Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. B3 Non-refereed article in conference proceedings
  2. Published

    Enhancing learning by utilising students on creating course material and course grading evaluation

    Rapo, L. & Vanhatalo, M., 2010, Proceedings of XI International Conference on Engineering and Computer Education, INTERTECH'2010, Engineering and Technology Education Innovating for Growth, 7-10 March, 2010, Ilhéus, Brazil. p. 174-178

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  3. Published

    Introduction to contact modelling - Part 1

    Lehtovaara, A., 2010, Striking Surfaces, International Seminar on Wear Control, Tampere University of Technology, Tampere Wear Center, 20.10.2010. p. 14 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  4. Published

    Modeling of closed spare part circulation for better availability of aircraft

    Laitinen, J. & Hagmark, P-E., 2010, Proceedings of the 4th Asia-Pacific International Symposium on Advanced Reliability and Maintenance Modeling APARM 2010, Wellington, New Zealand, 2 - 4 December, 2010. Chukova, S., Haywood, J. & Dohi, T. (eds.). p. 409-416

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  5. Published

    Logical and semantical foundations for knowledge representation for assembly and manufacturing processes

    Lanz, M. & Tuokko, R., 2010, Proceeding of Post-Graduate Workshop on Intelligent Machines and Transport Systems, 3-7 May 2010, CERN, Switzerland. p. 98-109 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  6. Published

    Energy reduction in chip refining by optimization of operating parameters and segment design

    Huhtanen, J-P., Ruola, V. & Vuorio, P., 2010, 7th International Seminar on Fundamental Mechanical Pulp Research (IFMPRS 2010), June 21-23, 2010, Nanjing, China. p. 125-129

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  7. Published

    Microfactory concept for highly flexible volume assembly of watch mechanisms

    Järvenpää, E., Heikkilä, R. & Tuokko, R., 2010, Proceedings of the 7th International Workshop on Microfactories, IWMF 2010, 24-27 October, 2010, Daejeon, Korea. p. 9-14

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  8. Published

    Developing engineering creativity in the early design stages of product development process

    Ryynänen, L. & Riitahuhta, A., 2010, Proceedings of The First International Conference on Design Creativity, ICDC 2010, 29 November-1 December, 2010, Kobe, Japan. p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  9. Published

    Effect of asymmetric heat transfer on glass deformations

    Aronen, A., 2010, Conference on Architectural and Structural Applications of Glass Faculty of Architecture, Challenging Glass 2, Delft University of Technology, 20-21 May 2010, the Netherlands. Bos, F., Louter, C. & Veer, F. (eds.). p. 279-285

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  10. Published

    Managing high variety products in global value systems

    Pulkkinen, A., Riitahuhta, A., Leino, S-P., Lappeteläinen, I., Heikkilä, M. & Kohtamäki, M., 2010, The 7th International Conference on Product Lifecycle Management, PLM 10, 12-14 July, 2010, BIBA University of Bremen, Germany. Bremen: BIBA-Bremen Institut Für Produktion und Logistik GmbH, p. 13 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  11. Published

    Novel approach on application manufacturing using inkjet printing, laser ablation and new polymer substrate

    Kunnari, E., Karttunen, M., Kumpulainen, T., Kortet, S., Laine-Ma, T., Mäntysalo, M., Smalen, M. & Ruuskanen, P., 2010, ICEP2010. International Conference on Electronics Packaging, May 12-14, 2010, Hokkaido, Japan. p. 249-254

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  12. Published

    Information management challenges and enabling factors for utilizing virtual product builds

    Mela, J., Järvenpää, E., Velez, R., Lehtonen, T. & Riitahuhta, A., 2010, The 7th International Conference on Product Lifecycle Management, PLM 10, 12-14 July, 2010, BIBA University of Bremen, Germany. Bremen: BIBA-Bremen Institut Für Produktion und Logistik GmbH, p. 15 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  13. Published

    On the relation of business processes and engineering change management

    Pulkkinen, A. & Riitahuhta, A., 2009, Proceedings of the 6th International Product Lifecycle Management conference, PLM09, 6-8 July 2009, Bath, UK. McMahon, C., Dutta, D. & Huang, G. (eds.). p. 10 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  14. Published

    Symmetrization of Tensors on General Spaces and Their Applications in Continuum Mechanics

    Holopainen, S., 2009, Proceedings of 7th EUROMECH Solid Mechanics Conference - Lectures and General Sessions. Ambrosio, J. A. C. & Silva, M. P. T. (eds.). APMTAC, p. 63-64 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  15. Published

    The role of university centre for continuing education in the creation and implementation of innovation management education

    Siekkinen, R. & Riitahuhta, A., 2009, The 17th International Conference on Engineering Design ICED'09, 24-27 August, 2009, Stanford, California, USA. p. 195-202

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  16. Published

    Development of micro gripper systems for microfactories

    Heikkilä, R., Remes, M., Prusi, T. & Tuokko, R., 2008, Proceedings of the 4th International Workshop on Microfactory Technology, 10-11 July, 2008, Jeju-do, Korea. p. 4 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  17. Published

    Design education with simulation games

    Juuti, T., Hansen, P. K. & Lehtonen, T., 2008, Proceedings of the 10th Engineering and product design Eduacation International Conference, 4-5 September, 2008, Universitat Politecnica de Catalunya, Barcelona, Spain. Clarke, A., Evatt, M., Hogarth, P., Lloveras, J. & Pons, L. (eds.). p. 811-816

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  18. Published

    Improving learning results with peer evaluation

    Kallela, T., Lanz, M., Rapo, L. & Riitahuhta, A., 2008, New Perspectives in design education, Universitat Politecnica de Catalunya, 4-5 September, 2008, Barcelona, Spain. Clarke, A. (ed.). p. 799-804

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  19. Published

    Out of plane actuator concept and characterization of dielectric elastomer EAP materials

    Paajanen, M., Jouppila, V., Ellman, A., Bauer, S., Kofod, G., Karesoja, M. & Tenhu, H., 2006, Applied Material Research at VTT, Helsinki, 2006. Ritschkoff, A-C., Koskinen, J. & Paajanen, M. (eds.). Helsinki: VTT, p. 50-60

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  20. Published

    Views to micro and desktop factories - from miniaturization of products to minaturization of production equipment and factories

    Tuokko, R., 2006, Philips Precision Technology Conference (PPTC), 3-4 October, 2006, Philips Management Training and Conference Centre Groenendael, Hilvarenbeek, The Netherlands. p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  21. Published

    Effect of parameter uncertainty on reliability of hydraulic transmission system simulation

    Ellman, A., Kajaste, J., Kauranne, H. & Pietola, M., 2005, Proceedings of IMECE 2005, 2005 ASME International Mechanical Engineering Congress and Exposition, November 5-11, 2005, Orlando, Florida USA. p. 7 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  22. C1 Separate scientific books
  23. Published

    Design synthesis: integrated product and manufacturing system design

    Britton, G. & Torvinen, S., 2014, CRC Press. 358 p.

    Research output: Book/ReportBookScientificpeer-review

  24. Published

    Standard development of ISO/FDIS 29262

    Siltala, N., 2010, Unknown Publisher. 17 p.

    Research output: Book/ReportBookScientificpeer-review

  25. Published

    Standard development of ANSI/IPC-2546 Am2. ANSI/IPC-2546 Am2: Sectional Requirements for Shop-Floor Equipment Communication Messages (CAMX) for Printed Circuit Board Assembly. Amendment 2 - Dispensing Equipment, Reflow Equipment and Final Assembly and Packaging sections

    Aube, S., Baggio, T., Breche, J., Burmeister, C., Camargo, J., Dugenske, A. D., Fraser, A., Hyvärinen, J., Karhumäki, O., Ludwig, E., Morris, D. J., Niemi, T., Ronkainen, H., Rubow, B., Siltala, N., Urho, M. & Voitus, R., 2005, Bannockburn, IL: ANSI/IPC. 124 p.

    Research output: Book/ReportBookScientificpeer-review

  26. C2 Edited books
  27. Published

    Special Issue on ‘New Hydraulic Components for Tough Robots’

    Suzumori, K. (ed.), Hyon, S. H. (ed.), Semini, C. (ed.), Mattila, J. (ed.) & Kanda, T. (ed.), 2018, In : Advanced Robotics.

    Research output: Contribution to journalSpecial issueScientificpeer-review

  28. Published

    Proceedings of the 2nd Annual SMACC Research Seminar 2017

    Aaltonen, J., Koskinen, K., Virkkunen, R. & Kuivanen, R., 7 Nov 2017, Tampere: Tampere University of Technology. 62 p.

    Research output: Book/ReportAnthologyScientificpeer-review

  29. Published

    Big data tulee – nykytila ja tulevaisuuden mahdollisuudet

    Holopainen, S. (Guest ed.) & Kuusi, O. (Guest ed.), Jun 2016, In : Futura. 2, 113 p.

    Research output: Contribution to journalSpecial issueScientificpeer-review

  30. Published

    Proceedings of the 10th World Congress on Engineering Asset Management (WCEAM 2015)

    Koskinen, K. T. (ed.), Kortelainen, H. (ed.), Aaltonen, J. (ed.), Uusitalo, T. (ed.), Komonen, K. (ed.), Mathew, J. (ed.) & Laitinen, J. (ed.), 25 Mar 2016, Springer International Publishing. 686 p. (Lecture Notes in Mechanical Engineering)

    Research output: Book/ReportAnthologyScientificpeer-review

  31. Published

    The Fourteenth Scandinavian International Conference on Fluid Power, SICFP15: Proceedings

    Laamanen, A. (ed.) & Huhtala, K. (ed.), 2015, Tampere University of Technology. Department of Intelligent Hydraulics and Automation. 835 p. (Scandinavian International Conference on Fluid Power (SICFP))

    Research output: Book/ReportAnthologyScientificpeer-review

  32. Published

    Industrial cloud-based cyber-physical systems, The IMC-AESOP approach

    Colombo, A. W. (ed.), Bangemann, T. (ed.), Karnouskos, S. (ed.), Delsing, J. (ed.), Stluka, P. (ed.), Harrison, R. (ed.), Jammes, F. (ed.) & Martinez Lastra, J. L. (ed.), 2014, Cham: Springer. 245 p.

    Research output: Book/ReportAnthologyScientificpeer-review

  33. Published

    Editorial of special issue Telerobotics and systems engineering for scientific facilities

    Ferre, M. (ed.), Mattila, J. (ed.), Siciliano, B. (ed.) & Bonnal, P. (ed.), 2014, InTech Open Access Publisher. 1 p. (International journal of advanced robotic systems; vol. 11)

    Research output: Book/ReportAnthologyScientificpeer-review

  34. Published

    Industrial applications of holonic and multi-agent systems, 6th International Conference HoloMAS 2013 , Prague, Czech Republic, August 26-28, 2013 Proceedings

    Marik, V. (ed.), Martinez Lastra, J. L. (ed.) & Skobelev, P. (ed.), 2013, Heidelberg: Springer. 2 p. (Lecture Notes in Computer Science; vol. 8062)

    Research output: Book/ReportAnthologyScientificpeer-review

  35. Published

    Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland

    Laamanen, A. (ed.) & Linjama, M. (ed.), 2012, Tampere: Tampere University of Technology. Department of Intellidgent Hydraulics and Automation.

    Research output: Book/ReportAnthologyScientificpeer-review

  36. Published

    Proceedings of the 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012, 10-13 June, 2012, Helsinki, Finland

    Nylund, H. (ed.), Kantti, S. (ed.), Toivonen, V. (ed.) & Torvinen, S. (ed.), 2012, Tampere: Tampere University of Technology. Department of Production Engineering.

    Research output: Book/ReportAnthologyScientificpeer-review

  37. Published

    Proceedings of 6th Baltic Heat Transfer Conference - BHTC2011, August 24-26 2011, Tampere Finland

    Karvinen, R. (ed.) & Lindstedt, M. (ed.), 2011, Tampere: Tampere University of Technology. (Baltic Heat Transfer Conference BHTC)

    Research output: Book/ReportAnthologyScientificpeer-review

  38. Published

    Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland

    Sairiala, H. (ed.) & Koskinen, K. T. (ed.), 2011, Tampere: Tampere University of Technology.

    Research output: Book/ReportAnthologyScientificpeer-review

  39. Published

    Parhaat tuottavat - Valmistavan teknologiateollisuuden tutkimusagenda 2020

    Heilala, J. (ed.), Majuri, M. (ed.), Sääski, J. (ed.), Pesonen, J. (ed.), Halme, J. (ed.), Hyötyläinen, R. (ed.), Hentula, M. (ed.), Paro, J. (ed.) & Tuokko, R. (ed.), 2011, Helsinki: Tekes, VTT, TTY, Teknologiateollisuus ry.

    Research output: Book/ReportAnthologyScientificpeer-review

  40. Published

    Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland

    Laamanen, A. (ed.) & Linjama, M. (ed.), 2010, Tampere: Tampere University of Technology.

    Research output: Book/ReportAnthologyScientificpeer-review

  41. Published

    Intelligent Machines and Transport Systems, Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, Cern, Switzerland

    Karvinen, T. (ed.) & Keskinen, E. (ed.), 2010, Unknown Publisher.

    Research output: Book/ReportAnthologyScientificpeer-review

  42. D1 Article in a trade journal
  43. Published

    Robotit yhteiskunnan palveluksessa

    Halonen, E., 25 Apr 2018, In : Automaatioväylä. 2, p. 27 1 p.

    Research output: Contribution to journalArticleProfessional

  44. Published

    Levynmuovauksen teemapäivä - Steel forum 2017

    Minkkinen, A., Vuorio, T. & Peura, P., Apr 2018, In : Ohutlevy-lehti. 2018, 1, p. 13-16 4 p.

    Research output: Contribution to journalArticleProfessional

  45. Published

    Robotiikan turvallisuus ja standardit

    Lanz, M. & Järvenpää, E., Apr 2018, In : Automaatioväylä. 2, p. 29

    Research output: Contribution to journalArticleProfessional

  46. Published

    Robottien tulevaisuus: seuralaisia ja uusia ideoita

    Lanz, M. & Järvenpää, E., Apr 2018, In : Automaatioväylä. 2, p. 30

    Research output: Contribution to journalArticleProfessional

  47. Published

    Koneisiin lisää kestoikää kitkaväsymisen paremmalla hallinnalla

    Juoksukangas, J., Mar 2018, In : Promaint. 1, p. 24-26 3 p.

    Research output: Contribution to journalArticleProfessional

  48. Published

    IDDRG 2017 konferenssi Munchenissä - Materials Modelling for Sheet Metal Forming

    Peura, P., 20 Sep 2017, In : Ohutlevy-lehti. 2, p. 7-9 3 p.

    Research output: Contribution to journalArticleProfessional

  49. Published

    Tuntemalla olosuhteet voit optimoida materiaalit kulutussovelluksiin

    Ratia, V., Ojala, N., Valtonen, K. & Heino, V., May 2016, In : Promaint. 3, p. 16-20

    Research output: Contribution to journalArticleProfessional

  50. Published

    Nopeutettu elinkaaren määritys, Tampereen teknillisen yliopiston NEM-projekti

    Miettinen, J., 10 Mar 2016, In : Koneviesti. 2016, 4, p. 44-45 2 p.

    Research output: Contribution to journalArticleProfessional

  51. Published

    Kitka ja kuluminen haastavat koneensuunnittelijat

    Valtonen, K. & Lehtovaara, A., 16 Feb 2016, In : Materia. 2016, 1, p. 29-30 2 p.

    Research output: Contribution to journalArticleProfessional

  52. Published

    Reiänlaajennustesti - voidaanko sen tulos ennustaa vetokokeen perusteella?

    Peura, P., Chufan, S., Hokka, M. & Minkkinen, A., 2016, In : Ohutlevy-lehti. 2, p. 28-33 6 p.

    Research output: Contribution to journalArticleProfessional

  53. Published

    Soodakattilan käyttövarmuuden parantaminen tuhkayhdisteiden käyttäytymistä mallintamalla

    Leppänen, A. & Haaga, K., 2015, In : Promaint. 3/2015, p. 25-27 3 p.

    Research output: Contribution to journalArticleProfessional

  54. Published

    Keskipakopumppujen mitoituksen ja käytön haasteet

    Lehtonen, E. & Rinkinen, J., 2015, In : Promaint. 29, 4, p. 37-39 3 p.

    Research output: Contribution to journalArticleProfessional

Download list To download, please limit the number of search results to 1,000 or less.