Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. A1 Journal article-refereed
  2. Published

    Soft robotic gripper with compliant cell stacks for industrial part handling

    Netzev, M., Angleraud, A. & Pieters, R., 1 Oct 2020, In : IEEE Robotics and Automation Letters. 5, 4, p. 6821-6828 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    EHL/mixed transition of fully formulated environmentally acceptable gear oils

    Bayat, R. & Lehtovaara, A., 2020, In : Tribology International. 146, 12 p., 106158.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    On the Kachanov-Rabotnov continuum damage model

    Askes, H., Hartikainen, J., Kolari, K., Kouhia, R., Saksala, T. & Vilppo, J., 2020, In : Rakenteiden mekaniikka. 53, 2, p. 125-144 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Processing map for controlling microstructure and unraveling various deformation mechanisms during hot working of CoCrFeMnNi high entropy alloy

    Patnamsetty, M., Somani, M. C., Ghosh, S., Ahmed, S. & Peura, P., 2020, In : Materials Science and Engineering A. 793, 17 p., 139840.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    A concept for defining the mixed-mode behaviour of tough epoxy film adhesives by single specimen design

    Jokinen, J., Orell, O., Wallin, M. & Kanerva, M., 2020, In : Journal of Adhesion Science and Technology. 34, 18, p. 1982-1999 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Comparative energy analysis of a load sensing system and a zonal hydraulics for a 9-tonne excavator

    Casoli, P., Scolari, F., Minav, T. & Rundo, M., 2020, In : Actuators. 9, 2, 19 p., 39.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    Avoiding the high friction peak in fretting contact

    Juoksukangas, J., Hintikka, J., Lehtovaara, A., Mäntylä, A., Vaara, J. & Frondelius, T., 2020, In : Rakenteiden Mekaniikka. 53, 1, p. 12-19 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    FEM-based wear simulation for fretting contacts

    Mäntylä, A., Juoksukangas, J., Hintikka, J., Frondelius, T. & Lehtovaara, A., 2020, In : Rakenteiden Mekaniikka. 53, 1, p. 20-27 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Separating the impact of work environment and machine operation on harvester performance

    Melander, L. & Ritala, R., 2020, In : EUROPEAN JOURNAL OF FOREST RESEARCH. 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Analyses of criticality for multiple-site delaminations in the flap spar of Finnish F/A-18 aircraft

    Jokinen, J., Kanerva, M., Wallin, M. & Saarela, O., 2020, In : AERONAUTICAL JOURNAL.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Implementation of capability matchmaking software facilitating faster production system design and reconfiguration planning

    Järvenpää, E., Siltala, N., Hylli, O. & Lanz, M., Oct 2019, In : Journal of Manufacturing Systems. 53, p. 261-270 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Shedding frequency in cavitation erosion evolution tracking

    Ylönen, M., Franc, J. P., Miettinen, J., Saarenrinne, P. & Fivel, M., 1 Sep 2019, In : International Journal of Multiphase Flow. 118, p. 141-149 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Heat management for water-hydraulic systems at ITER remote handling

    Väyrynen, J., Aha, L., Mattila, J., Esqué, S. & Sharratt, R., Sep 2019, In : Fusion Engineering and Design. 146, p. 2314-2318 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Servo valve endurance test for water-hydraulic systems in ITER-relevant conditions

    Aha, L., Väyrynen, J., Tammisto, J., Mattila, J., Esqué, S. & Sharratt, R., Sep 2019, In : Fusion Engineering and Design. 146, p. 2523 - 2526

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Digital valve system for ITER remote handling – Design and prototype testing

    Siivonen, L., Paloniitty, M., Linjama, M., Sairiala, H. & Esqué, S., Sep 2019, In : Fusion Engineering and Design. 146, p. 1637 - 1641

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Characterization of cracks formed in large flat-on-flat fretting contact

    Juoksukangas, J., Nurmi, V., Hintikka, J., Vippola, M., Lehtovaara, A., Mäntylä, A., Vaara, J. & Frondelius, T., Jul 2019, In : International Journal of Fatigue. 124, p. 361-370 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Adiabatic Heating of Austenitic Stainless Steels at Different Strain Rates

    Vazquez-Fernandez, N. I., Soares, G. C., Smith, J. L., Seidt, J. D., Isakov, M., Gilat, A., Kuokkala, V. T. & Hokka, M., 20 Jun 2019, In : Journal of Dynamic Behavior of Materials. 5, 3, p. 221-229 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Mass balance control of crushing circuits

    Itävuo, P., Hulthén, E., Yahyaei, M. & Vilkko, M., May 2019, In : Minerals Engineering. 135, p. 37-47 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Employing Knowledge on Causal Relationship to Assist Multidisciplinary Design Optimization

    Wu, D., Coatanea, E. & Wang, G. G., Apr 2019, In : Journal of Mechanical Design, Transactions of the ASME. 141, 4, 041402.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    Nonlinear model predictive energy management of hydrostatic drive transmissions

    Backas, J. & Ghabcheloo, R., 1 Mar 2019, In : Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. 233, 3, p. 335-347

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    An open modelling approach for availability and reliability of systems

    Penttinen, J-P., Niemi, A., Gutleber, J., Koskinen, K., Coatanea, E. & Laitinen, J., Mar 2019, In : Reliability Engineering and System Safety. 183, p. 387-399 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    A novel method of vibration modes selection for improving accuracy of frequency-based damage detection

    Pan, J., Zhang, Z., Wu, J., Ramakrishnan, K. & Singh, H. K., 15 Feb 2019, In : Composites Part B : Engineering. 159, p. 437-446 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    The development of an ontology for describing the capabilities of manufacturing resources

    Järvenpää, E., Siltala, N., Hylli, O. & Lanz, M., Feb 2019, In : Journal of Intelligent Manufacturing. 30, 2, p. 959-978 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Knowledge-based optimization of artificial neural network topology for additive manufacturing process modeling: a case study for fused deposition modeling: A new approach and case study for fused deposition modeling

    Nagarajan, H. P. N., Mokhtarian, H., Jafarian, H., Dimassi, S., Bakrani Balani, S., Hamedi, A., Coatanea, E., Wang, G. G. & Kari R., H., Feb 2019, In : Journal of Mechanical Design. 141, 2

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Why social sustainability counts: The impact of corporate social sustainability culture on financial success

    Schönborn, G., Berlin, C., Pinzone, M., Hanisch, C., Georgoulias, K. & Lanz, M., 1 Jan 2019, In : Sustainable Production and Consumption. 17, p. 1-10 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Microstructure-property relationships of novel ultra-high strength press hardening steels

    Järvinen, H., Honkanen, M., Oja, O., Järvenpää, M. & Peura, P., 2019, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50, 2, p. 816-836 21 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    Customized dimensional analysis conceptual modelling framework for design optimization—a case study on the cross-flow micro turbine model

    Woldemariam, E. T., Coatanéa, E., Wang, G. G., Lemu, H. G. & Wu, D., 2019, In : Engineering Optimization. 51, 7, p. 1168-1184

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    Running-in effects on friction of journal bearings under slow sliding speeds

    Linjamaa, A., Lehtovaara, A., Kallio, M. & Léger, A., 2019, In : Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    Path-Following Controller for 4WDs Hydraulic Heavy-Duty Field Robots with Nonlinear Internal Dynamics

    Liikanen, H., Aref, M. M., Oftadeh, R. & Mattila, J., 2019, In : IFAC-PapersOnLine. 52, 8, p. 375 - 380

    Research output: Contribution to journalArticleScientificpeer-review

  31. E-pub ahead of print

    Estimation of Cavitation Pit Distributions by Acoustic Emission

    Ylönen, M., Saarenrinne, P., Miettinen, J., Franc, J-P., Fivel, M. & Laakso, J., 2019, In : JOURNAL OF HYDRAULIC ENGINEERING: ASCE. 146, 2, 11 p., 04019064.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    Methodology for implementing universal gripping solution for robot application

    Azim, M. S., Lobov, A. & Pastukhov, A., 2019, In : Proceedings of the Estonian Academy of Sciences. 68, 4, p. 413-420 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    Variable speed drive with hydraulic boost

    Linjama, M., 2019, In : International Journal of Fluid Power. 20, 1, p. 99-123 25 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    Identifying and addressing challenges in the engineering design of modular systems – case studies in the manufacturing industry

    Pakkanen, J., Juuti, T. & Lehtonen, T., 29 Nov 2018, In : Journal of Engineering Design. 30 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Cavitation erosion resistance assessment and comparison of three francis turbine runner materials

    Ylönen, M., Saarenrinne, P., Miettinen, J., Franc, J-P., Fivel, M. & Nyyssönen, T., 26 Oct 2018, In : Materials Performance and Characterization. 7, 5, p. 1107-1126 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    Utilizing SPIN rules to infer the parameters for combined capabilities of aggregated manufacturing resources

    Järvenpää, E., Hylli, O., Siltala, N. & Lanz, M., Sep 2018, In : IFAC-PapersOnLine. 51, 11, p. 84-89 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    An executable capability concept in formal resource descriptions

    Siltala, N., Järvenpää, E. & Lanz, M., Sep 2018, In : IFAC-PapersOnLine. 51, 11, p. 102-107 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    Experimental and numerical study of wall layer development in a tribocharged fluidized bed

    Sippola, P., Kolehmainen, J., Ozel, A., Liu, X., Saarenrinne, P. & Sundaresan, S., 25 Aug 2018, In : Journal of Fluid Mechanics. 849, p. 860-884 25 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    Problematics of friction in a high-speed rubber-wheel wear test system: A case study of irregularly rough steel in water lubricated contact

    Ismailov, A., Järveläinen, M. & Levänen, E., 15 Aug 2018, In : Wear. 408-409, p. 65-71

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    High surface quality welding of aluminum using adjustable ring-mode fiber laser

    Maina, M. R., Okamoto, Y., Okada, A., Närhi, M., Kangastupa, J. & Vihinen, J., 1 Aug 2018, In : Journal of Materials Processing Technology. 258, p. 180-188 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    A new method to optimize natural convection heat sinks

    Lampio, K. & Karvinen, R., Aug 2018, In : Heat and Mass Transfer/Waerme- und Stoffuebertragung. 54, 8, p. 2571-2580

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Impact loading history modulates hip fracture load and location: A finite element simulation study of the proximal femur in female athletes

    Abe, S., Narra Girish, N., Nikander, R., Hyttinen, J., Kouhia, R. & Sievänen, H., 25 Jul 2018, In : Journal of Biomechanics. 76, p. 136-143 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  43. Published

    Vibration-based assessment of delaminations in FRP composite plates

    Zhang, Z., He, M., Liu, A., Singh, H. K., Ramakrishnan, K. R., Hui, D., Shankar, K. & Morozov, E., 1 Jul 2018, In : Composites Part B : Engineering. 144, p. 254-266 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    Value proposition of a resource description concept in a production automation domain

    Siltala, N., Järvenpää, E. & Lanz, M., 27 Jun 2018, In : Procedia CIRP. 72, p. 1106-1111 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Published

    A performance evaluation concept for production systems in an SME network

    Mahmood, K., Lanz, M., Toivonen, V. & Otto, T., 27 Jun 2018, In : Procedia CIRP. 72, p. 603-608 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Product Model ontology and its use in capability-based matchmaking

    Järvenpää, E., Siltala, N., Hylli, O. & Lanz, M., 27 Jun 2018, In : Procedia CIRP. 72, p. 1094-1099

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Gap Formation During Cyclic Testing of Flexor Tendon Repair

    Linnanmäki, L., Göransson, H., Havulinna, J., Sippola, P., Karjalainen, T. & Leppänen, O. V., Jun 2018, In : Journal of Hand Surgery. 43, 6, p. 570.e1-570.e8

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    A conceptual design and modeling framework for integrated additive manufacturing

    Mokhtarian, H., Coatanea, E., Paris, H., Mansor Mbow, M., Pourroy, F., René Marin, P., Vihinen, J. & Ellman, A., 28 Apr 2018, In : Journal of Mechanical Design. 140, 8, 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    A concept and local implementation for industry-academy collaboration and life-long learning

    Lanz, M., Lobov, A., Katajisto, K. & Mäkelä, P., 23 Apr 2018, In : Procedia Manufacturing. 23, p. 189-194 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    The FMS Training Center - a versatile learning environment for engineering education

    Toivonen, V., Lanz, M., Nylund, H. & Nieminen, H., 23 Apr 2018, In : Procedia Manufacturing. 23, p. 135-140 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  51. Published

    Online quality evaluation of tissue paper structure on new generation tissue machines

    Raunio, J-P., Löyttyniemi, T. & Ritala, R., 26 Mar 2018, In : Nordic Pulp and Paper Research Journal. 33, 1, p. 133-141 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...26 Next
Download list To download, please limit the number of search results to 1,000 or less.