Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. D4 Published development or research report or study
  2. Published

    Simulation of residual stresses and deformations in electron beam-welded copper canisters

    Aronen, A., Leikko, J., Taskinen, P. & Karvinen, R., 2013, Olkiluoto: Posiva. 68 p. (Posiva Working Report; no. 20)

    Research output: Book/ReportCommissioned reportProfessional

  3. Published

    ARC - Arktinen ajoneuvo- ja työkonetestaustoiminta

    Aaltonen, K., Haataja, M., Hietala, J-P., Leinonen, O., Moilanen, M., Multanen, P., Mäkinen, E., Petursdottir, J., Popov, M. & Väisänen, I., 2013, Oulun yliopisto. 122 p. (Oulun Yliopisto. Konetekniikan osasto. Raportti; vol. 133)

    Research output: Book/ReportCommissioned reportProfessional

  4. Published

    Betonin ajasta riippumattomat materiaalimallit

    Kouhia, R., 2013, Unknown Publisher. 83 p. (Liikenneviraston tutkimuksia ja selvityksiä; no. 38)

    Research output: Book/ReportCommissioned reportProfessional

  5. Published

    Virtuaalinen konelaboratorio ja semanttinen mallinnus konejärjestelmän suunnittelun tukena, Loppuraportti, Semogen II -hanke

    Nykänen, O., Koskinen, K. T., Ranta, P., Salonen, J., Aaltonen, J., Nurmi, J., Helminen, M., Alarotu, V., Salomaa, T. & Pohjolainen, S., 2013, Tampere: Tampereen teknillinen yliopisto, Smart Simulators -tutkimusryhmä. 50 p.

    Research output: Book/ReportCommissioned reportProfessional

  6. Published

    Talotekniikka

    Kalema, T. & Joutsi, J., 2013, Tampere: Tampereen teknillinen yliopisto. 6 p. (Tampereen teknillinen yliopisto. Rakennustekniikan laitos. Rakennustuotanto ja -talous. Raportti; vol. 14)

    Research output: Book/ReportCommissioned reportProfessional

  7. Published

    Käyttövarmuustiedon hallinta ja hyödyntäminen suunnittelussa

    Franssila, H., Kunttu, S., Saarinen, H. & Valkokari, P., 2012, Espoo: VALTION TEKNILLINEN TUTKIMUSKESKUS. 47 p. (VTT Technology; vol. 48)

    Research output: Book/ReportCommissioned reportProfessional

  8. Published

    Micro and Desktop Factory Roadmap

    Tuokko, R., Heikkilä, R., Järvenpää, E., Nurmi, A., Prusi, T., Siltala, N. & Vuola, A., 2012, Tampere: Tampere University of Technology. Department of Production Engineering. 112 p.

    Research output: Book/ReportCommissioned reportProfessional

  9. Published

    Käyttövarmuuden hallinta - standardista käytäntöön

    Ahonen, T., Jännes, J., Kunttu, S., Valkokari, P., Venho-Ahonen, O., Välisalo, T., Ellman, A., Hietala, J-P., Multanen, P., Mäkiranta, A., Saarinen, H. & Franssila, H., 2012, Espoo: VALTION TEKNILLINEN TUTKIMUSKESKUS. 73 p. (VTT Technology; vol. 69)

    Research output: Book/ReportCommissioned reportProfessional

  10. Published

    EFDA goal oriented training in remote handling - GOTRH

    Mattila, J., Alho, P., Väyrynen, J., Sibois, R. & Salminen, K., 2012, VALTION TEKNILLINEN TUTKIMUSKESKUS. 3 p. (VTT Science; vol. 7)

    Research output: Book/ReportCommissioned reportProfessional

  11. Published

    Käyttövarmuussuunnittelun kehittämistarpeet

    Valkokari, P., Ahonen, T., Franssila, H., Itäsalo, A., Jännes, J., Välisalo, T. & Ellman, A., 2012, Espoo: VALTION TEKNILLINEN TUTKIMUSKESKUS. 52 p. (VTT Working Papers; vol. 180)

    Research output: Book/ReportCommissioned reportProfessional

  12. Published

    Vaikuttavaa tutkimusta tavoitteellisella verkostotoiminnalla, Matine strategia 2018

    Riitahuhta, A. & Appelqvist, P., 2012, Helsinki: Maanpuolustuksen tieteellinen neuvottelukunta MATINE. 25 p.

    Research output: Book/ReportCommissioned reportProfessional

  13. Published

    Divertor RH design updates and DTP2 Phase 2 testing

    Siuko, M., Järvenpää, J. & Mattila, J., 2012, VALTION TEKNILLINEN TUTKIMUSKESKUS. 8 p. (VTT Science; vol. 7)

    Research output: Book/ReportCommissioned reportProfessional

  14. Published

    2008-2010 Host Activities Related to DTP2 Test Facility Operation and Upgrade Preparation

    Siuko, M., Järvenpää, J. & Mattila, J., 2011, Valtion teknillinen tutkimuslaitos. 11 p. (VTT Publications; vol. 764)

    Research output: Book/ReportCommissioned reportProfessional

  15. Published

    Divertor RH design updates and DTP2 Phase 2 testing

    Siuko, M., Järvenpää, J. & Mattila, J., 2011, Espoo: VTT. 6 p. (VTT Publications; vol. 764)

    Research output: Book/ReportCommissioned reportProfessional

  16. Published

    Multicriterion Compliance Minimization and Stress-constrained Minimum Weight Design of a Three-bar Truss

    Mela, K., 2011, Tampere University of Technology. 40 p. (Tampere University of Technology, Department of Mechanics and Design. Research Report; vol. 2)

    Research output: Book/ReportCommissioned reportProfessional

  17. Published

    2008-2009 Host Activities Related to DTP2 Test Facility Operation and Upgrade Preparation

    Siuko, M., Järvenpää, J. & Mattila, J., 2010, VTT. 12 p. (VTT Publications; vol. 738)

    Research output: Book/ReportCommissioned reportProfessional

  18. Published

    SISU 2010 - Uusi tuotantoajattelu, Tekes-ohjelman loppuraportti

    Tuokko, R., Majuri, M. & Suuronen, J., 2010, Unknown Publisher. 247 p. (Tekesin ohjelmaraportti; vol. 1/2010)

    Research output: Book/ReportCommissioned reportProfessional

  19. Published

    Oxy-fuel combustion and flue gases recirculation: Apparatus development, measurements and model

    Rodriguez, M., 2009, Tampere: Unknown Publisher. 27 p. (Tampereen teknillinen yliopisto, Energia- ja prosessitekniikan laitos. Raportti; vol. 190)

    Research output: Book/ReportCommissioned reportProfessional

  20. Published

    2008-2009 Host Activities Related to DTP2 Test Facility Operation and Upgrade Preparation

    Siuko, M., Järvenpää, J. & Mattila, J., 2009, VTT. 10 p. (VTT Publications; vol. 709)

    Research output: Book/ReportCommissioned reportProfessional

  21. Published

    Implementation of a DTP2 safety system for testing, and final CMM/SCEE integration and commissioning

    Mattila, J. & Järvenpää, J., 2009, VTT. 3 p. (VTT Publications; vol. 709)

    Research output: Book/ReportCommissioned reportProfessional

  22. Published

    Host activities in connection with the DTP2 test facility

    Järvenpää, J., Timperi, A., Tuominen, R. & Mattila, J., 2008, Espoo: VTT. 5 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  23. Published

    Software development and modelling of the CMM system

    Mattila, J., 2008, Espoo: VTT. 2 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  24. Published

    Development of DTP2 subsystems and tooling in support of remote handling trials

    Mattila, J., 2008, Espoo: VTT. 7 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  25. Published

    Implementation of a DTP2 safety system for testing, and final CMM/SCEE integration and commissioning

    Mattila, J. & Järvenpää, J., 2008, Espoo: VTT. 3 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  26. Published

    EFDA quality assurance exercise

    Mattila, J. & Järvenpää, J., 2008, Espoo: VTT. 2 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  27. D3 Professional conference proceedings
  28. Published

    Autonomous Area Clearing with a Robotic Wheel Loader

    Halbach, E., 27 May 2019, 15th Symposium on Advanced Space Technologies in Robotics and Automation (ASTRA). Noordwijk, The Netherlands: European Space Agency, 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  29. Published

    Improving tracking performance of composite nonlinear feedback controllers via new reset and hold feature of nonlinear functions

    Pyrhönen, V-P. & Vilkko, M., 15 May 2019, Automaatiopäivät 23: 15-16.5.2019 Oulu.. Juuso, E. (ed.). Oulu: Suomen Automaatioseura, 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  30. Published

    Robust and perfect tracking control of a DC servo motor

    Pyrhönen, V-P., 15 May 2019, Automaatiopäivät 23: 15-16.5.2019, Oulu. Juuso, E. (ed.). Oulu: Suomen Automaatioseura

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  31. Published

    Switching control of a water hydraulic cylinder with slow parallel-connected on/off valves

    Linjama, M., Grönholm, J. & Paloniitty, M., 28 Feb 2019, The 10th Workshop on Digital Fluid Power : February 28th-March 1st, 2019, Linz, Austria. Linz Center of Mechatronics, 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  32. Published

    Digital hydraulic multi-pressure actuators - simulation study of a forwarder crane

    Heikkilä, M., Huova, M. & Linjama, M., 28 Feb 2019, The 10th Workshop on Digital Fluid Power : February 28th - March 1st, 2019, Linz, Austria. Linz Center of Mechatronics, 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  33. Published

    Comportamiento Dinámico en Tracción a Alta Temperatura De Titanio Ensayado Por Dos Métodos Distintos

    Hueto, F., Sancho, R., Hokka, M. & Galvez, F., 2017, Grupo Español de Fractura.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  34. Published

    Digital Image Correlation as a Measurement Tool for Heart Surgery

    Hokka, M., 2017, Proceedings of the Annual Meeting of the International Digital Image Correlation Society, Barcelona.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  35. Published

    Identification of fundamental requirements for ideal metamodeling framework in additive manufacturing

    Mokhtarian, H., Coatanea, E., Paris, H. & Vihinen, J., 2017, Proceedings of the 2nd Annual SMACC Research Seminar 2017. Aaltonen, J., Virkkunen, R., Koskinen, K. T. & Kuivanen, R. (eds.). p. 29-31 3 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  36. Published

    Low-fidelity design analysis tool for early design phase

    Ellman, A., 10 Oct 2016, Proceedings of the 1st Annual SMACC Research Seminar 2016. p. 90-93 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  37. Published

    Toward Developing Surrogate Model Integrating Multi-physics, Multi-criteria Models for Additive Manufacturing Technologies

    Mokhtarian, H., Coatanea, E., Paris, H., Vihinen, J., Ikkala, K. & Kiviö, J., Oct 2016, Proceedings of the 1st Annual SMACC Research Seminar 2016. p. 40-42

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  38. Published

    Modeling of the Process Parameters Influencing Cold Metal Transfer (CMT): Development of an Approach Based in Causal Networks

    Välimäki, E., Mokhtarian, H., Vihinen, J. & Coatanea, E., Oct 2016, Proceedings of the 1st Annual SMACC Research Seminar 2016. p. 40-42. p. 56-59 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  39. Published

    Technical Cleanliness of Hose Assemblies in Fluid Power System

    Rinkinen, J., Huhturi, J. & Elo, L., 2 Jun 2016, 23rd International Conference on Hydraulics and Pneumatics, June 1 – 3, 2016, Prague, Czech Republic. 8 p. 2

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  40. Published

    Correlation of wear and work in dual pivoted jaw crusher tests

    Terva, J., Valtonen, K., Siitonen, P. & Kuokkala, V-T., Jun 2016, The 17th Nordic Symposium on Tribology - NORDTRIB 2016.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  41. Published

    High-Performance Digital Hydraulic Tracking Control of a Mobile Boom Mockup

    Linjama, M., Huova, M., Karhu, O. & Huhtala, K., Mar 2016, 10th International Fluid Power Conference (10. IFK) . Dresden, Vol. 1. 12 p. A-1

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  42. Published

    LeanMES Concept – An Approach to Manage Order-Delivery Information in a Production Network

    Järvenpää, E., Toivonen, V., Lanz, M. & Nieminen, H., 2016, Proceedings of the 26th International conference on Flexible Automation and Intelligent Manufacturing (FAIM2016). p. 988-995 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  43. Published

    Closing the Gap – Improving Production Control with a New Layer of Decision Making

    Toivonen, V., Järvenpää, E. & Lanz, M., 2016, Proceedings of the 26th International conference on Flexible Automation and Intelligent Manufacturing (FAIM2016). p. 1042-1049 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  44. Published

    The role of microstructure in high stress abrasion of white cast irons

    Heino, V., Kallio, M., Valtonen, K. & Kuokkala, V-T., 2016, The 17th Nordic Symposium on Tribology - NORDTRIB 2016 14th - 17th June 2016 Aulanko, Hämeenlinna, Finland.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  45. Published

    The effects of microstructure on erosive-abrasive wear behavior of carbide free bainitic and boron steels

    Vuorinen, E., Heino, V., Ojala, N., Haiko, O. & Hedayati, A., 2016, The 17th Nordic Symposium on Tribology - NORDTRIB 2016 14th - 17th June 2016 Aulanko, Hämeenlinna, Finland.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  46. Published

    Sensor-assisted Flexible Industrial Robot Workcell: A Case Study

    Halme, J., Changizi, A., Hietanen, A., Latokartano, J., Lanz, M., Kämäräinen, J. & Koskinen, K. T., 2016, Proceedings of the 1st Annual SMACC Research Seminar 2016. p. 61-64 4 p. 14

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  47. Published

    Characterization of the cutting parameters in comparison to the machine tool input power

    Ikkala, K., Kiviö, J., Mokhtarian, H. & Coatanea, E., 2016, 26th International Conference on Flexible Automation and Inteligent Manufacturing, FAIM 2016, KSTC Seoul.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  48. Published

    Modeling and Preliminary Design of Underwater Robot for Inspection

    Zavari, S., Salomaa, T., Koskinen, K., Villa Escusol, J. & Aaltonen, J., 2016, Proceedings of the 2nd Annual SMACC Research Seminar 2017. Tampere: Tampere University of Technology, p. 81-84 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  49. Published

    Digital image correlation method in hydro turbine shaft torque and vibration monitoring

    Saarenrinne, P., Miettinen, J., Ylönen, M. & Kokko, V., 27 Oct 2015, Proceedings of the Hydro 2015 Bordeaux 26-28 October 2015. Hydro Power & Dams, 8 p. 08.06

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  50. Published

    Productivity measurement at the factory level

    Paranko, J., Paranko, B. & Huhtala, P., 7 Oct 2015, TARC 2015 Trends in accounting research conference : With International PhD Colloquium and Workshop 7-9 th october 2015, Lodz, Poland. Lodz, Poland: University of Lodz, Poland, p. 1-25 25 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  51. Published

    Local oscillation of the boundary layer over the surface of swimming rainbow trout: implications for active drag reduction

    Saarenrinne, P. & Yanase, K., 15 Sep 2015, Proceedings of the 11TH International Symposium on Particle Image Velocimetry – PIV15 . 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  52. Published

    Compression model for radial compression of Norway spruce earlywood and latewood

    Moilanen, C., Björkqvist, T. & Saarenrinne, P., 19 May 2015, 9th International Mechanical Pulping Research Seminar. Trondheim, Norway

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

Previous 1 2 3 4 5 6 7 8 ...26 Next
Download list To download, please limit the number of search results to 1,000 or less.