Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Article › Scientific › Peer-reviewed
  2. Published

    Fabrication of 3-D nanodimensioned electric double layer capacitor structures using block copolymer templates

    Rasappa, S., Borah, D., Senthamaraikannan, R., Faulkner, C. C., Holmes, J. D. & Morris, M. A., 2014, In : Journal Nanoscience and Nanotechnology. 14, 7, p. 5221-5227 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    Fabrication of a sub-10 nm silicon nanowire based ethanol sensor using block copolymer lithography

    Rasappa, S., Borah, D., Faulkner, C. C., Lutz, T., Shaw, M. T., Holmes, J. D. & Morris, M. A., 15 Feb 2013, In : Nanotechnology. 24, 6, 065503.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Fabrication of germanium nanowire arrays by block copolymer lithography

    Rasappa, S., Borah, D., Senthamaraikannan, R., Faulkner, C. C., Wang, J. J., Holmes, J. J. & Morris, M. M., 2013, In : SCIENCE OF ADVANCED MATERIALS. 5, 7, p. 782-787 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Fabrication of ssDNA/Oligo(ethylene glycol) monolayers and patterns by exchange reaction promoted by ultraviolet light irradiation

    Khan, M. N. & Zharnikov, M., 27 Nov 2013, In : Journal of Physical Chemistry C. 117, 47, p. 24883-24893 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    Fabrication of ssDNA/oligo(ethylene glycol) monolayers by promoted exchange reaction with thiol and disulfide substituents

    Khan, M. N. & Zharnikov, M., 13 Feb 2014, In : Journal of Physical Chemistry C. 118, 6, p. 3093-3101 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Failure analysis of a leaching reactor made of glass-fiber reinforced plastic

    Lindgren, M., Bergman, G., Kakkonen, M., Lehtonen, M., Jokinen, J., Wallin, M., Saarela, O. & Vuorinen, J., 2016, In : Engineering Failure Analysis. 60, p. 117-136

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    FCC-hh: The Hadron Collider: Future Circular Collider Conceptual Design Report Volume 3

    the FCC Collaboration, Abada, A., Abbrescia, M., AbdusSalam, S. S., Abdyukhanov, I., Abelleira Fernandez, J., Abramov, A., Aburaia, M., Acar, A. O., Adzic, P. R., Agrawal, P., Aguilar-Saavedra, J. A., Aguilera-Verdugo, J. J., Aiba, M., Aichinger, I., Aielli, G., Akay, A., Akhundov, A., Aksakal, H., Albacete, J. L., Albergo, S., Alekou, A., Aleksa, M., Aleksan, R., Alemany Fernandez, R. M., Alexahin, Y., Alía, R. G., Alioli, S., Alipour Tehrani, N., Allanach, B. C., Allport, P. P., Altınlı, M., Altmannshofer, W., Ambrosio, G., Amorim, D., Amstutz, O., Anderlini, L., Andreazza, A., Andreini, M., Andriatis, A., Andris, C., Andronic, A., Angelucci, M., Antinori, F., Antipov, S. A., Antonelli, M., Antonello, M., Lehtinen, T., Penttinen, J. P., Salmi, T. & Stenvall, A., 1 Jul 2019, In : European Physical Journal: Special Topics. 228, 4, p. 755-1107 353 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Fe2O3-TiO2 nanosystems by a hybrid PE-CVD/ALD approach: controllable synthesis, growth mechanism, and photocatalytic properties

    Barreca, D., Carraro, G., Warwick, M. E. A., Kaunisto, K., Gasparotto, A., Gombac, V., Sada, C., Turner, S., Van Tendeloo, G., Maccato, C. & Fornasiero, P., 28 Aug 2015, In : CrystEngComm. 17, 32, p. 6219-6226 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Feature Engineering for Mid-Price Prediction with Deep Learning

    Ntakaris, A., Mirone, G., Kanniainen, J., Gabbouj, M. & Iosifidis, A., 2019, In : IEEE Access. 7, p. 82390-82412 23 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. FEM for directly coupled magneto-mechanical phenomena in electrical machines

    Fonteyn, K., Belahcen, A., Kouhia, R., Rasilo, P. & Arkkio, A., Aug 2010, In : IEEE Transactions on Magnetics. 46, 8, p. 2923-2926 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Final shape of precision molded optics: Part II - Validation and sensitivity to material properties and process parameters

    Ananthasayanam, B., Joseph, P. F., Joshi, D., Gaylord, S., Petit, L., Blouin, V. Y., Richardson, K. C., Cler, D. L., Stairiker, M. & Tardiff, M., 1 Jul 2012, In : JOURNAL OF THERMAL STRESSES. 35, 7, p. 614-636 23 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Final shape of precision molded optics: Part I - Computational approach, material definitions and the effect of lens shape

    Ananthasayanam, B., Joseph, P. F., Joshi, D., Gaylord, S., Petit, L., Blouin, V. Y., Richardson, K. C., Cler, D. L., Stairiker, M. & Tardiff, M., 1 Jun 2012, In : JOURNAL OF THERMAL STRESSES. 35, 6, p. 550-578 29 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    First Cold Powering Test of REBCO Roebel Wound Coil for the EuCARD2 Future Magnet Development Project

    Kirby, G. A., Van Nugteren, J., Bajas, H., Benda, V., Ballarino, A., Bajko, M., Bottura, L., Broekens, K., Canale, M., Chiuchiolo, A., Gentini, L., Peray, N., Perez, J. C., De Rijk, G., Rijllart, A., Rossi, L., Murtomaeki, J., Mazet, J., Pincot, F. O., Volpini, G., Durante, M., Fazilleau, P., Lorin, C., Stenvall, A., Goldacker, W., Kario, A. & Usoskin, A., 1 Jun 2017, In : IEEE Transactions on Applied Superconductivity. 27, 4, 4003307.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    First-principles atomistic study of surfaces of Fe-rich Fe-Cr

    Ropo, M., Kokko, K., Airiskallio, E., Punkkinen, M. P. J., Hogmark, S., Kollr, J., Johansson, B. & Vitos, L., 6 Jul 2011, In : Journal of Physics: Condensed Matter. 23, 26, 265004.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    First principles prediction of the solar cell efficiency of chalcopyrite materials AgMX 2 (M=In, Al; X=S, Se, Te)

    Dongho-Nguimdo, G. M., Igumbor, E., Zambou, S. & Joubert, D. P., 1 Dec 2019, In : Computational Condensed Matter. 21, e00391.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Flexible Spectrum Management in a Smart City within Licensed Shared Access Framework

    Markova, E., Gudkova, I., Ometov, A., Dzantiev, I., Andreev, S., Koucheryavy, Y. & Samouylov, K., 2017, In : IEEE Access. 5, p. 22252-22261

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Flip-chip Wafer-fused OP-VECSELs emitting 3.65 W at the 1.55-μm waveband

    Mereuta, A., Nechay, K., Caliman, A., Suruceanu, G., Rudra, A., Gallo, P., Guina, M. & Kapon, E., 2019, In : IEEE Journal of Selected Topics in Quantum Electronics. 25, 6

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Flow rate-independent electrical aerosol sensor

    Rostedt, A. & Keskinen, J., 2018, In : Aerosol Science and Technology. 52, 11, p. 1283-1292

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Fluid flow simulations meet high-speed video: Computer vision comparison of droplet dynamics

    Kulju, S., Riegger, L., Koltay, P., Mattila, K. & Hyväluoma, J., 15 Jul 2018, In : Journal of Colloid and Interface Science. 522, p. 48-56 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    Fluorimetric oxygen sensor with an efficient optical read-out for in vitro cell models

    Välimäki, H., Verho, J., Kreutzer, J., Kattipparambil Rajan, D., Ryynänen, T., Pekkanen-Mattila, M., Ahola, A., Tappura, K., Kallio, P. & Lekkala, J., 1 Oct 2017, In : Sensors and Actuators B: Chemical. 249, p. 738-746 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Fluorine losses in Er 3+ oxyfluoride phosphate glasses and glass-ceramics

    Szczodra, A., Mardoukhi, A., Hokka, M., Boetti, N. G. & Petit, L., 15 Aug 2019, In : Journal of Alloys and Compounds. 797, p. 797-803 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Focal Laser Ablation of Prostate Cancer: Numerical Simulation of Temperature and Damage Distribution

    Marqa, M. F., Colin, P., Nevoux, P., Mordon, S. R. & Betrouni, N., 2 Jun 2011, In : BioMedical Engineering Online. 10, 45.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Formation and stability of carbon nanotube network in natural rubber: Effect of non-rubber components

    Le, H. H., Pham, T., Henning, S., Klehm, J., Wießner, S., Stöckelhuber, K. W., Das, A., Hoang, X. T., Do, Q. K., Wu, M., Vennemann, N., Heinrich, G. & Radusch, H. J., 5 Aug 2015, In : Polymer. 73, p. 111-121 11 p., 18004.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Form factors of metallic aluminium from an atom-in-jellium-vacancy model

    Rantala, T. T., 1987, In : Journal of Physics F: Metal Physics. 17, 4, p. 877-884 8 p., 015.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Frequency modulation of semiconductor disk laser pulses

    Zolotovskii, I. O., Korobko, D. A. & Okhotnikov, O. G., 2015, In : Quantum Electronics. 45, 7, p. 628-634 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Fretting-induced friction and wear in large flat-on-flat contact with quenched and tempered steel

    Hintikka, J., Lehtovaara, A. & Mäntylä, A., 2 Jul 2015, In : Tribology International. 92, p. 191-202 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    Further enhancement of mechanical properties of conducting rubber composites based on multiwalled carbon nanotubes and Nitrile Rubber by solvent treatment

    Keinänen, P., Das, A. & Vuorinen, J., 23 Sep 2018, In : Materials. 11, 10, 12 p., 1806.

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    GaInAsSb/AlGa(In)AsSb type I quantum wells emitting in 3 μm range for application in superluminescent diodes

    Kurka, M., Dyksik, M., Suomalainen, S., Koivusalo, E., Guina, M. & Motyka, M., 1 May 2019, In : Optical Materials. 91, p. 274-278 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    Gas-foamed poly(lactide-co-glycolide) and poly(lactide-co-glycolide) with bioactive glass fibres demonstrate insufficient bone repair in lapine osteochondral defects

    Salonius, E., Muhonen, V., Lehto, K., Järvinen, E., Pyhältö, T., Hannula, M., Aula, A. S., Uppstu, P., Haaparanta, A. M., Rosling, A., Kellomäki, M. & Kiviranta, I., 2019, In : Journal of Tissue Engineering and Regenerative Medicine. 13, 3, p. 406-415 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Generalized slip transformations and air-gap harmonics in field models of electrical machines

    Räisänen, V., Suuriniemi, S. & Kettunen, L., 1 Sep 2016, In : IEEE Transactions on Magnetics. 52, 9, 8107708.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    Generation of a broad IR spectrum and N-soliton compression in a longitudinally inhomogeneous dispersion-shifted fibre

    Zolotovskii, I. O., Korobko, D. A., Okhotnikov, O. G., Stolyarov, D. A. & Sysolyatin, A. A., 2015, In : Quantum Electronics. 45, 9, p. 844-852 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    Generation of bound states of pulses in a soliton laser with complex relaxation of a saturable absorber

    Zolotovskii, I. O., Korobko, D. A., Gumenyuk, R. V. & Okhotnikov, O. G., 2015, In : Quantum Electronics. 45, 1, p. 26-34 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    Generation of Sub-100 ps Pulses at 532, 355, and 266 nm Using a SESAM Q-Switched Microchip Laser

    Nikkinen, J., Härkönen, A., Leino, I. & Guina, M., 1 Nov 2017, In : IEEE Photonics Technology Letters. 29, 21, p. 1816-1819 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Geometric Structure and Chemical Ordering of Large AuCu Clusters: A Computational Study

    Goh, J-Q., Akola, J. & Ferrando, R., 25 May 2017, In : Journal of Physical Chemistry C. 121, 20, p. 10809-10816 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    Geometry Analysis in Screen-Printed Stretchable Interconnects

    Mosallaei, M., Jokinen, J., Honkanen, M., Iso-Ketola, P., Vippola, M., Vanhala, J., Kanerva, M. & Mantysalo, M., Aug 2018, In : IEEE Transactions on Components, Packaging and Manufacturing Technology. 8, 8, p. 1344-1352

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    Germanium-on-glass solar cells: Fabrication and characterization

    Sorianello, V., Colace, L., Maragliano, C., Fulgoni, D., Nash, L. & Assanto, G., 2013, In : Optical Materials Express. 3, 2, p. 216-228 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    Ghost imaging in the time domain

    Ryczkowski, P., Barbier, M., Friberg, A. T., Dudley, J. M. & Genty, G., 1 Feb 2016, In : Nature Photonics. 10, p. 167-170 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    Global energy consumption due to friction and wear in the mining industry

    Holmberg, K., Kivikytö-Reponen, P., Härkisaari, P., Valtonen, K. & Erdemir, A., 1 Nov 2017, In : Tribology International. 115, p. 116-139 24 p.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    Grain orientation dependent Nb-Ti microalloying mediated surface segregation on ferritic stainless steel

    Ali-Löytty, H., Hannula, M., Honkanen, M., Östman, K., Lahtonen, K. & Valden, M., Nov 2016, In : Corrosion Science. 112, p. 204-213

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Graphene-based tunable plasmon induced transparency in gold strips

    Habib, M., Rashed, A. R., Ozbay, E. & Caglayan, H., 1 Apr 2018, In : Optical Materials Express. 8, 4, p. 1069-1074 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Growth behavior and magnetic properties of spherical uranium oxide nanoclusters

    Ma, L. & Ray, A. K., Feb 2013, In : Journal of Computational and Theoretical Nanoscience. 10, 2, p. 334-340 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  43. Published

    Growth of immobilized DNA by polymerase: Bridging nanoelectrodes with individual dsDNA molecules

    Linko, V., Leppiniemi, J., Shen, B., Niskanen, E., Hytönen, V. P. & Toppari, J. J., Sep 2011, In : Nanoscale. 3, 9, p. 3788-3792 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    Guanidinium cations pair with positively charged arginine side chains in water

    Kubíčková, A., Křížek, T., Coufal, P., Wernersson, E., Heyda, J. & Jungwirth, P., 16 Jun 2011, In : Journal of Physical Chemistry Letters. 2, 12, p. 1387-1389 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Published

    Guanidinium Pairing Facilitates Membrane Translocation

    Allolio, C., Baxova, K., Vazdar, M. & Jungwirth, P., 14 Jan 2016, In : Journal of Physical Chemistry Part B. 120, 1, p. 143-153 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Hafnium oxide thin films as a barrier against copper diffusion in solar absorbers

    Kotilainen, M., Krumpolec, R., Franta, D., Souček, P., Homola, T., Cameron, D. C. & Vuoristo, P., 1 Jul 2017, In : Solar Energy Materials and Solar Cells. 166, p. 140-146 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Halogen bonding stabilizes a cis-azobenzene derivative in the solid state: A crystallographic study

    Saccone, M., Siiskonen, A., Fernandez-Palacio, F., Priimägi, A., Terraneo, G., Resnati, G. & Metrangolo, P., 1 Apr 2017, In : ACTA CRYSTALLOGRAPHICA SECTION B : STRUCTURAL SCIENCE, CRYSTAL ENGINEERING AND MATERIALS. 73, 2, p. 227-233 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    Halogen bonding versus hydrogen bonding in driving self-assembly and performance of light-responsive supramolecular polymers

    Priimagi, A., Cavallo, G., Forni, A., Gorynsztejn-Leben, M., Kaivola, M., Metrangolo, P., Milani, R., Shishido, A., Pilati, T., Resnati, G. & Terraneo, G., 20 Jun 2012, In : Advanced Functional Materials. 22, 12, p. 2572-2579 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Hexaferrite/polyethylene Composite coatings prepared with flame spraying

    Lisjak, D., Lintunen, P., Hujanen, A., Varis, T., Bolelli, G., Lusvarghi, L., Jagodič, M. & Drofenik, M., 15 Feb 2011, In : Materials Letters. 65, 3, p. 534-536 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    Hierarchical Self-Assembly of Halogen-Bonded Block Copolymer Complexes into Upright Cylindrical Domains

    Milani, R., Houbenov, N., Fernandez-Palacio, F., Cavallo, G., Luzio, A., Haataja, J., Giancane, G., Saccone, M., Priimägi, A., Metrangolo, P. & Ikkala, O., 9 Mar 2017, In : CheM. 2, 3, p. 417-426 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  51. Published

    High actuation performance offered by simple diene rubbers

    Poikelispää, M., Shakun, A., Das, A. & Vuorinen, J., Jan 2017, In : Polymers for Advanced Technologies. 28, 1, p. 130-136 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  52. Published

    High efficiency dilute nitride solar cells: Simulations meet experiments

    Tukiainen, A., Aho, A., Polojärvi, V., Ahorinta, R. & Guina, M., 2016, In : Journal of Green Engineering. 5, 3-4, p. 113-132 20 p., 8.

    Research output: Contribution to journalArticleScientificpeer-review

  53. Published

    Highly conducting polychloroprene composites based on multi-walled carbon nanotubes and 1-butyl 3-methyl imidazolium bis(trifluoromethylsulphonyl)imide

    Subramaniam, K., Das, A. & Heinrich, G., Jul 2012, In : KGK: KAUTSCHUK GUMMI KUNSTSTOFFE. 65, 7-8, p. 44-46 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  54. Published

    Highly efficient charge separation in model Z-scheme TiO2/TiSi2/Si photoanode by micropatterned titanium silicide interlayer

    Hannula, M., Ali-Löytty, H., Lahtonen, K., Saari, J., Tukiainen, A. & Valden, M., 1 Aug 2019, In : Acta Materialia. 174, p. 237-245 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  55. Published

    Highly exfoliated natural rubber/Clay composites by "propping-open procedure": The influence of fatty-acid chain length on exfoliation

    Rooj, S., Das, A., Stöckelhuber, K. W., Reuter, U. & Heinrich, G., Apr 2012, In : Macromolecular Materials and Engineering. 297, 4, p. 369-383 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  56. Published

    High performance corrosion resistant coatings by novel coaxial cold- and hot-wire laser cladding methods

    Pajukoski, H., Näkki, J., Thieme, S., Tuominen, J., Nowotny, S. & Vuoristo, P., 2016, In : Journal of Laser Applications. 28, 1, 012011.

    Research output: Contribution to journalArticleScientificpeer-review

  57. Published

    High-performance elastomeric strain sensors based on nanostructured carbon fillers for potential tire applications

    Bhagavatheswaran, E. S., Vaikuntam, S. R., Stöckelhuber, K. W., Wießner, S., Heinrich, G. & Das, A., 1 Mar 2018, In : Materials Today Communications. 14, p. 240-248 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  58. Published

    High performance natural rubber composites with a hierarchical reinforcement structure of carbon nanotube modified natural fibers

    Tzounis, L., Debnath, S., Rooj, S., Fischer, D., Mäder, E., Das, A., Stamm, M. & Heinrich, G., 2014, In : Materials and Design. 58, p. 1-11 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  59. Published

    High-resolution coded-aperture design for compressive X-ray tomography using low resolution detectors

    Mojica, E., Pertuz, S. & Arguello, H., 2017, In : Optics Communications. 404, p. 103-109

    Research output: Contribution to journalArticleScientificpeer-review

  60. E-pub ahead of print

    High-speed production of antibacterial fabrics using liquid flame spray

    Brobbey, K. J., Haapanen, J., Tuominen, M., Mäkelä, J., Gunell, M., Eerola, E., Saarinen, J. J. & Toivakka, M., 2019, In : Textile Research Journal.

    Research output: Contribution to journalArticleScientificpeer-review

  61. Published

    High speed slurry-pot erosion wear testing with large abrasive particles

    Ojala, N., Valtonen, K., Kivikytö-Reponen, P., Vuorinen, P. & Kuokkala, V-T., Mar 2015, In : Tribologia - Finnish Journal of Tribology. 33, 1, p. 36-44 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  62. Published

    High surface quality welding of aluminum using adjustable ring-mode fiber laser

    Maina, M. R., Okamoto, Y., Okada, A., Närhi, M., Kangastupa, J. & Vihinen, J., 1 Aug 2018, In : Journal of Materials Processing Technology. 258, p. 180-188 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  63. Published

    High temperature corrosion of thermally sprayed NiCr and FeCr coatings covered with a KCl-K2SO4 salt mixture

    Varis, T., Bankiewicz, D., Yrjas, P., Oksa, M., Suhonen, T., Tuurna, S., Ruusuvuori, K. & Holmström, S., 15 Mar 2015, In : Surface and Coatings Technology. 265, p. 235-243 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  64. Published

    High temperature erosion wear of cermet particles reinforced self-fluxing alloy HVOF sprayed coatings

    Surzhenkov, A., Goljandin, D., Traksmaa, R., Viljus, M., Talviste, K., Aruniit, A., Latokartano, J. & Kulu, P., 27 Jul 2015, In : Materials Science: Medziagotyra. 21, 3, p. 386-390 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  65. Published

    Hollow fibers of poly(lactide-co-glycolide) and poly(ε-caprolactone) blends for vascular tissue engineering applications

    Diban, N., Haimi, S., Bolhuis-Versteeg, L., Teixeira, S., Miettinen, S., Poot, A., Grijpma, D. & Stamatialis, D., 2013, In : Acta Biomaterialia. 9, 5, p. 6450-6458 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  66. Published

    Honeycomb porous films as permeable scaffold materials for human embryonic stem cell-derived retinal pigment epithelium

    Calejo, M. T., Ilmarinen, T., Jongprasitkul, H., Skottman, H. & Kellomäki, M., 1 Jul 2016, In : Journal of Biomedical Materials Research. Part A. 104, 7, p. 1646-1656 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  67. Published

    Hot spot temperature in an HTS Coil: Simulations with MIITs and finite element method

    Härö, E., Stenvall, A., Van Nugteren, J. & Kirby, G., 1 Apr 2015, In : IEEE Transactions on Applied Superconductivity. 25, 2

    Research output: Contribution to journalArticleScientificpeer-review

  68. Published

    How conformational flexibility stabilizes the hyperthermophilic elongation factor G-domain

    Kalimeri, M., Rahaman, O., Melchionna, S. & Sterpone, F., 7 Nov 2013, In : Journal of Physical Chemistry Part B. 117, 44, p. 13775-13785 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  69. Published

    How do Water Solvent and Glutathione Ligands Affect the Structure and Electronic Properties of Au25(SR)18-?

    Rojas-Cervellera, V., Rovira, C. & Akola, J., 1 Oct 2015, In : Journal of Physical Chemistry Letters. 6, 19, p. 3859-3865 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  70. Published

    How endoglucanase enzymes act on cellulose nanofibrils: role of amorphous regions revealed by atomistic simulations

    Orłowski, A., Róg, T., Paavilainen, S., Manna, M., Heiskanen, I., Backfolk, K., Timonen, J. & Vattulainen, I., 2015, In : Cellulose. 22, 5, p. 2911-2925 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  71. Published

    Human Adipose Stem Cells Differentiated on Braided Polylactide Scaffolds is a Potential Approach for Tendon Tissue Engineering

    Vuornos, K., Björninen, M., Talvitie, E., Paakinaho, K., Kellomäki, M., Huhtala, H., Miettinen, S., Seppänen-Kaijansinkko, R. & Haimi, S., 1 Mar 2016, In : Tissue Engineering Part A. 22, 5-6, p. 513-523 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  72. Published

    Human adipose stem cells in chondrogenic differentiation medium without growth factors differentiate towards annulus fibrosus phenotype in vitro

    Gebraad, A. W. H., Miettinen, S., Grijpma, D. W. & Haimi, S. P., Dec 2013, In : Macromolecular symposia. 334, 1, p. 49-56 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  73. Published

    Human adipose tissue extract induces angiogenesis and adipogenesis in vitro

    Sarkanen, J. R., Kaila, V., Mannerström, B., Räty, S., Kuokkanen, H., Miettinen, S. & Ylikomi, T., 1 Jan 2012, In : Tissue Engineering Part A. 18, 1-2, p. 17-25 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  74. E-pub ahead of print

    Human Neural Tissues from Neural Stem Cells Using Conductive Biogel and Printed Polymer Microelectrode Arrays for 3D Electrical Stimulation

    Tomaskovic-Crook, E., Zhang, P., Ahtiainen, A., Kaisvuo, H., Lee, C. Y., Beirne, S., Aqrawe, Z., Svirskis, D., Hyttinen, J., Wallace, G. G., Travas-Sejdic, J. & Crook, J. M., 2019, In : ADVANCED HEALTHCARE MATERIALS. 1900425.

    Research output: Contribution to journalArticleScientificpeer-review

  75. Published

    HVOF- and HVAF-Sprayed Cr3C2-NiCr Coatings Deposited from Feedstock Powders of Spherical Morphology: Microstructure Formation and High-Stress Abrasive Wear Resistance Up to 800 °C

    Janka, L., Norpoth, J., Trache, R., Thiele, S. & Berger, L. M., 2017, In : Journal of Thermal Spray Technology. 26, 7, p. 1720–1731 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  76. Published

    Hybrid nanoparticle design based on cationized gelatin and the polyanions dextran sulfate and chondroitin sulfate for ocular gene therapy

    Zorzi, G. K., Párraga, J. E., Seijo, B. & Sánchez, A., 7 Jul 2011, In : MACROMOLECULAR BIOSCIENCE. 11, 7, p. 905-913 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  77. Published

    Hydration of hydroxyl and amino groups examined by molecular dynamics and neutron scattering

    Hladílková, J., Fischer, H. E., Jungwirth, P. & Mason, P. E., 28 May 2015, In : Journal of Physical Chemistry Part B. 119, 21, p. 6357-6365 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  78. Published

    Hydrazone crosslinked hyaluronan-based hydrogels for therapeutic delivery of adipose stem cells to treat corneal defects

    Koivusalo, L., Karvinen, J., Sorsa, E., Jönkkäri, I., Väliaho, J., Kallio, P., Ilmarinen, T., Miettinen, S., Skottman, H. & Kellomäki, M., Apr 2018, In : Materials Science and Engineering C. 85, p. 68-78 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  79. Published

    Hydrolysis and drug release from poly(ethylene glycol)-modified lactone polymers with open porosity

    Asikainen, S., Paakinaho, K., Kyhkynen, A. K., Hannula, M., Malin, M., Ahola, N., Kellomäki, M. & Seppälä, J., 1 Apr 2019, In : European Polymer Journal. 113, p. 165-175 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  80. Published

    ICED - Inductively Coupled Energy Dissipater for Future High Field Accelerator Magnets

    Murtomäki, J. S., van Nugteren, J., Kirby, G., DeRijk, G., Rossi, L. & Stenvall, A., Dec 2018, In : IEEE Transactions on Applied Superconductivity. 28, 8, 4009015.

    Research output: Contribution to journalArticleScientificpeer-review

  81. Published

    Identification of single microbial particles using electro-dynamic balance assisted laser-induced breakdown and fluorescence spectroscopy

    Saari, S., Järvinen, S., Reponen, T., Mensah-Attipoe, J., Pasanen, P., Toivonen, J. & Keskinen, J., 1 Feb 2016, In : Aerosol Science and Technology. 50, 2, p. 126-132 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  82. Published

    Identification of synchronous machine magnetization characteristics from calorimetric core-loss and no-load curve measurements

    Rasilo, P., Abdallh, A. A. E., Belahcen, A., Arkkio, A. & Dupré, L., 1 Mar 2015, In : IEEE Transactions on Magnetics. 51, 3, 2001304.

    Research output: Contribution to journalArticleScientificpeer-review

  83. Published

    Immobilized bioactive agents onto polyurethane surface with heparin and phosphorylcholine group

    Tan, M., Feng, Y., Wang, H., Zhang, L., Khan, M., Guo, J., Chen, Q. & Liu, J., May 2013, In : Macromolecular Research. 21, 5, p. 541-549 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  84. Published

    Impact wear and mechanical behavior of steels at subzero temperatures

    Valtonen, K., Ratia, V., Ramakrishnan, K. R., Apostol, M., Terva, J. & Kuokkala, V-T., 2019, In : Tribology International. 129, p. 476-493 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  85. Published

    Implementation of a direct procedure for critical point computations using preconditioned iterative solvers

    Kouhia, R., Tůma, M., Mäkinen, J., Fedoroff, A. & Marjamäki, H., Oct 2012, In : Computers & Structures. 108-109, p. 110-117 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  86. Published

    Importance of iron-loss modeling in simulation of wound-field synchronous machines

    Rasilo, P., Belahcen, A. & Arkkio, A., 2012, In : IEEE Transactions on Magnetics. 48, 9, p. 2495-2504 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  87. Published

    Improved corrosion properties of Hot Dip Galvanized Steel by nanomolecular silane layers as hybrid interface between zinc and top coatings

    Vuori, L., Ali-Löytty, H., Lahtonen, K., Hannula, M., Lehtonen, E., Niu, Y. & Valden, M., 2017, In : Corrosion. 73, 2

    Research output: Contribution to journalArticleScientificpeer-review

  88. Published

    Improved dimensional stability with bioactive glass fibre skeleton in poly(lactide-co-glycolide) porous scaffolds for tissue engineering

    Haaparanta, A-M., Uppstu, P., Hannula, M., Ellä, V., Rosling, A. & Kellomäki, M., 20 Jul 2015, In : Materials Science and Engineering C: Materials for Biological Applications. 56, p. 457-466 10 p., 5584.

    Research output: Contribution to journalArticleScientificpeer-review

  89. Published

    Improved electromechanical response in acrylic rubber by different carbon-based fillers

    Shakun, A., Poikelispää, M., Das, A. & Vuorinen, J., 2018, In : Polymer Engineering and Science. 58, 3, p. 395-404

    Research output: Contribution to journalArticleScientificpeer-review

  90. Published

    Improved oxidation resistance of conducting polychloroprene composites

    Subramaniam, K., Das, A. & Heinrich, G., 24 Jan 2013, In : Composites Science and Technology. 74, p. 14-19 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  91. Improved size-tunable synthesis of monodisperse gold nanorods through the use of aromatic additives

    Ye, X., Jin, L., Caglayan, H., Chen, J., Xing, G., Zheng, C., Doan-Nguyen, V., Kang, Y., Engheta, N., Kagan, C. R. & Murray, C. B., 27 Mar 2012, In : ACS Nano. 6, 3, p. 2804-2817 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  92. Published

    Improved Stability of Atomic Layer Deposited Amorphous TiO2 Photoelectrode Coatings by Thermally Induced Oxygen Defects

    Hannula, M., Ali-Löytty, H., Lahtonen, K., Sarlin, E., Saari, J. & Valden, M., 27 Feb 2018, In : Chemistry of Materials. 30, 4, p. 1199-1208 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  93. Published

    Improvement of actuation performance of dielectric elastomers by barium titanate and carbon black fillers

    Poikelispää, M., Shakun, A., Das, A. & Vuorinen, J., 10 Nov 2016, In : Journal of Applied Polymer Science. 133, 42, 44116.

    Research output: Contribution to journalArticleScientificpeer-review

  94. Published

    Improving the high temperature abrasion resistance of thermally sprayed Cr3C2-NiCr coatings by WC addition

    Janka, L., Berger, L. M., Norpoth, J., Trache, R., Thiele, S., Tomastik, C., Matikainen, V. & Vuoristo, P., 15 Mar 2018, In : Surface and Coatings Technology. 337, p. 296-305 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  95. Published

    Improving the signal-to-noise ratio of Faraday cup aerosol electrometer based aerosol instrument calibrations

    Pihlava, K., Keskinen, J. & Yli-Ojanperä, J., 2 Apr 2016, In : Aerosol Science and Technology. 50, 4, p. 373-379 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  96. Published

    Improving the toughness of thermally sprayed Cr 3C 2-NiCr hardmetal coatings by laser post-treatment

    Janka, L., Norpoth, J., Eicher, S., Rodríguez Ripoll, M. & Vuoristo, P., 15 May 2016, In : Materials and Design. 98, p. 135-142 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  97. Published

    Increased Binding of Calcium Ions at Positively Curved Phospholipid Membranes

    Magarkar, A., Jurkiewicz, P., Allolio, C., Hof, M. & Jungwirth, P., 19 Jan 2017, In : Journal of Physical Chemistry Letters. 8, 2, p. 518-523 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  98. Published

    Increased propensity of Iaq - for the water surface in non-neutral solutions: Implications for the interfacial behavior of H 3Oaq + and OHaq -

    Ottosson, N., Cwiklik, L., Söderström, J., Björneholm, O., Öhrwall, G. & Jungwirth, P., 5 May 2011, In : Journal of Physical Chemistry Letters. 2, 9, p. 972-976 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  99. Published

    Increased survival rate by local release of diclofenac in a murine model of recurrent oral carcinoma

    Will, O. M., Purcz, N., Chalaris, A., Heneweer, C., Boretius, S., Purcz, L., Nikkola, L., Ashammakhi, N., Kalthoff, H., Glüer, C. C., Wiltfang, J., Açil, Y. & Tiwari, S., 12 Oct 2016, In : International Journal of Nanomedicine. 11, p. 5311-5321 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  100. Published

    Influence of As/group-III flux ratio on defects formation and photovoltaic performance of GaInNAs solar cells

    Polojärvi, V., Aho, A., Tukiainen, A., Raappana, M., Aho, T., Schramm, A. & Guina, M., 1 May 2016, In : Solar Energy Materials and Solar Cells. 149, p. 213-220 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  101. Published

    Influence of environmental conditions on EMF levels in a span of overhead transmission lines

    Okun, O., Kravchenko, Y. & Korpinen, L., 2016, In : Progress in Electromagnetics Research C. 63, p. 163-171 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...11 Next
Download list To download, please limit the number of search results to 1,000 or less.