Abou-Chahine F, Fujii D, Imahori H, Nakano H, Tkachenko NV, Matano Y, Lemmetyinen H. 2015. Synthesis and Photophysical Properties of Two Diazaporphyrin-Porphyrin Hetero Dimers in Polar and Nonpolar Solutions. Journal of Physical Chemistry Part B. 119(24):7328-7337. https://doi.org/10.1021/jp510903a

Aho A, Polojärvi V, Korpijärvi VM, Salmi J, Tukiainen A, Laukkanen P, Guina M. 2014. Composition dependent growth dynamics in molecular beam epitaxy of GaInNAs solar cells. Solar Energy Materials and Solar Cells. 124:150-158. https://doi.org/10.1016/j.solmat.2014.01.044

Alekseev A, Ihalainen P, Ivanov A, Domnin I, Klechkovskaya V, Orekhov A, Lemmetyinen H, Vuorimaa-Laukkanen E, Peltonen J, Vyaz'min S. 2016. The red, purple and blue modifications of polymeric unsymmetrical hydroxyalkadiynyl-N-arylcarbamate derivatives in Langmuir-Schaefer films. Thin Solid Films. 612:463-471. https://doi.org/10.1016/j.tsf.2016.06.044

Alekseev A, Ihalainen P, Ivanov A, Domnin I, Rosqvist E, Lemmetyinen H, Vuorimaa-Laukkanen E, Peltonen J, Vyaz'min S. 2018. Stable blue phase polymeric Langmuir-Schaefer films based on unsymmetrical hydroxyalkadiynyl N-arylcarbamate derivatives. Thin Solid Films. 645:108-118. https://doi.org/10.1016/j.tsf.2017.10.018

Ali-Löytty H, Louie MW, Singh MR, Li L, Sanchez Casalongue HG, Ogasawara H, Crumlin EJ, Liu Z, Bell AT, Nilsson A, Friebel D. 2016. Ambient-Pressure XPS Study of a Ni-Fe Electrocatalyst for the Oxygen Evolution Reaction. Journal of Physical Chemistry C. 120(4):2247-2253. https://doi.org/10.1021/acs.jpcc.5b10931

Allolio C, Baxova K, Vazdar M, Jungwirth P. 2016. Guanidinium Pairing Facilitates Membrane Translocation. Journal of Physical Chemistry Part B. 120(1):143-153. https://doi.org/10.1021/acs.jpcb.5b10404

Andersson P, Kilpi L, Holmberg K, Vaajoki A, Oksanen V. 2016. Static friction measurements on steel against uncoated and coated cast iron. Tribologia. 34(1-2):5-40.

Auer S, Koho T, Uusi-Kerttula H, Vesikari T, Blazevic V, Hytönen VP. 2015. Rapid and sensitive detection of norovirus antibodies in human serum with a biolayer interferometry biosensor. Sensors and Actuators B: Chemical. 221:507-514. https://doi.org/10.1016/j.snb.2015.06.088

Baek J, Umeyama T, Stranius K, Yamada H, Tkachenko NV, Imahori H. 2017. Long-Range Observation of Exciplex Formation and Decay Mediated by One-Dimensional Bridges. Journal of Physical Chemistry C. 121(25):13952-13961. https://doi.org/10.1021/acs.jpcc.7b04483

Baek J, Umeyama T, Mizuno S, Tkachenko NV, Imahori H. 2017. Photophysical properties of porphyrin dimer-single-walled carbon nanotube linked systems. Journal of Physical Chemistry C. 121(39). https://doi.org/10.1021/acs.jpcc.7b08594

Banerjee SS, Hait S, Natarajan TS, Wießner S, Stöckelhuber KW, Jehnichen D, Janke A, Fischer D, Heinrich G, Busfield JJC, Das A. 2019. Water-Responsive and Mechanically Adaptive Natural Rubber Composites by in Situ Modification of Mineral Filler Structures. Journal of Physical Chemistry B. 123(24):5168-5175. https://doi.org/10.1021/acs.jpcb.9b02125

Banerjee SS, Natarajan TS, Subramani B. E, Wießner S, Janke A, Heinrich G, Das A. 2019. Temperature scanning stress relaxation behavior of water responsive and mechanically adaptive elastomer nanocomposites. Journal of Applied Polymer Science. https://doi.org/10.1002/app.48344

Baratto C, Golovanova V, Faglia G, Hakola H, Niemi T, Tkachenko N, Nazarchurk B, Golovanov V. 2020. On the alignment of ZnO nanowires by Langmuir – Blodgett technique for sensing application. Applied Surface Science. 528. https://doi.org/10.1016/j.apsusc.2020.146959

Barberi J, Nommeots-Nomm A, Fiume E, Verné E, Massera J, Baino F. 2019. Mechanical characterization of pore-graded bioactive glass scaffolds produced by robocasting. Biomedical Glasses. 5(1):140-147. https://doi.org/10.1515/bglass-2019-0012

Bhagavatheswaran ES, Parsekar M, Das A, Le HH, Wiessner S, Stöckelhuber KW, Schmaucks G, Heinrich G. 2015. Construction of an Interconnected Nanostructured Carbon Black Network: Development of Highly Stretchable and Robust Elastomeric Conductors. Journal of Physical Chemistry C. 119(37):21723-21731. https://doi.org/10.1021/acs.jpcc.5b06629

Björling M, Miettinen J, Marklund P, Lehtovaara A, Larsson R. 2015. The correlation between gear contact friction and ball on disc friction measurements. Tribology International. 83:114-119. https://doi.org/10.1016/j.triboint.2014.11.007

Bolelli G, Berger LM, Börner T, Koivuluoto H, Lusvarghi L, Lyphout C, Markocsan N, Matikainen V, Nylén P, Sassatelli P, Trache R, Vuoristo P. 2015. Tribology of HVOF- and HVAF-sprayed WC-10Co4Cr hardmetal coatings: A comparative assessment. Surface and Coatings Technology. 265:125-144. https://doi.org/10.1016/j.surfcoat.2015.01.048

Bolelli G, Milanti A, Lusvarghi L, Trombi L, Koivuluoto H, Vuoristo P. 2016. Wear and impact behaviour of High Velocity Air-Fuel sprayed Fe-Cr-Ni-B-C alloy coatings. Tribology International. 95:372-390. https://doi.org/10.1016/j.triboint.2015.11.036

Bolelli G, Berger LM, Börner T, Koivuluoto H, Matikainen V, Lusvarghi L, Lyphout C, Markocsan N, Nylén P, Sassatelli P, Trache R, Vuoristo P. 2016. Sliding and abrasive wear behaviour of HVOF- and HVAF-sprayed Cr3C2-NiCr hardmetal coatings. Wear. 358-359:32-50. https://doi.org/10.1016/j.wear.2016.03.034

Bolelli G, Bursi M, Lusvarghi L, Manfredini T, Matikainen V, Rigon R, Sassatelli P, Vuoristo P. 2018. Tribology of FeVCrC coatings deposited by HVOF and HVAF thermal spray processes. Wear. 394-395:113-133. https://doi.org/10.1016/j.wear.2017.10.014

Borah D, Rasappa S, Senthamaraikannan R, Shaw MT, Holmes JD, Morris MA. 2013. The sensitivity of random polymer brush-lamellar polystyrene-b-polymethylmethacrylate block copolymer systems to process conditions. Journal of Colloid and Interface Science. 393(1):192-202. https://doi.org/10.1016/j.jcis.2012.10.070

Borah D, Shaw MT, Rasappa S, Farrell RA, O'Mahony C, Faulkner CM, Bosea M, Gleeson P, Holmes JD, Morris MA. 2011. Plasma etch technologies for the development of ultra-small feature size transistor devices. Journal of Physics D: Applied Physics. 44(17). https://doi.org/10.1088/0022-3727/44/17/174012

Brobbey KJ, Haapanen J, Gunell M, Mäkelä JM, Eerola E, Toivakka M, Saarinen JJ. 2017. One-step flame synthesis of silver nanoparticles for roll-to-roll production of antibacterial paper. Applied Surface Science. 420:558-565. https://doi.org/10.1016/j.apsusc.2017.05.143

Caglayan H, Bulu I, Ozbay E. 2009. Observation of off-axis directional beaming via subwavelength asymmetric metallic gratings. Journal of Physics D: Applied Physics. 42(4). https://doi.org/10.1088/0022-3727/42/4/045105

Cappelluti F, Kim D, van Eerden M, Cédola AP, Aho T, Bissels G, Elsehrawy F, Wu J, Liu H, Mulder P, Bauhuis G, Schermer J, Niemi T, Guina M. 2018. Light-trapping enhanced thin-film III-V quantum dot solar cells fabricated by epitaxial lift-off. Solar Energy Materials and Solar Cells. 181:83-92. https://doi.org/10.1016/j.solmat.2017.12.014

Chintha AR, Valtonen K, Kuokkala VT, Kundu S, Peet MJ, Bhadeshia HKDH. 2019. Role of fracture toughness in impact-abrasion wear. Wear. 428-429:430-437. https://doi.org/10.1016/j.wear.2019.03.028

Christophliemk H, Ullsten H, Johansson C, Järnström L. 2017. Starch-poly(vinyl alcohol) barrier coatings for flexible packaging paper and their effects of phase interactions. Progress in Organic Coatings. 111:13-22. https://doi.org/10.1016/j.porgcoat.2017.04.018

Christophliemk H, Johansson C, Ullsten H, Järnström L. 2017. Oxygen and water vapor transmission rates of starch-poly(vinyl alcohol) barrier coatings for flexible packaging paper. Progress in Organic Coatings. 113:218-224. https://doi.org/10.1016/j.porgcoat.2017.04.019

Colace L, Sorianello V, Romagnoli M, Socci L, Assanto G. 2011. Optical power monitors in Ge monolithically integrated on SOI chips. Microelectronic Engineering. 88(4):514-517. https://doi.org/10.1016/j.mee.2010.10.033

Del Cerro PR, Teittinen H, Norrbo I, Lastusaari M, Massera J, Petit L. 2020. Novel borosilicate bioactive scaffolds with persistent luminescence. Biomedical Glasses. 6(1):1-9. https://doi.org/10.1515/bglass-2020-0001

Durandin NA, Isokuortti J, Efimov A, Vuorimaa-Laukkanen E, Tkachenko NV, Laaksonen T. 2018. Efficient photon upconversion at remarkably low annihilator concentrations in a liquid polymer matrix: when less is more. Chemical Communications. 54(99):14029-14032. https://doi.org/10.1039/c8cc07592a

Dzieciuch M, Rissanen S, Szydłowska N, Bunker A, Kumorek M, Jamróz D, Vattulainen I, Nowakowska M, Róg T, Kepczynski M. 2015. PEGylated liposomes as carriers of hydrophobic porphyrins. Journal of Physical Chemistry Part B. 119(22):6646-6657. https://doi.org/10.1021/acs.jpcb.5b01351

Eshwaran SB, Basu D, Vaikuntam SR, Kutlu B, Wiessner S, Das A, Naskar K, Heinrich G. 2015. Exploring the role of stearic acid in modified zinc aluminum layered double hydroxides and their acrylonitrile butadiene rubber nanocomposites. Journal of Applied Polymer Science. 132(9). https://doi.org/10.1002/app.41539

Fatarelle E, Mylläri V, Ruzzante M, Pogni R, Baratto MC, Skrifvars M, Syrjälä S, Järvelä P. 2015. Sulfonated polyetheretherketone/polypropylene polymer blends for the production of photoactive materials. Journal of Applied Polymer Science. 132(8). https://doi.org/10.1002/app.41509

Ferraris S, Nommeots-Nomm A, Spriano S, Vernè E, Massera J. 2019. Surface reactivity and silanization ability of borosilicate and Mg-Sr-based bioactive glasses. Applied Surface Science. 475:43-55. https://doi.org/10.1016/j.apsusc.2018.12.218

Ghabchi A, Sampath S, Holmberg K, Varis T. 2014. Damage mechanisms and cracking behavior of thermal sprayed WC-CoCr coating under scratch testing. Wear. 313(1-2):97-105. https://doi.org/10.1016/j.wear.2014.02.017

Ghabchi A, Varis T, Holmberg K, Sampath S. 2012. HVOF process control enabling strategies. teoksessa International Thermal Spray Conference and Exposition, ITSC 2012 - Air, Land, Water and the Human Body: Thermal Spray Science and Applications. ASM International. Sivut 465-471.

Giammarco J, Zdyrko B, Petit L, Musgraves JD, Hu J, Agarwal A, Kimerling L, Richardson K, Luzinov I. 2011. Towards universal enrichment nanocoating for IR-ATR waveguides. Chemical Communications. 47(32):9104-9106. https://doi.org/10.1039/c1cc12780b

Goh J-Q, Malola S, Häkkinen H, Akola J. 2015. Silver sulfide nanoclusters and the superatom model. Journal of Physical Chemistry C. 119(3):1583-1590. https://doi.org/10.1021/jp511037x

Goh JQ, Akola J. 2015. Superatom Model for Ag-S Nanocluster with Delocalized Electrons. Journal of Physical Chemistry C. 119(36):21165-21172. https://doi.org/10.1021/acs.jpcc.5b05824

Goh J-Q, Akola J, Ferrando R. 2017. Geometric Structure and Chemical Ordering of Large AuCu Clusters: A Computational Study. Journal of Physical Chemistry C. 121(20):10809-10816. https://doi.org/10.1021/acs.jpcc.6b11958

Goyos-Ball L, Prado C, Díaz R, Fernández E, Ismailov A, Kumpulainen T, Levänen E, Torrecillas R, Fernández A. 2018. The effects of laser patterning 10CeTZP-Al2O3 nanocomposite disc surfaces: Osseous differentiation and cellular arrangement in vitro. Ceramics International. 44(8):9472-9478. https://doi.org/10.1016/j.ceramint.2018.02.164

Gupta SK, Wu HH, Kwak KJ, Casal P, Nicholson TR, Wen X, Anisha R, Bhushan B, Berger PR, Lu W, Brillson LJ, Lee SC. 2011. Interfacial design and structure of protein/polymer films on oxidized AlGaN surfaces. Journal of Physics D: Applied Physics. 44(3). https://doi.org/10.1088/0022-3727/44/3/034010

Haapanen J, Aromaa M, Teisala H, Juuti P, Tuominen M, Sillanpää M, Stepien M, Saarinen JJ, Toivakka M, Kuusipalo J, Mäkelä JM. 2019. On the limit of superhydrophobicity: Defining the minimum amount of TiO2 nanoparticle coating. Materials Research Express. 6(3). https://doi.org/10.1088/2053-1591/aaf2ee

Haiko O, Miettunen I, Porter D, Ojala N, Ratia V, Heino V, Kemppainen A. 2017. Effect of finish rolling and quench stop temperatures on impact-abrasive wear resistance of 0.35 % carbon direct-quenched steel. Tribologia. 35(1-2):5-21.

Haiko O, Valtonen K, Kaijalainen A, Uusikallio S, Hannula J, Liimatainen T, Kömi J. 2019. Effect of tempering on the impact-abrasive and abrasive wear resistance of ultra-high strength steels. Wear. 440-441. https://doi.org/10.1016/j.wear.2019.203098

Haiko O, Javaheri V, Valtonen K, Kaijalainen A, Hannula J, Kömi J. 2020. Effect of prior austenite grain size on the abrasive wear resistance of ultra-high strength martensitic steels. Wear. 454-455. https://doi.org/10.1016/j.wear.2020.203336

Haiko O, Heino V, Porter DA, Uusitalo J, Kömi J. 2019. Effect of microstructure on the abrasive wear resistance of steels with hardness 450 HV. Tribologia. 36(1):54-57. https://doi.org/10.30678/FJT.82443

Hakola H, Sariola-Leikas E, Efimov A, Tkachenko NV. 2016. Effect of Hole Transporting Material on Charge Transfer Processes in Zinc Phthalocyanine Sensitized ZnO Nanorods. Journal of Physical Chemistry C. 120(13):7044-7051. https://doi.org/10.1021/acs.jpcc.6b01583

Hannula MK, Lahtonen KT, Isotalo TJ, Saari JS, Valden MO. 2016. Thermal Modification of ALD Grown Titanium Oxide Ultra Thin Film for Photoanode Applications. Julkaisun esittämispaikka: Symposium on Future Prospects for Photonics, Tampere, Suomi.

Harra J, Tuominen M, Juuti P, Rissler J, Koivuluoto H, Haapanen J, Niemelä-Anttonen H, Stenroos C, Teisala H, Lahti J, Kuusipalo J, Vuoristo P, Mäkelä JM. 2018. Characteristics of nFOG, an aerosol-based wet thin film coating technique. Journal of Coatings Technology Research. 15(3):623-632. https://doi.org/10.1007/s11998-017-0022-7

Heikkinen JJ, Kivimäki L, Hytönen VP, Kulomaa MS, Hormi OEO. 2012. Printable and flexible macroporous organosilica film with high protein adsorption capacity. Thin Solid Films. 520(6):1934-1937. https://doi.org/10.1016/j.tsf.2011.09.041

Heinonen S, Kannisto M, Nikkanen J-P, Huttunen-Saarivirta E, Karp M, Levänen E. 2016. Photocatalytic and antibacterial properties of ZnO films with different surface topographies on stainless steel substrate. Thin Solid Films. 616:842-849. https://doi.org/10.1016/j.tsf.2016.10.002

Heinonen S, Nikkanen J-P, Huttunen-Saarivirta E, Levänen E. 2017. Investigation of long-term chemical stability of structured ZnO films in aqueous solutions of varying conditions. Thin Solid Films. 638:410-419. https://doi.org/10.1016/j.tsf.2017.07.055

Heiskanen JP, Manninen VM, Pankov D, Omar WAE, Kastinen T, Hukka TI, Lemmetyinen HJ, Hormi OEO. 2015. Aryl end-capped quaterthiophenes applied as anode interfacial layers in inverted organic solar cells. Thin Solid Films. 574:196-206. https://doi.org/10.1016/j.tsf.2014.12.007

Heyda J, Kožíšek M, Bednárova L, Thompson G, Konvalinka J, Vondrášek J, Jungwirth P. 2011. Urea and guanidinium induced denaturation of a Trp-cage miniprotein. Journal of Physical Chemistry Part B. 115(28):8910-8924. https://doi.org/10.1021/jp200790h

Heydari G, Sedighi Moghaddam M, Tuominen M, Fielden M, Haapanen J, Mäkelä JM, Claesson PM. 2016. Wetting hysteresis induced by temperature changes: Supercooled water on hydrophobic surfaces. Journal of Colloid and Interface Science. 468:21-33. https://doi.org/10.1016/j.jcis.2016.01.040

Hiltunen A, Ruoko T-P, Iivonen T, Lahtonen K, Ali-Löytty H, Sarlin E, Valden M, Leskelä M, Tkachenko N. 2018. Design aspects of all atomic layer deposited TiO2–Fe2O3 scaffold-absorber photoanodes for water splitting. Sustainable Energy & Fuels. 2(9):2124-2130. https://doi.org/10.1039/C8SE00252E

Hintikka J, Lehtovaara A, Mäntylä A. 2015. Fretting-induced friction and wear in large flat-on-flat contact with quenched and tempered steel. Tribology International. 92:191-202. https://doi.org/10.1016/j.triboint.2015.06.008

Hintikka J, Lehtovaara A, Mäntylä A. 2016. Normal displacements in non-Coulomb friction conditions during fretting. Tribology International. 94:633-639. https://doi.org/10.1016/j.triboint.2015.10.029

Hintikka J, Lehtovaara A, Mäntylä A. 2017. Third Particle Ejection Effects on Wear with Quenched and Tempered Steel Fretting Contact. TRIBOLOGY TRANSACTIONS. 60(1):70-78. https://doi.org/10.1080/10402004.2016.1146813

Hintikka J, Mäntylä A, Vaara J, Frondelius T, Lehtovaara A. 2019. Stable and unstable friction in fretting contacts. Tribology International. 131:73-82. https://doi.org/10.1016/j.triboint.2018.10.014

Hintikka J, Mäntylä A, Vaara J, Frondelius T, Juoksukangas J, Lehtovaara A. 2019. Running-in in fretting, transition from near-stable friction regime to gross sliding. Tribology International. 143. https://doi.org/10.1016/j.triboint.2019.106073

Hladilkova J, Prokop Z, Chaloupkova R, Damborsky J, Jungwirth P. 2013. Release of halide ions from the buried active site of the haloalkane dehalogenase LinB revealed by stopped-flow fluorescence analysis and free energy calculations. Journal of Physical Chemistry Part B. 117(46):14329-14335. https://doi.org/10.1021/jp409040u

Hladílková J, Fischer HE, Jungwirth P, Mason PE. 2015. Hydration of hydroxyl and amino groups examined by molecular dynamics and neutron scattering. Journal of Physical Chemistry Part B. 119(21):6357-6365. https://doi.org/10.1021/jp510528u

Holmberg K, Kivikytö-Reponen P, Härkisaari P, Valtonen K, Erdemir A. 2017. Global energy consumption due to friction and wear in the mining industry. Tribology International. 115:116-139. https://doi.org/10.1016/j.triboint.2017.05.010

Hongisto M, Veber A, Boetti NG, Danto S, Jubera V, Petit L. 2020. Transparent Yb3+ doped phosphate glass-ceramics. Ceramics International. https://doi.org/10.1016/j.ceramint.2020.01.121

Huttunen-Saarivirta E, Isotahdon E, Metsäjoki J, Salminen T, Ronkainen H, Carpén L. 2019. Behaviour of leaded tin bronze in simulated seawater in the absence and presence of tribological contact with alumina counterbody: Corrosion, wear and tribocorrosion. Tribology International. 129:257-271. https://doi.org/10.1016/j.triboint.2018.08.021

Huttunen-Saarivirta E, Kilpi L, Pasanen AT, Salminen T, Ronkainen H. 2020. Tribocorrosion behaviour of tin bronze CuSn12 under a sliding motion in NaCl containing environment: Contact to inert vs. reactive counterbody. Tribology International. 151. https://doi.org/10.1016/j.triboint.2020.106389

Isakov M, Matikainen V, Koivuluoto H, May M. 2017. Systematic analysis of coating-substrate interactions in the presence of flow localization. Surface and Coatings Technology. 324:264-280. https://doi.org/10.1016/j.surfcoat.2017.05.040

Isoaho R, Aho A, Tukiainen A, Aho T, Raappana M, Salminen T, Reuna J, Guina M. 2019. Photovoltaic properties of low-bandgap (0.7–0.9 eV) lattice-matched GaInNAsSb solar junctions grown by molecular beam epitaxy on GaAs. Solar Energy Materials and Solar Cells. 195:198-203. https://doi.org/10.1016/j.solmat.2019.02.030

Janka L, Norpoth J, Trache R, Berger LM. 2016. Influence of heat treatment on the abrasive wear resistance of a Cr3C2NiCr coating deposited by an ethene-fuelled HVOF spray process. Surface and Coatings Technology. 291:444-451. https://doi.org/10.1016/j.surfcoat.2016.02.066

Janka L, Norpoth J, Trache R, Thiele S, Berger LM. 2017. HVOF- and HVAF-Sprayed Cr3C2-NiCr Coatings Deposited from Feedstock Powders of Spherical Morphology: Microstructure Formation and High-Stress Abrasive Wear Resistance Up to 800 °C. Journal of Thermal Spray Technology. 26(7):1720–1731. https://doi.org/10.1007/s11666-017-0621-y

Janka L, Berger LM, Norpoth J, Trache R, Thiele S, Tomastik C, Matikainen V, Vuoristo P. 2018. Improving the high temperature abrasion resistance of thermally sprayed Cr3C2-NiCr coatings by WC addition. Surface and Coatings Technology. 337:296-305. https://doi.org/10.1016/j.surfcoat.2018.01.035

Javanainen M, Melcrová A, Magarkar A, Jurkiewicz P, Hof M, Jungwirth P, Martinez-Seara H. 2017. Two cations, two mechanisms: Interactions of sodium and calcium with zwitterionic lipid membranes. Chemical Communications. 53(39):5380-5383. https://doi.org/10.1039/c7cc02208e

Javanainen M, Ollila OHS, Martinez-Seara H. 2020. Rotational Diffusion of Membrane Proteins in Crowded Membranes. Journal of Physical Chemistry B. 124(15):2994-3001. https://doi.org/10.1021/acs.jpcb.0c00884

Jönkkäri I, Poliakova V, Mylläri V, Anderson R, Andersson M, Vuorinen J. 2020. Compounding and characterization of recycled multilayer plastic films. Journal of Applied Polymer Science. https://doi.org/10.1002/app.49101

Juoksukangas J, Lehtovaara A, Mäntylä A. 2016. A comparison of relative displacement fields between numerical predictions and experimental results in fretting contact. Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 230(10):1273-1287. https://doi.org/10.1177/1350650116633573

Juoksukangas J, Lehtovaara A, Mäntylä A. 2016. Experimental and numerical investigation of fretting fatigue behavior in bolted joints. Tribology International. 103:440-448. https://doi.org/10.1016/j.triboint.2016.07.021

Juoksukangas J, Nurmi V, Hintikka J, Vippola M, Lehtovaara A, Mäntylä A, Vaara J, Frondelius T. 2019. Characterization of cracks formed in large flat-on-flat fretting contact. International Journal of Fatigue. 124:361-370. https://doi.org/10.1016/j.ijfatigue.2019.03.004

Kalimeri M, Rahaman O, Melchionna S, Sterpone F. 2013. How conformational flexibility stabilizes the hyperthermophilic elongation factor G-domain. Journal of Physical Chemistry Part B. 117(44):13775-13785. https://doi.org/10.1021/jp407078z

Kanerva U, Suhonen T, Lagerbom J, Levänen E. 2015. Evaluation of crushing strength of spray-dried MgAl2O4 granule beds. Ceramics International. 41(7):8494-8500. https://doi.org/10.1016/j.ceramint.2015.03.056

Kapgate BP, Das C, Das A, Basu D, Wiessner S, Reuter U, Heinrich G. 2016. Reinforced chloroprene rubber by in situ generated silica particles: Evidence of bound rubber on the silica surface. Journal of Applied Polymer Science. 133(30). https://doi.org/10.1002/app.43717

Kapgate BP, Das C, Basu D, Das A, Heinrich G, Reuter U. 2014. Effect of silane integrated sol-gel derived in situ silica on the properties of nitrile rubber. Journal of Applied Polymer Science. 131(15). https://doi.org/10.1002/app.40531

Karhu M, Lagerbom J, Solismaa S, Honkanen M, Ismailov A, Räisänen ML, Huttunen-Saarivirta E, Levänen E, Kivikytö-Reponen P. 2019. Mining tailings as raw materials for reaction-sintered aluminosilicate ceramics: Effect of mineralogical composition on microstructure and properties. Ceramics International. 45(4):4840-4848. https://doi.org/10.1016/j.ceramint.2018.11.180

Karilainen T, Timr Š, Vattulainen I, Jungwirth P. 2015. Oxidation of cholesterol does not alter significantly its uptake into high-density lipoprotein particles. Journal of Physical Chemistry Part B. 119(13):4594-4600. https://doi.org/10.1021/acs.jpcb.5b00240

Katava M, Kalimeri M, Stirnemann G, Sterpone F. 2016. Stability and Function at High Temperature. What Makes a Thermophilic GTPase Different from Its Mesophilic Homologue. Journal of Physical Chemistry Part B. 120(10):2721-2730. https://doi.org/10.1021/acs.jpcb.6b00306

Kaunisto K, Kotilainen M, Karhu M, Lagerbom J, Vuorinen T, Honkanen M, Vippola M, Turunen E. 2018. The effect of carbon and nickel additions on the precursor synthesis of Cr3C2-Ni nanopowder. Ceramics International. 44(8):9338-9346. https://doi.org/10.1016/j.ceramint.2018.02.146

Khan MN, Zharnikov M. 2014. Fabrication of ssDNA/oligo(ethylene glycol) monolayers by promoted exchange reaction with thiol and disulfide substituents. Journal of Physical Chemistry C. 118(6):3093-3101. https://doi.org/10.1021/jp411353f

Khan MN, Zharnikov M. 2013. Fabrication of ssDNA/Oligo(ethylene glycol) monolayers and patterns by exchange reaction promoted by ultraviolet light irradiation. Journal of Physical Chemistry C. 117(47):24883-24893. https://doi.org/10.1021/jp408819k

Khan MN, Tjong V, Chilkoti A, Zharnikov M. 2013. Spectroscopic study of a DNA brush synthesized in situ by surface initiated enzymatic polymerization. Journal of Physical Chemistry Part B. 117(34):9929-9938. https://doi.org/10.1021/jp404774x

Khan MN, Zharnikov M. 2013. Irradiation promoted exchange reaction with disulfide substituents. Journal of Physical Chemistry C. 117(28):14534-14543. https://doi.org/10.1021/jp4006026

Khvorost TA, Beliaev LY, Potalueva E, Laptenkova AV, Selyutin AA, Bogachev NA, Skripkin MY, Ryazantsev MN, Tkachenko N, Mereshchenko AS. 2020. Ultrafast Photochemistry of the [Cr(NCS)6]3- Complex in Dimethyl Sulfoxide and Dimethylformamide upon Excitation into Ligand-Field Electronic State. Journal of Physical Chemistry B. 124(18):3724-3733. https://doi.org/10.1021/acs.jpcb.0c00088

Kiilakoski J, Lindroos M, Matikainen V, Apostol N, Koivuluoto H, Vuoristo P. 2015. Characterization Of High-Velocity Single Particle Impacts On Thermally Sprayed Ceramic Coatings. teoksessa International Thermal Spray Conference & Exposition 2015.

Kiilakoski J, Eronen V, Vuoristo P. 2015. Wear Properties of Thermally Sprayed Tungsten-Carbide Coatings in Paper Machine Environments. Tribologia - Finnish Journal of Tribology. 33(2):29.

Kiilakoski J, Lutoschkin A, Plachetta M, Apostol M, Koivuluoto H, Killinger A, Vuoristo P. 2016. Fracture Characteristics of High-Velocity Suspension Flame-Sprayed Aluminum Oxide Coatings. teoksessa International Thermal Spray Conference & Exposition, ITSC 2016. DVS Media GmbH. Sivut 466-471.

Kiilakoski J, Lindroos M, Apostol M, Koivuluoto H, Kuokkala V-T, Vuoristo P. 2016. Characterization of High-Velocity Single Particle Impacts on Plasma-Sprayed Ceramic Coatings. Journal of Thermal Spray Technology. 25:1127-1137. https://doi.org/10.1007/s11666-016-0428-2

Kiilakoski J, Lukac F, Koivuluoto H, Vuoristo P. 2017. Cavitation wear characteristics of Al2O3-ZrO2-ceramic coatings deposited by APS and HVOF -processes. teoksessa Internationl Thermal Spray Conference ITSC 2017, Conference Proceedings: June 7-9, 2017, Düsseldorf, Germany.. Düsseldorf: DVS Media GmbH. Sivut 928-933. (DVS-Berichte / DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V.).

Kiilakoski J, Langlade C, Koivuluoto H, Vuoristo P. 2019. Characterizing the micro-impact fatigue behavior of APS and HVOF-sprayed ceramic coatings. Surface and Coatings Technology. 371:245-254. https://doi.org/10.1016/j.surfcoat.2018.10.097

Kiilakoski J, Puranen J, Heinonen E, Koivuluoto H, Vuoristo P. 2019. Characterization of Powder-Precursor HVOF-Sprayed Al2O3-YSZ/ZrO2 Coatings. Journal of Thermal Spray Technology. 28(1-2):98-107. https://doi.org/10.1007/s11666-018-0816-x

Kiilakoski J, Trache R, Björklund S, Joshi S, Vuoristo P. 2019. Process Parameter Impact on Suspension-HVOF-Sprayed Cr2O3 Coatings. Journal of Thermal Spray Technology. https://doi.org/10.1007/s11666-019-00940-7

Kohagen M, Mason PE, Jungwirth P. 2014. Accurate description of calcium solvation in concentrated aqueous solutions. Journal of Physical Chemistry Part B. 118(28):7902-7909. https://doi.org/10.1021/jp5005693

Koivuluoto H, Matikainen V, Larjo J, Vuoristo P. 2018. Novel Online Diagnostic Analysis for In-Flight Particle Properties in Cold Spraying. Journal of Thermal Spray Technology. 27(3):423–432. https://doi.org/10.1007/s11666-018-0685-3

Koivuluoto H, Larjo J, Marini D, Pulci G, Marra F. 2020. Cold-Sprayed Al6061 coatings: Online spray monitoring and influence of process parameters on coating properties. Coatings. 10(4). https://doi.org/10.3390/coatings10040348

Koivusaari KJ, Rantala TT, Leppävuori S. 2000. Calculated electronic density of states and structural properties of tetrahedral amorphous carbon. Diamond and Related Materials. 9(3):736-740. https://doi.org/10.1016/S0925-9635(99)00286-1

Koskela JE, Vapaavuori J, Hautala J, Priimagi A, Faul CFJ, Kaivola M, Ras RHA. 2012. Surface-relief gratings and stable birefringence inscribed using light of broad spectral range in supramolecular polymer-bisazobenzene complexes. Journal of Physical Chemistry C. 116(3):2363-2370. https://doi.org/10.1021/jp210706n

Kotilainen M, Honkanen M, Mizohata K, Vuoristo P. 2016. Influence of temperature-induced copper diffusion on degradation of selective chromium oxy-nitride solar absorber coatings. Solar Energy Materials and Solar Cells. 145:323-332. https://doi.org/10.1016/j.solmat.2015.10.034

Kotilainen M, Krumpolec R, Franta D, Souček P, Homola T, Cameron DC, Vuoristo P. 2017. Hafnium oxide thin films as a barrier against copper diffusion in solar absorbers. Solar Energy Materials and Solar Cells. 166:140-146. https://doi.org/10.1016/j.solmat.2017.02.033

Kulig W, Agmon N. 2014. Both zundel and eigen isomers contribute to the IR spectrum of the gas-phase H9O4 + cluster. Journal of Physical Chemistry Part B. 118(1):278-286. https://doi.org/10.1021/jp410446d

Kulju S, Riegger L, Koltay P, Mattila K, Hyväluoma J. 2018. Fluid flow simulations meet high-speed video: Computer vision comparison of droplet dynamics. Journal of Colloid and Interface Science. 522:48-56. https://doi.org/10.1016/j.jcis.2018.03.053

Kuzmin MG, Soboleva IV, Durandin NA, Lisitsyna ES, Kuzmin VA. 2014. Microphase mechanism of "superquenching" of luminescent probes in aqueous solutions of DNA and some other polyelectrolytes. Journal of Physical Chemistry Part B. 118(15):4245-4252. https://doi.org/10.1021/jp500713q

Kwolek U, Kulig W, Wydro P, Nowakowska M, Róg T, Kepczynski M. 2015. Effect of Phosphatidic Acid on Biomembrane: Experimental and Molecular Dynamics Simulations Study. Journal of Physical Chemistry Part B. 119(31):10042-10051. https://doi.org/10.1021/acs.jpcb.5b03604

Lahti J, Lavonen J, Lahtinen K, Johansson P, Seppänen T, Cameron DC. 2016. Improved properties for packaging materials by nanoscale surface modification and ALD barrier coating. teoksessa TAPPI International Conference on Nanotechnology for Renewable Materials 2016. TAPPI Press. Sivut 684-706.

Lampio K, Karvinen R. 2017. Optimization of convectively cooled heat sinks. Microelectronics Reliability. 79:473-479. https://doi.org/10.1016/j.microrel.2017.06.011

Lehmusto J, Olin M, Viljanen J, Kalliokoski J, Mylläri F, Toivonen J, Dal Maso M, Hupa L. 2019. Detection of gaseous species during KCl-induced high-temperature corrosion by the means of CPFAAS and CI-APi-TOF. Materials and Corrosion. https://doi.org/10.1002/maco.201910964

Lehtonen J, Koivuluoto H, Ge Y, Juselius A, Hannula SP. 2020. Cold gas spraying of a high-entropy CrFeNiMn equiatomic alloy. Coatings. 10(1). https://doi.org/10.3390/coatings10010053

Lepcha A, Maccato C, Mettenbörger A, Andreu T, Mayrhofer L, Walter M, Olthof S, Ruoko TP, Klein A, Moseler M, Meerholz K, Morante JR, Barreca D, Mathur S. 2015. Electrospun Black Titania Nanofibers: Influence of Hydrogen Plasma-Induced Disorder on the Electronic Structure and Photoelectrochemical Performance. Journal of Physical Chemistry C. 119(33):18835-18842. https://doi.org/10.1021/acs.jpcc.5b02767

Levoska J, Rantala TT, Lenkkeri J. 1989. Numerical simulation of temperature distributions in layered structures during laser processing. Applied Surface Science. 36(1-4):12-22. https://doi.org/10.1016/0169-4332(89)90895-7

Lindgren M, Suihkonen R, Vuorinen J. 2015. Erosive wear of various stainless steel grades used as impeller blade materials in high temperature aqueous slurry. Wear. 328-329:391-400. https://doi.org/10.1016/j.wear.2015.03.014

Lindgren M, Siljander S, Suihkonen R, Pohjanne P, Vuorinen J. 2016. Erosion–corrosion resistance of various stainless steel grades in high-temperature sulfuric acid solution. Wear. 364-365:10-21. https://doi.org/10.1016/j.wear.2016.06.007

Lindroos M, Apostol M, Heino V, Valtonen K, Laukkanen A, Holmberg K, Kuokkala VT. 2015. The deformation, strain hardening, and wear behavior of chromium-alloyed hadfield steel in abrasive and impact conditions. Tribology Letters. 57(3). https://doi.org/10.1007/s11249-015-0477-6

Lindroos M, Ratia V, Apostol M, Valtonen K, Laukkanen A, Molnar W, Holmberg K, Kuokkala VT. 2015. The effect of impact conditions on the wear and deformation behavior of wear resistant steels. Wear. 328-329:197-205. https://doi.org/10.1016/j.wear.2015.02.032

Linjamaa A, Lehtovaara A, Kallio M, Léger A. 2019. Running-in effects on friction of journal bearings under slow sliding speeds. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. https://doi.org/10.1177/1350650119864758

Lisitsyna ES, Ketola T-M, Morin-Picardat E, Liang H, Hanzlíková M, Urtti A, Yliperttula M, Vuorimaa-Laukkanen E. 2017. Time-Resolved Fluorescence Spectroscopy Reveals Fine Structure and Dynamics of Poly(l-lysine) and Polyethylenimine Based DNA Polyplexes. Journal of Physical Chemistry B. 121(48):10782-10792. https://doi.org/10.1021/acs.jpcb.7b08394

Ma L, Laasonen K, Akola J. 2017. Catalytic Activity of AuCu Clusters on MgO(100): Effect of Alloy Composition for CO Oxidation. Journal of Physical Chemistry C. 121(20):10876-10886. https://doi.org/10.1021/acs.jpcc.6b12054

Magarkar A, Parkkila P, Viitala T, Lajunen T, Mobarak E, Licari G, Cramariuc O, Vauthey E, Róg T, Bunker A. 2018. Membrane bound COMT isoform is an interfacial enzyme: General mechanism and new drug design paradigm. Chemical Communications. 54(28):3440-3443. https://doi.org/10.1039/c8cc00221e

Mahmood N, Khan AU, Stöckelhuber KW, Das A, Jehnichen D, Heinrich G. 2014. Carbon nanotubes-filled thermoplastic polyurethane-urea and carboxylated acrylonitrile butadiene rubber blend nanocomposites. Journal of Applied Polymer Science. 131(11). https://doi.org/10.1002/app.40341

Mäkinen J, Vehanen A, Hautojärvi P, Huomo H, Lahtinen J, Nieminen RM, Valkealahti S. 1986. Vacancy-type defect distributions near argon sputtered Al(100) surface studied by variable-energy positrons and molecular dynamics simulations. Surface Science. 175(2):385-414. https://doi.org/10.1016/0039-6028(86)90242-6

Mäntylä A, Hintikka J, Frondelius T, Vaara J, Lehtovaara A, Juoksukangas J. 2019. Prediction of contact condition and surface damage by simulating variable friction coefficient and wear. Tribology International. https://doi.org/10.1016/j.triboint.2019.106054

Mäntyranta A, Heino V, Isotahdon E, Salminen T, Huttunen-Saarivirta E. 2019. Tribocorrosion behaviour of two low-alloy steel grades in simulated waste solution. Tribology International. 138:250-262. https://doi.org/10.1016/j.triboint.2019.05.032

Mason PE, Wernersson E, Jungwirth P. 2012. Accurate description of aqueous carbonate ions: An effective polarization model verified by neutron scattering. Journal of Physical Chemistry Part B. 116(28):8145-8153. https://doi.org/10.1021/jp3008267

Matikainen V, Koivuluoto H, Milanti A, Vuoristo P. 2015. Advanced coatings by novel high-kinetic thermal spray processes. Materia. 73(1):46-50.

Matikainen V, Bolelli G, Koivuluoto H, Sassatelli P, Lusvarghi L, Vuoristo P. 2017. Sliding wear behaviour of HVOF and HVAF sprayed Cr3C2-based coatings. Wear. 388-389:57-71. https://doi.org/10.1016/j.wear.2017.04.001

Matikainen V, Bolelli G, Koivuluoto H, Honkanen M, Vippola M, Lusvarghi L, Vuoristo P. 2017. A Study of Cr3C2-Based HVOF- and HVAF-Sprayed Coatings: Microstructure and Carbide Retention. Journal of Thermal Spray Technology. 26(6):1-18. https://doi.org/10.1007/s11666-017-0578-x

Matikainen V, Koivuluoto H, Vuoristo P, Schubert J, Houdková. 2018. Effect of nozzle geometry on the microstructure and properties of hvaf-sprayed wc-10co4cr and cr3c2-25nicr coatings. Journal of Thermal Spray Technology. 27(4):680-694. https://doi.org/10.1007/s11666-018-0717-z

Matikainen V, Rubio Peregrina S, Ojala N, Koivuluoto H, Schubert J, Houdková , Vuoristo P. 2019. Erosion wear performance of WC-10Co4Cr and Cr3C2-25NiCr coatings sprayed with high-velocity thermal spray processes. Surface and Coatings Technology. 370:196-212. https://doi.org/10.1016/j.surfcoat.2019.04.067

Matikainen V, Koivuluoto H, Vuoristo P. 2020. A study of Cr3C2-based HVOF- and HVAF-sprayed coatings: Abrasion, dry particle erosion and cavitation erosion resistance. Wear. 446-447. https://doi.org/10.1016/j.wear.2020.203188

Matikainen V, Rubio Peregrina S, Ojala N, Koivuluoto H, Schubert J, Houdková , Vuoristo P. 2019. Slurry and dry particle erosion wear properties of WC-10Co4Cr and Cr3C2-25NiCr hardmetal coatings deposited by HVOF and HVAF spray processes. Tribologia. 36(1-2):58-61. https://doi.org/10.30678/FJT.83590

Melcr J, Martinez-Seara H, Nencini R, Kolafa J, Jungwirth P, Ollila OHS. 2018. Accurate Binding of Sodium and Calcium to a POPC Bilayer by Effective Inclusion of Electronic Polarization. Journal of Physical Chemistry B. 122(16):4546-4557. https://doi.org/10.1021/acs.jpcb.7b12510

Mikkonen R, Mäntysalo M. 2018. Evaluation of screen printed silver trace performance and long-term reliability against environmental stress on a low surface energy substrate. Microelectronics Reliability. 86:54-65. https://doi.org/10.1016/j.microrel.2018.05.010

Milanti A, Koivuluoto H, Vuoristo P. 2015. Influence of the Spray Gun Type on Microstructure and Properties of HVAF Sprayed Fe-Based Corrosion Resistant Coatings. Journal of Thermal Spray Technology. 24(7):1312-1322. https://doi.org/10.1007/s11666-015-0298-z

Milanti A, Matikainen V, Koivuluoto H, Bolelli G, Lusvarghi L, Vuoristo P. 2015. Effect of spraying parameters on the microstructural and corrosion properties of HVAF-sprayed Fe-Cr-Ni-B-C coatings. Surface and Coatings Technology. 277:81-90. https://doi.org/10.1016/j.surfcoat.2015.07.018

Milanti A, Matikainen V, Bolelli G, Koivuluoto H, Lusvarghi L, Vuoristo P. 2016. Microstructure and Sliding Wear Behavior of Fe-Based Coatings Manufactured with HVOF and HVAF Thermal Spray Processes. Journal of Thermal Spray Technology. 25(5):1040–1055. https://doi.org/10.1007/s11666-016-0410-z

Milne D, Wilson JIB, Rantala TT, Lenkkeri J. 1989. Morphological and structural changes in laser CVD of silicon: comparison of theoretical temperature calculations with experimental results. Applied Surface Science. 43(1-4):81-86. https://doi.org/10.1016/0169-4332(89)90194-3

Mylläri V, Fatarella E, Ruzzante M, Pogni R, Baratto MC, Skrifvars M, Syrjälä S, Järvelä P. 2015. Production of sulfonated polyetheretherketone/polypropylene fibers for photoactive textiles. Journal of Applied Polymer Science. 132(39). https://doi.org/10.1002/app.42595

Mylläri V, Ruoko T-P, Syrjälä S. 2015. A comparison of rheology and FTIR in the study of polypropylene and polystyrene photodegradation. Journal of Applied Polymer Science. 132(28). https://doi.org/10.1002/app.42246

Mylläri V, Hartikainen S, Poliakova V, Anderson R, Jönkkäri I, Pasanen P, Andersson M, Vuorinen J. 2016. Detergent impurity effect on recycled HDPE: Properties after repetitive processing. Journal of Applied Polymer Science. 133(31). https://doi.org/10.1002/app.43766

Myllymäki S, Putaala J, Hannu J, Kunnari E, Mäntysalo M. 2016. RF measurements to pinpoint defects in inkjet-printed, thermally and mechanically stressed coplanar waveguides. Microelectronics Reliability. 65:142-150. https://doi.org/10.1016/j.microrel.2016.08.021

Niittymäki M, Lahti K, Suhonen T, Metsäjoki J. 2015. Dielectric Breakdown Strength of Thermally Sprayed Ceramic Coatings: Effects of Different Test Arrangements. Journal of Thermal Spray Technology. 24(3):542-551. https://doi.org/10.1007/s11666-014-0211-1

Nurmi V, Hintikka J, Juoksukangas J, Honkanen M, Vippola M, Lehtovaara A, Mäntylä A, Vaara J, Frondelius T. 2019. The formation and characterization of fretting-induced degradation layers using quenched and tempered steel. Tribology International. 131:258-267. https://doi.org/10.1016/j.triboint.2018.09.012

Ojala N, Valtonen K, Heino V, Kallio M, Aaltonen J, Siitonen P, Kuokkala VT. 2014. Effects of composition and microstructure on the abrasive wear performance of quenched wear resistant steels. Wear. 317(1-2):225-232. https://doi.org/10.1016/j.wear.2014.06.003

Ojha N, Laihinen T, Salminen T, Lastusaari M, Petit L. 2018. Influence of the phosphate glass melt on the corrosion of functional particles occurring during the preparation of glass-ceramics. Ceramics International. 44(10):11807-11811. https://doi.org/10.1016/j.ceramint.2018.03.267

Oksa M, Varis T, Ruusuvuori K. 2014. Performance testing of iron based thermally sprayed HVOF coatings in a biomass-fired fluidised bed boiler. Surface and Coatings Technology. 251:191-200. https://doi.org/10.1016/j.surfcoat.2014.04.025

Oksa M, Tuurna S, Varis T. 2013. Increased lifetime for biomass and waste to energy power plant boilers with HVOF coatings: High temperature corrosion testing under chlorine-containing molten salt. Journal of Thermal Spray Technology. 22(5):783-796. https://doi.org/10.1007/s11666-013-9928-5

Oksanen V, Valtonen K, Andersson P, Vaajoki A, Laukkanen A, Holmberg K, Kuokkala VT. 2015. Comparison of laboratory rolling-sliding wear tests with in-service wear of nodular cast iron rollers against wire ropes. Wear. 340-341:73-81. https://doi.org/10.1016/j.wear.2015.07.006

Oksanen VT, Lehtovaara AJ, Kallio MH. 2017. Load capacity of lubricated bismuth bronze bimetal bearing under elliptical sliding motion. Wear. 388-389:72-80. https://doi.org/10.1016/j.wear.2017.05.001

Orlowski A, Kukkurainen S, Pöyry A, Rissanen S, Vattulainen I, Hytönen VP, Róg T. 2015. PIP2 and Talin Join Forces to Activate Integrin. Journal of Physical Chemistry Part B. 119(38):12381-12389. https://doi.org/10.1021/acs.jpcb.5b06457

Palivec V, Pluharová E, Unger I, Winter B, Jungwirth P. 2014. DNA lesion can facilitate base ionization: Vertical ionization energies of aqueous 8-oxoguanine and its nucleoside and nucleotide. Journal of Physical Chemistry Part B. 118(48):13833-13837. https://doi.org/10.1021/jp5111086

Palola S, Sarlin E, Kolahgar Azari S, Koutsos V, Vuorinen J. 2017. Microwave induced hierarchical nanostructures on aramid fibers and their influence on adhesion properties in a rubber matrix. Applied Surface Science. 410:145-153. https://doi.org/10.1016/j.apsusc.2017.03.070

Passananti M, Zapadinsky E, Zanca T, Kangasluoma J, Myllys N, Rissanen MP, Kurtén T, Ehn M, Attoui M, Vehkamäki H. 2019. How well can we predict cluster fragmentation inside a mass spectrometer?. Chemical Communications. 55(42):5946-5949. https://doi.org/10.1039/c9cc02896j

Paterová J, Rembert KB, Heyda J, Kurra Y, Okur HI, Liu WR, Hilty C, Cremer PS, Jungwirth P. 2013. Reversal of the hofmeister series: Specific ion effects on peptides. Journal of Physical Chemistry Part B. 117(27):8150-8158. https://doi.org/10.1021/jp405683s

Pitkänen H, Alatalo M, Puisto A, Ropo M, Kokko K, Vitos L. 2013. Ab initio study of the surface properties of austenitic stainless steel alloys. Surcface Science. 609:190-194. https://doi.org/10.1016/j.susc.2012.12.007

Pluhařová E, Ončák M, Seidel R, Schroeder C, Schroeder W, Winter B, Bradforth SE, Jungwirth P, Slavíček P. 2012. Transforming anion instability into stability: Contrasting photoionization of three protonation forms of the phosphate ion upon moving into water. Journal of Physical Chemistry Part B. 116(44):13254-13264. https://doi.org/10.1021/jp306348b

Pluhařová E, Jungwirth P, Bradforth SE, Slavíček P. 2011. Ionization of purine tautomers in nucleobases, nucleosides, and nucleotides: From the gas phase to the aqueous environment. Journal of Physical Chemistry Part B. 115(5):1294-1305. https://doi.org/10.1021/jp110388v

Poikelispää M, Shakun A, Das A, Vuorinen J. 2016. Improvement of actuation performance of dielectric elastomers by barium titanate and carbon black fillers. Journal of Applied Polymer Science. 133(42). https://doi.org/10.1002/app.44116

Poikelispää M, Shakun A, Sarlin E, Das A, Vuorinen J. 2017. Vegetable fillers for electric stimuli responsive elastomers. Journal of Applied Polymer Science. 134(28). https://doi.org/10.1002/app.45081

Polojärvi V, Aho A, Tukiainen A, Raappana M, Aho T, Schramm A, Guina M. 2016. Influence of As/group-III flux ratio on defects formation and photovoltaic performance of GaInNAs solar cells. Solar Energy Materials and Solar Cells. 149:213-220. https://doi.org/10.1016/j.solmat.2016.01.024

Rahaman O, Kalimeri M, Melchionna S, Hénin J, Sterpone F. 2015. Role of Internal Water on Protein Thermal Stability: The Case of Homologous G Domains. Journal of Physical Chemistry Part B. 119(29):8939-8949. https://doi.org/10.1021/jp507571u

Rahaman O, Kalimeri M, Katava M, Paciaroni A, Sterpone F. 2017. Configurational Disorder of Water Hydrogen-Bond Network at the Protein Dynamical Transition. Journal of Physical Chemistry Part B. 121(28):6792-6798. https://doi.org/10.1021/acs.jpcb.7b03888

Rajan R, Rainosalo E, Ramamoorthy SK, Thomas SP, Zavašnik J, Vuorinen J, Skrifvars M. 2018. Mechanical, thermal, and burning properties of viscose fabric composites: Influence of epoxy resin modification. Journal of Applied Polymer Science. 135(36). https://doi.org/10.1002/app.46673

Rantala TT, Rosén A, Hellsing B. 1986. A Finite Cluster Approach to the Electron-Hole Pair Damping of the Adsorbate Vibration: CO Adsorbed on Cu(100). Studies in Surface Science and Catalysis. 26(C):173-181. https://doi.org/10.1016/S0167-2991(09)61238-6

Rasappa S, Schulte L, Borah D, Morris MA, Ndoni S. 2014. Rapid, Brushless Self-assembly of a PS-b-PDMS Block Copolymer for Nanolithography. Colloids and Interface Science Communications. 2:1-5. https://doi.org/10.1016/j.colcom.2014.07.001

Rasappa S, Borah D, Senthamaraikannan R, Faulkner CC, Shaw MT, Gleeson P, Holmes JD, Morris MA. 2012. Block copolymer lithography: Feature size control and extension by an over-etch technique. Thin Solid Films. 522:318-323. https://doi.org/10.1016/j.tsf.2012.09.017

Rasappa S, Schulte L, Borah D, Hulkkonen H, Ndoni S, Salminen T, Senthamaraikanan R, Morris MA, Niemi T. 2018. Morphology evolution of PS-b-PDMS block copolymer and its hierarchical directed self-assembly on block copolymer templates. Microelectronic Engineering. 192:1-7. https://doi.org/10.1016/j.mee.2018.02.002

Ratia V, Rojacz H, Terva J, Valtonen K, Badisch E, Kuokkala VT. 2015. Effect of Multiple Impacts on the Deformation of Wear-Resistant Steels. Tribology Letters. 57(2). https://doi.org/10.1007/s11249-014-0460-7

Ratia V, Valtonen K, Kemppainen A, Kuokkala VT. 2016. The role of edge-concentrated wear in impact-abrasion testing. Tribology Online. 11(2):410-416. https://doi.org/10.2474/trol.11.410

Rissanen I, Laurson L. 2019. Magnetic non-contact friction from domain wall dynamics actuated by oscillatory mechanical motion. Journal of Physics D: Applied Physics. 52(44). https://doi.org/10.1088/1361-6463/ab351f

Robison AD, Sun S, Poyton MF, Johnson GA, Pellois JP, Jungwirth P, Vazdar M, Cremer PS. 2016. Polyarginine Interacts More Strongly and Cooperatively than Polylysine with Phospholipid Bilayers. Journal of Physical Chemistry Part B. 120(35):9287-9296. https://doi.org/10.1021/acs.jpcb.6b05604

Rubio Hernandez R. 2009. CLC a Colored Liquid Crystal: Prototype Description and Design Opportunities. teoksessa Proceedings of the 11th International Conference: Glass Performace Days.

Rubio Hernandez R, Marshall-Berenguer R, De la Flor San Vicente L. 2004. Envolvente de Vidrio Electrocrómico. teoksessa Foro ARCA II. Arquitectura y Calidad de vida. : Edificación y sostenibilidad: un compromiso posible.

Saari J 2017. Atomikerroskasvatusmenetelmällä kasvatetun titaanidioksidikalvon ominaisuudet valosähkökemiallisessa veden hajottamisessa. 74 Sivumäärä

Saari J, Ali-Löytty H, Valden M. 2018. Role of Oxide Defects in ALD grown TiO2 Coatings on Performance as Photoanode Protection Layer. Julkaisun esittämispaikka: Optics & Photonics Days 2018, Jyväskylä, Suomi.

Saarimaa V, Kaleva A, Nikkanen J-P, Heinonen S, Levänen E, Väisänen P, Markkula A, Juhanoja J. 2017. Supercritical carbon dioxide treatment of hot dip galvanized steel as a surface treatment before coating. Surface and Coatings Technology. 331:137-142. https://doi.org/10.1016/j.surfcoat.2017.10.047

Saarimaa V, Kaleva A, Paunikallio T, Nikkanen J-P, Heinonen S, Levänen E, Väisänen P, Markkula A. 2018. Convenient extraction method for quantification of thin zinc patina layers. Surface and Interface Analysis. 50(5):564-570. https://doi.org/10.1002/sia.6429

Saarimaa V, Fuertes N, Persson D, Zavalis T, Kaleva A, Nikkanen J-P, Levänen E, Heydari G. 2020. Assessment of pitting corrosion in bare and passivated (wet scCO2-induced patination and chemical passivation) hot-dip galvanized steel samples with SVET, FTIR, and SEM (EDS). Materials and Corrosion. https://doi.org/10.1002/maco.202011653

Saarinen JJ, Valtakari D, Bollström R, Stepien M, Haapanen J, Mäkelä JM, Toivakka M. 2016. Roll-to-roll application of photocatalytic TiO2 nanoparticles for printed functionality. teoksessa Advanced Manufacturing, Electronics and Microsystems: TechConnect Briefs 2016. TechConnect. Sivut 47-50.

Salpavaara T, Järveläinen M, Seppälä S, Yli-Hallila T, Verho J, Vilkko M, Lekkala J, Levänen E. 2015. Passive resonance sensor based method for monitoring particle suspensions. Sensors and Actuators B: Chemical. 219:324-330. https://doi.org/10.1016/j.snb.2015.04.121

Salpavaara T, Hänninen A, Antniemi A, Lekkala J, Kellomäki M. 2017. Non-destructive and wireless monitoring of biodegradable polymers. Sensors and Actuators B: Chemical. 251:1018-1025. https://doi.org/10.1016/j.snb.2017.05.116

Santangelo PE, Allesina G, Bolelli G, Lusvarghi L, Matikainen V, Vuoristo P. 2017. Infrared Thermography as a Non-destructive Testing Solution for Thermal Spray Metal Coatings. Journal of Thermal Spray Technology. 26(8):1982–1993. https://doi.org/10.1007/s11666-017-0642-6

Sarjas H, Surzhenkov A, Juhani K, Antonov M, Adoberg E, Kulu P, Viljus M, Traksmaa R, Matikainen V, Vuoristo P. 2017. Abrasive-Erosive Wear of Thermally Sprayed Coatings from Experimental and Commercial Cr3C2-Based Powders. Journal of Thermal Spray Technology. 26(8):2020–2029. https://doi.org/10.1007/s11666-017-0638-2

Sarlin E, Saarimäki M, Sironen R, Lindgren M, Siljander S, Kanerva M, Vuorinen J. 2017. Erosive wear of filled vinylester composites in water and acidic media at elevated temperature. Wear. 390-391:84-92. https://doi.org/10.1016/j.wear.2017.07.011

Sassatelli P, Bolelli G, Lassinantti Gualtieri M, Heinonen E, Honkanen M, Lusvarghi L, Manfredini T, Rigon R, Vippola M. 2018. Properties of HVOF-sprayed Stellite-6 coatings. Surface and Coatings Technology. 338:45-62. https://doi.org/10.1016/j.surfcoat.2018.01.078

Selvan NT, Eshwaran SB, Das A, Stöckelhuber KW, Wießner S, Pötschke P, Nando GB, Chervanyov AI, Heinrich G. 2016. Piezoresistive natural rubber-multiwall carbon nanotube nanocomposite for sensor applications. Sensors and Actuators, A: Physical. 239:102-113. https://doi.org/10.1016/j.sna.2016.01.004

Singh S, Valkama M, Epp M, Anttila L, Schlecker W, Ingber E. 2015. Digital correction of frequency response mismatches in 2-channel time-interleaved ADCs using adaptive I/Q signal processing. Analog Integrated Circuits and Signal Processing. 82(3):543-555. https://doi.org/10.1007/s10470-014-0476-9

Song X, Liu Z, Suhonen T, Varis T, Huang L, Zheng X, Zeng Y. 2015. Effect of melting state on the thermal shock resistance and thermal conductivity of APS ZrO2-7.5wt.% Y2O3 coatings. Surface and Coatings Technology. 270:132-138. https://doi.org/10.1016/j.surfcoat.2015.03.011

Song X, Suhonen T, Varis T, Huang L, Zheng X, Zeng Y. 2014. Fabrication and Characterization of Amorphous Alumina-Yttria-Stabilized Zirconia Coatings by Air Plasma Spraying. Journal of Thermal Spray Technology. 23(8):1302-1311. https://doi.org/10.1007/s11666-014-0124-z

Sorianello V, Colace L, Nardone M, Assanto G. 2011. Thermally evaporated single-crystal Germanium on Silicon. Thin Solid Films. 519(22):8037-8040. https://doi.org/10.1016/j.tsf.2011.06.023

Sorianello V, Colace L, Assanto G, Nardone M. 2011. Micro-Raman characterization of Germanium thin films evaporated on various substrates. Microelectronic Engineering. 88(4):492-495. https://doi.org/10.1016/j.mee.2010.10.028

Sorianello V, Colace L, Assanto G, Notargiacomo A, Armani N, Rossi F, Ferrari C. 2011. Thermal evaporation of Ge on Si for near infrared detectors: Material and device characterization. Microelectronic Engineering. 88(4):526-529. https://doi.org/10.1016/j.mee.2010.09.024

Štěpánková V, Paterová J, Damborský J, Jungwirth P, Chaloupková R, Heyda J. 2013. Cation-specific effects on enzymatic catalysis driven by interactions at the tunnel mouth. Journal of Physical Chemistry Part B. 117(21):6394-6402. https://doi.org/10.1021/jp401506v

Stepien M, Saarinen JJ, Teisala H, Tuominen M, Aromaa M, Kuusipalo J, Mäkelä J, Toivakka M. 2010. Adjustable wetting properties of paperboard by liquid flame spray process. teoksessa 11th Advanced Coating Fundamentals Symposium Proceedings: The Latest Advances in Coating Research and Development. Sivut 80-88.

Stumpel JE, Broer DJ, Schenning APHJ. 2014. Stimuli-responsive photonic polymer coatings. Chemical Communications. 50(100):15839-15848. https://doi.org/10.1039/c4cc05072j

Suihkonen R, Lindgren M, Siljander S, Sarlin E, Vuorinen J. 2016. Erosion wear of vinylester matrix composites in aqueous and acidic environments at elevated temperatures. Wear. 358-359:7-16. https://doi.org/10.1016/j.wear.2016.03.026

Suokas E, Kuusipalo J. 2018. Process time importance in the product properties evolvement during extrusion coating of different LDPE grades. teoksessa 15th TAPPI Advanced Coating Fundamentals Symposium 2018: Charlotte; United States; 14 April 2018 through 15 April 2018. TAPPI Press. Sivut 151-159.

Sutka A, Timusk M, Joost U, Ignatans R, Maiorov M. 2018. Switchable light reflectance in dilute magneto-optical colloids based on nickel ferrite nanowires. e-Journal of Surface Science and Nanotechnology. 16:119-121. https://doi.org/10.1380/ejssnt.2018.119

Takahashi H, Maruyama K, Karino Y, Morita A, Nakano M, Jungwirth P, Matubayasi N. 2011. Energetic origin of proton affinity to the air/water interface. Journal of Physical Chemistry Part B. 115(16):4745-4751. https://doi.org/10.1021/jp2015676

Tamminen P, Viheriäkoski T, Sydänheimo L, Ukkonen L. 2015. ESD qualification data used as the basis for building electrostatic discharge protected areas. Journal of Electrostatics. 77:174-181. https://doi.org/10.1016/j.elstat.2015.08.009

Thomann O, Pihlatie M, Rautanen M, Himanen O, Lagerbom J, Mäkinen M, Varis T, Suhonen T, Kiviaho J. 2013. Development and application of HVOF sprayed spinel protective coating for SOFC interconnects. Journal of Thermal Spray Technology. 22(5):631-639. https://doi.org/10.1007/s11666-012-9880-9

Timr Š, Brabec J, Bondar A, Ryba T, Železný M, Lazar J, Jungwirth P. 2015. Nonlinear Optical Properties of Fluorescent Dyes Allow for Accurate Determination of Their Molecular Orientations in Phospholipid Membranes. Journal of Physical Chemistry Part B. 119(30):9706-9716. https://doi.org/10.1021/acs.jpcb.5b05123

Tkalich D, Li CC, Kane A, Saai A, Tkalich D, Yastrebov VA, Hokka M, Kuokkala V-T, Bengtsson M, From A. 2017. Wear of cemented tungsten carbide percussive drill–bit inserts: Laboratory and field study. Wear. 386-387:106-117. https://doi.org/10.1016/j.wear.2017.05.010

Tofanello A, Freitas ALM, Carvalho WM, Salminen T, Niemi T, Souza FL. 2020. Hematite Surface Modification toward Efficient Sunlight-Driven Water Splitting Activity: The Role of Gold Nanoparticle Addition. Journal of Physical Chemistry C. https://doi.org/10.1021/acs.jpcc.9b11966

Tuominen J, Näkki J, Pajukoski H, Hyvärinen L, Vuoristo P. 2016. Microstructural and abrasion wear characteristics of laser-clad tool steel coatings. Surface Engineering. 32(12):923-933. https://doi.org/10.1080/02670844.2016.1180496

Tuominen M, Teisala H, Haapanen J, Mäkelä JM, Honkanen M, Vippola M, Bardage S, Wålinder MEP, Swerin A. 2016. Superamphiphobic overhang structured coating on a biobased material. Applied Surface Science. 389:135-143. https://doi.org/10.1016/j.apsusc.2016.05.095

Tuurna S, Varis T, Penttilä K, Ruusuvuori K, Holmström S, Yli-Olli S. 2011. Optimised selection of new protective coatings for biofuel boiler applications. Materials and Corrosion-Werkstoffe und Korrosion. 62(7):642-649. https://doi.org/10.1002/maco.201005898

Vaikuntam SR, Stöckelhuber KW, Subramani Bhagavatheswaran E, Wießner S, Scheler U, Saalwächter K, Formanek P, Heinrich G, Das A. 2018. Entrapped Styrene Butadiene Polymer Chains by Sol-Gel-Derived Silica Nanoparticles with Hierarchical Raspberry Structures. Journal of Physical Chemistry B. 122(6):2010-2022. https://doi.org/10.1021/acs.jpcb.7b11792

Välimäki H, Verho J, Kreutzer J, Kattipparambil Rajan D, Ryynänen T, Pekkanen-Mattila M, Ahola A, Tappura K, Kallio P, Lekkala J. 2017. Fluorimetric oxygen sensor with an efficient optical read-out for in vitro cell models. Sensors and Actuators B: Chemical. 249:738-746. https://doi.org/10.1016/j.snb.2017.04.182

Valtonen K, Ratia V, Ramakrishnan KR, Apostol M, Terva J, Kuokkala V-T. 2019. Impact wear and mechanical behavior of steels at subzero temperatures. Tribology International. 129:476-493. https://doi.org/10.1016/j.triboint.2018.08.016

Valtonen K, Ojala N, Haiko O, Kuokkala V-T. 2019. Comparison of various high-stress wear conditions and wear performance of martensitic steels. Wear. 426-427(Part A):3-13. https://doi.org/10.1016/j.wear.2018.12.006

Varis T, Suhonen T, Calonius O, Čuban J, Pietola M. 2016. Optimization of HVOF Cr3C2-NiCr coating for increased fatigue performance. Surface and Coatings Technology. 305:123-131. https://doi.org/10.1016/j.surfcoat.2016.08.012

Varis T, Bankiewicz D, Yrjas P, Oksa M, Suhonen T, Tuurna S, Ruusuvuori K, Holmström S. 2015. High temperature corrosion of thermally sprayed NiCr and FeCr coatings covered with a KCl-K2SO4 salt mixture. Surface and Coatings Technology. 265:235-243. https://doi.org/10.1016/j.surfcoat.2014.11.012

Varis T, Suhonen T, Ghabchi A, Valarezo A, Sampath S, Liu X, Hannula SP. 2014. Formation mechanisms, structure, and properties of HVOF-sprayed WC-CoCr coatings: An approach toward process maps. Journal of Thermal Spray Technology. 23(6):1009-1018. https://doi.org/10.1007/s11666-014-0110-5

Varis T, Suhonen T, Jokipii M, Vuoristo P. 2020. Influence of powder properties on residual stresses formed in high-pressure liquid fuel HVOF sprayed WC-CoCr coatings. Surface and Coatings Technology. 388. https://doi.org/10.1016/j.surfcoat.2020.125604

Varis T, Suhonen T, Laakso J, Jokipii M, Vuoristo P. 2020. Evaluation of Residual Stresses and Their Influence on Cavitation Erosion Resistance of High Kinetic HVOF and HVAF-Sprayed WC-CoCr Coatings. Journal of Thermal Spray Technology. https://doi.org/10.1007/s11666-020-01037-2

Vazdar M, Jungwirth P, Mason PE. 2013. Aqueous guanidinium-carbonate interactions by molecular dynamics and neutron scattering: Relevance to ion-protein interactions. Journal of Physical Chemistry Part B. 117(6):1844-1848. https://doi.org/10.1021/jp310719g

Vazdar M, Jurkiewicz P, Hof M, Jungwirth P, Cwiklik L. 2012. Behavior of 4-hydroxynonenal in phospholipid membranes. Journal of Physical Chemistry Part B. 116(22):6411-6415. https://doi.org/10.1021/jp3044219

Vikholm-Lundin I, Auer S, Paakkunainen M, Määttä JAE, Munter T, Leppiniemi J, Hytönen VP, Tappura K. 2012. Cysteine-tagged chimeric avidin forms high binding capacity layers directly on gold. Sensors and Actuators B: Chemical. 171-172:440-448. https://doi.org/10.1016/j.snb.2012.05.008

Vikholm-Lundin I, Auer S, Hellgren AC. 2011. Detection of 3,4-methylenedioxymethamphetamine (MDMA, ecstasy) by displacement of antibodies. Sensors and Actuators B: Chemical. 156(1):28-34. https://doi.org/10.1016/j.snb.2011.03.069

Virkki K, Demir S, Lemmetyinen H, Tkachenko NV. 2015. Photoinduced Electron Transfer in CdSe/ZnS Quantum Dot-Fullerene Hybrids. Journal of Physical Chemistry C. 119(31):17561-17572. https://doi.org/10.1021/acs.jpcc.5b04251

Virkki K, Hakola H, Urbani M, Tejerina L, Ince M, Martínez-Díaz MV, Torres T, Golovanova V, Golovanov V, Tkachenko NV. 2017. Photoinduced Electron Injection from Zinc Phthalocyanines into Zinc Oxide Nanorods: Aggregation Effects. Journal of Physical Chemistry C. 121(17):9594-9605. https://doi.org/10.1021/acs.jpcc.7b01562

Vuori L, Ali-Löytty H, Lahtonen K, Hannula M, Lehtonen E, Niu Y, Valden M. 2017. Improved corrosion properties of Hot Dip Galvanized Steel by nanomolecular silane layers as hybrid interface between zinc and top coatings. Corrosion. 73(2). https://doi.org/10.5006/2206

Vuorinen E, Heino V, Ojala N, Haiko O, Hedayati A. 2018. Erosive-abrasive wear behavior of carbide-free bainitic and boron steels compared in simulated field conditions. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 232(1):3-13. https://doi.org/10.1177/1350650117739125

Vuoristo P, Varis T, Meschini D, Bolelli G, Lusvarghi L. 2019. Corrosion properties of thermally sprayed bond coatings under plasma sprayed chromia coating in sulfuric acid solutions. Azarmi F, Lau Y, Veilleux J, Widener C, Toma F, Koivuluoto H, Balani K, Li H, Shinoda K, Toimittajat. teoksessa International Thermal Spray Conference and Exposition, ITSC 2019: New Waves of Thermal Spray Technology for Sustainable Growth. ASM International. Sivut 923-930. (Proceedings of the International Thermal Spray Conference).

Werner J, Wernersson E, Ekholm V, Ottosson N, Öhrwall G, Heyda J, Persson I, Söderström J, Jungwirth P, Björneholm O. 2014. Surface behavior of hydrated guanidinium and ammonium ions: A comparative study by photoelectron spectroscopy and molecular dynamics. Journal of Physical Chemistry Part B. 118(25):7119-7127. https://doi.org/10.1021/jp500867w

Wernersson E, Heyda J, Vazdar M, Lund M, Mason PE, Jungwirth P. 2011. Orientational dependence of the affinity of guanidinium ions to the water surface. Journal of Physical Chemistry Part B. 115(43):12521-12526. https://doi.org/10.1021/jp207499s

Yury K, Filippov M, Makarov A, Malygina I, Soboleva N, Fantozzi D, Andrea M, Koivuluoto H, Vuoristo P. 2018. Arc-sprayed Fe-based coatings from coredwires for wear and corrosion protection in power engineering. Coatings. 8(2). https://doi.org/10.3390/coatings8020071