Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. A1 Journal article-refereed
  2. Published

    Shedding frequency in cavitation erosion evolution tracking

    Ylönen, M., Franc, J. P., Miettinen, J., Saarenrinne, P. & Fivel, M., 1 Sep 2019, In : International Journal of Multiphase Flow. 118, p. 141-149 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    Adiabatic Heating of Austenitic Stainless Steels at Different Strain Rates

    Vazquez-Fernandez, N. I., Soares, G. C., Smith, J. L., Seidt, J. D., Isakov, M., Gilat, A., Kuokkala, V. T. & Hokka, M., 20 Jun 2019, In : Journal of Dynamic Behavior of Materials.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Mass balance control of crushing circuits

    Itävuo, P., Hulthén, E., Yahyaei, M. & Vilkko, M., May 2019, In : Minerals Engineering. 135, p. 37-47 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Nonlinear model predictive energy management of hydrostatic drive transmissions

    Backas, J. & Ghabcheloo, R., 1 Mar 2019, In : Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. 233, 3, p. 335-347

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    An open modelling approach for availability and reliability of systems

    Penttinen, J-P., Niemi, A., Gutleber, J., Koskinen, K., Coatanea, E. & Laitinen, J., Mar 2019, In : Reliability Engineering and System Safety. 183, p. 387-399 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    A novel method of vibration modes selection for improving accuracy of frequency-based damage detection

    Pan, J., Zhang, Z., Wu, J., Ramakrishnan, K. & Singh, H. K., 15 Feb 2019, In : Composites Part B : Engineering. 159, p. 437-446 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    The development of an ontology for describing the capabilities of manufacturing resources

    Järvenpää, E., Siltala, N., Hylli, O. & Lanz, M., Feb 2019, In : Journal of Intelligent Manufacturing. 30, 2, p. 959-978 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Knowledge-based optimization of artificial neural network topology for additive manufacturing process modeling: a case study for fused deposition modeling: A new approach and case study for fused deposition modeling

    Nagarajan, H. P. N., Mokhtarian, H., Jafarian, H., Dimassi, S., Bakrani Balani, S., Hamedi, A., Coatanea, E., Wang, G. G. & Kari R., H., Feb 2019, In : Journal of Mechanical Design. 141, 2

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Why social sustainability counts: The impact of corporate social sustainability culture on financial success

    Schönborn, G., Berlin, C., Pinzone, M., Hanisch, C., Georgoulias, K. & Lanz, M., 1 Jan 2019, In : Sustainable Production and Consumption. 17, p. 1-10 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Microstructure-property relationships of novel ultra-high strength press hardening steels

    Järvinen, H., Honkanen, M., Oja, O., Järvenpää, M. & Peura, P., 2019, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50, 2, p. 816-836 21 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Customized dimensional analysis conceptual modelling framework for design optimization—a case study on the cross-flow micro turbine model

    Woldemariam, E. T., Coatanéa, E., Wang, G. G., Lemu, H. G. & Wu, D., 2019, In : Engineering Optimization. 51, 7, p. 1168-1184

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Identifying and addressing challenges in the engineering design of modular systems – case studies in the manufacturing industry

    Pakkanen, J., Juuti, T. & Lehtonen, T., 29 Nov 2018, In : Journal of Engineering Design. 30 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Cavitation erosion resistance assessment and comparison of three francis turbine runner materials

    Ylönen, M., Saarenrinne, P., Miettinen, J., Franc, J-P., Fivel, M. & Nyyssönen, T., 26 Oct 2018, In : Materials Performance and Characterization. 7, 5, p. 1107-1126 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Utilizing SPIN rules to infer the parameters for combined capabilities of aggregated manufacturing resources

    Järvenpää, E., Hylli, O., Siltala, N. & Lanz, M., Sep 2018, In : IFAC-PapersOnLine. 51, 11, p. 84-89 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    An executable capability concept in formal resource descriptions

    Siltala, N., Järvenpää, E. & Lanz, M., Sep 2018, In : IFAC-PapersOnLine. 51, 11, p. 102-107 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Experimental and numerical study of wall layer development in a tribocharged fluidized bed

    Sippola, P., Kolehmainen, J., Ozel, A., Liu, X., Saarenrinne, P. & Sundaresan, S., 25 Aug 2018, In : Journal of Fluid Mechanics. 849, p. 860-884 25 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Problematics of friction in a high-speed rubber-wheel wear test system: A case study of irregularly rough steel in water lubricated contact

    Ismailov, A., Järveläinen, M. & Levänen, E., 15 Aug 2018, In : Wear. 408-409, p. 65-71

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    High surface quality welding of aluminum using adjustable ring-mode fiber laser

    Maina, M. R., Okamoto, Y., Okada, A., Närhi, M., Kangastupa, J. & Vihinen, J., 1 Aug 2018, In : Journal of Materials Processing Technology. 258, p. 180-188 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    A new method to optimize natural convection heat sinks

    Lampio, K. & Karvinen, R., Aug 2018, In : Heat and Mass Transfer/Waerme- und Stoffuebertragung. 54, 8, p. 2571-2580

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    Impact loading history modulates hip fracture load and location: A finite element simulation study of the proximal femur in female athletes

    Abe, S., Narra Girish, N., Nikander, R., Hyttinen, J., Kouhia, R. & Sievänen, H., 25 Jul 2018, In : Journal of Biomechanics. 76, p. 136-143 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Vibration-based assessment of delaminations in FRP composite plates

    Zhang, Z., He, M., Liu, A., Singh, H. K., Ramakrishnan, K. R., Hui, D., Shankar, K. & Morozov, E., 1 Jul 2018, In : Composites Part B : Engineering. 144, p. 254-266 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Value proposition of a resource description concept in a production automation domain

    Siltala, N., Järvenpää, E. & Lanz, M., 27 Jun 2018, In : Procedia CIRP. 72, p. 1106-1111 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    A performance evaluation concept for production systems in an SME network

    Mahmood, K., Lanz, M., Toivonen, V. & Otto, T., 27 Jun 2018, In : Procedia CIRP. 72, p. 603-608 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Product Model ontology and its use in capability-based matchmaking

    Järvenpää, E., Siltala, N., Hylli, O. & Lanz, M., 27 Jun 2018, In : Procedia CIRP. 72, p. 1094-1099

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Gap Formation During Cyclic Testing of Flexor Tendon Repair

    Linnanmäki, L., Göransson, H., Havulinna, J., Sippola, P., Karjalainen, T. & Leppänen, O. V., Jun 2018, In : Journal of Hand Surgery. 43, 6, p. 570.e1-570.e8

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    A conceptual design and modeling framework for integrated additive manufacturing

    Mokhtarian, H., Coatanea, E., Paris, H., Mansor Mbow, M., Pourroy, F., René Marin, P., Vihinen, J. & Ellman, A., 28 Apr 2018, In : Journal of Mechanical Design. 140, 8, 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    A concept and local implementation for industry-academy collaboration and life-long learning

    Lanz, M., Lobov, A., Katajisto, K. & Mäkelä, P., 23 Apr 2018, In : Procedia Manufacturing. 23, p. 189-194 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    The FMS Training Center - a versatile learning environment for engineering education

    Toivonen, V., Lanz, M., Nylund, H. & Nieminen, H., 23 Apr 2018, In : Procedia Manufacturing. 23, p. 135-140 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    Online quality evaluation of tissue paper structure on new generation tissue machines

    Raunio, J-P., Löyttyniemi, T. & Ritala, R., 26 Mar 2018, In : Nordic Pulp and Paper Research Journal. 33, 1, p. 133-141 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Economic analysis of hydrogen production by methane thermal decomposition: Comparison to competing technologies

    Keipi, T., Tolvanen, H. & Konttinen, J., 1 Mar 2018, In : Energy Conversion and Management. 159, p. 264-273 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    An experimental investigation of scuffing initiation due to axial displacement in a rolling/sliding contact

    Savolainen, M. & Lehtovaara, A., Mar 2018, In : Tribology International. 119, p. 688-697

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    Analysis of common rail pressure signal of dual-fuel large industrial engine for identification of injection duration of pilot diesel injectors

    Krogerus, T., Hyvönen, M. & Huhtala, K., Mar 2018, In : Fuel. 216, p. 1-9

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    Effect of glass temperature before cooling and cooling rate on residual stresses in tempering

    Aronen, A. & Karvinen, R., Mar 2018, In : Glass Structures Engineering. 3, 1, p. 3-15

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    UV-Blocking Synthetic Biopolymer from Biomass-Based Bifuran Diester and Ethylene Glycol

    Kainulainen, T. P., Sirviö, J. A., Sethi, J., Hukka, T. I. & Heiskanen, J. P., 21 Feb 2018, In : Macromolecules. 51, 5, p. 1822-1829 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    Formal resource and capability models supporting re-use of manufacturing resources

    Järvenpää, E., Lanz, M. & Siltala, N., Feb 2018, In : Procedia Manufacturing. 19, p. 87-94 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    Model-based force and position tracking control of a multi-pressure hydraulic cylinder

    Linjama, M. & Huova, M., Jan 2018, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 232, 3, p. 324-335

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    Conjugated Heat Transfer Simulation of a Fin-and-Tube Heat Exchanger

    Välikangas, T. & Karvinen, R., 2018, In : Heat Transfer Engineering. 39, 13-14, p. 1192-1200 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    High-Linear Digital Hydraulic Valve Control by an Equal Coded Valve System and Novel Switching Schemes

    Paloniitty, M. & Linjama, M., 2018, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 232, 3, p. 258-269

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    An approach to investigating subsurface fatigue in a rolling/sliding contact

    Savolainen, M. & Lehtovaara, A., 2018, In : International Journal of Fatigue. 117, p. 180-188

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Micro Manufacturing Unit and the Corresponding 3D-Model for the Digital Twin

    Lohtander, M., Garcia, E., Lanz, M., Volotinen, J., Ratava, J. & Kaakkunen, J., 2018, In : Procedia Manufacturing. 17, p. 55-61

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Landowners’ willingness to promote bioenergy production on wasteland − future impact on land use of cutaway peatlands

    Laasasenaho, K., Lensu, A., Rintala, J. & Lauhanen, R., 1 Dec 2017, In : Land Use Policy. 69, p. 167-175 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  43. Published

    Adaptive and nonlinear control of discharge pressure for variable displacement axial piston pumps

    Koivumäki, J. & Mattila, J., 1 Oct 2017, In : Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME. 139, 10, 101008.

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    Modelling Capabilities for Functional Configuration of Part Feeding Equipment

    Hansson, M. N., Järvenpää, E., Siltala, N. & Madsen, O., 18 Sep 2017, In : Procedia Manufacturing. 11, p. 2051-2060 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Published

    Transforming ETO Businesses with Enhanced PLM Capabilities

    Pulkkinen, A., Leino, S-P. & Papinniemi, J., 18 Sep 2017, In : Procedia Manufacturing. 2017, 11C, p. 1642-1650 8 p., PROMFG27700.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Capability Matchmaking Procedure to Support Rapid Configuration and Re-configuration of Production Systems

    Järvenpää, E., Siltala, N., Hylli, O. & Lanz, M., Sep 2017, In : Procedia Manufacturing. 11, p. 1053-1060 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Feed-hopper level estimation and control in cone crushers

    Itävuo, P., Hulthén, E. & Vilkko, M., 15 Aug 2017, In : Minerals Engineering. 110, p. 82-95 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    Dynamics of a True Moving Bed separation process: Linear model identification and advanced process control

    Nogueira, I. B. R., Ribeiro, A. M., Martins, M. A. F., Rodrigues, A. E., Koivisto, H. & Loureiro, J. M., 30 Jun 2017, In : Journal of Chromatography A. 1504

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Influence of strain rate, temperature and fatigue on the radial compression behaviour of Norway spruce

    Moilanen, C., Björkqvist, T., Ovaska, M., Koivisto, J., Miksic, A., Engberg, B. A., Salminen, L. I., Saarenrinne, P. & Alava, M., 27 Jun 2017, In : Holzforschung. 71, 6, p. 505-514 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    Concepts, methods and tools for individualized production

    Lanz, M. & Tuokko, R., 1 Apr 2017, In : PRODUCTION ENGINEERING. 11, 2, p. 205-212 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  51. Published

    Conjugated heat transfer from a uniformly heated plate and a plate fin with uniform base heat flux

    Lindstedt, M. & Karvinen, R., Apr 2017, In : International Journal of Heat and Mass Transfer. 107, p. 89-95 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.