TUTCRIS - Tampereen teknillinen yliopisto

TUTCRIS

A novel strain sensor based on 3D printing technology and 3D antenna design

Tutkimustuotosvertaisarvioitu

Standard

A novel strain sensor based on 3D printing technology and 3D antenna design. / Le, Taoran; Song, Bo; Liu, Qi; Bahr, Ryan A.; Moscato, Stefano; Wong, Ching Ping; Tentzeris, Manos M.

2015 IEEE 65th Electronic Components and Technology Conference, ECTC 2015. Vuosikerta 2015-July Institute of Electrical and Electronics Engineers Inc., 2015. s. 981-986 7159714.

Tutkimustuotosvertaisarvioitu

Harvard

Le, T, Song, B, Liu, Q, Bahr, RA, Moscato, S, Wong, CP & Tentzeris, MM 2015, A novel strain sensor based on 3D printing technology and 3D antenna design. julkaisussa 2015 IEEE 65th Electronic Components and Technology Conference, ECTC 2015. Vuosikerta. 2015-July, 7159714, Institute of Electrical and Electronics Engineers Inc., Sivut 981-986, San Diego, Yhdysvallat, 26/05/15. https://doi.org/10.1109/ECTC.2015.7159714

APA

Le, T., Song, B., Liu, Q., Bahr, R. A., Moscato, S., Wong, C. P., & Tentzeris, M. M. (2015). A novel strain sensor based on 3D printing technology and 3D antenna design. teoksessa 2015 IEEE 65th Electronic Components and Technology Conference, ECTC 2015 (Vuosikerta 2015-July, Sivut 981-986). [7159714] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ECTC.2015.7159714

Vancouver

Le T, Song B, Liu Q, Bahr RA, Moscato S, Wong CP et al. A novel strain sensor based on 3D printing technology and 3D antenna design. julkaisussa 2015 IEEE 65th Electronic Components and Technology Conference, ECTC 2015. Vuosikerta 2015-July. Institute of Electrical and Electronics Engineers Inc. 2015. s. 981-986. 7159714 https://doi.org/10.1109/ECTC.2015.7159714

Author

Le, Taoran ; Song, Bo ; Liu, Qi ; Bahr, Ryan A. ; Moscato, Stefano ; Wong, Ching Ping ; Tentzeris, Manos M. / A novel strain sensor based on 3D printing technology and 3D antenna design. 2015 IEEE 65th Electronic Components and Technology Conference, ECTC 2015. Vuosikerta 2015-July Institute of Electrical and Electronics Engineers Inc., 2015. Sivut 981-986

Bibtex - Lataa

@inproceedings{0c067600714b45e09d152c86ecee563d,
title = "A novel strain sensor based on 3D printing technology and 3D antenna design",
abstract = "The additive manufacturing technique of 3D printing has become increasingly popular for time-consuming and complex designs. Due to the special mechanical properties of commercial NinjaFlex filament [1] and in-house-made electrically conductive adhesives (ECAs) [2], there is great potential for the 3D printed RF applications, such as strain sensors and flexible, wearable RF devices. This paper presents the flexible 3D printed strain sensor, as a 3D dipole antenna of ECA stretchable conductor on 3D printed Ninjaflex filament.",
keywords = "3D antenna, 3D printing, flexible electronics, materiel characterization, NinjaFlex, RF, stretchable",
author = "Taoran Le and Bo Song and Qi Liu and Bahr, {Ryan A.} and Stefano Moscato and Wong, {Ching Ping} and Tentzeris, {Manos M.}",
year = "2015",
month = "7",
day = "15",
doi = "10.1109/ECTC.2015.7159714",
language = "English",
volume = "2015-July",
pages = "981--986",
booktitle = "2015 IEEE 65th Electronic Components and Technology Conference, ECTC 2015",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
address = "United States",

}

RIS (suitable for import to EndNote) - Lataa

TY - GEN

T1 - A novel strain sensor based on 3D printing technology and 3D antenna design

AU - Le, Taoran

AU - Song, Bo

AU - Liu, Qi

AU - Bahr, Ryan A.

AU - Moscato, Stefano

AU - Wong, Ching Ping

AU - Tentzeris, Manos M.

PY - 2015/7/15

Y1 - 2015/7/15

N2 - The additive manufacturing technique of 3D printing has become increasingly popular for time-consuming and complex designs. Due to the special mechanical properties of commercial NinjaFlex filament [1] and in-house-made electrically conductive adhesives (ECAs) [2], there is great potential for the 3D printed RF applications, such as strain sensors and flexible, wearable RF devices. This paper presents the flexible 3D printed strain sensor, as a 3D dipole antenna of ECA stretchable conductor on 3D printed Ninjaflex filament.

AB - The additive manufacturing technique of 3D printing has become increasingly popular for time-consuming and complex designs. Due to the special mechanical properties of commercial NinjaFlex filament [1] and in-house-made electrically conductive adhesives (ECAs) [2], there is great potential for the 3D printed RF applications, such as strain sensors and flexible, wearable RF devices. This paper presents the flexible 3D printed strain sensor, as a 3D dipole antenna of ECA stretchable conductor on 3D printed Ninjaflex filament.

KW - 3D antenna

KW - 3D printing

KW - flexible electronics

KW - materiel characterization

KW - NinjaFlex

KW - RF

KW - stretchable

UR - http://www.scopus.com/inward/record.url?scp=84942099400&partnerID=8YFLogxK

U2 - 10.1109/ECTC.2015.7159714

DO - 10.1109/ECTC.2015.7159714

M3 - Conference contribution

VL - 2015-July

SP - 981

EP - 986

BT - 2015 IEEE 65th Electronic Components and Technology Conference, ECTC 2015

PB - Institute of Electrical and Electronics Engineers Inc.

ER -