Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. B3 Non-refereed article in conference proceedings
  2. Published

    On vibroacoustic analysis of grinding contact vibrations

    Järvenpää, V-M., Yuan, L. & Kalbasi Shirvani, H., 2014, Proceedings of the 21st International Congress on Sound and Vibration, In Depth Sound and Vibration Research, 2014 ICSV21, 13-17 July, 2014, Beijing. Crocker, M. J., Pawelczyk, M. & Tian, J. (eds.). International Institute of Acoustics and Vibration (IIAV), p. 2431-2436 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  3. Published

    Mapping of stress raising in laser clad components depending on geometry and defects

    Kaplan, F. H., Alam, M. M., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkala, T., Peltola, T. & Barsoum, Z., 2014, 67the IIW Annual Assembly & International Conference, 13th-18th July, 2014 Sheraton Grande Walkerhill & W Seoul Walkerhill, Seoul, Korea. Doc.IV-1174-14. p. 1-14

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  4. Published

    A model for scheduling of employees using supplier selection

    Holopainen, S., 2014, Engineering optimization IV, Proceedings of the International Conference on Engineering Optimiztion (ENGOPT 2014), Lisbon, Portugal, 8-11 September 2014. Rodrigues, H. C., Herskovits, J., Mota Soares, C. M., Guedes, J. M., Araújo, A. L., Folgado, J. O., Moleiro, F. & Madeira, J. F. A. (eds.). The Netherlands: CRC Press/Balkema, p. 533-538 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  5. Published

    Reducing indoor temperatures in summer usging natural night cooling

    Viot, M. & Kalema, T., 2014, Sisäilmastoseminaari 2014, Messukeskus, Helsinki 13.3.2014.. Säteri, J. & Backman, H. (eds.). Espoo: SIY SISÄILMATIETO OY, p. 281-286 6 p. (SIY Raportti; no. 32).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  6. Published

    Sisäilman laadun parantaminen käyttämällä siirtoilmaa - Uusia ratkaisuja

    Kalema, T., Lassila, A-P. & Viot, M., 2014, Sisäilmastoseminaari 2014, Messukeskus, Helsinki 13.3.2014. Säteri, J. & Backman, H. (eds.). Espoo: SIY SISÄILMATIETO OY, p. 263-268 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  7. Published

    The influence of chatter vibration on the cylindrical transverse grinding machine spindle

    Kalbasi Shirvani, H., Yuan, L. & Järvenpää, V-M., 2014, Proceedings of the 21st International Congress on Sound and Vibration , In Depth Sound and Vibration Research, 2014, ICSV21, 13-17 July, 2014, Beijing, China. Crocker, M. J., Pawelczyk, M. & Tian, J. (eds.). International Institute of Acoustics and Vibration (IIAV), p. 3280-3287 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  8. Published

    Ventilation and indoor air quality in school buildings

    Kalema, T. & Viot, M., 2013, Sisäilmastoseminaari 2013, Messukeskus, Helsinki 13.3.2013. Säteri, J. & Backman, H. (eds.). SIY Sisäilmayhdistys ry, p. 91-96 6 p. (SIY Raportti; no. 31).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  9. Published

    Epäsuoran jäähdytyksen väliaineet - ominaisuudet ja niiden merkitys

    Ahlstedt, H., 2013, Kylmätekniikan koulutuspäivät, 24.1.-25.1.2013, Suomen kylmäyhdistys ry Julkaisu. Suomen kylmäyhdistys, p. 1-22 22 p. (Kylmätekniikan koulutuspäivät; no. 73).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  10. Published

    Radial compression behavior of Norway spruce at high strain-rate

    Moilanen, C., Björkqvist, T., Saarenrinne, P., Engberg, B. A. & Salminen, L., 2013, 8th International Fundamental Mechanical Pulp Research Seminar, 29 - 31 January, 2013, Åre, Sweden. p. 10-11 2 p. (International Fundamental Mechanical Pulp Research Seminar).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  11. Published

    Local compression behaviour of moist wood at quasi static state

    Björkqvist, T., Moilanen, C., Saarenrinne, P., Koivisto, J., Miksic, A., Alava, M., Salminen, L. & Engberg, B. A., 2013, 8th International Fundamental Mechanical Pulp Research Seminar, 29 - 31 January, 2013, Åre, Sweden. p. 47-48 2 p. (International Fundamental Mechanical Pulp Research Seminar).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  12. Published

    Stress raising in laser clad components depending on geometry and defects

    Kaplan, A. F. H., Alam, M. M., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkula, J., Peltola, T. & Barsoum, Z., 2013, The 14th Nordic Laser Materials Processing Conference, NOLAMP 14, August 26th - 28th 2013, Gothenburg, Sweden. Kaplan, A. & Engström, H. (eds.). Luleå: Luleå University of Technology, Department of Engineering Sciences and Mathematics, p. 281-292 12 p. (Nordic Laser Materials Processing Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  13. Published

    PLM state of the practice and future challenges in globally networked manufacturing companies

    Pulkkinen, A., Rissanen, N. & Vainio, V., 2013, Proceedings of the PDM2013 conference, The 1st PDM Forum for Finland-Russia Collaboration, 24.-25.4.2013, Lappeenranta. Huhtala, M. & Eskelinen, H. (eds.). Lappeenranta: Lappeenranta University of Technology, p. 69-75 7 p. (LUT Scientific and Expertise Publication. Tutkimusraportit; no. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  14. Published

    Workers' tacit knowledge transferred to conceptual design: the case of mobile work machine

    Tiainen, T., Ellman, A. & Kaapu, T., 2013, Co-Create 2013, The Boundary-Crossing Conference on Co-Design in Innovation. Smeds, R. & Irrmann, O. (eds.). Aalto University School of Science, Department of Industrial Engineering and Management, SimLab, p. 709-720 12 p. (Aalto University publication series SCIENCE + TECHNOLOGY; vol. 15, no. 2013).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  15. Published

    Considering product related aspects on design and development of production systems

    Nylund, H., Järvenpää, E. & Andersson, P. H., 2013, Proceedings of the PDM2013 conference, The 1st PDM Forum for Finland-Russia Collaboration, 24.-25.4.2013, Lappeenranta. Huhtala, M. & Eskelinen, H. (eds.). Lappeenranta: Lappeenranta University of Technology, p. 23-28 6 p. (LUT Scientific and Expertise Publication. Tutkimusraportit; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  16. Published

    On the numerical solution of a micropolar continuum model

    Kouhia, R. & Niemi, A. H., 2013, Proceedings of the 26th Nordic Seminar on Computational Mechanics, Oslo, 23 - 25 October, 2013. Logg, A., Mardal, K. A. & Massing, A. (eds.). Center for Biomedical Computing, Simula Research Laboratory, p. 128-131 4 p. (Nordic Seminar on Computational Mechanics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  17. Published

    Image Grey Scale Based Volume Fraction Measurements of Solid Granular Particles

    Kolehmainen, J., Elfvengren, J. & Saarenrinne, P., 2013, The 10th International Symposium on Particle Image Velocimetry - PIV13, Delft, The Netherlands, July 1-3, 2013. 8 p. (International Symposium on Particle Image Velocimetry).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  18. Published

    Lean, scalable and extendable ICT concept in a dynamically changing environment

    Lanz, M. & Tuokko, R., 2013, Proceedings of the PDM2013 conference, The 1st PDM Forum for Finland-Russia Collaboration, 24.-25.4.2013, Lappeenranta. Huhtala, M. & Eskelinen, H. (eds.). Lappeenranta: Lappeenranta University of Technology, p. 61-68 8 p. (LUT Scientific and Expertise Publication. Tutkimusraportit; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  19. Published

    The module system and its requirements for PDM/PLM systems

    Pakkanen, J., Lehtinen, J., Juuti, T. & Lehtonen, T., 2013, Proceedings of the PDM2013 conference, The 1st PDM Forum for Finland-Russia Collaboration, 24.-25.4.2013, Lappeenranta. Huhtala, M. & Eskelinen, H. (eds.). Lappeenranta: Lappeenranta University of Technology, p. 91-97 7 p. (LUT Scientific and Expertise Publications. Tutkimusraportit; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  20. Published

    Glass tempering modeling

    Schneider, J., Karvinen, R. & Nielsen, J., 2012, COST Training School "Structural Glass", Presentation Handouts, Ghent University, Ghent, Belgium, April 2-6, 2012. University Press BVBA, p. 281-309 (COST Action TU0905 "Structural Glass - Novel Design Methods and Next Generation Products").

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  21. Published

    A holistic view on design and development of manufacturing systems

    Nylund, H. & Andersson, P. H., 2012, Proceedings of the 45th CIRP CMC Conference on Manufacturing Systems Technology. Chryssolouris, G. & Mourtzis, D. (eds.). p. 438-443 (CIRP Conference on Manufacturing Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  22. Published

    Prediction of the Transient Effects in Glassy Polymers

    Holopainen, S., 2012, Proceedings of the 11th Finnish Mechanics Days. XI Suomen Mekaniikkapäivät, Oulun yliopisto 29.-30.11.2012. Hannu, K. & Mikko, M. (eds.). Oulu: Oulun yliopisto, p. 9-14 (Finnish Mechanics Days. Suomen Mekaniikkapäivät).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  23. Published

    Proportional valve control of water-hydraulic systems

    Sairiala, H. & Koskinen, K. T., 2012, Topic water hydraulics, Dutch Fluid Power Conference, Ede, The Netherlands 13th September 2012. Vereniging Platform Hydrauliek, p. 49-63 (Dutch Fluid Power Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  24. Published

    Magnetomechanical Coupled FE Simulations of Rotating Electrical Machines

    Belahceen, A., Fonteyn, K., Kouhia, R., Rasilo, P. & Arkkio, A., 2012, 15th International IGTE Symposium on Numerical Field Calculations in Electrical Engineering, 16-19.2012, Graz, Austria. Institut für Grundlagen und Theorie der Elektrotechnik - IGTE, Technische Universität Graz, Austria, p. 1-6 6 p. (International IGTE Symposium on Numerical Field Calculations in Electrical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  25. Published

    A New Method and Format for Describing CANopen System Topology

    Helminen, M., Salonen, J., Saha, H., Nykänen, O., Koskinen, K. T., Ranta, P. & Pohjolainen, S., 2012, Proceedings of the 13th International CAN Conference, iCC 2012 in Hambach Castle, March 5 to March 6, Germany. CAN in Automation e.V., p. 1-8 8 p. (International CAN Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  26. Published

    Concept of the electro-water-hydraulic hybrid mobile machine

    Aaltonen, J., Sairiala, H. & Koskinen, K. T., 2012, Topic water hydraulics, Dutch Fluid Power Conference, Ede, The Netherlands 13th September 2012. p. 97-111 15 p. (Dutch Fluid Power Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  27. Published

    Urban Eco-Factory compatibility of residential and industrial zones

    Leino, T., Salminen, K. & Joutsiniemi, A., 2011, The 6th International Conference on Industrial Ecology, ISIE 2011, 7-10 June, 2011, University of California, Berkeley, USA. Berkeley, CA: International Society for Industrial Ecology, p. 1-9 9 p. (International Conference on Industrial Ecology ISIE).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  28. Published

    Damping of oscillatory rolling contact by piezoelectric actuators

    Töhönen, M., Keskinen, E. & Seemann, W., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA. New York, NY: ASME, p. 1-8 8 p. (ASME International Mechanical Engineering Congress and Exposition IMECE2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  29. Published

    Hydrodynamic added mass and damping of the Kaplan turbine

    Keto-Tokoi, J. M., Matusiak, J. E. & Keskinen, E. K., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA. New York, NY: ASME, p. 1-13 13 p. (ASME International Mechanical Engineering Congress and Exposition IMECE2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  30. Published

    An approach to service deployment to the service cloud

    Puttonen, J., Lobov, A. & Martinez Lastra, J. L., 2011, GlobeNet 2011, The Sixth International Conference on Systems, ICONS 2011, 23-28 January, 2011, St. Maarten, The Netherlands Antilles. St. Maarten: IARIA, p. 122-127 (International Conference on Systems ICONS GlobeNet).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  31. Published

    Development of intelligent gripper systems for microfactories

    Heikkilä, R., Prusi, T., Ha, T. H., Song, J. Y., Lee, C. W. & Tuokko, R., 2011, 7th International Workshop on Micromanufacturing Technology, IWMT 2011, 18 August, 2011, Jeju-do, Korea. Jeju-do: IWMT 2011, p. 26-28 (International Workshop on Micromanufacturing Technology IWMT).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  32. Published

    Systeemiteoreettiset mallit liiketoiminnan kehittämisen tukena

    Huttunen, P. & Laurikkala, H., 2011, Automaatio XIX Seminaari, 15-16.3.2011, Helsinki. SAS julkaisusarja. Visala, A. (ed.). Helsinki: Suomen Automaatioseura, p. 1-6 6 p. (Automaatio Seminaari; vol. 41).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  33. Published

    CSM-Hotel - A new manufacturing concept for small and medium enterprises

    Nylund, H., Toivonen, V., Salminen, K. & Tuokko, R., 2011, 44th CIRP Conference on Manufacturing systems, May 31-June 3, 2011, Madison, WI, USA. Madison, WI: The International Academy for Production Engineering CIRP, p. 1-7 7 p. (CIRP Conference on Manufacturing Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  34. Published

    Mikro- ja Desktop-tuotantojärjestelmät

    Heikkilä, R., Vuola, A., Prusi, T., Siltala, N. & Tuokko, R., 2011, Automaatio XIX Seminaari, 15-16.3.2011, Helsinki. SAS julkaisusarja. Visala, A. (ed.). Helsinki: Suomen Automaatioseura, p. 1-6 6 p. (Automaatio Seminaari; vol. 41).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  35. Published

    Simulation and advanced control of transient behaviour in gyratory cone crushers

    Itävuo, P., Jaatinen, A. & Vilkko, M., 2011, 8th International Mineral Processing Seminar, Santiago, Chile, 30.11-2.12.2011. Kracht, W., Kuyvenhoven, R., Lynch-Watson, S. & Montes-Atenas, G. (eds.). Santiago: Gecamin, p. 63-72 (International Mineral Processing Seminar).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  36. Published

    Fast size distribution estimation of crushed rock aggregate using laserprofilometry

    Taskinen, A., Vilkko, M., Itävuo, P. & Jaatinen, A., 2011, Preprints of the 18th IFAC World Congress, August 28 - September 2, 2011, Milano, Italy. Bittanti, S., Cenedese, A. & Zampieri, S. (eds.). Milano: IFAC, p. 12132-12137 (IFAC World Congress).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  37. Published

    Requirement considerations for ubiquitous integration of cooperation objects

    Karnouskos, S., Villasenor Herrera, V., Haroon, M., Handte, M. & Marron, P. J., 2011, 4th IFIP International Conference on New Technologies, Mobility and Security, NTMS 2011, 7-10 February, 2011, Paris, France. Piscataway, NJ: IEEE, p. 1-5 5 p. (IFIP International Conference on New Technologies, Mobility and Security NTMS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  38. Published

    Mechanical Glass Tempering - Present Products and Future Challenges

    Aronen, A. & Karvinen, R., 2011, GPD Glass Performance Days 2011, 12th International Conference on Architectural and Automotive Glass, 17-20 June 2011, Tampere, Finland. Vitkala, J. (ed.). Tampere: International Conference on Architectural and Automotive Glass, p. 122-125 (International Conference on Architectural and Automotive Glass GPD Glass Performance Days).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  39. Published

    Impact Modeling by Manifold Approach in Explicit Transient Dynamics

    Saksala, T. & Mäkinen, J., 2011, COMPDYN 2011, 3rd International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 25-28 May 2011, Corfu, Greece. Corfu: COMPDYN, p. 1-13 13 p. (International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering COMPDYN).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  40. Published

    Viewpoints on digital, Virtual, and real aspects of manufacturing systems

    Nylund, H. & Andersson, P. H., 2011, Proceedings of the 7th International Conference on Digital Enterprise Technology, DET 2011, 28-30 September, 2011, Athens, Greece. Chryssolouris, G. & Mourtzis, D. (eds.). Athens: University of Patras, Laboratory for Manufacturing Systems and Automation, p. 504-511 (International Conference on Digital Enterprise Technology DET).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  41. Published

    Collapse Simulations of Flexible Multibody Systems

    Mäkinen, J., 2011, Proceedings of the 24th Nordic Seminar on Computational Mechanics. Aalto University publication series. SCIENCE + TECHNOLOGY. Freund, J. & Kouhia, R. (eds.). Espoo: Aalto University, p. 221-222 (Nordic Seminar on Computational Mechanics; vol. 23/2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  42. Published

    Thermoelastic response of thin-walled cylindrical shell under the effect of moving point load and heas source

    Keskinen, E., Karvinen, T., Dospel, V. & Cotsaftis, M., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA. New York, NY: ASME, p. 1-10 10 p. (ASME International Mechanical Engineering Congress and Exposition IMECE2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  43. Published

    Dynamics of Stress Wave Propagation during Percussive Drilling Process

    Keskinen, E., Karvinen, T., Montonen, J. & Heinonen, M., 2011, 13th World Congress in Mechanism and Machine Science, Guanajuato, Mexico, 19-25 June, 2011. Guanajuato: Universidad de Guanajuato, p. 1-5 5 p. (World Congress in Mechanism and Machine Science).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  44. Published

    Researching PLM process in industry - Case of benchmarking ECM

    Pulkkinen, A., Markova, T. & Rissanen, N., 2011, The 8th International Conference on Product Lifecycle Management, PLM11, 11-13 July, 2011, Technische Universiteit Eindhoven, The Netherlands. Eindhoven: IFIP, p. 1-10 10 p. (International Conference on Product Lifecycle Management PLM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  45. Published

    Current state and future expectations of sustainable development and sustainable production in the Finnish manufacturing industry

    Tapaninaho, M., Koho, M. & Torvinen, S., 2011, Proceedings of the 9th Global Conference on Sustainable Manufacturing in St. Petersburg, 28-30 September, 2011, Saint Petersburg, Russia. Seliger, G. (ed.). Berlin: Technische Universität Berlin, p. 302-307 (Global Conference on Sustainable Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  46. Published

    A holistic view on modelling and simulation in the context of an intelligent manufacturing environment

    Nylund, H., Lanz, M., Tuokko, R. & Andersson, P. H., 2011, 21st International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2011, 26-29 June, 2011, Taichung, Taiwan. Taichung: FAIM 2011, p. 801-808 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  47. Published

    Support-condition analyses of rotating beams under distributed imbalance loading

    Jokinen, K., Keskinen, E., Jorkama, M. & Seemann, W., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA. New York, NY: ASME, p. 325-334 (ASME International Mechanical Engineering Congress and Exposition IMECE2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  48. Published

    Effects of team role assessment in problem based group work learning

    Vanhatalo, M., Lehtonen, T., Hälikkä, A., Pakkanen, J. & Juuti, T., 2011, Design education for creativity and business innovation, proceedings of the 13th International Conference on Engineering and product design education, E&PDE 2011, 8-9 September, 2011, City University of London, UK. Kovacevic, A., Ion, W., McMahon, C., Buck, L. & Hogarth, P. (eds.). London: City University, p. 193-198 (International Conference on Engineering and Product Design Education E&PDE).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  49. Published

    Numerical Simulation of Dynamic Brazilian Disc Test on Rock

    Saksala, T., Hokka, M., Kuokkala, V-T. & Mäkinen, J., 2011, Proceedings of the 24th Nordic Seminar on Computational Mechanics, Aalto University publication series. SCIENCE + TECHNOLOGY. Freund, J. & Kouhia, R. (eds.). Espoo: Aalto University, p. 154-157 (Nordic Seminar on Computational Mechanics; vol. 23/2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  50. Published

    Is what you see really what you get? - Case study of virtual prototyping in designing the production process

    Becker, I. & Toivonen, V., 2011, 22nd Symposium on Design for X, 11-12 October, 2011, Tutzing, Germany. Glasgow: The Design Society, p. 253-264 (Symposium on Design for X).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  51. Published

    Continuous Models of Elastic Roll on Various Supports

    Jokinen, K. & Keskinen, E., 2011, 13th World Congress in Mechanism and Machine Science, Guanajuato, Mexico, 19-25 June, 2011. Guanajuato: Universidad de Guanajuato, p. 1-9 9 p. IMD-123. (World Congress in Mechanism and Machine Science).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

Previous 12 3 4 5 6 7 8 9 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.