TUTCRIS - Tampereen teknillinen yliopisto

TUTCRIS

Avoiding the high friction peak in fretting contact

Tutkimustuotosvertaisarvioitu

Yksityiskohdat

AlkuperäiskieliEnglanti
Sivut12-19
Sivumäärä8
JulkaisuRakenteiden Mekaniikka
Vuosikerta53
Numero1
DOI - pysyväislinkit
TilaJulkaistu - 2020
OKM-julkaisutyyppiA1 Alkuperäisartikkeli

Tiivistelmä

Fretting fatigue and wear may exist if two parts have small amplitude relative rubbing between the contacting surfaces. A peak in the coefficient of friction typically occurs during the first thousands of loading cycles in dry fretting contact with quenched and tempered steel. This peak is related to adhesive friction and wear causing non-Coulomb friction and high local contact stresses possibly leading to cracking. The focus of the study is the effect of different experimental methods on the frictional behavior of the fretting contact between the steel surfaces. The use of pre-corroded specimens and contact lubrication delayed and reduced the initial peak. However, a pre-added third body layer removed the peak completely.

Tutkimusalat

Julkaisufoorumi-taso

Tilastokeskuksen tieteenalat