TUTCRIS - Tampereen teknillinen yliopisto

TUTCRIS

Reinforcement and migration of nanoclay in polychloroprene/ethylene-propylene-diene-monomer rubber blends

Tutkimustuotosvertaisarvioitu

Yksityiskohdat

AlkuperäiskieliEnglanti
Sivut276-281
Sivumäärä6
JulkaisuComposites Science and Technology
Vuosikerta71
Numero3
DOI - pysyväislinkit
TilaJulkaistu - 7 helmikuuta 2011
OKM-julkaisutyyppiA1 Alkuperäisartikkeli

Tiivistelmä

This communication demonstrates, an approach of compatibilization between polychloroprene (CR) and ethylene propylene diene monomer rubber (EPDM) by using nanoclay as a compatibilizer and, simultaneously, as a very strong reinforcing nano-filler. With the incorporation of less than 9. wt.% nanoclay, the dynamic storage modulus above the glass transition region of such a blend increases from ~2. MPa to ~54. MPa. This tremendous reinforcing as well as the compatibilization effect of the nanoclay was understood by thermodynamically driven preferential framework-like accumulation of exfoliated nanoclay platelets in the phase border of CR and EPDM, as observed i.e. from transmission electron microscopy. The extra-ordinary improvement of dynamic modulus can also be understood by a very strong filler-filler networking that we observed in strain sweep experiments. Moreover, we found that the compatibilized blends exhibit an extra dynamic-mechanical relaxation process at higher temperatures (~. Tg+. 130. K). The suggested method for compatibilization of incompatible rubber blends offers routes to the design of new rubber based technical products for diversified applications.

!!ASJC Scopus subject areas

Tutkimusalat