Detection of gear pitting failure progression with on-line particle monitoring
Tutkimustuotos: Konferenssiesitys, posteri tai abstrakti ›
|Tila||Julkaistu - 16 kesäkuuta 2016|
|Tapahtuma||NORDIC SYMPOSIUM ON TRIBOLOGYNORDTRIB: NORDTRIB - |
Kesto: 1 tammikuuta 1900 → …
|Conference||NORDIC SYMPOSIUM ON TRIBOLOGYNORDTRIB|
|Ajanjakso||1/01/00 → …|
In this study, the progression of gear macropitting failure was detected with on-line particle monitoring from lubricating oil and it is correlated to the corresponding results obtained with vibration monitoring from the test gearbox and with visual inspection documented by photographs. The tests were carried out with modified FZG gear test rig with real gears and operating conditions. The on-line particle monitoring system was implemented to the test rig having pressurized circulating lubrication. Particle sensor of the analyser is based on inductive measurement principle and it detects ferromagnetic metallic particles larger than 70 µm and non-ferromagnetic metallic particles larger than 200 µm. The results show that the concentration of metallic particles in oil corresponds well with the severity of macropitting failure obtained from the visual inspection. It is also shown that vibration acceleration descriptors indicating peaked signal correlate with the wear of gear contact, but the correlation is not as strong as in wear particle monitoring.