Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    Effect of silane integrated sol-gel derived in situ silica on the properties of nitrile rubber

    Kapgate, B. P., Das, C., Basu, D., Das, A., Heinrich, G. & Reuter, U., 5 Aug 2014, In : Journal of Applied Polymer Science. 131, 15, 40531.

    Research output: Contribution to journalArticleScientificpeer-review

  2. Published

    Effect of sol-gel derived in situ silica on the morphology and mechanical behavior of natural rubber and acrylonitrile butadiene rubber blends

    Kapgate, B. P., Das, C., Das, A., Basu, D., Reuter, U. & Heinrich, G., Sep 2012, In : JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY. 63, 3, p. 501-509 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    Effect of spraying parameters on the microstructural and corrosion properties of HVAF-sprayed Fe-Cr-Ni-B-C coatings

    Milanti, A., Matikainen, V., Koivuluoto, H., Bolelli, G., Lusvarghi, L. & Vuoristo, P., 15 Sep 2015, In : Surface and Coatings Technology. 277, p. 81-90 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Effect of surface morphology of poly(ïμ-caprolactone) scaffolds on adipose stem cell adhesion and proliferation

    Diban, N., Haimi, S. P., Bolhuis-Versteeg, L., Teixeira, S., Miettinen, S., Poot, A. A., Grijpma, D. W. & Stamatialis, D., Dec 2013, In : Macromolecular symposia. 334, 1, p. 126-132 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Effect of temperature and concentration of precursors on morphology and photocatalytic activity of zinc oxide thin films prepared by hydrothermal route

    Heinonen, S., Nikkanen, J. P., Hakola, H., Huttunen-Saarivirta, E., Kannisto, M., Hyvärinen, L., Järveläinen, M. & Levänen, E., 15 Apr 2016, 3rd International Conference on Competitive Materials and Technology Processes (IC-CMTP3) . ( IOP Conference Series: Materials Science and Engineering; vol. 123).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Effect of the addition of Al2O3, TiO2 and ZnO on the thermal, structural and luminescence properties of Er3+-doped phosphate glasses

    Lopez-Iscoa, P., Petit, L., Massera, J., Janner, D., Boetti, N. G., Pugliese, D., Fiorilli, S., Novara, C., Giorgis, F. & Milanese, D., 15 Mar 2017, In : Journal of Non-Crystalline Solids. 460, p. 161-168 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Effect of the glass melting condition on the processing of phosphate-based glass-ceramics with persistent luminescence properties

    Massera, J., Gaussiran, M., Głuchowski, P., Lastusaari, M., Petit, L., Hölsä, J. & Hupa, L., 1 Feb 2016, In : Optical Materials. 52, p. 56-61 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    Effects of bioactive glass S53P4 or beta-tricalcium phosphate and bone morphogenetic protein-2 and bone morphogenetic protein-7 on osteogenic differentiation of human adipose stem cells

    Waselau, M., Patrikoski, M., Juntunen, M., Kujala, K., Kääriäinen, M., Kuokkanen, H., Sándor, G. K., Vapaavuori, O., Suuronen, R., Mannerström, B., von Rechenberg, B. & Miettinen, S., 2012, In : Journal of Tissue Engineering. 3, 1, p. 1-14 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Effects of chitosan and bioactive glass modifications of knitted and rolled polylactide-based 96/4L/D scaffolds on chondrogenic differentiation of adipose stem cells

    Ahtiainen, K., Sippola, L., Nurminen, M., Mannerström, B., Haimi, S., Suuronen, R., Hyttinen, J., Ylikomi, T., Kellomäki, M. & Miettinen, S., 1 Jan 2015, In : Journal of Tissue Engineering and Regenerative Medicine. 9, 1, p. 55-65 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Effects of composition and microstructure on the abrasive wear performance of quenched wear resistant steels

    Ojala, N., Valtonen, K., Heino, V., Kallio, M., Aaltonen, J., Siitonen, P. & Kuokkala, V. T., 15 Sep 2014, In : Wear. 317, 1-2, p. 225-232 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Effects of end-group termination on salting-out constants for triglycine

    Hladílková, J., Heyda, J., Rembert, K. B., Okur, H. I., Kurra, Y., Liu, W. R., Hilty, C., Cremer, P. S. & Jungwirth, P., 5 Dec 2013, In : Journal of Physical Chemistry Letters. 4, 23, p. 4069-4073 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Effects of insertion of strain-engineering Ga(In)NAs layers on optical properties of InAs/GaAs quantum dots for high-efficiency solar cells

    Pavelescu, E-M., Polojärvi, V., Schramm, A., Tukiainen, A., Aho, A., Zhang, W., Puustinen, J., Salmi, J. & Guina, M., 1 Feb 2016, In : Optical Materials. 52, p. 177-180 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Effects of Microstructure on the Dynamic Strain Aging in Ferritic-Pearlitic Steels

    Hokka, M., Rämö, J., Mardoukhi, A., Vuoristo, T., Roth, A. & Kuokkala, V. T., Dec 2018, In : Journal of Dynamic Behavior of Materials. 4, 4, p. 452-463

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Effects of PV array layout, electrical configuration and geographic orientation on mismatch losses caused by moving clouds

    Lappalainen, K. & Valkealahti, S., 1 Mar 2017, In : Solar Energy. 144, p. 548-555 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Effects of thinning and heating for TiO2/AlInP junctions

    Mäkelä, J., Tuominen, M., Yasir, M., Polojärvi, V., Aho, A., Tukiainen, A., Kuzmin, M., Punkkinen, M. P. J., Laukkanen, P., Kokko, K. & Guina, M., 24 Aug 2015, In : Journal of Electron Spectroscopy and Related Phenomena. 205, p. 6-9 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Efficient photon upconversion at remarkably low annihilator concentrations in a liquid polymer matrix: when less is more

    Durandin, N. A., Isokuortti, J., Efimov, A., Vuorimaa-Laukkanen, E., Tkachenko, N. V. & Laaksonen, T., 2018, In : Chemical Communications. 54, 99, p. 14029-14032 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Efficient surface structuring and photoalignment of supramolecular polymer-azobenzene complexes through rational chromophore design

    Vapaavuori, J., Valtavirta, V., Alasaarela, T., Mamiya, J. I., Priimagi, A., Shishido, A. & Kaivola, M., 21 Oct 2011, In : Journal of Materials Chemistry. 21, 39, p. 15437-15441 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Elastomer-carbon nanotube composites

    Fritzsche, J., Lorenz, H., Klüppel, M., Das, A., Jurk, R., Stöckelhuber, K. W. & Heinrich, G., Mar 2011, Polymer-Carbon Nanotube Composites: Preparation, Properties and Applications. Elsevier Science Ltd., p. 193-229 37 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  19. Published

    Elastomer composites based on carbon nanotubes and ionic liquid

    Subramaniam, K., Das, A., Stöckelhuber, K. W. & Heinrich, G., 2013, In : Rubber Chemistry and Technology. 86, 3, p. 367-400 34 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Electrical Contacts in SOI MEMS Using Aerosol Jet Printing

    Khorramdel, B., Torkkeli, A. & Mäntysalo, M., 2017, In : IEEE Journal of the Electron Devices Society. 6, p. 34-40

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    Electrolyte-gated organic field-effect transistor sensors based on supported biotinylated phospholipid bilayer

    Magliulo, M., Mallardi, A., Mulla, M. Y., Cotrone, S., Pistillo, B. R., Favia, P., Vikholm-Lundin, I., Palazzo, G. & Torsi, L., 11 Apr 2013, In : Advanced Materials. 25, 14, p. 2090-2094 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Electromagnetic interference shielding effectiveness of MWCNT filled poly(ether sulfone) and poly(ether imide) nanocomposites

    Mohanty, A. K., Ghosh, A., Sawai, P., Pareek, K., Banerjee, S., Das, A., Pötschke, P., Heinrich, G. & Voit, B., 1 Nov 2014, In : Polymer Engineering and Science. 54, 11, p. 2560-2570 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Electromagnetic nonlinearities in a Roebel-cable-based accelerator magnet prototype: Variational approach

    Ruuskanen, J., Stenvall, A., Lahtinen, V. & Pardo, E., 1 Feb 2017, In : Superconductor Science and Technology. 30, 2, 024008.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Electron at the surface of water: Dehydrated or not?

    Uhlig, F., Marsalek, O. & Jungwirth, P., 17 Jan 2013, In : Journal of Physical Chemistry Letters. 4, 2, p. 338-343 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Electro-optic steering of nematicons

    Assanto, G., Piccardi, A., Barboza, R. & Alberucci, A., 2012, In : Photonics Letters of Poland. 4, 1, p. 2-4 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Electro-optic steering of random laser emission in liquid crystals

    Assanto, G., Perumbilavil, S., Piccardi, A. & Kauranen, M., 2018, In : Photonics Letters of Poland. 10, 4, p. 103-105 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Electrospinning Polyaniline for Sensors

    Amariei, N., Manea, L. R., Bertea, A. P., Cramariuc, R., Bertea, A. & Cramariuc, O., 27 Jun 2017, International Conference on Innovative Research - ICIR Euroinvent 2017 25–26 May 2017, Iasi, Romania. IOP Publishing, ( IOP Conference Series: Materials Science and Engineering; vol. 209).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Electrospun Based Polyaniline Sensors - A Review

    Rozemarie, M. L., Andrei, B., Liliana, H., Cramariuc, R. & Cramariuc, O., 27 Jun 2017, International Conference on Innovative Research - ICIR Euroinvent 2017 25–26 May 2017, Iasi, Romania. IOP Publishing, (IOP Conference Series: Materials Science and Engineering; vol. 209).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Electrospun Black Titania Nanofibers: Influence of Hydrogen Plasma-Induced Disorder on the Electronic Structure and Photoelectrochemical Performance

    Lepcha, A., Maccato, C., Mettenbörger, A., Andreu, T., Mayrhofer, L., Walter, M., Olthof, S., Ruoko, T. P., Klein, A., Moseler, M., Meerholz, K., Morante, J. R., Barreca, D. & Mathur, S., 20 Aug 2015, In : Journal of Physical Chemistry C. 119, 33, p. 18835-18842 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    Elevated and cryogenic temperature micropillar compression of magnesium–niobium multilayer films

    Thomas, K., Mohanty, G., Wehrs, J., Taylor, A. A., Pathak, S., Casari, D., Schwiedrzik, J., Mara, N., Spolenak, R. & Michler, J., 15 Aug 2019, In : Journal of Materials Science. 54, 15, p. 10884-10901 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Emission measurements with gravimetric impactors and electrical devices: An aerosol instrument comparison

    Salo, L., Mylläri, F., Maasikmets, M., Niemelä, V., Konist, A., Vainumäe, K., Kupri, H. L., Titova, R., Simonen, P., Aurela, M., Bloss, M., Keskinen, J., Timonen, H. & Rönkkö, T., 1 Mar 2019, In : Aerosol Science and Technology. 53, 5, p. 526-539 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    Encapsulation of secondary and tertiary ammonium salts by resorcinarenes and pyrogallarenes: The effect of size and charge concentration

    Beyeh, N. K., Pan, F., Valkonen, A. & Rissanen, K., 7 Feb 2015, In : CrystEngComm. 17, 5, p. 1182-1188 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    End-plate connections in Bi-axial bending - Measurements

    Mäkinen, J., Fränti, K., Korhonen, M., Fillion, J. & Heinisuo, M., 2016, 13th International Aluminium Conference, Sustainability, Durability and Structural Advantages, : INALCO 2016; Naples; Italy; 21 September 2016 through 23 September 2016. Mazzolani, F. M., Squillace, A., Faggiano, B. & Bellucci, F. (eds.). Trans Tech Publications Ltd, Vol. 710. p. 275-280 6 p. (Key Engineering Materials; vol. 710).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Energetic origin of proton affinity to the air/water interface

    Takahashi, H., Maruyama, K., Karino, Y., Morita, A., Nakano, M., Jungwirth, P. & Matubayasi, N., 28 Apr 2011, In : Journal of Physical Chemistry Part B. 115, 16, p. 4745-4751 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Energy density-method: An approach for a quick estimation of quench temperatures in high-field accelerator magnets

    Salmi, T. & Schoerling, D., Jun 2019, In : IEEE Transactions on Applied Superconductivity. 29, 4

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    Energy-dependent diffusion in a soft periodic Lorentz gas

    Gil-Gallegos, S., Klages, R., Solanpää, J. & Räsänen, E., 1 May 2019, In : European Physical Journal: Special Topics. 228, 1, p. 143-160 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    Engineering of Chern insulators and circuits of topological edge states

    Minarelli, E. L., Poÿhönen, K., Van Dalum, G. A. R., Ojanen, T. & Fritz, L., 10 Apr 2019, In : Physical Review B. 99, 16, 165413.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    Enhanced multiaxial fatigue criterion that considers stress gradient effects

    Ottosen, N. S., Ristinmaa, M. & Kouhia, R., 1 Nov 2018, In : International Journal of Fatigue. 116, p. 128-139 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    Enhanced-performance wireless conformal "smart skins" utilizing inkjet-printed carbon-nanostructures

    Le, T., Lin, Z., Wong, C. P. & Tentzeris, M. M., 11 Sep 2014, Proceedings - Electronic Components and Technology Conference. Institute of Electrical and Electronics Engineers Inc., p. 769-774 6 p. 6897372

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Enhanced pre-treatment of cellulose pulp prior to dissolution into NaOH/ZnO

    Grönqvist, S., Kamppuri, T., Maloney, T., Vehviläinen, M., Liitiä, T. & Suurnäkki, A., Dec 2015, In : Cellulose. 22, 6, p. 3981-3990 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Enhanced resonant nonlinear absorption and optical limiting in Er3+ ions doped multicomponent tellurite glasses

    Sajna, M. S., Perumbilavil, S., Prakashan, V. P., Sanu, M. S., Joseph, C., Biju, P. R. & Unnikrishnan, N. V., 1 Aug 2018, In : Materials Research Bulletin. 104, p. 227-235 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Enhanced thermal stability of polychloroprene rubber composites with ionic liquid modified MWCNTs

    Subramaniam, K., Das, A., Häußler, L., Harnisch, C., Stöckelhuber, K. W. & Heinrich, G., May 2012, In : Polymer Degradation and Stability. 97, 5, p. 776-785 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  43. Published

    Enhancement of adhesion and promotion of osteogenic differentiation of human adipose stem cells by poled electroactive poly(vinylidene fluoride)

    Parssinen, J., Hammarén, H., Rahikainen, R., Sencadas, V., Ribeiro, C., Vanhatupa, S., Miettinen, S., Lanceros-Méndez, S. & Hytönen, V. P., 1 Mar 2015, In : Journal of Biomedical Materials Research. Part A. 103, 3, p. 919-928 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    Entrapped Styrene Butadiene Polymer Chains by Sol-Gel-Derived Silica Nanoparticles with Hierarchical Raspberry Structures

    Vaikuntam, S. R., Stöckelhuber, K. W., Subramani Bhagavatheswaran, E., Wießner, S., Scheler, U., Saalwächter, K., Formanek, P., Heinrich, G. & Das, A., 15 Feb 2018, In : Journal of Physical Chemistry B. 122, 6, p. 2010-2022 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Published

    Epitaxial phases of high Bi content GaSbBi alloys

    Hilska, J., Koivusalo, E., Puustinen, J., Suomalainen, S. & Guina, M., 15 Jun 2019, In : Journal of Crystal Growth. 516, p. 67-71 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Equipment for obtaining polimeric nanofibres by electrospinning technology: II. The obtaining of polimeric nanofibers

    Manea, L. R., Cramariuc, B., Popescu, V., Cramariuc, R., Sandu, I. & Cramariuc, O., 1 Jun 2015, In : Materiale Plastice. 52, 2, p. 180-185 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Er3+-Al2O3 nanoparticles doping of borosilicate glass

    Massera, J., Petit, L., Koponen, J., Glorieux, B., Hupa, L. & Hupa, M., Sep 2015, In : Bulletin of Materials Science. 38, 5, p. 1407-1410 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    Erbium-doped borosilicate glasses containing various amounts of P2O5 and Al2O3: Influence of the silica content on the structure and thermal, physical, optical and luminescence properties

    Bourhis, K., Massera, J., Petit, L., Koponen, J., Fargues, A., Cardinal, T., Hupa, L., Hupa, M., Dussauze, M., Rodriguez, V. & Ferraris, M., 1 Oct 2015, In : Materials Research Bulletin. 70, p. 47-54 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Erosion–corrosion resistance of various stainless steel grades in high-temperature sulfuric acid solution

    Lindgren, M., Siljander, S., Suihkonen, R., Pohjanne, P. & Vuorinen, J., 15 Oct 2016, In : Wear. 364-365, p. 10-21 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    Erosion wear of vinylester matrix composites in aqueous and acidic environments at elevated temperatures

    Suihkonen, R., Lindgren, M., Siljander, S., Sarlin, E. & Vuorinen, J., 15 Jul 2016, In : Wear. 358-359, p. 7-16 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  51. Published

    Erosion wear performance of WC-10Co4Cr and Cr 3 C 2 -25NiCr coatings sprayed with high-velocity thermal spray processes

    Matikainen, V., Rubio Peregrina, S., Ojala, N., Koivuluoto, H., Schubert, J., Houdková & Vuoristo, P., 25 Jul 2019, In : Surface and Coatings Technology. 370, p. 196-212 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  52. Published

    Erosive-abrasive wear behavior of carbide-free bainitic and boron steels compared in simulated field conditions

    Vuorinen, E., Heino, V., Ojala, N., Haiko, O. & Hedayati, A., 2018, In : Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 232, 1, p. 3-13 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  53. Published

    Erosive wear of filled vinylester composites in water and acidic media at elevated temperature

    Sarlin, E., Saarimäki, M., Sironen, R., Lindgren, M., Siljander, S., Kanerva, M. & Vuorinen, J., 15 Nov 2017, In : Wear. 390-391, p. 84-92 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  54. Published

    Erosive wear of various stainless steel grades used as impeller blade materials in high temperature aqueous slurry

    Lindgren, M., Suihkonen, R. & Vuorinen, J., 5 Apr 2015, In : Wear. 328-329, p. 391-400 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  55. Published

    ESD qualification data used as the basis for building electrostatic discharge protected areas

    Tamminen, P., Viheriäkoski, T., Sydänheimo, L. & Ukkonen, L., 1 Oct 2015, In : Journal of Electrostatics. 77, p. 174-181 8 p., 3024.

    Research output: Contribution to journalArticleScientificpeer-review

  56. Published

    Essential Measurements for Finite Element Simulations of Magnetostrictive Materials

    Poutala, A., Kovanen, T. & Kettunen, L., 2018, In : IEEE Transactions on Magnetics. 54, 1, 7200107.

    Research output: Contribution to journalArticleScientificpeer-review

  57. Published

    Evaluating the toughness of APS and HVOF-sprayed Al2O3-ZrO2-coatings by in-situ- and macroscopic bending

    Kiilakoski, J., Musalek, R., Lukac, F., Koivuluoto, H. & Vuoristo, P., 2018, In : Journal of the European Ceramic Society. 38, 4, p. 1908-1918

    Research output: Contribution to journalArticleScientificpeer-review

  58. Published

    Evaluating transparent liquid screen overlay as a haptic conductor: Method of enhancing touchscreen based user interaction by a transparent deformable liquid screen overlay

    Farooq, A., Evreinov, G., Raisamo, R. & Takahata, D., 31 Dec 2015, 2015 IEEE SENSORS - Proceedings. Institute of Electrical and Electronics Engineers Inc., 7370186

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  59. Published

    Evaluation of a carbonation model for existing concrete facades and balconies by consecutive field measurements

    Köliö, A., Niemelä, P. J. & Lahdensivu, J., 2015, In : Cement and Concrete Composites. 65, p. 29-40 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  60. Published

    Evaluation of Aerosol, Superfine Inkjet, and Photolithography Printing Techniques for Metallization of Application Specific Printed Electronic Circuits

    Mashayekhi, M., Winchester, L., Evans, L., Pease, T., Laurila, M-M., Mäntysalo, M., Ogier, S., Teres, L. & Carrabina, J., 1 Mar 2016, In : IEEE Transactions on Electron Devices. 63, 3, p. 1246-1253 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  61. Published

    Evaluation of an oxidation catalyst ("catalytic stripper") in eliminating volatile material from combustion aerosol

    Amanatidis, S., Ntziachristos, L., Giechaskiel, B., Katsaounis, D., Samaras, Z. & Bergmann, A., Mar 2013, In : Journal of Aerosol Science. 57, p. 144-155 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  62. Published

    Evaluation of crushing strength of spray-dried MgAl2O4 granule beds

    Kanerva, U., Suhonen, T., Lagerbom, J. & Levänen, E., 1 Aug 2015, In : Ceramics International. 41, 7, p. 8494-8500 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  63. Evaluation of internal thermophilic biotreatment as a strategy in TMP mill closure

    Jahren, S. J., Rintala, J. A. & Ødegaard, H., Aug 1999, In : TAPPI Journal. 82, 8, p. 141-149 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  64. Published

    Evaluation of long-term post process inactivation of bioleaching microorganisms

    Bomberg, M., Miettinen, H., Wahlström, M., Kaartinen, T., Ahoranta, S., Lakaniemi, A-M. & Kinnunen, P., 2017, 22nd International Biohydrometallurgy Symposium. Trans Tech Publications Ltd, p. 57-60 4 p. (Solid State Phenomena; vol. 262 SSP).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  65. Published

    Evaluation of screen printed silver trace performance and long-term reliability against environmental stress on a low surface energy substrate

    Mikkonen, R. & Mäntysalo, M., 1 Jul 2018, In : Microelectronics Reliability. 86, p. 54-65 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  66. Published

    Exciton localization and structural disorder of GaAs1-xBix/GaAs quantum wells grown by molecular beam epitaxy on (311)B GaAs substrates

    Prando, G. A., Orsi Gordo, V., Puustinen, J., Hilska, J., Alghamdi, H. M., Som, G., Gunes, M., Akyol, M., Souto, S., Rodrigues, A. D., Galeti, H. V. A., Henini, M., Gobato, Y. G. & Guina, M., 17 Jul 2018, In : Semiconductor Science and Technology. 33, 8, 084002.

    Research output: Contribution to journalArticleScientificpeer-review

  67. Published

    'Expanded organoclay' assisted dispersion and simultaneous structural alterations of multiwall carbon nanotube (MWCNT) clusters in natural rubber

    Rooj, S., Das, A., Stöckelhuber, K. W., Wießner, S., Fischer, D., Reuter, U. & Heinrich, G., 1 Feb 2015, In : Composites Science and Technology. 107, p. 36-43 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  68. Published

    Experimental and Computational Study of the Temperatures Field Around a Chimney Roof Penetration

    Neri, M., Pilotelli, M., Leppänen, P., Pentti, M. & Bani, S., Nov 2016, In : Fire Technology. 52, 6, p. 1799–1823

    Research output: Contribution to journalArticleScientificpeer-review

  69. Published

    Experimental and numerical investigation of fretting fatigue behavior in bolted joints

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 1 Nov 2016, In : Tribology International. 103, p. 440-448 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  70. Published

    Experimental moment resistance of rectangular hollow section T joints

    Garifullin, M., 5 Dec 2018, In : MATEC Web of Conferences. 245, 08003.

    Research output: Contribution to journalConference articleScientificpeer-review

  71. Published

    Exploration of Two Layer Nb 3 Sn Designs of the Future Circular Collider Main Quadrupoles

    Lorin, C., Fleiter, J., Salmi, T. & Schoerling, D., 1 Aug 2019, In : IEEE Transactions on Applied Superconductivity. 29, 5, 4001005.

    Research output: Contribution to journalArticleScientificpeer-review

  72. Published

    Exploring ion-ion interactions in aqueous solutions by a combination of molecular dynamics and neutron scattering

    Kohagen, M., Pluhařová, E., Mason, P. E. & Jungwirth, P., 7 May 2015, In : Journal of Physical Chemistry Letters. 6, 9, p. 1563-1567 5 p.

    Research output: Contribution to journalReview ArticleScientificpeer-review

  73. Published

    Exploring the role of stearic acid in modified zinc aluminum layered double hydroxides and their acrylonitrile butadiene rubber nanocomposites

    Eshwaran, S. B., Basu, D., Vaikuntam, S. R., Kutlu, B., Wiessner, S., Das, A., Naskar, K. & Heinrich, G., 1 Mar 2015, In : Journal of Applied Polymer Science. 132, 9, 41539.

    Research output: Contribution to journalArticleScientificpeer-review

  74. Published

    Extending the Faraday cup aerosol electrometer based calibration method up to 5 µm

    Järvinen, A., Keskinen, J. & Yli-Ojanperä, J., 3 Aug 2018, In : Aerosol Science and Technology. 52, 8, p. 828-840 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  75. Published

    Extent of moisture and mould damage in structures of public buildings

    Annila, P. J., Hellemaa, M., Pakkala, T. A., Lahdensivu, J., Suonketo, J. & Pentti, M., 1 Jun 2017, In : Case Studies in Construction Materials. 6, p. 103-108 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  76. Published

    Fabrication and Characterization of Amorphous Alumina-Yttria-Stabilized Zirconia Coatings by Air Plasma Spraying

    Song, X., Suhonen, T., Varis, T., Huang, L., Zheng, X. & Zeng, Y., 25 Nov 2014, In : Journal of Thermal Spray Technology. 23, 8, p. 1302-1311 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  77. E-pub ahead of print

    Fabrication and Characterization of a Wireless Bioresorbable Pressure Sensor

    Palmroth, A., Salpavaara, T., Lekkala, J. & Kellomäki, M., 2019, In : Advanced Materials Technologies. 1900428.

    Research output: Contribution to journalArticleScientificpeer-review

  78. Published

    Fabrication and characterization of broadband superluminescent diodes for 2 μm wavelength

    Zia, N., Viheriälä, J., Koskinen, R., Koskinen, M., Suomalainen, S. & Guina, M., 2016, Light-Emitting Diodes: Materials, Devices, and Applications for Solid State Lighting XX. SPIE, 97680Q. (Proceedings of SPIE; vol. 9768).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  79. Published

    Fabrication and characterization of magnetic cotton yarns for textile applications

    Grosu, M. C., Lupu, I. G., Cramariuc, O. & Hogas, H. I., 2018, In : Journal of the Textile Institute. 109, 10, p. 1348-1359 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  80. Published

    Fabrication and performance evaluation of 3D-printed graphene passive UHF RFID tags on cardboard

    He, H., Akbari, M., Chen, X., Nommeots-Nomm, A., Chen, L., Ukkonen, L. & Virkki, J., 22 May 2017, 2017 Progress in Electromagnetics Research Symposium - Spring, PIERS 2017. IEEE, p. 3322-3325 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  81. Published

    Fabrication and reliability evaluation of passive UHF RFID T-shirts

    Chen, X., He, H., Ukkonen, L., Virkki, J., Lu, Y. & Lam, H., 8 Jun 2018, 2018 IEEE International Workshop on Antenna Technology, iWAT2018 - Proceedings. IEEE, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  82. Published

    Fabrication of 3-D nanodimensioned electric double layer capacitor structures using block copolymer templates

    Rasappa, S., Borah, D., Senthamaraikannan, R., Faulkner, C. C., Holmes, J. D. & Morris, M. A., 2014, In : Journal Nanoscience and Nanotechnology. 14, 7, p. 5221-5227 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  83. Published

    Fabrication of a sub-10 nm silicon nanowire based ethanol sensor using block copolymer lithography

    Rasappa, S., Borah, D., Faulkner, C. C., Lutz, T., Shaw, M. T., Holmes, J. D. & Morris, M. A., 15 Feb 2013, In : Nanotechnology. 24, 6, 065503.

    Research output: Contribution to journalArticleScientificpeer-review

  84. Published

    Fabrication of germanium nanowire arrays by block copolymer lithography

    Rasappa, S., Borah, D., Senthamaraikannan, R., Faulkner, C. C., Wang, J. J., Holmes, J. J. & Morris, M. M., 2013, In : SCIENCE OF ADVANCED MATERIALS. 5, 7, p. 782-787 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  85. Published

    Fabrication of soft devices with buried fluid channels by using sacrificial 3D printed molds

    Koivikko, A. & Sariola, V., 24 May 2019, 2019 2nd IEEE International Conference on Soft Robotics (RoboSoft). IEEE, p. 509-513 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  86. Published

    Fabrication of ssDNA/Oligo(ethylene glycol) monolayers and patterns by exchange reaction promoted by ultraviolet light irradiation

    Khan, M. N. & Zharnikov, M., 27 Nov 2013, In : Journal of Physical Chemistry C. 117, 47, p. 24883-24893 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  87. Published

    Fabrication of ssDNA/oligo(ethylene glycol) monolayers by promoted exchange reaction with thiol and disulfide substituents

    Khan, M. N. & Zharnikov, M., 13 Feb 2014, In : Journal of Physical Chemistry C. 118, 6, p. 3093-3101 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  88. Published

    Failure analysis of a leaching reactor made of glass-fiber reinforced plastic

    Lindgren, M., Bergman, G., Kakkonen, M., Lehtonen, M., Jokinen, J., Wallin, M., Saarela, O. & Vuorinen, J., 2016, In : Engineering Failure Analysis. 60, p. 117-136

    Research output: Contribution to journalArticleScientificpeer-review

  89. Published

    FCC-hh: The Hadron Collider: Future Circular Collider Conceptual Design Report Volume 3

    the FCC Collaboration, Abada, A., Abbrescia, M., AbdusSalam, S. S., Abdyukhanov, I., Abelleira Fernandez, J., Abramov, A., Aburaia, M., Acar, A. O., Adzic, P. R., Agrawal, P., Aguilar-Saavedra, J. A., Aguilera-Verdugo, J. J., Aiba, M., Aichinger, I., Aielli, G., Akay, A., Akhundov, A., Aksakal, H., Albacete, J. L., Albergo, S., Alekou, A., Aleksa, M., Aleksan, R., Alemany Fernandez, R. M., Alexahin, Y., Alía, R. G., Alioli, S., Alipour Tehrani, N., Allanach, B. C., Allport, P. P., Altınlı, M., Altmannshofer, W., Ambrosio, G., Amorim, D., Amstutz, O., Anderlini, L., Andreazza, A., Andreini, M., Andriatis, A., Andris, C., Andronic, A., Angelucci, M., Antinori, F., Antipov, S. A., Antonelli, M., Antonello, M., Lehtinen, T., Penttinen, J. P., Salmi, T. & Stenvall, A., 1 Jul 2019, In : European Physical Journal: Special Topics. 228, 4, p. 755-1107 353 p.

    Research output: Contribution to journalArticleScientificpeer-review

  90. Published

    Fe2O3-TiO2 nanosystems by a hybrid PE-CVD/ALD approach: controllable synthesis, growth mechanism, and photocatalytic properties

    Barreca, D., Carraro, G., Warwick, M. E. A., Kaunisto, K., Gasparotto, A., Gombac, V., Sada, C., Turner, S., Van Tendeloo, G., Maccato, C. & Fornasiero, P., 28 Aug 2015, In : CrystEngComm. 17, 32, p. 6219-6226 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  91. Published

    Feature Engineering for Mid-Price Prediction with Deep Learning

    Ntakaris, A., Mirone, G., Kanniainen, J., Gabbouj, M. & Iosifidis, A., 2019, In : IEEE Access. 7, p. 82390-82412 23 p.

    Research output: Contribution to journalArticleScientificpeer-review

  92. FEM for directly coupled magneto-mechanical phenomena in electrical machines

    Fonteyn, K., Belahcen, A., Kouhia, R., Rasilo, P. & Arkkio, A., Aug 2010, In : IEEE Transactions on Magnetics. 46, 8, p. 2923-2926 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  93. Published

    Final shape of precision molded optics: Part II - Validation and sensitivity to material properties and process parameters

    Ananthasayanam, B., Joseph, P. F., Joshi, D., Gaylord, S., Petit, L., Blouin, V. Y., Richardson, K. C., Cler, D. L., Stairiker, M. & Tardiff, M., 1 Jul 2012, In : JOURNAL OF THERMAL STRESSES. 35, 7, p. 614-636 23 p.

    Research output: Contribution to journalArticleScientificpeer-review

  94. Published

    Final shape of precision molded optics: Part I - Computational approach, material definitions and the effect of lens shape

    Ananthasayanam, B., Joseph, P. F., Joshi, D., Gaylord, S., Petit, L., Blouin, V. Y., Richardson, K. C., Cler, D. L., Stairiker, M. & Tardiff, M., 1 Jun 2012, In : JOURNAL OF THERMAL STRESSES. 35, 6, p. 550-578 29 p.

    Research output: Contribution to journalArticleScientificpeer-review

  95. Published

    Finite element method incorporating coupled magneto-elastic model for magneto-mechanical energy harvester

    Ahmed, U., Harju, J., Poutala, J., Ruuskanen, P., Rasilo, P. & Kouhia, R., 19 Jun 2017. 2 p.

    Research output: Other conference contributionPaper, poster or abstractScientific

  96. Published

    First Cold Powering Test of REBCO Roebel Wound Coil for the EuCARD2 Future Magnet Development Project

    Kirby, G. A., Van Nugteren, J., Bajas, H., Benda, V., Ballarino, A., Bajko, M., Bottura, L., Broekens, K., Canale, M., Chiuchiolo, A., Gentini, L., Peray, N., Perez, J. C., De Rijk, G., Rijllart, A., Rossi, L., Murtomaeki, J., Mazet, J., Pincot, F. O., Volpini, G., Durante, M., Fazilleau, P., Lorin, C., Stenvall, A., Goldacker, W., Kario, A. & Usoskin, A., 1 Jun 2017, In : IEEE Transactions on Applied Superconductivity. 27, 4, 4003307.

    Research output: Contribution to journalArticleScientificpeer-review

  97. Published

    First-principles atomistic study of surfaces of Fe-rich Fe-Cr

    Ropo, M., Kokko, K., Airiskallio, E., Punkkinen, M. P. J., Hogmark, S., Kollr, J., Johansson, B. & Vitos, L., 6 Jul 2011, In : Journal of Physics: Condensed Matter. 23, 26, 265004.

    Research output: Contribution to journalArticleScientificpeer-review

  98. Published

    First principles prediction of the solar cell efficiency of chalcopyrite materials AgMX 2 (M=In, Al; X=S, Se, Te)

    Dongho-Nguimdo, G. M., Igumbor, E., Zambou, S. & Joubert, D. P., 1 Dec 2019, In : Computational Condensed Matter. 21, e00391.

    Research output: Contribution to journalArticleScientificpeer-review

  99. Published

    Flexible Spectrum Management in a Smart City within Licensed Shared Access Framework

    Markova, E., Gudkova, I., Ometov, A., Dzantiev, I., Andreev, S., Koucheryavy, Y. & Samouylov, K., 2017, In : IEEE Access. 5, p. 22252-22261

    Research output: Contribution to journalArticleScientificpeer-review

  100. Published

    Flip-chip Wafer-fused OP-VECSELs emitting 3.65 W at the 1.55-μm waveband

    Mereuta, A., Nechay, K., Caliman, A., Suruceanu, G., Rudra, A., Gallo, P., Guina, M. & Kapon, E., 2019, In : IEEE Journal of Selected Topics in Quantum Electronics. 25, 6

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...11 Next
Download list To download, please limit the number of search results to 1,000 or less.