TUTCRIS - Tampereen teknillinen yliopisto


Modified Wilkinson power divider with harmonics suppression and compact size for GSM applications



JulkaisuInternational Journal of RF and Microwave Computer-Aided Engineering
DOI - pysyväislinkit
TilaJulkaistu - 2020
OKM-julkaisutyyppiA1 Alkuperäisartikkeli


In this article, a modified microstrip Wilkinson power divider with harmonics suppression for GSM communications applications is presented. For low-pass filter designing, one open stub, one radial resonator, and two rectangular resonators are used. According to results related to insertion losses (|S21| and |S31|), stopband is wide and equal to 7.5 GHz (3.4-10.9 GHz), under the condition of 20 dB harmonic suppression level. The results show that at the designed frequency of 1.8 GHz, the input return loss (|S11|) and output return losses (|S22| and |S33|) are better than 22 dB, and the isolation between of output ports (|S32|) is better than 30 dB. The size of the proposed power divider is compact and equal to 10.6 × 14.6 mm2. Finally, the proposed power divider was fabricated and the measurement results illustrate a good agreement with simulation results.