Symposium on Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  87. Published

    Micro-electromechanical System Sensors in Unscented Kalman Filter-based Condition Monitoring of Hydraulic Systems

    Nurmi, J., Honkakorpi, J., Vihonen, J. & Mattila, J., 2013, 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, July 9-12, 2013, Wollongong, Australia, AIM 2013 Conference Digest, Mechatronics for Human Wellbeing. IEEE; ASME, p. 354-361 (IEEE/ASME International Conference on Advanced Intelligent Mechatronics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  88. Published

    Capability of the turret punch press process: Intelligence between design and manufacturing

    Lohtander, M., Järvenpää, E. & Varis, J., 2013, 2013 IEEE International Symposium of Assembly and Manufacturing (ISAM), July 30th – Aug 2nd 2013, Xi’an, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 180-182 3 p. (International Symposium on Assembly and Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  89. Published

    Comparison of low-and high-fidelity approach in model based design in the case of a portable motion platform

    Ellman, A. U., Krus, P. & Jouppila, V., 2013, Proceedings of the 19th International Conference on Engineering Design, ICED13, Design for Harmonies, Vol 9: Design Methods and Tools, 19th-22nd August 2013, Sungkyunkwan University, Seoul, Korea. Lindemann, U., Venkataraman, S., Kim, Y. S., Lee, S. W., Papalambros, P. & Chen, W. (eds.). Scotland: The Design Society, p. 227-236 10 p. (International Conference on Engineering Design).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  90. Published

    Case study on the relation of PLM maturity, architecture and business processes

    Pulkkinen, A., Vainio, V. & Rissanen, N., 2013, Product Lifecycle Management for Society, Proceedings of 10th IFIP WG 5.1 International conference, PLM 2013, Nantes, France, July 6-10, 2013,. Bernard, A., Rivest, L. & Dutta, D. (eds.). Berlin: Springer, p. 432-438 7 p. (IFIP Advances in Information and Communication Technology; vol. 409).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  91. Published

    Impacts of Product Lifecycle and Production System Design on Competitive and Sustainable Production

    Nylund, H., Tapaninaho, M., Torvinen, S. & Andersson, P. H., 2013, 23rd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 13, The challenge of sustaining global competitive manufacturing systems, 26-28 June 2013 Porto Portugal, Advances in Sustainable and Competitive Manufacturing Systems. Azevedo, A. (ed.). Switzerland: Springer International Publishing, p. 3-13 11 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  92. Published

    Detection and isolation of faults in mobile hydraulic valves based on a reduced-order model and adaptive thresholds

    Nurmi, J. & Mattila, J., 2013, Proceedings of ASME/BATH 2013 Symposium on Fluid Power and Motion Control, FPMC2013, October 6-9, 2013, Sarasota, Florida. Sarasota, Florida, USA: ASME, p. 1-10 10 p. (Symposium on Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  93. Published

    Social Media in Manufacturing: Just Hype or Concrete Benefits?

    Lanz, M. & Torvinen, S., 2013, 23rd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 13, The challenge of sustaining global competitive manufacturing system, 26-28 June 2013 Porto Portugal, Advances in Sustainable and Competitive Manufacturing Systems. Azevedo, A. (ed.). Switzerland: Springer International Publishing, p. 1023-1034 (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  94. Published

    A New technique for torsional vibration measurements with digital image correlation

    Hasanen, M., Saarenrinne, P. & Kokko, V., 2013, The 26th International Congress of Condition Monitoring and Diagnostic Engineering Management, COMADEM 2013, 11-13 June, Helsinki. 6 p. (International Congress of Condition Monitoring and Diagnostic Engineering Management).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  95. Published

    An Energy-Efficient High Performance Motion Control of a Hydraulic Crane Applying Virtual Decomposition Control

    Koivumäki, J. & Mattila, J., 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) November 3-7, 2013, Tokyo, Japan. Institute of Electrical and Electronics Engineers IEEE, p. 4426-4433 8 p. (IEEE/RSJ International Conference on Intelligent Robots and Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  96. Published

    Decision support tool for retrofitting a district towards district as a service

    Florea, A., Postelnicu, C., Martinez Lastra, J. L., Larranaga, M., Marquez Contreras, J. A., Presser, M., Plambech, T., Colino, A. & Bayona Pons, V. M., 2013, Conference booklet, IECON 2013, 39th Annual Conference of the IEEE Industrial Electronics Society in conjunction with IWIES 2013: 1st International workshop on intelligent energy systems, Austria Center, Vienna, Austria, 10-14 November 2013. Piscataway, NJ: Institute of Electrical and Electronics Engineers, IEEE, p. 70-75 6 p. (Annual Conference of the IEEE Industrial Electronics Society).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  97. Published

    Mechatronic design of a four wheel steering mobile robot with fault-tolerant odometry feedback

    Oftadeh, R., Aref, M. M., Ghabcheloo, R. & Mattila, J., 2013, The 6th IFAC Symposium on Mechatronic Systems, IFAC MECH2013, April 10-12, 2013, Zhejiang University, Hangzhou, China. p. 663-669 7 p. (Elsevier IFAC Publications / IFAC Proceedings series).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  98. Published

    Semantic information management for user and context aware smart home with social services

    Evchina, Y., Dvoryanchikova, A. & Martinez Lastra, J. L., 2013, 3rd IEEE International Multi-Disciplinary Conference on Cognitive Methods in Situation Awareness and Decision Support (CogSIMA), February 26-28, 2013, San Diego, CA, USA. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 262-268 7 p. (International Multi-Disciplinary Conference on Cognitive Methods in Situation Awareness and Decision Support).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  99. Published

    Energy Efficiency of Digital Hydraulic Valve Control Systems

    Huova, M., Linjama, M. & Huhtala, K., 2013, SAE 2013 Commercial Vehicle Engineering Congress (COMVEC), October 1-3, 2013, Rosemont, Illinois, USA. 13 p. (SAE Technical Papers).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  100. Published

    An approach for OSGi and DPWS interoperability: bridning enterprise application with shop-floor

    Iarovyi, S., Garcia, J. & Martinez Lastra, J. L., 2013, Proceedings 2013 11the IEEE international conference on industrial informatics INDIN, Bochum, Germany, July 29-31, 2013. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 200-205 6 p. (IEEE international conference on industrial informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  101. Published

    TUT-Microfactory – A small-size, modular and sustainable production system

    Järvenpää, E., Heikkilä, R. & Tuokko, R., 2013, Proceedings of 11th Global Conference on Sustainable Manufacturing GCSM - Innovative Solutions, Berlin, Germany, 23rd-25th September, 2013. Seliger, G. (ed.). Berlin: Technische Universität Berlin, p. 79-84 6 p. (Global Conference on Sustainable Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...13 Next
Download list To download, please limit the number of search results to 1,000 or less.