Enhanced-performance wireless conformal "smart skins" utilizing inkjet-printed carbon-nanostructures

Tutkimustuotos › › vertaisarvioitu

Standard

Enhanced-performance wireless conformal "smart skins" utilizing inkjet-printed carbon-nanostructures. / Le, Taoran; Lin, Ziyin; Wong, C. P.; Tentzeris, M. M.

Proceedings - Electronic Components and Technology Conference. Institute of Electrical and Electronics Engineers Inc., 2014. s. 769-774 6897372.

Tutkimustuotos › › vertaisarvioitu

Harvard

Le, T, Lin, Z, Wong, CP & Tentzeris, MM 2014, Enhanced-performance wireless conformal "smart skins" utilizing inkjet-printed carbon-nanostructures. julkaisussa Proceedings - Electronic Components and Technology Conference., 6897372, Institute of Electrical and Electronics Engineers Inc., Sivut 769-774, Orlando, Yhdysvallat, 27/05/14. https://doi.org/10.1109/ECTC.2014.6897372

APA

Le, T., Lin, Z., Wong, C. P., & Tentzeris, M. M. (2014). Enhanced-performance wireless conformal "smart skins" utilizing inkjet-printed carbon-nanostructures. teoksessa Proceedings - Electronic Components and Technology Conference (Sivut 769-774). [6897372] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ECTC.2014.6897372

Vancouver

Le T, Lin Z, Wong CP, Tentzeris MM. Enhanced-performance wireless conformal "smart skins" utilizing inkjet-printed carbon-nanostructures. julkaisussa Proceedings - Electronic Components and Technology Conference. Institute of Electrical and Electronics Engineers Inc. 2014. s. 769-774. 6897372 https://doi.org/10.1109/ECTC.2014.6897372

Author

Le, Taoran ; Lin, Ziyin ; Wong, C. P. ; Tentzeris, M. M. / Enhanced-performance wireless conformal "smart skins" utilizing inkjet-printed carbon-nanostructures. Proceedings - Electronic Components and Technology Conference. Institute of Electrical and Electronics Engineers Inc., 2014. Sivut 769-774

Bibtex - Lataa

@inproceedings{10b9fdad9e8d4f18b37b64936d44387f,

title = "Enhanced-performance wireless conformal {"}smart skins{"} utilizing inkjet-printed carbon-nanostructures",

abstract = "This paper introduces for the first time the integration of a UHF radio frequency identification (RFID) antenna with reduced graphene oxide (rGO), developed using direct-write techniques and utilizing an RFID chip for chemical gas detection. The module is realized by inkjet printing on a low-cost paper-based substrate, and the RFID tag is designed for the North America UHF RFID band. The electrical impedance of the rGO thin film changes in the presence of very small quantities of certain toxic gases, resulting in a variation of the backscattered power level which is easily detected by the RFID reader to realize reliable wireless toxic gas sensing. The inkjet printed RFID tag demonstrated a change in backscattered power of 9.18{\%} upon exposure of 40 ppm NO2 for 5 minutes.",

keywords = "Gas sensor, graphene, inkjet printing, T-match, UHF RFID, wireless",

author = "Taoran Le and Ziyin Lin and Wong, {C. P.} and Tentzeris, {M. M.}",

year = "2014",

month = "9",

day = "11",

doi = "10.1109/ECTC.2014.6897372",

language = "English",

pages = "769--774",

booktitle = "Proceedings - Electronic Components and Technology Conference",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

address = "United States",

}

RIS (suitable for import to EndNote) - Lataa

TY - GEN

T1 - Enhanced-performance wireless conformal "smart skins" utilizing inkjet-printed carbon-nanostructures

AU - Le, Taoran

AU - Lin, Ziyin

AU - Wong, C. P.

AU - Tentzeris, M. M.

PY - 2014/9/11

Y1 - 2014/9/11

N2 - This paper introduces for the first time the integration of a UHF radio frequency identification (RFID) antenna with reduced graphene oxide (rGO), developed using direct-write techniques and utilizing an RFID chip for chemical gas detection. The module is realized by inkjet printing on a low-cost paper-based substrate, and the RFID tag is designed for the North America UHF RFID band. The electrical impedance of the rGO thin film changes in the presence of very small quantities of certain toxic gases, resulting in a variation of the backscattered power level which is easily detected by the RFID reader to realize reliable wireless toxic gas sensing. The inkjet printed RFID tag demonstrated a change in backscattered power of 9.18% upon exposure of 40 ppm NO2 for 5 minutes.

AB - This paper introduces for the first time the integration of a UHF radio frequency identification (RFID) antenna with reduced graphene oxide (rGO), developed using direct-write techniques and utilizing an RFID chip for chemical gas detection. The module is realized by inkjet printing on a low-cost paper-based substrate, and the RFID tag is designed for the North America UHF RFID band. The electrical impedance of the rGO thin film changes in the presence of very small quantities of certain toxic gases, resulting in a variation of the backscattered power level which is easily detected by the RFID reader to realize reliable wireless toxic gas sensing. The inkjet printed RFID tag demonstrated a change in backscattered power of 9.18% upon exposure of 40 ppm NO2 for 5 minutes.

KW - Gas sensor

KW - graphene

KW - inkjet printing

KW - T-match

KW - UHF RFID

KW - wireless

UR - http://www.scopus.com/inward/record.url?scp=84907903342&partnerID=8YFLogxK

U2 - 10.1109/ECTC.2014.6897372

DO - 10.1109/ECTC.2014.6897372

M3 - Conference contribution

SP - 769

EP - 774

BT - Proceedings - Electronic Components and Technology Conference

PB - Institute of Electrical and Electronics Engineers Inc.

ER -

TUTCRIS