Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. A1 Journal article-refereed
  2. Published

    Considering aspects of lean, agility, and sustainability in digital manufacturing systems

    Nylund, H., Kirman, B., Koho, M., Tapaninaho, M. & Torvinen, S., 2012, In : International Journal of Advanced Manufacturing Systems. 14, 2, p. 9-16

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    On the equivalence of minimum compliance and stress-constrained minimum weight design of trusses under multiple loading conditions

    Mela, K. & Koski, J., 2012, In : Structural and Multidisciplinary Optimization. 46, 5, p. 679-691

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Direct computation of critical equilibrium states for spatial beams and frames

    Mäkinen, J., Kouhia, R., Fedoroff, A. & Marjamäki, H., 2012, In : International Journal for Numerical Methods in Engineering. 89, 2, p. 135-153

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Data analysis process of working hydraulics of small mobile machine

    Krogerus, T., Rokala, M. & Koskinen, K. T., 2012, In : International Journal of Fluid Power. 13, 3, p. 5-15

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    Sensor module for hydraulic boom state feedback control

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2012, In : International Journal of Fluid Power. 13, 3, p. 15-23

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    A Petri net-based approach to incremental modelling of flow and resources in service-oriented manufacturing systems

    Popescu, C., Cavia Soto, M. & Martinez Lastra, J. L., 2012, In : International Journal of Production Research. 50, 2, p. 325-343

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    An Exceptional Generalization of the Poisson Distribution

    Hagmark, P-E., 2012, In : Open Journal of Statistics. 2, p. 313-318

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Optimized laser processing of calibration blocks for grinding burn detection with Barkhausen noise

    Santa-aho, S., Vippola, M., Sorsa, A., Lindgren, M., Latokartano, J., Leiviskä, K. & Lepistö, T., 2012, In : Journal of Materials Processing Technology. 212, p. 2282-2293

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Optimization of isothermal plate fin arrays with laminar forced convection

    Lindstedt, M. & Karvinen, R., 2012, In : Journal of Enhanced Heat Transfer. 19, 6, p. 535-547

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Detection and isolation of leakage and valve faults in hydraulic systems in varying loading conditions, Part 2: Fault detection and isolation scheme

    Nurmi, J. & Mattila, J., 2012, In : International Journal of Fluid Power. 13, 1, p. 17-27

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Optimization of Plate Fin Arrays with Laminar and Turbulent Forced Convection

    Lindstedt, M. & Karvinen, R., 2012, In : Journal of Physics: Conference Series. 395, p. 1-8 8 p., 012059.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Precise online auto-focus system in high speed laser micromachining applications

    Määttänen, A., Hautala, V. & Vihinen, J., 2012, In : Physics Procedia. 39, p. 807-813

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    On Three Competing Maintenance Actions and the Related Condition Control

    Hagmark, P-E., 2011, In : International Journal of Quality, Statistics, and Reliability. 2011, p. 1-6 6 p., 637079.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Minimizing the Maximum Curvature of Quadratic Bezier Curves with a Tetragonal Concave Polygonal Boundary Constraint

    Choi, J., Curry, R. E. & Elkaim, G. H., 2011, In : Computer-Aided Design. 44, 4, p. 1-22 22 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Modelling and analysis of fretting wear in rough point contacts in partial slip conditions

    Lehtovaara, A. & Lönnqvist, C., 2011, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 225, 10, p. 986-998

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    The Effects of Laser Welding on the Heterogeneous Immunoassay Performance in a Microfluidic Cartridge

    Mäntymaa, A., Halme, J., Välimaa, L. & Kallio, P., 2011, In : Biomicrofluidics. 5, 4, p. 1-11 11 p., 046504.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Lagrangian tracking of bubbles interacting with pin-fins in a microchannel

    Honkanen, M., Elcock, D., Kuo, C-J., Peles, Y. & Amitay, M., 2011, In : Experiments in Fluids. 50, 6, p. 1527-1538

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Real-time markerless Augmented Reality for Remote Handling system in bad viewing conditions

    Ziaei, Z., Hahto, A., Mattila, J., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2033-2038

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Lasin karkaisun laatuongelmat

    Aronen, A., 2011, In : Rakenteiden mekaniikka. 44, 2, p. 140-155

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    Command and Control application framework for interoperable heterogeneous ITER Remote Handling devices

    Tuominen, J., Muhammad, A., Mattila, J., Aha, L., Saarinen, H., Siuko, M., Hamilton, D. & Semerero, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2067-2070

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Energy efficiency in double disc refining - Influence of intensity by segment design

    Muhic, D., Huhtanen, J-P., Sundström, L., Sandberg, C., Ullmar, M., Vuorio, P. & Engstrand, P., 2011, In : Nordic Pulp and Paper Research Journal. 3, p. 1-8 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    DTP2 control room operator and remote handing operation designer responsibilities and information available to them

    Aha, L., Salminen, K., Hahto, A., Saarinen, H., Mattila, J., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2078-2081

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    On the orientation probability distribution of flexible fibres in a contracting channel flow

    Niskanen, H., Eloranta, H., Tuomela, J. & Hämäläinen, J., 2011, In : International Journal of Multiphase Flow. 37, 4, p. 336-345

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Numerical modelling of bit-rock fracture mechanisms in percussive drilling with a continuum approach

    Saksala, T., 2011, In : International Journal for Numerical and Analytical Methods in Geomechanics. 35, 13, p. 1483-1505

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Bubble dynamics and interactions with a pair of micro pillars in tandem

    Elcocka, D., Honkanen, M., Kuoc, C., Amitaya, M. & Pelesa, Y., 2011, In : International Journal of Multiphase Flow. 37, 5, p. 440-452

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Modelling and evaluation of the fretting fatigue cracking risk in smooth spherical contacts

    Lehtovaara, A., Rabb, R. & Pasanen, A., 2011, In : Tribology International. 44, 11, p. 1526-1534

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    Categorization of ITER remote handling operations

    Salminen, K., Aha, L., Saarinen, H., Siuko, M., Mattila, J. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2075-2077

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    Detection and isolation of leakage and valve faults in hydraulic systems in varying loading conditions, Part 1: Global sensitivity analysis

    Nurmi, J. & Mattila, J., 2011, In : International Journal of Fluid Power. 12, 3, p. 41-51

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    Genetic optimization of a fast solenoid actuator for a digital hydraulic valve

    Pellikka, M., Ahola, V., Söderlund, L. & Uusitalo, J-P., 2011, In : International Journal of Fluid Power. 12, 2, p. 49-56

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Analytical solution for a class of flat plate conjugate convective heat transfer problems

    Lehtinen, A. & Karvinen, R., 2011, In : Frontiers in Heat and Mass Transfer. 2, p. 1-6 6 p., 043004.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    Effect of start-up schemes and amplitude of tangential motion on friction behavior in fretting point contact

    Hintikka, J., Lehtovaara, A. & Lönnqvist, C., 2011, In : Tribology International. 44, 11, p. 1535-1543

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    Framework for extended digital manufacturing systems

    Nylund, H. & Andersson, P. H., 2011, In : International Journal of Computer Integrated Manufacturing. 24, 5, p. 446-456

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    Low temperature nanoparticle sintering with continuous wave and pulse lasers

    Kumpulainen, T., Pekkanen, J., Valkama, J., Laakso, J., Tuokko, R. & Mäntysalo, M., 2011, In : Optics and laser technology. 43, 3, p. 570-576

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    On design and development of additional End-Effectors for the Cassette Multifunctional Mover

    Valkama, P., Mattila, J., Amjad, F., Väyrynen, J., Vilenius, M., Siuko, M., Semeraro, L. & Esque, S., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 1946-1949

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    Results of CMM standalone tests at DTP2

    Saarinen, H., Kivelä, T., Zhai, L., Hämäläinen, V., Karjalainen, J-P., Aha, L., Heikkilä, L., Mäkinen, H., Järvenpää, J., Kiviranta, S., Krassi, B., Viinikainen, M., Siuko, M., Mattila, J., Esque, S. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 1907-1910

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    Analysis of the new architecture proposal for the CMM control system

    Heikkilä, L., Saarinen, H., Aha, L., Viinikainen, M., Mattila, J., Hahto, A., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2071-2074

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    Ubiquitous Integration of Cooperating Objects

    Karnouskos, S., Villasenor, V., Handte, M. & Marron, P. J., 2011, In : International Journal of Next-Generation Computing. 2, 3, p. 1-19 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    Optimal design of stiffened plate using metamodeling techniques

    Heinonen, O. & Pajunen, S., 2011, In : Rakenteiden mekaniikka. 44, 3, p. 218-230

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    Two-step Exact Solution for Mohr-Coulomb Viscoplastic Consistency Model with Linear Hardening/Softening: A Proof with Maple Software

    Saksala, T., 2011, In : American Journal of Computational and Applied Mathematics. 1, 1, p. 1-3 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    An implementation of a semantic, web-based virtual machine laboratory prototyping environment

    Salonen, J., Nykänen, O., Ranta, P., Nurmi, J., Helminen, M., Rokala, M., Palonen, T., Alarotu, V., Koskinen, K. & Pohjolainen, S., 2011, In : Lecture Notes in Computer Science. 7032, p. 221-236

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Supervisory system for DTP2 remote handling operations

    Hahto, A., Aha, L., Nurminen, T., Aaltonen, A., Heikkilä, L., Mattila, J., Siuko, M., Saarinen, H. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2047-2050

    Research output: Contribution to journalArticleScientificpeer-review

  43. Published

    Calibration and compensation of deflections and compliances in remote handling equipment configurations

    Kivelä, T., Saarinen, H., Mattila, J., Hämäläinen, V., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2043-2046

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    Concept design of the cassette toroidal mover

    Mäkinen, H., Järvenpää, J., Valkama, P., Väyrynen, J., Amjad, F., Siuko, M., Mattila, J., Semeraro, L. & Esque, S., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2092-2095

    Research output: Contribution to journalArticleScientificpeer-review

  45. Published

    Robust control of Cassette Multi-functional Mover for ITER remote handling tasks

    Zhai, L., Mattila, J., Saarinen, H. & Virvalo, T., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2008-2011

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Advantage of redundancy in the controllability of remote handling manipulator

    Muhammad, A., Mattila, J., Vilenius, M., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 1882-1885

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    What do information reuse and automated processing require in engineering design? Semantic process

    Nykänen, O., Salonen, J., Markkula, M., Ranta, P., Rokala, M., Helminen, M., Alarotu, V., Nurmi, J., Palonen, T., Koskinen, K. T. & Pohjolainen, S., 2011, In : Journal of Industrial Engineering and Management. 4, 4, 329.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    Reel-to-reel inline atmospheric plasma deposition of hydrophobic coatings

    Nättinen, K., Nikkola, J., Minkkinen, H., Heikkilä, P., Lavonen, J-P. & Tuominen, M., 2011, In : Journal of Coatings Technology and Research. 8, 2, p. 235-245

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Predicting the runtime reliability of ITER Remote Handling maintenance equipment

    Väyrynen, J., Mattila, J., Vilenius, M., Ali, M., Valkama, P., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2012-2015

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    A Semantic web services-based approach for production systems control

    Puttonen, J., Lobov, A., Cavia Soto, M. A. & Martinez Lastra, J. L., 2010, In : Advanced Engineering Informatics. 24, 3, p. 285-299

    Research output: Contribution to journalArticleScientificpeer-review

  51. Published

    Automated object locator in a forest forwarder

    Hahto, A., Mattila, J. & Koivisto, H., 2010, In : Applied Artificial Intelligence. 24, 7, p. 711-721

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.