Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. A1 Journal article-refereed
  2. Published

    Breaking down the requirements: Reliability in remote handling software

    Alho, P. & Mattila, J., 2013, In : Fusion Engineering and Design. 88, 9-10, p. 1912-1915 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    A measurement-integrated solution for particle image velocimetry and volume fraction measurements in a fluidized bed

    Kolehmainen, J., Elfvengren, J. & Saarenrinne, P., 2013, In : International Journal of Multiphase Flow. 56, p. 72-80 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Enhancement of the use of digital mock-ups in the verification and validation process for ITER remote handling systems

    Sibois, R., Salminen, K., Siuko, M., Mattila, J. & Määttä, T., 2013, In : Fusion Engineering and Design. 88, 9-10, p. 2190-2193 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Methods to reduce the CO2 concentration of educational buildings utilizing internal ventilation by transferred air

    Kalema, T. & Viot, M., 2013, In : Indoor Air. p. 1-10 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    On the solution of non-linear diffusion equation

    Kouhia, R., 2013, In : Rakenteiden mekaniikka. 46, 4, p. 116-130 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Analysis of the stress raising action of flaws in laser clad deposits

    Alam, M. M., Kaplan, A. F. H., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkala, J., Peltola, T. & Barsoum, Z., 2013, In : Materials and Design. 46, April, p. 328-337 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    The effect of contact edge geometry on fretting fatigue behavior in complete contacts

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 2013, In : Wear. 308, 1-2, p. 206-212 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    A New Hybrid Approach for Augmented Reality Maintenance in Scientific Facilities

    Martinez, H., Laukkanen, S. & Mattila, J., 2013, In : international Journal of Advanced Robotic Systems. 10, p. 1-10 10 p., 321.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Sliding wear of TiC-NiMo and Cr3C2-Ni cermet particles reinforced FeCrSiB matrix HVOF sprayed coatings

    Surzhenkov, A., Antonov, M., Goljandin, D., Vilgo, T., Mikli, V., Viljus, M., Latokartano, J. & Kulu, P., 2013, In : Estonian Journal of Engineering. 19, 3, p. 203-211 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Tribological behavior of bronze alloys with solid lubricants

    Kallio, M., Vuorinen, P., Fluentes, E., Marana, O., Ruusila, V., Nyyssönen, T., Kuokkala, V-T. & Lehtovaara, A., 2013, In : Key Engineering Materials. 527, p. 205-210 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Numerical modeling and experimentation of dynamic Brazilian disc test on Kuru granite

    Saksala, T., Hokka, M., Kuokkala, V-T. & Mäkinen, J., 2013, In : International Journal of Rock Mechanics and Mining Sciences. 59, April, p. 128-138 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Time-critical cooperative path following of multiple unmanned aerial vehicles over time-varying networks

    Xargay, E., Kaminer, I., Pascoal, A., Hovakimyan, N., Dobrokhodov, V., Cichella, V., Aguiar, A. P. & Ghabcheloo, R., 2013, In : Journal of Guidance Control and Dynamics. 36, 2, p. 499-516 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Reliability requirements management for ITER Remote Handling maintenance systems

    Väyrynen, J. & Mattila, J., 2013, In : Fusion Engineering and Design. 88, 9-10, p. 1920-1923 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Modeling of Long-Term Behavior of Glassy Polymers

    Holopainen, S. & Wallin, M., 2013, In : Journal of Engineering Materials and Technology: Transactions of the ASME. 135, 1, 11 p., 011001.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Semantics-Based Composition of Factory Automation Processes Encapsulated by Web Services

    Puttonen, J., Lobov, A. & Martinez Lastra, J. L., 2013, In : IEEE Transactions on Industrial Informatics. 9, 4, p. 2349-2359 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Effects of strain and strain rate on the abrasive wear behavior of high manganese austenitic steel

    Lindroos, M., Kuokkala, V-T., Lehtovaara, A. & Kivikytö-Reponen, P., 2013, In : Key Engineering Materials. 527, p. 211-216 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Katsaus mikropolaariseen kontinuumimalliin

    Kouhia, R., 2013, In : Rakenteiden mekaniikka. 46, 3, p. 70-90 21 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Modeling of the mechanical behavior of amorphous glassy polymers under variable loadings and comparison with state-of-the-art model predictions

    Holopainen, S., 2013, In : Mechanics of Materials. 66, p. 35-58 24 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Magnetomechanical coupled FE simulations of rotating electrical machines

    Belahcen, A., Fonteyn, K., Kouhia, R., Rasilo, P. & Arkkio, A., 2013, In : COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 32, 5, p. 1484-1499 16 p., 17095978.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    Palkin teknisen taivutusteorian historiasta

    Saksala, T., 2013, In : Rakenteiden mekaniikka. 46, 3, p. 55-69 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Surface pore initiated fatigue failure in laser clad components

    Alam, M. M., Powell, J., Kaplan, A. F. H., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkala, J. & Peltola, T., 2013, In : Journal of Laser Applications. 25, 3, p. 032004/1-6 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    The effect of microstructure and lead content on the tribological properties of bearing alloys

    Ruusila, V., Nyyssönen, T., Kallio, M., Vuorinen, P., Lehtovaara, A., Valtonen, K. & Kuokkala, V-T., 2013, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 227, 8, p. 878-887 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Development of a complete contact fretting test device

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 2013, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 227, 6, p. 570-578

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Divertor cassette locking system remote handling trials with WHMAN at DTP2

    Lyytikäinen, V., Kinnunen, P., Koivumäki, J., Mattila, J., Siuko, M., Esque, S. & Palmer, J., 2013, In : Fusion Engineering and Design. 88, 9-10, p. 2181-2185 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Evidence against a correlation between ease of use and actual use of a device in a walk-in virtual environment

    Tiainen, T., Ellman, A. & Kaapu, T., 2013, In : Human Technology: An Interdisciplinary Journal on Humans in ICT Environments Human Technology. 9, 1, p. 56-71 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Weighting function selection problem in the Galerkin method

    Salonen, E-M., Kouhia, R. & Holopainen, R., 2013, In : International Journal of Mechanical Engineering Education. 41, 2, p. 115-135 21 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    Displacement control of a mobile crane using a digital hydraulic power management system

    Heikkilä, M. & Linjama, M., 2013, In : Mechatronics. 23, 4, p. 452-461 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    Super-FRS target area remote handling: Scenario and development

    Orona, L. M., Weick, H., Mattila, J., Amjad, F., Kozlova, E., Karagiannis, C., Behr, K-H. & Winkler, M., 2013, In : international Journal of Advanced Robotic Systems. 10, p. 1-9 9 p., 386.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    Conjugate heat transfer in a plate - One surface at constant temperature and the other cooled by forced or natural convection

    Lindstedt, M. & Karvinen, R., 2013, In : International Journal of Heat and Mass Transfer. 66, p. 489-495 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Fretting fatigue and friction of quenched and tempered steel in dry contact with aluminum bronze

    Hintikka, J., Lehtovaara, A. & Mäntylä, A., 2013, In : Wear. 308, 1-2, p. 155-165 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    Survey on Remote Handling Logistics for Super-FRS Regular Paper

    Amjad, F., Weick, H., Mattila, J., Orona, L. M., Kozlova, E., Winkler, M., Behr, K-H. & Karagiannis, C., 2013, In : international Journal of Advanced Robotic Systems. 10, p. 1-14 14 p., 348.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    Interoperability of remote handling control system software modules at Divertor Test Platform 2 using middleware

    Tuominen, J., Rasi, T., Mattila, J., Siuko, M., Esque, S. & Hamilton, D., 2013, In : Fusion Engineering and Design. 88, 9-10, p. 2177-2180 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    Micro and desktop factories for micro/meso-scale manufacturing applications and future visions

    Tuokko, R., Järvenpää, E., Heikkilä, R. & Nurmi, A., 2013, In : Applied Mechanics and Materials. 289, 2, p. 1-12 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Recognition of Operating States of a Wheel Loader for Diagnostics Purposes

    Krogerus, T., Hyvönen, M. & Huhtala, K., 2013, In : SAE International Journal of Commercial Vehicles. 6, 2, p. 1-7 7 p., 2013-01-2409.

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    Out-of-plane elastic buckling of truss beams

    Kouhia, R. & Fedoroff, A., 2013, In : Structural Engineering and Mechanics. 45, 5, p. 613-629 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    Implementation of a direct procedure for critical point computations using preconditioned iterative solvers

    Kouhia, R., Tůma, M., Mäkinen, J., Fedoroff, A. & Marjamäki, H., Oct 2012, In : Computers & Structures. 108-109, p. 110-117 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    Disrupted flow sensing impairs hydrodynamic performance and increases the metabolic cost of swimming in the yellowtail kingfish, Seriola Lalandi

    Yanase, K., Herbert, N. A. & Montgomery, J. C., 2012, In : Journal of Experimental Biology. 215, 22, p. 3944-3954

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    Two-step Exact Solution for Modified Mohr-Coulomb Viscoplastic Consistency Model with Linear Hardening/Softening: A Proof with Maple Software

    Saksala, T., 2012, In : American Journal of Computational and Applied Mathematics. 2, 1, p. 41-45

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    An agent-based system for orchestration support of web service-enabled devices in discrete manufacturing systems

    Villasenor Herrera, V., Vidales Ramos, A. & Martinez Lastra, J., 2012, In : Journal of Intelligent Manufacturing. 23, 6, p. 2681-2702

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Measuring and Modelling Hydraulic Fluid Dynamics at High Pressure - Accurate and Simple Approach

    Karjalainen, J-P., Karjalainen, R. & Huhtala, K., 2012, In : International Journal of Fluid Power. 13, 2, p. 51-59

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Is the future of fluid power digital?

    Scheidl, R., Linjama, M. & Schmidt, S., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 226, 6, p. 721-723

    Research output: Contribution to journalArticleScientificpeer-review

  43. Published

    Digital Imaging and Piezo-dispenser Actuator in Automatic Flocculation Control

    Tomperi, J., Honkanen, M., Kallio, P., Leiviskä, K., Saarenrinne, P., Joensuu, I. & Piironen, M., 2012, In : Sensors and Transducers. 136, 1, p. 83-95

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    Development of a test device for the evaluation of journal bearings

    Sandvik, K., Lehtovaara, A., Makkonen, E., Kallio, M., Kuvaja, K. & Kuokkala, V-T., 2012, In : Tribologia - Finnish Journal of Tribology. 31, 1-2, p. 12-21

    Research output: Contribution to journalArticleScientificpeer-review

  45. Published

    Optimum Geometry of Plate Fins

    Karvinen, R. & Karvinen, T., 2012, In : Journal of Heat Transfer: Transactions of the ASME. 134, 8, p. 081801-1 - 081801-7 081801.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Velocity and Angle of Spatter in Fine Laser Processing

    Okamoto, Y., Yamamoto, H., Okada, A., Shirasaya, K. & Kolehmainen, J. T., 2012, In : Physics Procedia. 39, p. 792-799 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Contribution of maxwell stress in air on the deformations of induction machines

    Fonteyn, K. A., Belahcen, A., Rasilo, P., Kouhia, R. & Arkkio, A., 2012, In : Journal of Electrical Engineering and Technology. 7, 3, p. 336-341 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    A Holistic View on Design and Development of Manufacturing Systems

    Nylund, H. & Andersson, P. H., 2012, In : Procedia CIRP. 3, p. 388-393

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Ontology-based context-sensitive computing for FMS optimization

    Uddin, K. M., Puttonen, J., Scholze, S., Dvoryanchikova, A. & Martinez Lastra, J. L., 2012, In : Assembly Automation. 32, 2, p. 163-174

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    Use of Analytical Expressions of Convection in Conjugated Heat transfer Problems

    Karvinen, R., 2012, In : Journal of Heat Transfer: Transactions of the ASME. 134, 3, p. 1-9 9 p., 031007.

    Research output: Contribution to journalArticleScientificpeer-review

  51. Published

    Automotive transmission system design based on reliability parameters

    Douzi, I. K., Virtanen, S. & Verma, A. K., 2012, In : Journal of Reliability and Statistical Studies. 5, 2, p. 2229-5666

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.