TUTCRIS - Tampereen teknillinen yliopisto

TUTCRIS

Residual stress development in cold sprayed Al, Cu and Ti coatings

Tutkimustuotosvertaisarvioitu

Yksityiskohdat

AlkuperäiskieliEnglanti
Sivut6329-6337
Sivumäärä9
JulkaisuActa Materialia
Vuosikerta61
Numero17
DOI - pysyväislinkit
TilaJulkaistu - lokakuuta 2013
OKM-julkaisutyyppiA1 Alkuperäisartikkeli

Tiivistelmä

Residual stresses play an important role in the formation and performance of thermal spray coatings. A curvature-based approach where the substrate-coating system deflection and temperature are monitored throughout the coating deposition process was used to determine residual stress formation during cold spray deposition of Al, Cu and Ti coatings. The effect of substrate material (carbon steel, stainless steel and aluminium) and substrate pre-treatment (normal grit blasting, grit blasting with the cold spray system and grinding for carbon steel substrate) were studied for all coating materials with optimized deposition parameters. Mainly compressive stresses were expected because of the nature of cold spraying, but also neutral as well as tensile stresses were formed for studied coatings. The magnitudes of the residual stresses were mainly dependent on the substrate/coating material combination, but the surface preparation was also found to have an effect on the final stress stage of the coating.