Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. A4 Article in a conference publication
  2. Published

    Experimental results in Component Cleanliness of Fluid Power

    Rinkinen, J., Elo, L., Kuosku, M. & Pekkonen, J., 2013, The 26th International Congress of Condition Monitoring and Diagnostic Engineering Management, COMADEM 2013, 11-13 June, Helsinki. 8 p. (International Congress of Condition Monitoring and Diagnostic Engineering Management).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Information Flows and Design Intent in the Core of Future Product-Services in the Field of Manufacturing Industry

    Lanz, M., Järvenpää, E. & Andersson, P., 2013, 5th International conference on advanced design and manufacture, 25-28 September 2013, Valencia, Spain. Su, D. & Zhu, S. (eds.). Trans Tech Publications, p. 103-106 4 p. (Key Engineering Materials; vol. 572).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Capability-based ontological resource model and rules for describing and assigning resources in sheet metal manufacturing

    Järvenpää, E., Lohtander, M. & Tuokko, R., 2013, 2013 IEEE International Symposium of Assembly and Manufacturing (ISAM), July 30th – Aug 2nd 2013, Xi’an, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 105-108 3 p. (International Symposium on Assembly and Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Combined Virtual Iron Bird and Hardware-in-the-Loop Simulation Research Environment for Jet Fighter Hydraulic Systems

    Alarotu, V., Aaltonen, J., Koskinen, K. T. & Siitonen, M., 2013, Proceedings of the 4th CEAS Conference in Linköping, 2013. Melin, T., Krus, P., Vinterhav, E. & Övrebö, K. (eds.). Linköping: Linköping University Electronic Press, p. 196-202 7 p. (International Conference of the European Aerospace Societies; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Concept of product development simulator for an excavator using a haptic device

    El Dirdiry, O. & Ellman, A., 2013, Proceedings of the 19th International Conference on Engineering Design, ICED13, Design for Harmonies, Vol 9: Design Methods and Tools, 19th-22nd August 2013, Sungkyunkwan University, Seoul, Korea. Lindemann, U., Venkataraman, S., Yong, S., Lee, S. W., Papalambros, P. & Chen, W. (eds.). Scotland: The Design Society, p. 031-038 8 p. (International Conference on Engineering Design).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Enhancement of industrial monitoring systems by utilizing context awareness

    Nieto Lee, A. & Martinez Lastra, J. L., 2013, 3rd IEEE International Multi-Disciplinary Conference on Cognitive Methods in Situation Awareness and Decision Support (CogSIMA), February 26-28, 2013, San Diego, CA, USA. Piscataway: Institute of Electrical and Electronics Engineers, IEEE, p. 277-284 8 p. (IEEE International Multi-Disciplinary Conference on Cognitive Methods in Situation Awareness and Decision Support).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Assessment of IEC-61499 and CDL for function block composition in factory-wide system integration

    Ramis, B., Garcia, J. & Martinez Lastra, J. L., 2013, Proceedings 2013 IEEE international conference on industrial informatics INDIN, Bochum, Germany, July 29-31, 2013. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 212-217 6 p. (IEEE international conference on industrial informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Real-Time Service-Oriented Architectures: A Data-Centric Implementation for Distributed and Heterogeneous Robotic System

    Alho, P. & Mattila, J., 2013, Proceedings of the 4th IFIP TC 10 International Embedded Systems Symposium, IESS 2013, Paderborn, Germany, June 2013.. Schirner, G., Götz, M., Rettberg, A., Zanella, M. C. & Rammig, F. J. (eds.). Springer, p. 262-271 10 p. (IFIP Advances in Information and Communication Technology; vol. 403).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Modeling of Tangential Vibrations in Cylindrical Grinding Contact with Regenerative Chatter

    Järvenpää, V-M., Yuan, L., Kalbasi Shirvani, H. & Mehmood, F., 2013, Surveillance 7 - International conference, Institute of Technology of Chartres, France, October 29-30, 2013. 10 p. (International Conference Surveillance).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Aircraft Hydraulic Fluid On-Line Condition Monitoring System for Maintenance and Troubleshooting Purposes

    Alarotu, V., Aaltonen, J., Koskinen, K. T. & Siitonen, M., 2013, Proceedings of the 4th CEAS Conference in Linköping, 2013. Melin, T., Krus, P., Vinterhav, E. & Övrebö, K. (eds.). Linköping: Linköping University Electronic Press, p. 188-195 8 p. (International Conference of the European Aerospace Societies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Fatigue properties of laser clad round steel bars

    Tuominen, J., Näkki, J., Poutala, J., Miettinen, J., Peltola, T., Vuoristo, P., Rasehorn, I., Alam, M. & Kaplan, A., 2013, Proceedings of 32nd International Congress on Applications of Lasers & Electro-Optics ICALEO, October 6-10, 2013, Miami, FL, USA. Laser Institute of America, p. 998-1007 10 p. P140. (International Congress on Applications of Lasers and Electro-Optics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Grid Resolution and Time Step Studies in the Case of URANS Simulation of a Cyclone Separator

    Karvinen, A. & Ahlstedt, H., 2013, The 7th Open Source CFD International Conference 2013, 24-25 October, Hamburg, Germany. p. 1-10 10 p. (Open Source CFD International Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    MEMS-based State Feedback Control of Multi-Body Hydraulic Manipulator

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), November 3-7, 2013, Tokyo, Japan. Institute of Electrical and Electronics Engineers IEEE, p. 4419-4425 7 p. (IEEE/RSJ International Conference on Intelligent Robots and Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Hydraulics for High Inertia, Heavy Load Lifting Application - Comparing Different Options

    Kukkonen, S. & Mäkinen, E., 2013, The 8th International Conference on Fluid Power Transmission and Control, ICFP 2013, April 9-11, 2013, Zhejiang University, Hangzhou, China. Yongxiang, L., Qingfeng, W., Bingfeng, J. & Jun, Z. (eds.). p. 176-180 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Sliding wear of HVOF sprayed self-fluxing alloy matrix cermet particles reinforced composite coatings

    Surzhenkov, A., Antonov, M., Mikli, V., Latokartano, J., Vilgo, T. & Kulu, P., 2013, BALTTRIB´2013, VII International scientific conference, Aleksandras Stulginskis University, Kaunas, Lithuania, 14-15 November 2013. Padgurskas, J., Rukuiza, R., Kreivaitis, R. & Jankauskas, V. (eds.). p. 62-66 5 p. (Proceedings of the international conference BALTTRIB).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Open Automation of Manufacturing Systems through Integration of Ontology and Web Services

    Garetti, M., Fumagalli, L., Lobov, A. & Martinez Lastra, J. L., 2013, 7th IFAC Conference on manufacturing modelling, management and control, June 19-21, 2013. Saint Petersburg, Russia. Bakhtadze, N., Chernyshov, K., Dolgui, A. & Lototsky, V. (eds.). International Federation of Automatic Control, p. 198-203 6 p. (Elsevier IFAC Publications / IFAC Proceedings series; vol. 7).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Pro-active content managing system for efficient human machine interaction in data intensive environments

    Nieto Lee, A. N., Evchina, Y., Dvoryanchikova, A. & Martinez Lastra, J. L., 2013, Proceedings 2013 11th IEEE international conference on industrial informatics INDIN, Bochum, Germany, July 29-31, 2013. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 790-796 6 p. (IEEE international conference on industrial informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Computer-Assisted Bilateral Teleoperation System for Water Hydraulic Manipulator

    Viinikainen, M., Mattila, J. & Tuominen, J., 2013, The 8th International Conference on Fluid Power Transmission and Control, ICFP 2013, April 9-11, 2013, Zhejiang University, Hangzhou, China. Yongxiang, L., Qingfeng, W., Bingfeng, J. & Jun, Z. (eds.). p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Inverse Monitoring of Loading State with Output Measurements

    Dospel, V., Prokop, A., Ojala, P. & Miettinen, J., 2013, The 26th International Congress of Condition Monitoring and Diagnostic Engineering Management, COMADEM 2013, 11-13 June, Helsinki. p. 1-8 8 p. (International Congress of Condition Monitoring and Diagnostic Engineering Management).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Fault-tolerant scheduling of stateful tasks in uniprocessor real-time systems

    Alexeev, P., Boström, P., Walden, M., Huova, M., Linjama, M. & Sere, K., 2013, 3rd International Conference on Pervasive Embedded Computing and Communication Systems, PECCS 2013, Barcelona, Spain, 19.-21.2.2013. Benavente-Peces, C. & Filipe, J. (eds.). SCITEPRESS, p. 189-194 6 p. (International Conference on Pervasive Embedded Computing and Communication Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    A genetic algorithm for optimizing vector-based paths of industrial manipulators

    Gonzalez Moctezuma, L. E., Nieto Lee, A. & Martinez Lastra, J. L., 2013, INDIN 2013, IEEE international conference on industrial informatics, Bochum, Germany, July 29-31, 2013. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 286-292 8 p. (IEEE international conference on industrial informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    An extended second order polynomial model for hydraulic fluid density

    Karjalainen, J. P., Karjalainen, R. & Huhtala, K., 2013, Proceedings of the ASME/BATH 2013 Symposium on Fluid Power and Motion Control, FPMC2013, October 6-9, 2013, Sarasota, Florida. Sarasota, Florida, USA: ASME, p. 1-8 8 p. (Symposium on Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Process for Evaluation and Validation of Non-Original Components for Aircraft Hydraulic Systems

    Aaltonen, J., Alarotu, V., Koskinen, K. T. & Siitonen, M., 2013, Proceedings of the 4th CEAS Conference in Linköping, 2013. Melin, T., Krus, P., Vinterhav, E. & Övrebö, K. (eds.). Linköping: Linköping University Electronic Press, p. 693-699 7 p. (International Conference of the European Aerospace Societies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Remote Handling Control System for Water Hydraulic Mover

    Tuominen, J. & Mattila, J., 2013, The 8th International Conference on Fluid Power Transmission and Control, ICFP 2013, April 9-11, 2013, Zhejiang University, Hangzhou, China. Yongxiang, L., Qingfeng, W., Bingfeng, J. & Jun, Z. (eds.). p. 387-391 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Dynamic Modeling and Simulation of a Cylindrical Grinder in Presence of Non-linear Friction Effect

    Kalbasi Shirvani, H., Järvenpää, V-M. & Yuan, L., 2013, Proceedings in Research Conference in Technical Disciplines, RCITD 2013, 18.-22. November 2013, Slovak Republic. Mokrys, M., Badura, S. & Lieskovsky, A. (eds.). Zilina: EDIS, p. 47-52 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Capability-Based Adaptation of Production Systems - Practical Case Study in TUT-Microfactory Environment

    Järvenpää, E., Lanz, M. & Tuokko, R., 2013, 5th International conference on advanced design and manufacture, 25-28 September 2013, Valencia, Spain. Su, D. & Zhu, S. (eds.). Trans Tech Publications, p. 245-248 4 p. (Key Engineering Materials; vol. 572).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    New energy efficient solutions to mobile machines

    Huhtala, K., Ahopelto, M., Heikkilä, M., Backas, J., Tammisto, J., Huova, M. & Linjama, M., 2013, The 8th International Conference on Fluid Power Transmission and Control, ICFP 2013, April 9-11, 2013, Zhejiang University, Hangzhou, China. Yongxiang, L., Qingfeng, W., Bingfeng, J. & Jun, Z. (eds.). p. 38-52 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Optimal geometry of single fins and fin arrays

    Lindstedt, M. & Karvinen, R., 2013, Eurotherm Seminar No 96, Convective Heat Transfer Enhancement 17-18 September 2013, Royal Military Academy, Brussels, Belgium. Ecole Royale Militaire; von Karman Insitute for fluid dynamics; Universite de Valenciennes et du Hainaut-Cambresis, p. 1-6 6 p. 33

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    A positive tensions PID controller for a planar cable robot: An experimental study

    Khosravi, M. A., Taghirad, H. D. & Oftadeh, R., 2013, 2013 1st RSI/ISM International Conference on Robotics and Mechatronics, ICRoM 2013, Tehran, Iran, 13.-15.2.2013. p. 325-330 6 p. (International Conference on Robotics and Mechatronics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Product strategies in merchant ship and airliner industries

    Lehtinen, J., Lehtonen, T., Pakkanen, J. & Riitahuhta, A., 2013, Proceedings of the 19th International Conference on Engineering Design, ICED 13, Design for Harmonies, Vol 3: Design Organisation and Management, 19th-22nd August 2013, Sungkyunkwan University, Seoul, Korea. Lindemann, U., Venkataraman, S., Kim, Y. S., Lee, S. W., de Weck, O. & Hong, Y. S. (eds.). Scotland: The Design Society, p. 201-210 10 p. (International Conference on Engineering Design).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Stability Analysis of Two Time Delays in Cylindrical Grinding Machine by D-subdivion Method

    Mehmood, F., Yuan, L., Järvenpää, V-M. & Heshmatimanesh, F., 2013, Proceedings in Research Conference in Technical Disciplines, RCITD 2013, 18.-22. November 2013, Slovak Republic. Mokrys, M., Badura, S. & Lieskovsky, A. (eds.). Zilina: EDIS, p. 53-57 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Dynamic simulation of dependability of nickel reduction plant

    Penttilä, J. & Ikonen, V., 2013, Proceedings fo the ASEM 2013 International Mechanical Engineering Congress and Exposition, IMECE 2013, November 15-21, 2013, San Diego, California, USA. ASME, p. 1-7 7 p. 64308. (ASME International Mechanical Engineerig Congress and Exposition).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Recognition of Operating States of a Medium-Sized Mobile Machine

    Krogerus, T., Hyvönen, M., Raivio, K. & Huhtala, K., 2013, Proceedings of the 13th Scandinavian International Conference on Fluid Power, 3-5 June, Linköping, Sweden. p. 1-10 10 p. (Scandinavian International Conference on Fluid Power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Agent-based control of operational conditions for smart factories: the peak load management scenario

    Florea, A., Lauttamus, J., Postelnicu, C. & Martinez Lastra, J. L., 2013, Industrial applications of holonic and multi-agent systems, Proceedings of 6th international conference, HoloMAS 2013, Prague, Czech Repulic, August 26-28, 2013. Marik, V., Martinez Lastra, J. L. & Skobelev, P. (eds.). Berlin: Springer, p. 83-94 (Lecture Notes in Computer Science; vol. 8062).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Aligning product design methods and tools for sustainability

    Nahkala, S., 2013, Proceedings of the 20th CIRP, International Conference on life cycle engineering, Singapore, 17-19 April, 2013. Nee, A. Y. C., Song, B. & Ong, S-K. (eds.). Springer Singapore, p. 53-58 6 p. (Re-engineering manufacturing for sustainability).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Maintaining a dynamic view of semantic web services representing factory automation systems

    Puttonen, J., Lobov, A. & Martinez Lastra, J. L., 2013, IEEE 20th International Conference on Web Services June 27-July 2, 2013, Santa Clara Marriott, CA, USA. O´Connor, L. (ed.). Los Alamitos, CA: Institute of Electrical and Electronics Engineers, p. 419-426 8 p. (IEEE international conference on web services).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Improved energy efficiency and controllability of mobile work machines by reduced engine rotational speed

    Ahopelto, M., Backas, J., Ghabcheloo, R. & Huhtala, K., 2013, Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition, IMECE2013, November 15-21, 2013, San Diego, California, USA. ASME, p. 1-8 8 p. 64239. (ASME International Mechanical Engineerig Congress and Exposition).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Retrospective study on teaching engineering design and product development

    Lehtonen, T., Juuti, T., Rättyä, K. & Vanhatalo, M., 2013, E&PDE 2013, the 15th international conference on engineering and product design education, Design education - Growing our future, Dublin, Ireland, 5-6 September, 2013. Bohemia, E., Ion, W., Kovacevic, A., Lawlor, J., McGrath, M., McMahon, C., Parkinson, B., Reilly, G., Ring, M., Simpson, R. & Tormey, D. (eds.). Glasgow: The Design Society, Institution of Engineering Designers, p. 414-419 6 p. (International Conference on Engineering and Product Design Education).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    A builder for adaptable human machine interfaces for mobile devices

    Neira, O., Nieto Lee, A., Martinez Lastra, J. L. & Camp, R. S., 2013, Proceedings 2013 11the IEEE international conference on industrial informatics INDIN, Bochum, Germany, July 29-31, 2013. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 750-755 6 p. (IEEE international conference on industrial informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    URB-Grade: Plataforma software para la ayuda a la toma de decisiones correctoras de eficiencia energetica

    Larranaga Negro, M., Martinez Lastra, J. L., Colino, A. & Marquez Contreras, J. A., 2013, III Congreso de servicios energeticos, ESES comunicaciones, Bilbao, 1 y 2 octubre 2013, Palacio Euskalduna. Editorial tecnica el instaldor, p. 291-296 6 p. (Congreso de servicios energeticos).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Experiences of Online Measurements in Technical Cleanliness of Fluid Power System

    Elo, L., Pekkonen, J. & Rinkinen, J., 2013, The Tenth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM2013/MFPT2013, 18-20 June 2013, Krakow, Poland. Coxmoor Publishing, p. 1-9 9 p. (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Dynamics of single-hit pneumatic test drill for pulse-shaping analysis of impacting waves

    Montonen, J., Keskinen, E., Cotsaftis, M., Miettinen, J. & Seemann, W., 2013, Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition, IMECE2013, November 15-21, 2013, San Diego, California, USA. ASME, p. 1-7 7 p. 64835. (ASME International Mechanical Engineerig Congress and Exposition).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Internal leakage fault detection for variable displacement axial piston pump

    Kivelä, T. & Mattila, J., 2013, Proceedings of ASME/BATH 2013 Symposium on Fluid Power and Motion Control, FPMC2013, October 6-9, 2013, Sarasota, Florida. p. 1-9 9 p. (Symposium on Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Advanced concepts for flexible data integration in heterogeneous production environments

    Dennert, A., Garcia Izaguirre Montemayor, J., Krause, J., Hesse, S., Martinez Lastra, J. L. & Wollschlaeger, M., 2013, 11th IFAC Workshop on intelligent manufacturing systems, The international federation of automatic control, May 22-24, 2013. São Paulo, Brazil. Tsuzuki, M. D. S. G. & José, R. (eds.). International Federation of Automatic Control IFAC, p. 348-353 6 p. (Elsevier IFAC Publications / IFAC Proceedings series; vol. 11).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Mems sensor network based anti-sway control system for articulated hydraulic crane

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2013, Proceedings of ASME/BATH 2013 Symposium on Fluid Power and Motion Control, FPMC2013, October 6-9, 2013, Sarasota, Florida. p. 1-9 9 p. (Symposium on Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Value of virtual prototyping - a strategic resource besed view

    Leino, S-P. S., Koivisto, T. & Riitahuhta, A., 2013, Proceedings of The 19th International Conference on Engineering Design ICED13, Design for Harmonies, Vol 4: Product, Service and Systems Design, 19th-22nd August 2013 Sungkyunkwan University Seoul, Korea. Lindemann, U., Venkataraman, S., Kim, Y. S., Lee, S. W., de Weck, O. & Hong, Y. S. (eds.). Scotland: The Design Society, p. 249-258 10 p. (International Conference on Engineering Design).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Current research in component cleanliness of fluid power

    Rinkinen, J., Elo, L., Kuosku, M. & Pekkonen, J., 2013, The Tenth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM2013/MFPT2013, 18-20 June 2013, Krakow, Poland. Coxmoor Publishing, 17 p. (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Generic Microcontroller Board for Automated Heavy Machinery with Modular Control System

    Karhu, O. & Huhtala, K., 2013, SAE 2013 Commercial Vehicle Engineering Congress (COMVEC), October 1-3, 2013, Rosemont, Illinois, USA. SAE, p. 1-7 7 p. 2013-01-2386. (SAE Technical Papers).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Sustainability performance indicators for supporting the realization of sustainable and energy-efficient manufacturing

    Tapaninaho, M., Koho, M., Nylund, H., Heilala, J. & Torvinen, S., 2013, 23rd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 13, The challenge of sustaining global competitive manufacturing system, 26-28 June 2013 Porto Portugal, Advances in Sustainable and Competitive Manufacturing Systems. Azevedo, A. (ed.). Springer International Publishing, p. 1677-1688 12 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    Early design verification of ITER remote handling systems using Digital Mock-Ups within simulation lifecycle environment

    Sibois, R., Määttä, T., Siuko, M. & Mattila, J., 2013, 2013 IEEE 25th Symposium on Fusion Engineering, SOFE 2013, San Francisco, CA, USA, 10.-14.6.2013. Institute of Electrical and Electronics Engineers IEEE, p. 1-6 6 p. (IEEE Symposium on Fusion Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  52. Published

    Bounded-Velocity Motion Control of Four Wheel Steered Mobile Robots

    Oftadeh, R., Aref, M. M., Ghabcheloo, R. & Mattila, J., 2013, 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2013, Mechatronics for Human Wellbeing, July 9-12, 2013, Wollongong, Australia. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 255-260 6 p. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  53. Published

    Evaluating the confidence level of prognostic predictions

    Lumme, V. & Pylvänen, M., 2012, 2012 IEEE Conference on Prognostics and Health Management PHM, 18-21 June 2012, Denver, CO, USA. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 1-6 6 p. (IEEE International Conference on Prognostics and Health Management).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  54. Published

    A flexible laser micro-machining platform

    Vihinen, J., Latokartano, J. & Kumpulainen, T., 2012, Proceedings of The 8th International Workshop on Microfactories, IWMF 2012, 18-20 June, 2012, Tampere Hall, Tampere, Finland. Reijo, T., Minna, L. & Pasi, L. (eds.). Tampere: Tampere University of Technology, p. 1-6 6 p. (International Workshop on MicroFactories).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  55. Published

    Laminated manifold for digital hydraulics - principles, challenges and benefits

    Paloniitty, M., Karvonen, M., Linjama, M. & Tiainen, T., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intellidgent Hydraulics and Automation, p. 27-42 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  56. Published

    Real time surface tracking system in laser microprocessing

    Hautala, V., Määttänen, A. & Vihinen, J., 2012, Proceedings of the 31st International Congress on Applications of Lasers & Electro-optics, ICALEO 2012, 23-27 September, 2012, Anaheim, California, USA. Laser Institute of America, p. 983-990 M1102. (International Congress on Applications of Lasers & Electro-optics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  57. Published

    Rakenteen vasteiden estimointi metamallien avulla

    Halonen, L. & Pajunen, S., 2012, Proceedings of the 11th Finnish Mechanics Days. XI Suomen Mekaniikkapäivät Oulun yliopisto 29.-30.11.2012. Koivurova, H. & Malaska, M. (eds.). Oulu: Oulun yliopisto, p. 77-82 (Finnish Mechanics Days. Suomen Mekaniikkapäivät).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  58. Published

    Fundamentals of Digital Microhydraulic

    Linjama, M., 2012, Proceedings of the 8th International Fluid Power Conference, Dresden, March 26-28, 2012. Dresden: Technische Universität Dresden, Institute of Fluid Power, p. 385-396 (International Fluid Power Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  59. Published

    Applicability of market-based competition models for energy efficient factory automation systems

    Postelnicu, C. & Martinez Lastra, J. L., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 326-330 (IEEE International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  60. Published

    A co-creation tool in walk-in virtual environment: making prospective work visible

    Tiainen, T., Kaapu, T., Ellman, A. & Kuusisto, J., 2012, Proceedings of the European Conference for Information Systems ECIS 2012, June 10-13, 2012 ESADE, Barcelona, Spain. p. 1-11 11 p. Paper 43. (European Conference on Information Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  61. Published

    A cross-layer approach to energy management in manufacturing

    Florea, A., Garcia Izaguirre Montemayor, J. A., Postelnicu, C. & Martinez Lastra, J. L., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 304-308 (IEEE International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  62. Published

    Free shape paths in industrial robots

    Gonzalez Moctezuma, L. E., Lobov, A. & Martinez Lastra, J. L., 2012, Proceedings of the 38th Annual Conference of the IEEE Industrial Electronics Society, IECON 2012, 25-28 October, 2012, Montreal, Quebec, Canada. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 3739-3743 (Annual Conference of the IEEE Industrial Electronics Society).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  63. Published

    Implementation of a digital hydraulic valve system with Bosch Rexroth sec valves

    Ketonen, M., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 161-174 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  64. Published

    Embedded service oriented diagnostics based on energy consumption

    Postelnicu, C., Khajehzadeh, N. & Martinez Lastra, J. L., 2012, Proceedings of 2012 IEEE 6th International Conference on Information and Automation for Sustainability, ICIAFS 2012, 27-29 September, 2012, Beijing, China. Piscataway, NJ: IEEE, p. 42-46 (International Conference on Information and Automation for Sustainability).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  65. Published

    Evaluation of the teaching of a simple theory through different teaching disciplines

    Saarenrinne, P., 2012, ICERI2012 Proceedings, 5th International Conference of Education, Research and Innovation 19.-21.11.2012, Madrid, Spain. Barcelona: International Association of Technology, Education and Development IATED, p. 939-942 (International Conference of Education, Research and Innovation).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  66. Published

    Two thermodynamically consistent formulations of strain-rate dependent ductile-to-brittle transition model

    Hartikainen, J., Kolari, K., Kouhia, R. & Yaghoubi, S. T., 2012, Proceedings of the 11th Finnish Mechanics Days. XI Suomen Mekaniikkapäivät, Oulun yliopisto 29.-30.11.2012. Hannu, K. & Mikko, M. (eds.). Oulu: Oulun yliopisto, p. 185-190 (Finnish Mechanics Days. Suomen Mekaniikkapäivät).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  67. Published

    Simulations with fault-tolerant controller software of a digital valve

    Huova, M., Ketonen, M., Alexeev, P., Boström, P., Linjama, M., Walden, M. & Sere, K., 2012, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 223-242 (Digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  68. Published

    An open energy consumption-relevant factory automation dataset in the cloud

    Zhang, B., Postelnicu, C., Jokinen, J. & Martinez Lastra, J. L., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 792-797 (IEEE International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  69. Published

    Capturing the flows of the product process

    Pakkanen, J., Becker, I., Lehtonen, T. & Juuti, T., 2012, The 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Dorian, M., Mario, S., Neven, P. & Nenad, B. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, p. 1557-1566 (International Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  70. Published

    Supporting manufacturing companies on utilizing environmental performance metrics

    Nylund, H., Tapaninaho, M., Kirman, B., Koho, M. & Torvinen, S., 2012, The 10th Global Conference on Sustainable Manufacturing, GCSM 2012, 31 October - 2 November, 2012, Istanbul, Turkey. Seliger, G. & Kylyc, S. E. (eds.). GCSM, p. 582-587 (Global Conference on Sustainable Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  71. Published

    A Potential Field and Bug Compound Navigation Algorithm for Nonholonomic Wheeled Robots

    Choi, J-W., 2012, ICIES2012, The 1st International Conference on Innovative Engineering, 7-9 December 2012, Alexandria, Egypt,. Institute of Electrical and Electronics Engineers IEEE, p. 166-171 6 p. (International Conference on Innovative Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  72. Published

    Reliability management in conceptual design - experiences from two practical cases

    Valkokari, P., Ahonen, T., Jännes, J., Välisalo, T. & Ellman, A., 2012, Proceedings of 11the International Probabilistic Safety Assessment and Management Conference & The Annual European Safety and Reliability Conference (PSAM11, ESREL 2012), Helsinki 25-29 June 2012. Red Hook, NY: Curran Associates, p. 1085-1093 (International Probabilistic Safety Assessment and Management Conference & The Annual European Safety and Reliability Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  73. Published

    A device configuration management tool for context-aware system

    Kuutti, A., Dvoryanchikova, A., Lobov, A., Martinez Lastra, J. L. & Vahtera, T., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 10-15 (IEEE International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  74. Published

    State of the art of virtual engineering based human-machine system lifecycle knowledge transfer and management

    Leino, S-P. & Riitahuhta, A., 2012, Proceedings of the 9th International Symposium on Tools and Methods of Competitive Engineering, TMCE 2012, 7-11 May, 2012, Karlsruhe, Germany. Imre, H., Zoltan, R., Albert, A. & Mathias, B. (eds.). Delft, Netherlands: Delft University of Technology, p. 573-585 (International Symposium on Tools and Methods of Competitive Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  75. Published

    Ecosystem oriented energy management: an implementation

    Florea, A., Postelnicu, C., Zhang, B. & Martinez Lastra, J. L., 2012, Proceedings of 2012 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2012, October 14-17 2012, COEX, Seoul, Korea. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 912-918 (IEEE International Conference on Systems, Man, and Cybernetics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  76. Published

    Design-optimization of cylindrical, layered composite structures using efficient laminate parameterization

    Mönicke, A., Katajisto, H., Leroy, M., Petermann, N., Kere, P. & Perillo, M., 2012, 12th European Conference on Spacecraft Structures, Materials and Environmental Testing, Noordwijk, the Netherlands, 20-23 March, 2012. ESA SP. European Space Agency, p. 1-6 6 p. (ESA - SP; vol. 691).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  77. Published

    Unified Framework for Rapid Prototyping of Linux based Real-Time Controllers with Matlab and Simulink

    Oftadeh, R., Aref, M. M., Ghabcheloo, R. & Mattila, J., 2012, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2012, Ambassador Hotel, July 11-14, Kaohsiung, Taiwan. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 274 - 279 (IEEE/ASME International Conference on Advanced Intelligent Mechatronics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  78. Published

    Effect of oil viscosity on filter performance in lubrication oil system

    Heiskanen, V., Mäkelä, T., Kapanen, P. & Rinkinen, J., 2012, Proceedings of the 11th World Filtration Congress & Exhibition, WFC11, April 16-20, 2012, Graz, Austria. Vienna, Austria: Gesellschaft Österreichischer Chemiker GÖCH, p. 1-15 15 p. (World Filtration Congress).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  79. Published

    Retrofitting a factory automation system to address market needs and societal changes

    Gonzalez Moctezuma, L. E., Jokinen, J., Postelnicu, C. & Martinez Lastra, J. L., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 413-418 (IEEE International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  80. Published

    Comparison of five low cost manipulators for microfactories

    Siltala, N., Vuola, A., Prusi, T., Heikkilä, R. & Tuokko, R., 2012, Proceedings of the 8th International Workshop on Microfactories, IWMF 2012, 18-20 June, 2012, Tampere Hall, Tampere, Finland. Reijo, T., Minna, L. & Pasi, L. (eds.). Tampere: Tampere University of Technology, p. 1-8 8 p. (International Workshop on MicroFactories).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  81. Published

    Safety monitoring system for a manufacturing workstation using Web Service Technologies

    Karipireddy, P., Vidales, A., Jokinen, J. & Martinez Lastra, J. L., 2012, Proceedings of IEEE International Conference on Industrial Technology, IEEE-ICIT'12, 19-21 March, 2012, Athens, Greece. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 800-805 (IEEE International Conference on Industrial Technology).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  82. Published

    Improving energy efficiency and productivity of existing hydraulic systems by retrofittable digital hydraulics

    Ketonen, M., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 63-66 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  83. Published

    Applications and business models for micro and desktop production systems

    Nurmi, A., Heikkilä, R. & Tuokko, R., 2012, Proceedings of the 8th International Workshop on Microfactories, IWMF 2012, 18-20 June, 2012, Tampere Hall, Tampere, Finland. Reijo, T., Minna, L. & Pasi, L. (eds.). Tampere: Tampere University of Technology, p. 1-10 10 p. (International Workshop on MicroFactories).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  84. Published

    A Framework of design for procurement

    Pulkkinen, A., Martikainen, A. & Kuusela, J., 2012, Proceedings of the 18th International Conference on Engineering, Technology and Innovation 2012, ICE 2012, 18-20 June 2012, Munich, Germany. Bernhard, K., Thomas, H., Klaus, S. & Klaus-Dieter, T. (eds.). Munich: Strascheg Center for Entrepreneurship SCE at the Munich University of Applied Sciences (MUAS), p. 307-316 (International Conference on Engineering, Technology and Innovation).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  85. Published

    Digital Hydraulic Cylinder Drive For Folding Cargo Hatches

    Westerlund, S. & Mäkinen, E., 2012, Proceedings of the 7th FPNI PhD Symposium on Fluid Power, University of Modena and Reggio Emilia, June 27-30, 2012, Reggio Emilia, Italy. Milani, M., Montorsi, L. & Paltrinieri, F. (eds.). Fluid Power Net International, p. 235-248 (Fluid Power Net International PhD Symposium; vol. 7).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  86. Published

    Improvement of Quality of tempered Glass with Numerical Modeling

    Aronen, A. & Karvinen, R., 2012, Challenging Glass 3, Conference on Architectural and Structural Applications of Glass, 28-29 June 2012, Delft, The Netherlands. Bos, F., Louter, C., Nijsse, R. & Veer, F. (eds.). Amsterdam, The Netherlands: IOS Press, p. 363-372 (Conference on Architectural and Structural Applications of Glass).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  87. Published

    Enhancement of security in the hierarchy model of control and automation by applying single sign-on approach for web services

    Jafary, P., Lobov, A. & Martinez Lastra, J. L., 2012, Proceedings of 10th International Conference on ICT and Knowledge Engineering, 21-23 November, 2012, Siam University, Bangkok, Thailand. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 252-259 (International Conference on ICT and Knowledge Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  88. Published

    Tempering of thin glass

    Aronen, A. & Karvinen, R., 2012, Glass. Facade. Energy. Engineered transparency; International conference at glasstec, 25.10.2012 - 26.10.2012, Dusseldorf, Germany. Schneider, J. & Weller, B. (eds.). Technische Universität Darmstadt; Technische Univärsität Dresden; www.engineered-transparency.eu, p. 145-153 (Engineered transparency).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  89. Published

    Key performance indicators for energy efficient asset management in a factory automation testbed

    Zhang, B., Postelnicu, C. & Martinez Lastra, J. L., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 391-396 (International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  90. Published

    On the procedures for critical point computations in solid and structural mechanics

    Feodoroff, A., Kouhia, R., Mäkinen, J. & Tuma, M., 2012, Proceedings of the 11th Finnish Mechanics Days. XI Suomen Mekaniikkapäivät, Oulun yliopisto 29.-30.11.2012. Hannu, K. & Mikko, M. (eds.). Oulu: Oulun yliopisto, p. 95-100 (Finnish Mechanics Days. Suomen Mekaniikkapäivät).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  91. Published

    Flexible gripper system for small optical assemblies - final tests and findings

    Prusi, T., Heikkilä, R., Ha, T. H., Song, J. Y., Lee, C. W. & Tuokko, R., 2012, Precision assembly technologies and systems. Proceedings of the 6th IFIP WG 5.5 International precision assembly seminar, IPAS 2012, 12-14 February, 2012, Chamonix, France. Svetan, R. (ed.). Heidelberg: Springer, p. 55-64 (IFIP Advances in Information and Communication Technology; vol. 371).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  92. Published

    Accuracy measurements of miniature robot using optical CMM

    Vuola, A. & Tuokko, R., 2012, Precision assembly technologies and systems. Proceedings of the 6th IFIP WG 5.5 International precision assembly seminar, IPAS 2012, 12-14 February, 2012, Chamonix, France. Svetan, R. (ed.). Heidelberg: Springer, p. 126-133 (IFIP Advances in Information and Communication Technology; vol. 371).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  93. Published

    Improving manufacturing process sustainability and performance with technology change

    Koho, M., Kirman, B., Tapaninaho, M., Nylund, H. & Torvinen, S., 2012, The 10th Global Conference on Sustainable Manufacturing, GCSM 2012, 31 October - 2 November, 2012, Istanbul, Turkey. Seliger, G. & Kylyc, S. E. (eds.). GCSM, p. 754-758 (Global Conference on Sustainable Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  94. Published

    Yksinkertainen J2-plastisuus-vauriomalli metalleille

    Saksala, T., 2012, Proceedings of the 11th Finnish Mechanics Days. XI Suomen Mekaniikkapäivät, Oulun yliopisto 29.-30.11.2012. Hannu, K. & Mikko, M. (eds.). Oulu: Oulun yliopisto, p. 177-182 (Finnish Mechanics Days. Suomen Mekaniikkapäivät).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  95. Published

    Learning experience of a simple theory through different learning styles

    Saarenrinne, P., 2012, EDULEARN12 Proceedings, 4th International Conference on Education and New Learning Technologies, 2-4 July, 2012, Barcelona, Spain. Gomez Chova, L., Candel Torres, I. & Lopez Martinez, A. (eds.). International Association of Technology, Education andDevelopment IATED, p. 7653-7656 (International Conference on Education and New Learning Technologies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  96. Published

    Non-parametric bootstrap confidence limits for age-dependent failure tendency using incomplete data

    Hagmark, P-E. & Laitinen, J., 2012, 7th World Congress on Engineering Asset Management, WCEAM, Towards Integration and Interoperability, October 8-9 Daejeon Convention Center, Daejeon, Republic of Korea. Daejeon: Korea Engineering Asset Management Association, p. 1-8 8 p. (World Congress on Engineering Asset Management).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  97. Published

    Ontological framework of context-aware and reasoning middleware for smart homes with health and social services

    Evchina, Y., Dvoryanchikova, A. & Martinez Lastra, J. L., 2012, Proceedings of 2012 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2012, 14-17 October, 2012, COEX, Seoul, Korea. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 985-990 (IEEE International Conference on Systems, Man, and Cybernetics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  98. Published

    Risk management in product recovery: need for a framework in risk assessment, mitigation and elimination

    Tapaninaho, M., Bernstein, W. Z., Ramanujan, D., Koho, M. & Torvinen, S., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Production Engineering, p. 961-968 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  99. Published

    Achieving integrated product and production development with knowledge creation and flow model

    Lehtonen, T., Pakkanen, J., Juuti, T., Vanhatalo, M. & Becker, I., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Production Engineering, p. 357-364 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  100. Published

    Semantic Top-Down Modeling of Mechatronics Systems for Sustainable Product Data and Lifecycle Management

    Nykänen, O., Koskinen, K. T., Ranta, P., Salonen, J., Rokala, M., Helminen, M., Nurmi, J., Sairiala, H., Alarotu, V., Aaltonen, J. & Pohjolainen, S., 2012, The 13th Mechatronics Forum International Conference. Proceedings Vol. 3/3. September 17-19 2012, Linz, Austria.. Scheidl, R. & Jacoby, B. (eds.). Linz, Austria: Austrian Center of Competence in Mechatronics (ACCM), p. 792-799 (Mechatronics Forum International Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  101. Published

    Detection of abnormal energy patterns pointing to gradual conveyor misalignment in a factory automation testbed

    Khajehzadeh, N., Postelnicu, C. & Martinez Lastra, J. L., 2012, Proceedings of 2012 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2012, 14-17 October, 2012, COEX, Seoul, Korea. Piscataway, NJ: IEEE, p. 1225-1229 (International Conference on Systems, Man, and Cybernetics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1...3 4 5 6 7 8 9 10 ...13 Next
Download list To download, please limit the number of search results to 1,000 or less.