Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. D3 Professional conference proceedings
  2. Published

    Robust and perfect tracking control of a DC servo motor

    Pyrhönen, V-P., 15 May 2019, Automaatiopäivät 23: 15-16.5.2019, Oulu. Juuso, E. (ed.). Oulu: Suomen Automaatioseura

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  3. Published

    Switching control of a water hydraulic cylinder with slow parallel-connected on/off valves

    Linjama, M., Grönholm, J. & Paloniitty, M., 28 Feb 2019, The 10th Workshop on Digital Fluid Power : February 28th-March 1st, 2019, Linz, Austria. Linz Center of Mechatronics, 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  4. Published

    Digital hydraulic multi-pressure actuators - simulation study of a forwarder crane

    Heikkilä, M., Huova, M. & Linjama, M., 28 Feb 2019, The 10th Workshop on Digital Fluid Power : February 28th - March 1st, 2019, Linz, Austria. Linz Center of Mechatronics, 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  5. Published

    Comportamiento Dinámico en Tracción a Alta Temperatura De Titanio Ensayado Por Dos Métodos Distintos

    Hueto, F., Sancho, R., Hokka, M. & Galvez, F., 2017, Grupo Español de Fractura.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  6. Published

    Digital Image Correlation as a Measurement Tool for Heart Surgery

    Hokka, M., 2017, Proceedings of the Annual Meeting of the International Digital Image Correlation Society, Barcelona.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  7. Published

    Identification of fundamental requirements for ideal metamodeling framework in additive manufacturing

    Mokhtarian, H., Coatanea, E., Paris, H. & Vihinen, J., 2017, Proceedings of the 2nd Annual SMACC Research Seminar 2017. Aaltonen, J., Virkkunen, R., Koskinen, K. T. & Kuivanen, R. (eds.). p. 29-31 3 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  8. Published

    Low-fidelity design analysis tool for early design phase

    Ellman, A., 10 Oct 2016, Proceedings of the 1st Annual SMACC Research Seminar 2016. p. 90-93 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  9. Published

    Toward Developing Surrogate Model Integrating Multi-physics, Multi-criteria Models for Additive Manufacturing Technologies

    Mokhtarian, H., Coatanea, E., Paris, H., Vihinen, J., Ikkala, K. & Kiviö, J., Oct 2016, Proceedings of the 1st Annual SMACC Research Seminar 2016. p. 40-42

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  10. Published

    Modeling of the Process Parameters Influencing Cold Metal Transfer (CMT): Development of an Approach Based in Causal Networks

    Välimäki, E., Mokhtarian, H., Vihinen, J. & Coatanea, E., Oct 2016, Proceedings of the 1st Annual SMACC Research Seminar 2016. p. 40-42. p. 56-59 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  11. Published

    Technical Cleanliness of Hose Assemblies in Fluid Power System

    Rinkinen, J., Huhturi, J. & Elo, L., 2 Jun 2016, 23rd International Conference on Hydraulics and Pneumatics, June 1 – 3, 2016, Prague, Czech Republic. 8 p. 2

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  12. Published

    Correlation of wear and work in dual pivoted jaw crusher tests

    Terva, J., Valtonen, K., Siitonen, P. & Kuokkala, V-T., Jun 2016, The 17th Nordic Symposium on Tribology - NORDTRIB 2016.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  13. Published

    High-Performance Digital Hydraulic Tracking Control of a Mobile Boom Mockup

    Linjama, M., Huova, M., Karhu, O. & Huhtala, K., Mar 2016, 10th International Fluid Power Conference (10. IFK) . Dresden, Vol. 1. 12 p. A-1

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  14. Published

    LeanMES Concept – An Approach to Manage Order-Delivery Information in a Production Network

    Järvenpää, E., Toivonen, V., Lanz, M. & Nieminen, H., 2016, Proceedings of the 26th International conference on Flexible Automation and Intelligent Manufacturing (FAIM2016). p. 988-995 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  15. Published

    Closing the Gap – Improving Production Control with a New Layer of Decision Making

    Toivonen, V., Järvenpää, E. & Lanz, M., 2016, Proceedings of the 26th International conference on Flexible Automation and Intelligent Manufacturing (FAIM2016). p. 1042-1049 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  16. Published

    The role of microstructure in high stress abrasion of white cast irons

    Heino, V., Kallio, M., Valtonen, K. & Kuokkala, V-T., 2016, The 17th Nordic Symposium on Tribology - NORDTRIB 2016 14th - 17th June 2016 Aulanko, Hämeenlinna, Finland.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  17. Published

    The effects of microstructure on erosive-abrasive wear behavior of carbide free bainitic and boron steels

    Vuorinen, E., Heino, V., Ojala, N., Haiko, O. & Hedayati, A., 2016, The 17th Nordic Symposium on Tribology - NORDTRIB 2016 14th - 17th June 2016 Aulanko, Hämeenlinna, Finland.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  18. Published

    Sensor-assisted Flexible Industrial Robot Workcell: A Case Study

    Halme, J., Changizi, A., Hietanen, A., Latokartano, J., Lanz, M., Kämäräinen, J. & Koskinen, K. T., 2016, Proceedings of the 1st Annual SMACC Research Seminar 2016. p. 61-64 4 p. 14

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  19. Published

    Characterization of the cutting parameters in comparison to the machine tool input power

    Ikkala, K., Kiviö, J., Mokhtarian, H. & Coatanea, E., 2016, 26th International Conference on Flexible Automation and Inteligent Manufacturing, FAIM 2016, KSTC Seoul.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  20. Published

    Modeling and Preliminary Design of Underwater Robot for Inspection

    Zavari, S., Salomaa, T., Koskinen, K., Villa Escusol, J. & Aaltonen, J., 2016, Proceedings of the 2nd Annual SMACC Research Seminar 2017. Tampere: Tampere University of Technology, p. 81-84 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  21. Published

    Digital image correlation method in hydro turbine shaft torque and vibration monitoring

    Saarenrinne, P., Miettinen, J., Ylönen, M. & Kokko, V., 27 Oct 2015, Proceedings of the Hydro 2015 Bordeaux 26-28 October 2015. Hydro Power & Dams, 8 p. 08.06

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  22. Published

    Productivity measurement at the factory level

    Paranko, J., Paranko, B. & Huhtala, P., 7 Oct 2015, TARC 2015 Trends in accounting research conference : With International PhD Colloquium and Workshop 7-9 th october 2015, Lodz, Poland. Lodz, Poland: University of Lodz, Poland, p. 1-25 25 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  23. Published

    Local oscillation of the boundary layer over the surface of swimming rainbow trout: implications for active drag reduction

    Saarenrinne, P. & Yanase, K., 15 Sep 2015, Proceedings of the 11TH International Symposium on Particle Image Velocimetry – PIV15 . 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  24. Published

    Compression model for radial compression of Norway spruce earlywood and latewood

    Moilanen, C., Björkqvist, T. & Saarenrinne, P., 19 May 2015, 9th International Mechanical Pulping Research Seminar. Trondheim, Norway

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  25. Published

    Using maintenance data for extended warranty simulation

    Mahlamäki, K., Jokinen, J., Borgman, J., Niemi, A. & Rämänen, J., 2015, COMADEM 2014, Implications of life cycle analysis in asset and maintenance management, 16-18 September 2014, Brisbane Convention and Exhibition Centre, Australia. 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  26. Published

    Two models for hydraulic cylinder

    Ylinen, A., Kouhia, R. & Mäkinen, J., 2015, 2nd International Conference on Multi-Scale Computational Methods for Solids and Fluids: ECCOMAS MSF 2015. Ibrahimbegović, A., Ademović, N., Ilić-Georgijević, E., Serdarević, A., Hrasnica, M. & Dolarević, S. (eds.). Sarajevo, p. 115-116 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  27. Published

    Improving Recovery Boiler Availability through Understanding Fume Behavior

    Leppänen, A. & Välimäki, E., 2015, TAPPI PEERS Conference Proceedings, October 25-28, 2015. Atlanta, Georgia: TAPPI, 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  28. Published

    Hydraulikomponenttien puhtausvalvontastandardien tilanne 2014

    Rinkinen, J., 2014, PAMAS 2014 Käyttäjäpäivä, 4.2.2014, Tampereen teknillinen yliopisto, Tampere. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). Tampere: Tampereen teknillinen yliopisto, p. 157-182 26 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  29. Published

    Implementing KPIs for energy performance assessment in brownfield districts

    Florea, A., Martinez Lastra, J. L., Marquez, J. A., Colino, A., Presser, M. & Larranaga, M., 2014, Sustainable Places, October 1-3, 2014, Nice, France. 21 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  30. Published

    Hydraulikomponenttien testipenkkistandardi ja mittaustuloksia

    Pekkonen, J., Elo, L., Kuosku, M. & Rinkinen, J., 2014, PAMAS 2014 Käyttäjäpäivä, 4.2.2014, Tampereen teknillinen yliopisto, Tampere. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). Tampere: Tampereen teknillinen yliopisto, p. 199-210 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  31. Published

    Automaattinen öljyn epäpuhtauksien mittaus ja keskeiset standardit

    Multanen, P., Niiranen, E., Elo, L. & Rinkinen, J., 2014, PAMAS 2014 Käyttäjäpäivä, 4.2.2014, Tampereen teknillinen yliopisto, Tampere. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). Tampere: Tampereen teknillinen yliopisto, p. 43-70 28 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  32. Published

    Kokemuksia inline- ja online-mittauksista - ISO/SAE -standardit

    Elo, L., Pekkonen, J. & Rinkinen, J., 2012, KompuNW -verkostoseminaari TTY:ssa 9.10.2012. Tampere: Tampere University of Technology, IHA - Department of Intelligent Hydraulics and Automation, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  33. Published

    IHA:n KompuNW-testipenkillä tehtyjä mittauksia

    Pekkonen, J., Elo, L., Kuosku, M. & Rinkinen, J., 2012, KompuNW -verkostoseminaari TTY:ssa 9.10.2012. Tampere: Tampere University of Technology, IHA - Department of Intelligent Hydraulics and Automation, p. 1-16 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  34. Published

    Mittaustuloksia kaupallisilla puhtaustestikaapeilla

    Kuosku, M., Pekkonen, J. & Rinkinen, J., 2012, KompuNW -verkostoseminaari TTY:ssa 9.10.2012. Tampere: Tampere University of Technology, IHA - Department of Intelligent Hydraulics and Automation, p. 1-15 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  35. Published

    Voiteluöljyn online- ja inline-kunnonvalvonta, "Uusia tapoja ja menetelmiä öljyn kunnon ja vaihtovälin määrittelemiseksi"

    Elo, L. & Rinkinen, J., 2012, Voiteluaineanalyysit mittaavan kunnossapidon työkaluna, AEL -seminaari 29.8.2012. Helsinki: Elinkeinoelämän koulutuspalvelut, p. 1-14 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  36. Published

    Komponentin ja järjestelmän elinkaaren mallintaminen analyyttisillä menetelmillä

    Aaltonen, J., 2012, Hydraulijärjestelmien modernisointi, 21.-22.3.2012, Suomen ilmailumuseo, Vantaa, Kunnossapitoyhdistys. Helsinki: Kunnossapitoyhdistys ProMaint, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  37. Published

    Koneiden vikaantumismekanismit

    Miettinen, J., 2011, Kuntoon perustuva kunnossapito ja kunnonvalvonta, 23.-24.11.2011, Tampere. Kunnossapitoyhdistys ProMaint, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  38. Published

    Värähtelymittauksen perusteet

    Miettinen, J., 2011, Kuntoon perustuva kunnossapito ja kunnonvalvonta, 23.-24.11.2011, Tampere. Kunnossapitoyhdistys ProMaint, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  39. Published

    Out of plane acturator concept and characterization of dielectric elastomer EAP materials

    Paajanen, M., Jouppila, V., Ellman, A., Bauer, S., Kofod, G., Karesoja, M. & Tenhu, H., 2006, Applied Material Research at VTT. VTT Symposium. Ritschkoff, A-C., Koskinen, J. & Paajanen, M. (eds.). p. 50-60

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  40. D4 Published development or research report or study
  41. Published

    Industrialization of hybrid and additive manufacturing-Implementation to Finnish industry (HYBRAM)

    Riipinen, T., Kujanpää, V., Komi, E., Kilpeläinen, P., Savolainen, M., Puukko, P., Vihinen, J., Coatanea, E. & Mokhtarian, H., 26 Nov 2018, VTT Technical Research Centre of Finland. 66 p. (Research Reports)

    Research output: Book/ReportCommissioned reportProfessional

  42. Unpublished

    FIMA report: The diesel engine and its rivals – The future of powering non-road mobile machinery

    Tikkanen, S., 26 May 2016, (Unpublished) FIMA, Forum for Intelligent Machines ry. 43 p.

    Research output: Book/ReportCommissioned reportProfessional

  43. Published

    Towards material excellence: Evaluation of Tekes' programmes on materials

    Timonen, J., Antikainen, M., Das, A., Sarlin, E. & Vuorinen, J., 2016, Tekes. 61 p.

    Research output: Book/ReportCommissioned reportProfessional

  44. Published

    Regenerative Hydraulic Hybrid with Digi-valve and Multi-chamber Cylinder Technology

    Laamanen, A., 2014, Tampere: FIMECC Oy. 5 p. (FIMECC Publications Series. Energy and Life-cycle Cost Efficient Machines; no. 2/2014)

    Research output: Book/ReportCommissioned reportProfessional

  45. Published

    CFD based on-line process analysis - applied to circulating and bubbling fluidized bed processes

    Kallio, S., Saarenrinne, P., Peltola, J., Tähtinen, M., Saxén, H., Kärkkäinen, T., Niemi, T., Karvonen, L., Nevalainen, H., Elfvengren, J., Kolehmainen, J., Hermanson, A., Mondal, D. & Maslov, A., 2014, Espoo: VTT. 43 p. (Research report VTT-R; no. 04576-14)

    Research output: Book/ReportCommissioned reportProfessional

  46. Published

    Deriving Efficient and Dependable Parallel Programs from Simulink Models

    Ostroumov, S., Boström, P., Waldén, M. & Huova, M., 2014, Turku: TURKU CENTRE FOR COMPUTER SCIENCE. 38 p. (TUCS Technical Report; no. 1111)

    Research output: Book/ReportCommissioned reportProfessional

  47. Published

    Digital Hydraulics Applied Research - Marine Hydraulics

    Mäkinen, E., Kukkonen, S. & Perukangas, M., 2014, Tampere: FIMECC Oy. 3 p. (FIMECC Publications Series; no. 2)

    Research output: Book/ReportCommissioned reportProfessional

  48. Published

    VTT Technical Research Centre of Finland and Tampere University of Technoloy

    Ventä, O. & Huhtala, K., 2014, Tampere: FIMECC Oy. 3 p. (FIMECC Publications Series; no. 2)

    Research output: Book/ReportCommissioned reportProfessional

  49. Published

    Digital Microhydraulics

    Laamanen, A. & Linjama, M., 2014, Tampere: FIMECC Oy. 4 p. (FIMECC Publications Series; no. 2)

    Research output: Book/ReportCommissioned reportProfessional

  50. Published

    Simulation of residual stresses and deformations in electron beam-welded copper canisters

    Aronen, A., Leikko, J., Taskinen, P. & Karvinen, R., 2013, Olkiluoto: Posiva. 68 p. (Posiva Working Report; no. 20)

    Research output: Book/ReportCommissioned reportProfessional

  51. Published

    ARC - Arktinen ajoneuvo- ja työkonetestaustoiminta

    Aaltonen, K., Haataja, M., Hietala, J-P., Leinonen, O., Moilanen, M., Multanen, P., Mäkinen, E., Petursdottir, J., Popov, M. & Väisänen, I., 2013, Oulun yliopisto. 122 p. (Oulun Yliopisto. Konetekniikan osasto. Raportti; vol. 133)

    Research output: Book/ReportCommissioned reportProfessional

  52. Published

    Betonin ajasta riippumattomat materiaalimallit

    Kouhia, R., 2013, Unknown Publisher. 83 p. (Liikenneviraston tutkimuksia ja selvityksiä; no. 38)

    Research output: Book/ReportCommissioned reportProfessional

Download list To download, please limit the number of search results to 1,000 or less.